Publisher 11.1.1.5 graph and pivot problem

Hi,
I use publisher 11.1.1.5. My graph (for RICAVO) show only integer values and pivot table (for QTA) get the error message. Only normal table generation is successful. I used layout template editor.
My example data is:
<DATA_DS>
<G_1>
<ID_PROD>53</ID_PROD>
<DESCR>Rac1</DESCR>
<QTA>1021755</QTA>
<RICAVO>4268165.45</RICAVO>
</G_1>
<G_1>
<ID_PROD>54</ID_PROD>
<DESCR>Rac2</DESCR>
<QTA>334344</QTA>
<RICAVO>1419017.22</RICAVO>
</G_1>
<G_1>
<ID_PROD>51</ID_PROD>
<DESCR>Rac3</DESCR>
<QTA>1137378</QTA>
<RICAVO>4689214.45</RICAVO>
</G_1>
<G_1>
<ID_PROD>56</ID_PROD>
<DESCR>Tel1</DESCR>
<QTA>614434</QTA>
<RICAVO>2264936</RICAVO>
</G_1>
<G_1>
<ID_PROD>9</ID_PROD>
<DESCR>Cert</DESCR>
<QTA>42006</QTA>
<RICAVO>178209</RICAVO>
</G_1>
<G_1>
<ID_PROD>57</ID_PROD>
<DESCR>Tel2</DESCR>
<QTA>403921</QTA>
<RICAVO>2000968</RICAVO>
</G_1>
<G_1>
<ID_PROD>46</ID_PROD>
<DESCR>Lett1</DESCR>
<QTA>239816</QTA>
<RICAVO>262993.03</RICAVO>
</G_1>
<G_1>
<ID_PROD>44</ID_PROD>
<DESCR>Lett2</DESCR>
<QTA>71952</QTA>
<RICAVO>76164.45</RICAVO>
</G_1>
<G_1>
<ID_PROD>58</ID_PROD>
<DESCR>Tel3</DESCR>
<QTA>57375</QTA>
<RICAVO>205802</RICAVO>
</G_1>
<G_1>
<ID_PROD>21</ID_PROD>
<DESCR>Po</DESCR>
<QTA>6785</QTA>
<RICAVO>536015.98</RICAVO>
</G_1>
<span id="skype_highlighting_settings" display="none" AutoExtractNumbers="1"/>
</DATA_DS>
the pivot preview (for QTA) in layout editor is:
53 54 51 56 9 57 46 44 58 21
rac1 NaN
rac2 334344
rac3 NaN
Tel1 614434
Cert 42006
Tel2 403921
Lett1 239816
Lett2 71952
Tel3 57375
Po 6785
there are two Nan values!!!
What kind of problem would be?
Edited by: 957438 on 6-set-2012 7.47
Edited by: 957438 on 6-set-2012 7.49

The problem seems to be scientific notation. Values that are higher than 1000000 are automaticalli conver.ted in scientific notation and they aren't recognized in graphs and pivot.
Indeed online analyzer show this values with the integer part only, i.e. 4,5E10 is showed as 4. How i can avoid automatic scientific notation?

Similar Messages

Update -Graph and Pivot Table model.DataControls.dcx of type null not found

Now Solved.
I upgraded to the new Jdeveloper release and the Preview works.
Update
I created a new application and the graphs work ok.
Now, why in my current project won't the graphs work???
Chuck
This just occured today 6/22/09.
When ever I preview a graph or pivot table i receive this message:
oracle.jbo.NoDefException: JBO-25002: Definition model.DataControls.dcx of type null not found
I drop the query on a form as a table and it works fine.
I have used Graphs before, and ahve never recieved this error.
I just remenbered, I was using the previous release of Jdeveloper when I built the graphs.
Probably nothing !!
In the developers manual this message is mentioned:
+29.3 Correcting Simple Oracle ADF Runtime Errors+
Failures of the Oracle ADF Model layer cannot be detected by the JDeveloper
compiler, in part because the page’s data-display and method-execution behavior
relies on the declarative Oracle ADF page definition files. The Oracle ADF Model layer
utilizes those declarative files at runtime to create the objects of the Oracle ADF
binding container.
To go beyond simple schema validation, you will want to routinely run and test your
web pages to ensure that none of the following conditions exists:
+■ The project dependency between the data model project and the user interface+
project is disabled.
By default, the dependency between projects is enabled whenever you create a
web page that accesses a data control in the data model project. However, if the
dependency is disabled and remains disabled when you attempt to run the
application, an internal servlet error will be generated at runtime:
oracle.jbo.NoDefException: JBO-25002: Definition
model.DataControls.dcx of type null not found
To correct the error, double-click the user interface project, and select the
Dependencies node in the dialog. Make sure that the ModelProjectName.jpr
option appears selected in the panel.
I checked and the model.jpr is there.
I re-installed jdeveloper but the same error occurs.
I have no idea on how to proceed.
Chuck
Edited by: user634580 on Jun 24, 2009 11:59 AM
Edited by: user634580 on Jun 24, 2009 12:02 PM
Edited by: user634580 on Jul 4, 2009 8:23 AM

Well, Shay
I search my entire C drive for datacontrol.dcx and *.dcx and no files found.
I am usiing ADF.
The new application that I created that works in preview does not have this file.
I unstalled jdeveloper, downloaded a new copy, deleted Oracle directory, installed jdeveloper and results are the same.
Is the datacontrol.dcx file the same as the "datacontrol in the Data Controls Folder "?
The datacontrol is present the Data Controls Folder (model.jpr model.appmodule)
There are 3 messages in the log pertaining to DVT listed below.
**WARNING: A duplicate definition for the feature "AdfDvtGraph" has been found at*** zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.52.05/DefaultDomain/servers/DefaultServer/tmp/_WL_user/NBCV3/1k9n8d/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Jun 26, 2009 7:53:29 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
WARNING: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.52.05/DefaultDomain/servers/DefaultServer/tmp/_WL_user/NBCV3/1k9n8d/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Jun 26, 2009 7:53:29 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
WARNING: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.52.05/DefaultDomain/servers/DefaultServer/tmp/_WL_user/NBCV3/1k9n8d/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
A

Graphs and Charts output in XML Publisher Report

Hi All,
I have incorporated the graphs and charts as well as some bitmap images in XML Report (RTF File), When i am taking a output in pdf. it is coming fine and working properly, where as while taking the same output in excel, graphs/charts/bitmap images are not getting displayed. Only you can view the data.
can you please suggest what's the issue on the same and how can be resolved.
Thanks & Regards
Ankur Dawra

Not sure you are on the right forum...

BI Publisher report ends with Warning Message for Pivot type reports..

Hi,
I had used BI reporting(xml publisher) to develop our all reports and registered in R12 and works fine for all the tabular/forms type reports but it fails with the warning message(colored in yellow) for Pivot type reports. The output comes in xml..
When I changed the pivot table type report to tabular it comes with pdf. No issues.I do not know how to solve this issue...
Please help me on this..
Thanks
Imran

Welcome to the forums !
Pl post details of OS, database and EBS versions, along with the complete error message.
HTH
Srini

How to show one prompt that works for both Graph and Table views?

Have an analysis with a graph and a table. The information in the table and graph are different so cannot use a pivot table w/graph.
Each view has a view prompt for Year and Month (tried both separately and also as one combined column ‘201001’) so user can easily change months.
Too much data to use the slider because it will not graph.
Page prompt does not allow user to switch dates easily.
Since this will be a link from a dashboard, do not think making this a dashboard from a dashboard would be good so not a dashboard prompt.
Saw something about Master Detail linking, but does not appear to work with graph prompts.
How would the analysis be configured to show one prompt that works for both the Table and the Graph?
One prompt would change both the table and the graph.

Master Detail Linking almost works.
Table view can show all the results without error.
Graph view needs to be limited or errs with "Exceeded configured maximum number of allowed input records."
Is there a way to set the initial Master Detail Linking value to the top sorted value?

Questions on graphs and charts.,,,

Hi ,
I have always been facing problem while working with graphs and charts. First of all let me be clear with the data these accept. further questions as under:
1. If I wire an array (1-dimention) to graph/chart , it plots it on Y axis. In this case, what are the values on x.axis?
2. If I want to acquire a voltage on Analog I/P channel for some specified time , say 2 sec., how to ensure that time span and data without missing anyone.
3. If I have to plot an I-V plot, how to make sure that V will come on Y-axis and I will come on X-axis.
Plz clear these doubts...
Regards
GNS

Hi,
1. Charts takes sigle point value like plotting DC voltages, Graph takes set of values like arrays (1D) which are plotted on Y-axis with respect to x axis which is integer number like 0,1,2..etc.. ,
XY graph takes bundled array of X-axis & Y axis.
2. Charts are used where a single point value is to be presented/updated w.r.t. to time or x scale (x scale can also act an index).
Also it supports update modes like sweep, scope & strip.
3. Graph are used to plot waveforms which does have no. of samples acquired from DAQ board or other source, which needs to be plot on Y-axis.
Main inputs of waveforms are starting time (t0), time stpes(dt) & Y elements.
4.X-Y graphs are used where you want to plot Y elements w.r.t. to the defined X eleme
nts. For e.g. I want to plot as
Y=10 when X = 0
Y=20 when X = 2
Y=30 when X = 3
etc.
Here we have one array of Y elements & other array of X elements. So bundle your X & Y array & fetch to XY graph to plot it.
Hope it clears you the concepts. Your feedbacks are welcome.
Best Regards,
Nirmal Sharma
India

Three Graphs and Data need to display in a single screen

Hi Gurus,
I have a requirment that customer wants to see three graphs and data in a single screen.
The data will be avilable in a single query, how can i display. I gone through with many SDN blogs, but i did not get the solution.
Requirment is:
First graph Business Unit informaiton, there are around 7 BUs, under each BU, they have 3-7 Industry groups.
Second Graph: Industry Group, under each industry group there are no of customers, i want to display top ten customers.
Third Graph: Top Ten Customers.

Hi Karanam,
Assuming you are using WAD;
First graph Business Unit information, there are around 7 BUs, under each BU, they have 3-7 Industry groups.
-You would need to have a Query that displays the BUs with their Industry Group count i.e BU in the Rows with Industry Count as the KF - I assume you want to show count here
-Build a Data Provider DP1 on the Query
-Drag a Chart webitem onto the web template & assign DP1 to it - use a Column/Bar Chart to display the Category 'BU' & Series 'Industry Count'
Second Graph: Industry Group, under each industry group there are no of customers, i want to display top ten customers.
-You need to have a Query that displays the Industry Groups & top 10 Customers within each i.e. - create a Query Condition to achieve top 10 Customers based on some criteria - I assume Sales Revenue or likewise
-Build a Data Provider DP2 on the Query
-Drag a Chart webitem onto the web template & assign DP2 to it - use a Column/Bar Chart to display the Categories 'Industry Group', 'Customer' & Series 'Sales Revenue' or likewise
Third Graph: Top Ten Customers.
-You need to have a Query that displays the top 10 Customers i.e. - create a Query Condition to achieve top 10 Customers based on some criteria - I assume Sales Revenue or likewise
-Build a Data Provider DP3 on the Query
-Drag a Chart webitem onto the web template & assign DP3 to it - use a Column/Bar Chart to display the Category 'Customer' & Series 'Sales Revenue' or likewise
--Priya
Edited by: Priya Jacob on May 27, 2010 7:41 AM

An error occurred while publishing file "/Web/Sites/iWeb/Jim and Steph's Si

I'm guessing this is a common message most see when they try to publish their website. Reason I say this, is it is the only message I have recieved in the last week when trying to use this faulty software.
Here it is again if you missed it:
An error occurred while publishing file “/Web/Sites/iWeb/Jim and Steph's Site/Jim's Blog”.
I got this MacBook week ago yesterday. Totally excited to share pictures and blog information. Spent 99 dollars or close to it for a mac account to simply share this information on the web. The first four pages (all pictures), I published worked well. Then I updated to iWeb 1.1.1 and tried to publish with blogs and more pictures and it won't work. Now all that I published before does not even come up. I emailed support here on mac.com and got the generic reply that I have already read on this forum. I tired as many fixes as I could to no avail. Two questions:
1. Any ideas to fix this problem?
2. Can you get your money back?
Sorry this was so long.
Thanks everyone,
Jim B

Jim...
Try doing a "Publish All to .Mac" if nothing else works for you. And if I could make a recommendation, it probably wouldn't be a bad thing to simplify your site name (Jim and Steph's Site) and eliminate the apostrophes (also in Jim's Blog). A longer site URL with complexities such as punctuation and spaces and even capitalization can potentially wreak havoc on your site navigation and function. Simplifying your site and page names will at the very least lead to shorter and more recognizable URLs...and when you start to add more pages it will also make the navigation menu at the top of your pages look "cleaner". Think simple names, like "oursite" and "HeSays" or "SheSays"
Just a suggestion.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

How to save data on a graph and then add new data to it

i am currently plotting data on a graph from a physical system. However when i want to add new data to the plot, the old one is replaced. I am trying to do more than one plot on the same graph, where the incoming data is at different times. I want something like Excel where i can just add a new plot to the graph.Can i save the data or freeze it onto the graph or something so that i can add a new plot and see the two at the same time?

> i am currently plotting data on a graph from a physical system.
> However when i want to add new data to the plot, the old one is
> replaced. I am trying to do more than one plot on the same graph,
> where the incoming data is at different times. I want something like
> Excel where i can just add a new plot to the graph.Can i save the data
> or freeze it onto the graph or something so that i can add a new plot
> and see the two at the same time?
As the other post pointed out, there are two objects in LV for plotting,
graphs and charts. If you wish to have a chart recorder that
accumulates data into one or more plot with time, you probably want a chart.
If you push a button and acquire a trace and want to add that to your
graph, you just need to
combine it with the data you plotted before and
update the graph. It isn't the most efficient, but you can easily read
the value of the graph using a local, add another row or column or
element to your data and send it to the graph.
To directly answer your other question, no, the grah doesn't have a
functional interface for clearing, adding, or deleting plots. Instead,
you do that with the diagram nodes and give the graph the results.
Greg McKaskle

Graphs and parent-child with loops and duplicates

There is a parent-child relation in the table t(prnt, chld) which allows duplicates (A->B, A->B) and opposite paths (A->B, B->A), and complicated loops. Is there a way to identify rows that form any separate "connections network" and assign a "name" to them of any kind (letter, number, wahtever)? I try to use WITH recursive clause to identify and group rows belonging to one graph but with no luck. Any help would be appreciated.
thank you

Frank, I posted inputs for all graphs (multiple inserts) and some allowable outputs for one graph. For all cases (ie. graphs) the rule is the same:
1. identify all nodes belonging to a graph
2. "name" that graph (min, max or whatever you like)
3. print the output in the form (node_belonging_to_a_graph, name_of_the_graph) for all identified graphs
And as you said, I am somewhat flexible. I don't want to constrain the problem with saying min, max because it's not important how you name it, but the way which is somehow natural and fits with requirements is the usage of nodes' values.
You ask me if (1,1),(2,1),(3,1) is also OK as an output for sample graph (1,2)+(2,3). Yes it is. It is one of those I posted but with additional node which is chosen as a name for a graph. But as you can guess it doesn't matter which node you choose, and the additional information about a node named with its own name is not as important and the information that all other nodes are named with that name but it is 100% acceptable. If you changed the naming convention and started to use letters instead of node values then yes, it would be a must to have the output in the form (1,a),(2,a),(3,a).
You also ask me about the result for 90x data inserted as 5 rows: (901,902)..(906,904) and present sample result:
901 902
905 902
906 902
And the answer is no, it is not good result. It misses the information about the nodes 904 and 903 which belong to this graph too. The correct result could be:
901 902
905 902
906 902
903 902
904 902
or any other "combination" which presents 5 nodes with the name of the sixth (in this case of 6-node graph). Just one have to be picked, it doesn't matter which one. The "vertical" order is also irrelevant.
As you can see there is a lot of room that gives acceptable result. I don't want to constraint it because it can influence performance which is important when dealing with graph structures in relational databases (RDBMS are not predestined to easily cope with that sort of information). It can also influence the chosen algorithm and I'd like to pick the fastest one which gives acceptable result.
Two numbers x and y are in the same group (graph) if (and only if) at least one of the following is true:
(1) they appear on the same row together (it doesn't matter which number is in which of the 2 columns), or
--(2) x appears on the same row with a third number, z, and z is in the same group as y--
(2) there are other edges (entries) in the table that form a "path" from x to y. And because the direction of the path is not important for the problem (ie. the parent-child table structure can be forgotten for a moment), the path means "there exists connection" between x and y aka "you can walk from x to y".
The output consists of 2 columns: id (which is unique in the result set) and grp (which identifies the group) *[correct]*
The id column will always be one of the numbers in the group *[correct]*
It doesn't matter what the grp column is, or even what data type, as long as it distinguishes between the different groups. *[correct, but as you noted using one, picked number from a graph is the prefferable way]*
If there are N distinct numbers in the group, I need N rows of output for that group, with id showing all those distinct numbers. *[correct, but if you choose your naming convention as naming a graph with the value of the node belonging to it you can ommit the node which is named for itself (but it doesn't hurt is such row appear in the result)]*
You ask me if the graph is directed. No it's not. Your example (x,y) and (y,x) is great, and it can be concluded from my first post when I say that "opposite paths" (A->B, B->A) exists. What matters is the connection between the nodes. The parent-child table somehow imposes that direction is important, but for this problem it is not.
One of the motivations for my post is to know what other people think without affecting their minds with my approach. I don't want to skew anybody's mind into my solution which works, but it's not effective. I don't mind showing it but I kindly ask you to think about the problem before I post it. Diversity of approaches helps to distill the best one.
As I said I did it with the usage of sys_connect_by_path. If it doesn't appear to you as possible usage then it is likely that I don't use it efficiently. Please understand, I will post it if you ask me one more time but if you can live for a while without my inefficient solution and suggest something with WITH clause I would appreciate it.
There is no exact result I expect. There are many results which are correct and acceptable. They all must follow the rules described at the beginning.
Thank you
Edited by: 943276 on Jun 28, 2012 1:32 AM

Creating graph and DFS in a graph

Hello all,
I have set of vertices in array and edges in linked list. Now i want to create a graph and do depth first search. Can anyone suggest me how to proceed.
situ

Explained in great detail here (even pseudo code):
http://en.wikipedia.org/wiki/Depth-first_search
If you have a specific Java question, please post back.
Good luck.

Printing graph and other text in the same page

Hi,
I am aware that for providing graphs in ABAP report we have a FM which is called via a pushbutton in the output screen generally.
Is there any way I can do away with the pushbutton and print the graph and other text in the same page at one go ? I think Smartforms will not allow graph printing.......any other method to achive this ?
The user wants to print the graph and other text in the same page.
Regards,
Sandip.

Hi ! no it is not related to smartforms
search for custom container on google you idea about custom container.
following code is for displaying alv on selection screen which is created using custom container
and docking container.
I hope you will get some idea about how to use custom container for your problem
DATA DECLARATIONS
DATA: CONT_DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
GRID TYPE REF TO CL_GUI_ALV_GRID,
CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
IT_FIELDCAT TYPE LVC_T_FCAT,
GS_LAYOUT TYPE LVC_S_LAYO.
*ITAB TYPE TABLE OF SBOOK.
*& SELECTION SCREEN PARAMETERS
*PARAMETERS:P_TEST TYPE I .
*& AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
IF EBELN[] IS NOT INITIAL.
CREATE OBJECT CONT_DOCKING
EXPORTING
REPID = SY-REPID
DYNNR = SY-DYNNR
SIDE = CONT_DOCKING->DOCK_AT_BOTTOM
EXTENSION = 100.
IF CUST_CONTAINER IS INITIAL.
*----Create the alv with docking container
PERFORM CREATE_AND_INIT_ALV .
ENDIF.
ENDIF.
*& Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
DATA WA_FIELDCAT TYPE LVC_S_FCAT.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-REPTEXT = 'Airline Code'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-REPTEXT = 'Flight Connection Number'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
*WA_FIELDCAT-FIELDNAME = 'WUNIT'.
*WA_FIELDCAT-REPTEXT = 'Weight Unit'.
*APPEND WA_FIELDCAT TO IT_FIELDCAT.
*LOOP AT IT_FIELDCAT INTO WA_FIELDCAT.
*IF WA_FIELDCAT-FIELDNAME EQ 'WUNIT'.
*WA_FIELDCAT-EDIT = 'X'.
*WA_FIELDCAT-DRDN_HNDL = '1'.
*WA_FIELDCAT-CHECKTABLE = '!'.
*MODIFY IT_FIELDCAT FROM WA_FIELDCAT.
*ENDIF.
*ENDLOOP.
ENDFORM. "build_fieldcat
*& Form CREATE_AND_INIT_ALV
FORM CREATE_AND_INIT_ALV .
CREATE OBJECT GRID
EXPORTING I_PARENT = CONT_DOCKING.
*--perform build field catalog for alv display
PERFORM BUILD_FIELDCAT .
*--fill the drop down list values
PERFORM fill_dropdown_table .
*----fill final output table
SELECT * FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE EBELN IN EBELN.
*UP TO 10 ROWS.
*---display alv
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT
IT_OUTTAB = ITAB[].
*---Set editable cells to ready for input initially
CALL METHOD GRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 1.
ENDFORM. "create_and_init_alv
*& Form set_drdn_table
FORM fill_dropdown_table.
DATA: LT_DROPDOWN TYPE LVC_T_DROP,
LS_DROPDOWN TYPE LVC_S_DROP.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'KG'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'G'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'B'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
LS_DROPDOWN-HANDLE = '1'.
LS_DROPDOWN-VALUE = 'T'.
APPEND LS_DROPDOWN TO LT_DROPDOWN.
CALL METHOD GRID->SET_DROP_DOWN_TABLE
EXPORTING
IT_DROP_DOWN = LT_DROPDOWN.
ENDFORM. "set_drdn_table

How do i create a line graph and scatterplots graph in numbers?

hi fellow mac users, i am taking a biology class and i have to create a graph, the only problem is i dont know where to begin. I would love your advice and ideas on how to do so.THE OTHER TYPES OF GRAPHS THAT I HAVE TO MAKE IS A LINE GRAPH SCATTER PLOT BAR GRAPH AND A PIE CHART. if yall could help me that would be great. (a list of steps will help me alot)

HI izzie,
As well as the link in Wayne's post, you can get the Numbers '09 User Guide through the Help menu in Numbers.
Besides Chapter 7, which deals with your current question, I would strongly suggest reading at least the first four chapters of the guide for a good grounding in the basics of using Numbers.
Regards,
Barry

Displaying Graph and Charts in Portal

Hi Guys,
I want to display the Graph and charts dynamically in percentage wise for example ,I need to get the data from the data base of student table on passing marks of each subject i want to display the graph or chart accoridng to his marks ,,,
I am not able to find any help from searhing in web ,,
Please let me know for any help ....
Thanks in advance
Thanks
ravi

you could use the omniportlet, this come embbeded on WenCenter suite.
with this you can select you database and assign a sql query for show as graphic.
regards.

Publisher 11.1.1.5 graph and pivot problem

Similar Messages

Maybe you are looking for