Published page has overlap photos on text

the address is http:// web.mac.com/lyndageocook
Why are the photos overlapping text? Everything looks great on the webpage canvas
macbook   Mac OS X (10.4.8)  

Lynda,
May I make a couple of points:
1) This is the iTunes forum, I think you need the iWeb forum
2) There is no apostrophe in its when you write "oceanfront living at its best" or "One bedroom also has a seating area of its own"
3) Right now I can't see what the problem might be, but the folks in the iWeb forum may have an idea.
4) Welcome to the discussion forums!!
Cheers
Vince

Similar Messages

  • Published page has photos over the text

    Everything looks right on the webpage canvas where I designed the welcome page. I then clicked "publish" . Next I went to view the published site and there are photos overlapping the text. How did that happen? And want do I do to get it to look like I set it up on the canvas ?
    macbook   Mac OS X (10.4.8)   the address is http:// web.mac.com/lyndageocook
    macbook   Mac OS X (10.4.8)  

    I have run into this and sometimes you just have to go back reposition them and publish again. Would you be interested in wrapping the text around the pictures? To do this select the area you would like to put the picture, go to insert and select choose, then find your picture and open it. This will put it in the iweb page where you selected it to go. Next open up the inspector and click on the text tab, select wrap, and then check the box that says object causes wrap. Once you click this you will see the text position around your picture. You can reposition your picture and the text will follow. I think that would be a great feature for your page. Good luck!

  • Hp c7180. Test page has got lines across text and colours.

    My Hp photosmart c7180 is not printing to a good quality.
    My problems started when the cleaning mechanism was not able to go back to the home position and this then caused the print head to slam up to the cleaning mechanism (there is two plastic tabs that it hit). I then went inside the machine and found that the cleaning mechanism is on a runner with the rubber and a few other things. I freed up this mechanism and got it to slide up and down several times. i then put the machine back together printed a test page and the inks were very faint. After cleaning the head and doing an alignment several times, the inks are becoming more clear but still not right. There is a lot of lines through the text and the blocks of colour.
    I did a print of a page of small text and the quality was fine. I printed a picture in greyscale and it has greens and reds in it. Also the larger text is blurred on some lines (not all the text on the same line is blurred)
    What do i do now ??
    There is also a roller that is spinning more than it used to. This is located underneath the print head towards the back of the printer.( It is connected to the little cogs on the left which pump the ink to the heads i think) Any suggestions on this would also be greatly appreciated.
    Many thanks
    Stephen

    Thank you for the detailed post rileyc.
    I would like to help you with the printing issue you are experiencing. I understand the issue seems to be related to the ink system or potentially the driver. The best plan of attack is to narrow down the root cause.
    Can you please perform a colour copy that contains black spots too? I would like to see if the printer hardware can duplicate a page without any quality issues. Please let me know the outcome of the copy and we can go from there. Thanks
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Published Page has Inactive Links

    So, I finally got it all together...
    Using iWeb and Transit, I was able to get my homepage up, but the links to the other pages (navigation menu) is not working.
    What I did: I hid the default navigation menu and created my own. In iWeb, the links work fine. Slowly, but fine. I clicked publish, saved it to my file and uploaded using Transit.
    I went to the site, several times over several hours, and each time the home page came up but the navigation menu was dead.
    I double checked, made sure to make all the links active in iWeb, republished, reuploaded and waited. Checked again, and still dead links.
    Please tell me I don't have to lose my design and use the crappy default navigation menu.
    What I think is the problem is where I'm moving my files to Transmit, but it seems to be working beautifully until it gets from Transmit to the web. No error messages, Transmit seems to finish doing its job.
    I've searched other topics, but can't find out why I'm only publishing one page with the dead links.
    Thanks for the help. Frisbie
    Site: www.gripandelectric.com
    Dual 1.8 G4   Mac OS X (10.4.8)  

    So this little bit of troublshooting for me...
    Open up your page in iWeb. Under the View menu, select "Show Layout". Now open the Inspector and click over to the Page tab. What is the number entered for "Header height"? Try increasing it little by little until you see the grey boundary line for the header section move down. You might also see some of your page content start moving down at this point. Then you will have your header height adjusted correctly. Try a republish if you like.
    Right now, it looks like the default iWeb navigation bar is probably hidden beneath the header image. This might be due to the header size being set too small.
    Oh and try something else for me.... Take the hyperlink off your Page Headline text "www.gripandelectric.com". It leads to the same page anyway if we can get your "Home" button working.

  • I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    How did you transfer it to the PC?
    Not good to export as a Word .doc/x, better to:
    Menu > Export > PDF
    Peter

  • Published site has more pages that local iWeb files

    I added several pages to my site. Then my hard drive crashed and my backup did not have the new pages. Now the published site has more pages than what i see when I open iWeb. How can I fix this? I want all the published pages also available in my hard drive.

    You will have to recreate the new pages, unless you can use a file recovery service to ressurect the domain file that was on the crashed hard drive.
    You can copy and paste images and text from the published website (view it in your browser) into new iWeb pages, but there is not a way to import html files back into iWeb.

  • Custom publishing page layouts have undesirable overlapping effect in edit mode

    I am very new to SharePoint branding.
    I've created several custom page layouts using SPD.  They are used in publishing site collections with basic web part zones in various <div>'s for layout purposes.  The issue I've run into is that while in display mode the pages work fine,
    but in edit mode there is an undesirable overlap that causes the web part editing panel to become obscured or unusable. 
    I have ran across a few search hits that seem to dance around this topic, but nothing I've found thus far has truly addressed my issue.  Am I editing the CSS, master page, page layout or something else to ensure the edit mode is functional?
    Thank you all for your time and expertise.

    I have solved my own problem, but felt it might be necessary to document it here for those just starting out.  For a page layout to display properly, at least for me, I had to invoke the corev15.css classes in my <div> tags to convert to table
    elements when switching to Edit mode.   While this is ultimately not my first choice, I was able to add some custom styles in this CSS file to style my div's in a more suitable fashion. 
    On a publishing page, you may have code inside your <asp:Content> tag like:
    <div class="welcome welcome-splash">
    <PublishingWebControls:EditModePanel runat="server" CssClass="edit-mode-panel title-edit">
    <SharePointWebControls:TextField runat="server" FieldName="Title"/>
    </PublishingWebControls:EditModePanel>
    </div>
    From here, I had begun to style my <div>'s with inline CSS but it will break in Edit mode. Here's where I realized you needed to keep consistent with the corev15.css. Here's what should follow: 
    <div class="ms-table ms-fullWidth">
    <div class="tableCol-75">
    <div class="cell-margin">
    <WebPartPages:WebPartZone id="g_E35F979436254554ABCD54B2AD28A4BF" runat="server" title="Header"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
    </div>
    <div class="ms-table ms-fullWidth">
    <div class="cell-margin tableCol-50">
    <WebPartPages:WebPartZone id="g_A61037130DF64BF09145576D6DB1C679" runat="server" title="Middle Left"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
    </div>
    <div class="cell-margin tableCol-50">
    <WebPartPages:WebPartZone id="g_F8C0B2FDD77749B3B9274445692F056B" runat="server" title="Middle Right"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
    </div>
    </div>
    <div class="cell-margin">
    <WebPartPages:WebPartZone id="g_7BBC1C180FD84BF08E9E96ED9C5D2B33" runat="server" title="Bottom"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
    </div>
    </div>
    <div class="cell-margin tableCol-25">
    <WebPartPages:WebPartZone id="g_A32DD6684EF447559FF3D6A1539735D4" runat="server" title="Right"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
    </div>
    The above code makes a typical 75:25 2-column page with two additional spaces in the left side for extra web parts. I hope by posting this example I can help other young budding SharePoint branding people to get their feet wet. Thank you all for viewing my
    issue and I think this can be marked as closed now.

  • Error: This page has graphics other than images or text on it

    I recently upgraded to Adobe Acrobat 9 Pro, and I am experiencing a problem
    with OCR text recognition.
    If I use "Create PDF from Scanner" or "Create PDF from file" (using a
    monochrome TIFF image) to create a PDF, I can then perform OCR on the PDF
    file in Acrobat.
    But if I open a monochrome TIFF image in some other program (Irfanview) and
    print that to the Adobe PDF printer, then open that PDF in Acrobat and try
    to perform OCR on it, I get the following message:
    "Acrobat could not perform recognition (OCR) on this page because: This page
    has graphics other than images or text on it. It cannot be captured."
    If I select the scanned image in the PDF file using the TouchUp Object tool,
    and then cut it to the clipboard, I am then able to then select a second
    blank object on the page, that has the same dimensions as the scan (it is
    full page size). If I delete that object, then paste the first one back in
    (the scanned image), then OCR will work. So what is this additional object
    that is preventing OCR? I did not have this issue with versions 4-8 of
    Acrobat.
    Also, this problem appears to only pertain to 1-bit monochrome images. I
    scanned the same page to 8-bit grayscale, then printed that to Adobe PDF
    from Irfanview, and that PDF file allows OCR to be performed. Does anyone
    else have a problem using OCR when the PDF was created by printing a
    monochrome raster image to PDF?

    Not sure this will work for indesign, but for any other searches about the OCR problem with "This page has graphics other than images or text on it", I used this workaround for a huge scanned text that Acrobat 9 Pro wouldn't OCR:
    1. Save As.... > TIFF image
    This saved each page as a tiff, so if your file is big, you might want to create a special folder for it. (I had 1100 pages!)
    2. Open the folder with the TIFF images.
    3. Select all files.
    4. Right-click > Open with.... > Choose.... > Other.... > Acrobat
    5. Popup will ask if you want to open all files in a single document. Obviously a good choice for 1100 pages.
    6. After the new PDF generates, save it.
    7. Document > OCR --- should work now.
    8. If it does, don't forget to delete the folders with the TIFFs.
    Hope that helps someone.

  • E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
    LN

  • Rich Text Editor functionality for a DIV tag in a publishing page in SharePoint online

    Hi,
    We are having a requirement where we need RTE behavior of SharePoint 2013 Rich Html Field for a custom DIV. The scenario goes like this:
    1. I have a publishing page
    2. I dropped the content editor web part and to that content editor web part I will point to an HTML file that needs to be rendered in that content editor web part
    3. I have one DIV in the above mentioned HTML files and I want that div to be editable and I need to RTE options for that DIV.
    How to accomplish the above behavior?

    Hi,
    According to your post, my understanding is that you wanted to create html rich text editor for a DIV tag in a publishing page in SharePoint online.
    You can create your own Rich Text Editor.
    Here are some great blogs for your reference:
    An Example to Use HTML Rich Text Editor
    Example: Using the Editor's instance
    Rich Text Editor control in SharePoint 2010
    Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
    Office 365 forum
    http://community.office365.com/en-us/forums/default.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • "your page has now bin published - but it's still the old page on my webpage - what can I do (and yes; I have published this page now over 30 times without success)

    "your page has now bin published" - but it's still the old page on the internet - what can I do (and yes; I have published this page now over 30 times without success. It worked well enough with two other pages, but not with this one)

    I fixed it - just empty cache in the browser

  • Published page different than edited draft

    OK, this one is very interesting! I've edited the page, it
    looks great in draft form. I publish it and suddenly one of the
    edited parts has a different type style and even an extra word that
    does NOT exist in the edited draft!! How is this
    possible????

    What is the web address of the published site so we can see what you are referring to?
    While waiting for that:
    A common reason why formatting on a published page will not match what you see in iWeb is that objects (pictures, movies, text boxes, etc.) are overlapping. When the web browser goes to try and interpret that overlap the results can vary (this can effect the display of fonts as well).
    Go to the page in question in iWeb and click on 1 object. Go to Edit > Select All.
    You will see all the objects on the page with their boundaries activated. Move any items that are overlapping so they have their own space around them.

  • Looking for a way to move entire pages from one photo book into another photo book.

    I haven't found out how to move pages from one photo book into another. Surely this is possible?
    Also on the subject of photo books: it seems that it is not possible to enlarge the size of a text box. Or has anyone found a way to accomodate more than 1 line of text on a photo book page?

    You can look through some of the different Layouts available.
    Select your page.
    Click the "Layout" icon on the lower right hand of the application window.
    Above it will appear a "BACKGROUND" section and a "LAYOUT" section.
    Immediately below the "LAYOUT" is a drop down menu which will show you all the different options.

  • I can't send a photo by text - New user, Blackberry Torch 9800

    I recently started using the Blackberry Torch 9800 and I'm still getting the hang of things.
    This means I'm at the stage where i'm still accidentally muting myself while i leave a phone message or putting people on hold with my ear.  If anyone has a master solution for this, that's welcomed, but it's not my main question.
    I want to know how to send a photo by text.  I've tried, and it comes up with an x next to it, as it hasn't sent.
    i looked around the internet and found the suggestion that I resize my images using some app.  The app they suggested doesn't exist anymore so I downloaded "Fast Photo Editor Free" and resized my image.  It still didn't send.  I made it smaller than you'd ever want an image to be, and it still wouldn't send.
    To be clear, I can put the photo in the text, but once I push send, the text shows up with a red x next to it.
    I'm not really sure what to do. 

    Hello irishduck
    Welcome to the Community
    You may try contacting you Carrier as there might be settings that they can do on their end to let you send the MMS. You may also wanna check these pages to help you familiarize with your phone.
    Blackberry 101
    Blackberry Tips and Tricks
    Blackberry Battery Saving Tips
    Goodluck
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Publishing Pages all messed up on Internet - but correct on imac..

    1.  I have updated my web-site built with iweb.  Two pages are completely screwed up - but on my imac, they are perfect.  I have tried publishing using SEO for iweb and also using FETCH - both ftp publishing.  Any recommendations?  I keep trying to republish - but they are still completely wrong.  Everything on top of each other.
    2.  DOES anyone know why publishing would put all my ALBUMS (separate page of web-site) into a folder labeled (ABOUT US) - another seperate page.  I do not know how to get it out of the wrong folder - plus why it would do it.  It keeps giving me an error that it can't find the page when publishing......

    Opps. I missed the second page and didn't see that first paragraph.  Follow Roddy's suggestion.
    Most of the text on the right side of that page has been converted to an image and is a link  to http://www.apple.com/startpage/.
    You should check that text box and remove the hyperlink from it.

Maybe you are looking for

  • Tablespace issue in ASM

    Hi , Can any one plzz help me in here, I have a ASM instance and one the the database is usng storage management auto for the tablespace. i got the following error for one the insert statments. ORA-01536: space quota exceeded for tablespace 'NMC_INDE

  • CACHE feature in page regions ?

    1) Does everyone enable CACHE in Page definition screen ? 2) using CACHE improves the performance of application ? any instance where you want to turn OFF ? 3) Is there any full instance level setting(global setting) in Apex installation where we can

  • Mouse inverted when scrolling

    Hello, When I scroll up on the mouse the page goes down and vise versa. How do i make the mouse scroll down on the page when i scroll down on the mouse. I already looked in mouse settings and universal mouse settings and there is nothing on the subje

  • Routing - Field Selection

    Dear All, I would like to know is it possible to make the field PLPOD-INFNR as a required input field for the control key PP02 for a particular plant? I checked in OP5B & OP5D, but not quite sure how to link the 2, as plant is at header level & info-

  • Boolean values

    Does anyone know how Q&A handle boolean values?  If a dataset includes a column with true/false values, what is the correct syntax for a Q&A query that filters on this value. Carla Sabotta