PTPDBTST Fails w/ Error: Unable to find library 'libcobrts64.sl.2'
Hi
I am on PeopleSoft HCM 9.1 with PT 8.51 and database Oracle 11g Release 1. I have compiled and linked COBOL programs. Now when I run PTPDBTST from PIA I get below error message:
/usr/lib/pa20_64/dld.sl: Unable to find library 'libcobrts64.sl.2'.
Any ideas would be helpful
Thanks
Pankil Shah
Edited by: Pankil on Apr 27, 2012 1:07 PM
Hello All~
I had opened a Case with Oracle Support and the problem got resolved when I reconfigured process scheduler. Apparently Process Scheduler Env file did not have SHLIB_PATH with $COBDIR/lib. Once process scheduler was reconfigured PTPDBTST was successfully posted from PIA.
It has been documented under E-COB: ld.so.1: PSRUN: fatal: libcobrts64.so.2: open failed: No such file [ID 660015.1]
Thank you for your inputs.
Pankil Shah
Edited by: Pankil on May 2, 2012 12:27 PM
Edited by: Pankil on May 2, 2012 12:28 PM
Similar Messages
-
SAPDBA gives error Unable to find library 'libclntsh.sl.8.0'
Hello All,
I brought up a new QAS system by copying oracle and sap executables, followed by restore from online backup.
i followed the post described below:
How to build a new SAP system
The oracle DB is up and running and sap is also up.
When i try to execute sapdba,logged in as both SID<adm> and ora<SID>
I get the follwoing error:
<b>/usr/lib/pa20_64/dld.sl: Unable to find library 'libclntsh.sl.8.0'.
Segmentation fault</b>
other tools like svrmgrl and sqlplus works fine.
Upon investigation i found that, i did not copy /oracle/client and that is causing this error.
I copied the following /oracle directories
/oracle/SID
/oracle/version_number
/oracle/stage
I did not copy the following directories
/oracle/client
/oracle/oraInventory
/oracle/jre
/oracle/oui
Since the system is up and running already , is it ok for me to copy the left out directories now? Also are they all needed essentially or just /oracle/client is enough.
Please help me as this is very urgent task. Any help with be greatly appreciated with points.
Thanks,
Basis learnerHello Prince,
I followed your guidelines to build this QA system. Thanks a lot for that. Copied the executables of oracle and sap and restored from online backup.
The System is up and running. Only sapdba command is giving the error message.
I copied the oracle executable from PRD to QAS and i didnot install from scratch.
The SAP version is 4.6B running on Oracle 8.1.7.4 over HP-UX11i
My concern if i bring down both SAP and DB and copy over the /oracle/Client directory from PRD to QAS , will it cause any issue in bringing the system backup?
also this error from sapdba, is it caused due to missing /client directory only?
Oracle Metalink says:
Stop the instance and listener and then recreate LIBCLNTSH.SL.8.0:
1. %cd $OH/bin
2. %genclntsh64
Then relink : relink utilities
But this fix is for the symptom:
<b>symptom: Running SQLLDR gives error</b>
In My case, the symptom is Running sapdba gives this error
what will be the impact if i do so now? any directions will be greatly appreciated.
Please guide.
Thanks in Advance,
Basis Learner -
Hi All,
Getting following error while starting up the SAP.
4 ETW000 167 0.000980
4 ETW000 [dlux.c ,00000] *** ERROR => DlLoadLib: dlopen()= Unable to find library 'libwtc9.sl'. -> DLENOACCESS (0,Error
0)
4 ETW000 2302 0.003282
4 ETW000 [dbcon.c ,00000] *** ERROR => Couldn't load library '/usr/sap/DA1/SYS/exe/run/dboraslib.sl'
4 ETW000 48 0.003330
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/DA1/SYS/exe/run') or dbms_type ('OR
A')"
thanks,
AnuHi,
Two oracle library files are missing. Please check it again.
1. Unable to find library 'libwtc9.sl'.
A. This file is not available in /usr/sap/DA1/SYS/exe/run. Check if its not there copy from kernel cd or DVD or some another systems in to the above path.
2. Couldn't load library '/usr/sap/DA1/SYS/exe/run/dboraslib.sl'
A. This file is not available in /usr/sap/DA1/SYS/exe/run. Check if its not there copy from kernel cd or DVD or some another systems in to the above path.
3. Finally, check ENV variales at OS level for sidadm.
sidadm> type env and check DBMS_TYPE =?
Put exact DBMS type here. if its not there export it in to env variables.
4. Check DIR_LIBRARY = /usr/sap/DA1/SYS/exe/run ..it should be like this.
Regards,
Srini Nookala -
Backint failed "ERROR: unable to find file "
Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
FethiThis is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name Value
oracle_sid BWP
oracle_home /oracle/BWP/102_64
oracle_profile /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home /oracle/BWP
sap_profile /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode ALL
backup_type offline
backup_dev_type util_file
util_par_file /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info 700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info linuxx86_64 OCI_102 Feb 8 2008
command_line brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter Value
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination /oracle/BWP/oraarch/BWParch
Archive format %t_%s_%r.dbf
Oldest online log sequence 27
Next log sequence to archive 30
Current log sequence 30 SCN: 88160883
Database block size 8192 Thread: 1
Current system change number 88168768 ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data1 17498636288 4 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data2 16450060288 5 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data3 15820914688 6 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP700 ONLINE* ONLINE+ /oracle/BWP/sapdata2/BWM700.data1 15128862720 11 64784 NOLINK FILE 34359721984 104857600 8192
PSAPBWP700 ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM700.data2 4132511744 12 64785 NOLINK FILE 34359721984 8192 8192
PSAPBWPDIM ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMdim.data1 4202700800 7 64770 NOLINK FILE 10485760000 20971520 8192
PSAPBWPFACT ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMfact.data1 6719283200 8 64770 NOLINK FILE 34359721984 20971520 8192
PSAPBWPODS ONLINE* ONLINE+ /oracle/BWP/sapdata2/BWMods.data1 19868426240 9 64784 NOLINK FILE 34359721984 20971520 8192
PSAPBWPUSR ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMusr.data1 239083520 10 64770 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE+ ONLINE+ /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1 134225920 20 64785 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ /oracle/BWP/sapdata1/temp_1/temp.data1 10485768192 -1 64770 NOLINK FILE 34358689792 20971520 8192
PSAPUNDO ONLINE- ONLINE+ /oracle/BWP/sapdata1/undo_1/undo.data1 1073750016 2 64770 NOLINK FILE 34359721984 20971520 8192
SYSAUX ONLINE* ONLINE+ /oracle/BWP/sapdata1/sysaux_1/sysaux.data1 671096832 3 64770 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ /oracle/BWP/sapdata1/system_1/system.data1 838868992 1 64770 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
/oracle/BWP/origlogA/log_g11m1.dbf 52429312 1 64774 INUSE NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf 52429312 1 64776 INUSE NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf 52429312 2 64775 INUSE NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf 52429312 2 64777 INUSE NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf 52429312 3 64774 INUSE NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf 52429312 3 64776 INUSE NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf 52429312 4 64775 INUSE NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf 52429312 4 64777 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf 34979840 0 64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf 34979840 0 64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf 34979840 0 64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program: /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File: /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile: /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function: BACKUP
Backup Type: BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards -
Dear all,
Whill installing sap 4.7 database instance in HPIA64 , i got error mes like
ERROR 2008-03-03 22:26:31
MUT-03010 Execution of the command "/sapmnt/C2P/exe/brconnect -u / -c -f crsyn -o SAPC2P" finished with status TST_ERROR.
cat brconnect.1.log
/usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.10.1'.
Please let me what will be the problem .
Regards,
satich -kHi,
The SAP DBSL (dboraslib.so) will search for the Oracle client shared library in the following paths in this order of precedence:
On 64-Bit platforms:
a. /oracle/client/10x_64/instantclient
b. /oracle/client/10x_64/lib
c. /oracle/db_sw/10x_64/instantclient
d. /oracle/db_sw/10x_64/software/lib
On 32-Bit platforms:
a. /oracle/client/10x_32/instantclient
b. /oracle/client/10x_32/lib
c. /oracle/db_sw/10x_32/instantclient
d. /oracle/db_sw/10x_32/software/lib
If the client can't be found in the first path, then the second will be searched and so on. The instant client path is the same for Oracle Release 10.1 and 10.2. The path can only differ from 64 bit to 32 bit.
Thus, to solve your problem, create a dynamic link in the oracle client directory like this (for Unix 64-Bit):
cd /oracle/client/10x_64
ln -s /oracle/client/10x_64/lib lib
regards,
kaushal -
I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
at adobe.abc.Domain.resolveTypeName(Domain.java:231)
at adobe.abc.Domain.resolveTypeName(Domain.java:148)
at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error. -
Unable to find library 'libnnz10.sl'
Hi everybody,
we made a Discoverer clone (from an old server to a new one) and we replicated all the Discoverer installation, but now, I have a problem when I try to connect to Discoverer Plus or Viewer (to the new server).
When I launch the command opmnctl startall (to start up all the Discoverer Processes) I see these errors:
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=gnvmig:6200
5 of 7 processes started.
ias-instance id=disco10g.gnvmig
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=26275)
failed to start a managed process after the maximum retry limit
Log:
/appl/nttdbora/8.0.6/disco10g/opmn/logs/WebCache~WebCache~1
ias-component/process-type/process-set:
WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=26276)
failed to start a managed process after the maximum retry limit
Log:
/appl/nttdbora/8.0.6/disco10g/opmn/logs/WebCache~WebCacheAdmin~1
and, inside the log (WebCache~WebCache~1 and WebCache~WebCacheAdmin~1) I found always the same message:
09/04/14 15:01:53 Start process
/usr/lib/pa20_64/dld.sl: Unable to find library 'libnnz10.sl'.
Now, on metalink I found the Doc ID: 359591.1 where inside there is the note *4926017 : "UNABLE TO FIND LIBRARY 'LIBNNZ10.SL'" ERROR IN OPMN CONFIG*
I don't know exactly if I have this could be the problem....Maybe I missed something on the new server.....
Please, anybody knows if I have to set up something or launch a file to configure the new server in order to avoid the error above ?
Thanks in advance
AlexMichael,
Actually, you can clone Application Servers across hosts (including Discoverer). :-)
Check out:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm
Oracle® Application Server Administrator's Guide 10g Release 2 (10.1.2)
Chaptere 10 for Discoverer specific (not Chapter 11)
Additionally, for middle-tiers you can change the hostname and IP address and then run the change IP/host script $OH/chgip/scripts/chgiphost.sh (.bat for Windows)
This script is called in the cloning process when you provide source and target/destination information
For Infrastrucure, you can only change the IP address; it is not allowed to change the hostname.
Alex,
1. I would check your LD_LIBRARY_PATH and SHLIB_PATH to make sure it is correct and can find the shared library
2. If not, then you may need to relink the webcache (i.e. - per that document you posted)
After ensuring all processes are stopped, perform the following commands to relink Oracle Web Cache:
cd $ORACLE_HOME/webcache/lib
/usr/ccs/bin/make -f ins_calypso.mk install
3. If still a problem, you may want to check on a WebCache specific forum -
Hi all,
i try to use pfi with a project that i did with air in flash builder.
I make my swf with ant task
<target name="releasecompile" depends="init">
<echo>
Ant Task :: releaseCompile
</echo>
<java jar="${MXMLC.JAR}" fork="true" failonerror="true">
<arg value="-debug=false"/>
<arg value="+flexlib=${SDK_HOME}frameworks"/>
<arg value="+configname=air"/>
<arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
<arg value="-output=${build}/${APP_ROOT_FILE}"/>
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
</java>
</target>
i have a swf in result and i play pfi like this
./pfi -package -target ipa-ad-hoc -provisioning-profile /Users/stef/Desktop/PROJECT/PROJECT_Config-2.mobileprovision -storetype pkcs12 -keystore /Users/stef/Desktop/PROJECT/Certificats2.p12 -storepass mypass /Users/stef/Desktop/PROJECT/PROJECTConfig.ipa /Users/stef/Documents/Adobe\ Flash\ Builder\ 4/PROJECT/src/PROJECTConfigurateur-app.xml -C /Users/stef/Desktop/PROJECT/ PROJECTConfigurateur.swf Default.png icons/Icon57.png icons/Icon29.png icons/Icon512.png
Exception in thread "main" java.lang.Error: Unable to find named traits: org.puremvc.as3.multicore.patterns.facade::Facade
at adobe.abc.Domain.resolveTypeName(Domain.java:195)
at adobe.abc.Domain.resolveTypeName(Domain.java:112)
at adobe.abc.GlobalOptimizer$InputAbc.resolveTypeName(GlobalOptimizer.java:274)
at adobe.abc.GlobalOptimizer$InputAbc.readInstance(GlobalOptimizer.java:837)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:388)
at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:280)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:160)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcode(AOTCompiler.java:329)
at com.adobe.air.ipa.AOTCompiler.GenerateMacBinary(AOTCompiler.java:600)
at com.adobe.air.ipa.IPAOutputStream.compileRootSwf(IPAOutputStream.java:196)
at com.adobe.air.ipa.IPAOutputStream.finalizeSig(IPAOutputStream.java:366)
at com.adobe.air.ADTPackager.createPackage(ADTPackager.java:65)
at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:165)
at com.adobe.air.ADTEntrypoint.parseArgsAndGo(ADTEntrypoint.java:132)
at com.adobe.air.ipa.PFI.parseArgsAndGo(PFI.java:152)
at com.adobe.air.ADTEntrypoint.run(ADTEntrypoint.java:68)
at com.adobe.air.ipa.PFI.main(PFI.java:112)
do you have some ideas about this ?
Regards
StefOk,
<target name="releasecompile" depends="init">
<echo>
Ant Task :: releaseCompile
</echo>
<java jar="${MXMLC.JAR}" fork="true" failonerror="true">
<arg value="-debug=false"/>
<arg value="+flexlib=${SDK_HOME}frameworks"/>
<arg value="+configname=air"/>
<arg value="-file-specs=${MAIN_SOURCE_FILE}"/>
<arg value="-output=${build}/${APP_ROOT_FILE}"/>
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
</java>
</target>
I mistake this line
<arg value="-external-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5. swc" />
must be
<arg value="-library-path+=${APP_ROOT}/libs/PureMVC_AS3_MultiCore_1_0_5.swc" />
for include the content in the swf.
Regards
Stef -
Hi
Using Oracle 10.2 , HP-UX 11.23, ECC 6.0 SR3. I am running sapinst with homogeneous system copy option. Database already restored and opened properly. Getting error during backup/restore step -creating the password file. Looking at the sapinst logs it says /usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.10.1'
The Library Paths defined are below:
For user qasadm
DIR_LIBRARY=/usr/sap/QAS/SYS/exe/run
SHLIB_PATH=/usr/sap/QAS/SYS/exe/run:/oracle/client/10x_64/instantclient
For oraqas
DIR_LIBRARY=/usr/sap/QAS/SYS/exe/run
SHLIB_PATH=/usr/sap/QAS/SYS/exe/run:/oracle/QAS/102_64/lib
I have checked OSS Note 819829. Verified the path /oracle/client/10x_64/
all the files look good. The permissions and ownership are all correct under /oracle
The sapinst is supposed to install the client.
In /exe directory
:qasadm 22> ldd dboraslib.so
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libclntsh.so.10.1 => /oracle/client/10x_64/instantclient/libclntsh.so.10.1
libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
libc.so.1 => /usr/lib/hpux64/libc.so.1
libxti.so.1 => /usr/lib/hpux64/libxti.so.1
libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
R3trans -d -v works fine
RC = 0000
qasadm 31> ./genezi -v
Client Shared Library 64-bit - 10.2.0.5.0
System name: HP-UX
Release: B.11.23
Version: U
Machine: ia64
The above does not show which mode the client is running (InstantClient Mode or Oracle Home Mode)
qasadm 33> cd /oracle/client/10x_64/instantclient
qasadm 34> ls -ltr
total 254056
-rwxrwxrwx 1 qasadm sapsys 83768 Feb 24 2011 genezi
-rwxrwxrwx 1 qasadm sapsys 67574560 Feb 24 2011 libociei.so
-rwxrwxrwx 1 qasadm sapsys 51705200 Feb 24 2011 libclntsh.so.10.1
-rwxrwxrwx 1 qasadm sapsys 2165720 Feb 24 2011 ojdbc6.jar
-rwxrwxrwx 1 qasadm sapsys 1576737 Feb 24 2011 ojdbc14.jar
-rwxrwxrwx 1 qasadm sapsys 1628358 Feb 24 2011 classes12.jar
-rwxrwxrwx 1 qasadm sapsys 5337360 Feb 24 2011 libnnz10.so
-rwxrwxrwx 1 qasadm sapsys 1474 Feb 24 2011 SAPIC_README
lrwxrwxrwx 1 qasadm sapsys 17 Dec 29 19:03 libclntsh.so -> libclntsh.so.10.1
qasadm 35> ldd libclntsh.so.10.1
libnnz10.so => /oracle/client/10x_64/instantclient/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libnsl.so.1 => /usr/lib/hpux64/libnsl.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
libxti.so.1 => /usr/lib/hpux64/libxti.so.1
So basically the file libclntsh.so.10.1 does exist and is in the path defined in the environment variable.
Any idea experts why it cant find the library?Thanks. Actually its the other way round. The 10.2.0.5 you see is the Client version. The database is at 10.2.0.2. But thats not an issue. This is resolved now. Issue was sapinst was running with root and trying to start the listener and create the password file which I could do successfully manually with oraSID but not with root. Not sure why sapinst did not switch to orasid to do that
Had to do two things:
1) Set the correct environment variables for root (it was already good for sidadm and orasid bu must be done for root as well)
2) Recreate the links (with ln -fs) for an older installation we had that was recently uninstalled. -
Digital Signature- SSF error: Unable to find external security product
Dear Friends,
After I enter my User ID and Password, this displays this error !!!
SSF error: Unable to find external security product
Would really appreciate your help.
Thanks,
SriHi Sri,
Would you pls check the installation of the security toolkit on your application server?
Which security product do you use?
The standard security product is SAPSECULIB (library sapsecu.dll).
Please check the SSF initialization messages which are contained in each dev_w## developer trace (transaction ST11). When successful, the initializaion messages look like this:
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/<SID>/SYS/exe/run/sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
General information for SAPSECULIB can be found in SAP note 354819.
Best regards,
Christoph
P.S.: Please reward points for useful information. -
AutoPatch error: Unable to find job when restart
OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SHError: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein -
Graphics Error: Unable to find suitable font!
I am trying to use the program rasmol (that displays molecules), and I get the error:
Graphics Error: Unable to find suitable font!
I installed rasmol by
pacman -Sy rasmol
today for version 2.7.3-2
also did I do a system upgrade today:
pacman -Suy
the section "Files" in /etc/X11/xorg.conf contains:
ModulePath "/usr/lib/xorg/modules"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util"
I have added all directories in /usr/share/fonts to be sure and restarted X.
I tried installing all font packages that I could find, but the error is still the same:
#pacman -Q | grep font
font-bh-ttf 1.0.0-2
fontcacheproto 0.1.2-1
fontconfig 2.3.2-6
fontsproto 2.0.2-1
gsfonts 8.11-3
libfontenc 1.0.2-1
libxfont 1.1.0-1
libxfontcache 1.0.2-1
ttf-ms-fonts 1.3-8
xorg-font-utils 1.0.1-1
xorg-fonts-alias 1.0.1-1
xorg-fonts-encodings 1.0.0-1
xorg-fonts-misc 1.0.0-2
#pacman -Q | grep ttf
font-bh-ttf 1.0.0-2
sdl_ttf 2.0.8-1
ttf-bitstream-vera 1.10-4
ttf-cheapskate 2.0-4
ttf-isabella 1.003-2
ttf-junicode 0.6.5pre20051126-2
ttf-ms-fonts 1.3-8
I removed the fonts.dir and fonts.scale in /usr/share/fonts and /usr/share/fonts/TTF and did mkfontscale and mkfontdir
to replace them.
restarting X and retrying to run rasmol still gives the same error.
I have tried to search google for the error message but all I could find was the source code that probably produced the message:
http://www.bernstein-plus-sons.com/soft … c/x11win.c
and some redhat binary file that gives some fonts seemingly along with the error message:
http://www.bernstein-plus-sons.com/cgi- … smol_16BIT
...Options^@Colours^@Display^@File^@Graphics Error: %s!^@-*-*-bold-o-normal-*-14-*^@-*-serf-bold-o-normal-*-14-*^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@-*-helvetica-bold-o-normal-*-14-*^@Unable to find suitable font^@%x %s^@Comm....
which might be an indication for which fonts I need.
Could anyone please give me some assistance to get the program working,
perhaps by giving advise on how to install the abovementioned fonts
or anything else that I have failed to do.
I would really appreciate it , thanxHey,
i too get the same error that no suitable fonts could be found. I installed all the fonts mentioned in this thread. My Section "Files" looks like this:
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/util
EndSection
Still the error occurs. Does somebody know how to fix this?
greetings koelle -
Error: Unable to find all subVIs from saved VIs.
TestStand 2010 SP1, LabVIEW 2011, WinXP
Trying to build a deployment in TestStand.
During the build, I get the now-infamous popup:
Title: "Save Modified VIs?"
Text: "An error occured while trying to read the dependencies of your VIs; a possible cause for this problem is VIs not saved in the current version of LabVIEW. Would you like to save any modified VIs now?"
I select "yes", and the build then fails with errors in the log pane of the "Build Status" window. The error is:
Error: Unable to find all subVIs from saved VIs, either a subVI is missing or the VI is not saved under the current LabVIEW version.
The missing file path is: etc, etc.
I go to said missing path. The VI is in fact present. I open the VI and do "Save All", try again. Same thing. Then, I try a Mass Compile on the test VI directory. Attempt to build again, same error.
Note that I do call some VIs dynamically, but those are all present in my workspace, and are not found in this error.
Is there a debugging option or log file or some kind of trace I can do to dig into this and find out the state of things causing the error? Please help me out here.
-AndyOne quick way to narrow down the issue is to change your LabVIEW adapter to Run-Time engine and then try and run the sequence in the Sequence Editor.
Also, triple check your search directories and make sure you're not pulling in VIs from an unexpected location.
When you see that dialog it's already too late to save so trying to Save at that point never works.
Another tip is to ignore which VIs it says are not saved in the current version and instead look at the subVIs that those VIs are calling. You can run into this if you have two subVIs loaded with the same name.
CTA, CLA, MTFBWY -
Error: Unable to find sources for current Linux Kernel
Hi Guys,
Hit a bump !!!!
Oracle Linux x86-64 installed successfully via Oracle VM box.
Clicked on 'Install Guest Additions'.
Ran VboxLinuxAdditions.run to install the Guest machine on Linux. It Failed and in error log (/var/log/vboxinstall.log) got the below error:-
Error: Unable to find sources for current Linux Kernel. Specify KERN_DIR=<directory> and run again
Looking upto Google i found I need to update Linux headers , in doing so get +'bash: apt-get : command not found'+ which I am not able to understand.
Any assistance is appreciated.
CheersThanks for the information. I was able to resolve it though.
Ran +'yum install gcc kernel-devel kernel-headers'+
Hence my query is resolved now.
Just one question - I need to copy text from Windows to Linux Terminal. Is there a command I can type into Linux terminal to enable copy paste from Windows to Linux and vice-versa ?
Cheers. -
Error- Unable to find error text for this exception
Hi all,
I am facing the following problem in discoverer ,Please give me your advice.
while I am trying to open the workbook I am getting the following error
"Unable to find error text for this exception"
Could you please tell me how I can find why this warning is come ? or how I can solve this warning.
if I ignore this warning then the workbook is failing to open.
thanks and regards
senthil kumarHi,
Are you getting this problem with the Desktop, Plus or Viewer editions? It could be that the database is generating the exception. You will need to trace the database session to see the error.
Rod West
Maybe you are looking for
-
Error in Scheduling a report via FTP option in WEBI
Hi, I am not able to schedule my report via FTP. Im putting in the details correctly. Would like to confirm what value should be mentioned in port, the servers port? and account refers to the user Id on the server ? It is giving the following error :
-
Xorg problem? toshiba satellite L755D, radeon
Uhg ... so I've been searching trying figure this out past two days no luck. I'm not 100% sure what I did before. I did do a full update this week and now I can not startx. Hopefully someone can help me I think I'm missing something. Attached log fil
-
i have made a question pool of some 30 questions various types.... fill in the blanks, matching, multiple choice etc now i want to create a quiz of some random 10 questions.... one question on each slide. at the end i want the result to be declared.
-
Why a site that has follow content disable can be follow from my site
Hi, this is my question. I have a site where Follow Content feature is deactivated, so, the follow icon doesn't appear. Now, If I search the site from MySite, I can find the site, click on the elipsis and click on Follow, so, if the site has this fea
-
Did Apple change the screensaver settings?
I use to be able to choose one of my iPhoto album to use as the screensaver. In the past week I've noticed that my screensaver settings is using the National Geographic photos and I'm unable to go back and select when of my iPhoto albums. Why?? Anyon