Publishing Error: Insufficient Memory

Hi All,
I am using Captivate 4 with around 60 slides, now when I publish my project I always come across the following error:
I have tried different settings, such as making sure that there is no "compression" happening when publishing my project (Edit >Preferences >SWF Quality), also I have done restarting my computer for many times, started from a scratch and recreate my project. But still I encounter the same error over and over again, thus I am not able to publish my project.
Could you share insights and or suggestions on this particular error.
Thanks,
-Miguel

OK, I got it to work. I made a mistake in the order of operations, I think.
If you should recieve this error, this is how to resolve the problem if your system meets the same or similar specs as mine:
1. Check your environment variables and look for the JAVA_TOOL_OPTIONS. (Environment variables can be found in Windows 7 by clicking Start > Right click on Computer > Click Properties > Click Advanced System Settings > Click the Environmental Variables button.
If the JAVA_TOOL_OPTIONS variable exists, delete it.
2. Go to Control Panel > Programs and Features and remove all instances of Java, or Java Runtime Environment software.
3. Download and install the latest version of Java from the developer's website.
4. Once you have verified that you have the latest version of the JRE installed, go back to the Environmental Variables.
5. Under the System Variables (NOT the user variables) click New.
6. In the box next to Variable Name, type JAVA_TOOL_OPTIONS
7. In the box next to Variable Value, type -Xmx256M
8. Click OK, then click OK, then click again to close all the windows that are open.
9. Close Captivate 5 (if it is open) and restart the application.
10. Publish your project.
It should work fine after that. If it does not work, try restarting Windows and then publishing again.

Similar Messages

Restore towards 6310i : error insufficient memory

Hi,
I just downloaded the latest PC Suite last week in order to make a backup of my 6310i. I made the backup op phone+card and got no errors at all.
Now I try to restore the backup to the same phone, and I get the error "insufficient memory".
So I cleaned out everything that is present on the phone: SMS, names, etc. it is completely empty now. Restore to the same phone, result: "error insufficient memory".
Help! How can I make a restore? Or is the software only meant to make backups?
Thx for any suggestions.

Your iPod has approximately 120 x 1000 x 1000 x 1000 bytes unformatted capacity.
This is equivalent to 111 x 1024 x1024 x 1024 bytes.
120Gb10 = 111Gb2
Both numbers are valid descriptions of the capacity of the device, marketing uses the larger number, the IT industry generally uses the smaller one
See this thread for one of many earlier discussions on the same topic.
If iTunes is telling you your iPod is full then it is. Take some stuff off if you want to put some other stuff on. If you have more than about 2% of "Other" then it probably needs a full restore to reclaim space lost to orphaned files.
tt2

Blazer 4.0 Browser Insufficient Memory Error

Hi
recently i download the wifi drivers for the Tungsten E2, and i was using the Blazer browser and for some reason every single time it gives me a Download Error "Insufficient Memory" when i try to go to a different web site. Also this browser is slower than the Web pro 3.5 i had on my Zire Z2 for some reason.
Post relates to: Tungsten E2

After the adjustments noted in my previous comment a soft reset fixed the problem.
Soft Reset
All devices
A soft reset is similar to restarting a desktop computer. It's the most useful trick in your toolbox for fixing a variety of issues.
Soft resets usually do not affect your personal data on your device, unless your battery is low. If see battery warnings, change or charge your batteries immediately even if there is an error message onscreen. Also, it's a good practice to perform a HotSync operation before any reset (assuming that synchronization is not the problem you are trying to fix).
Use an unfolded paper clip, or the reset tool at the tip of your stylus.
Gently press the RESET button inside the hole on the back panel of your device (where's the reset hole?).
All data on your device should be retained. If you do lose data after a soft reset, you may have a more serious issue with your hardware that requires a repair.
After a soft reset, a logo screen appears, followed shortly by a Preferences screen asking you to set time and date.
If a soft reset does not resolve your problem, you may need to try one of the other resets below.

Insufficient Memory

Hey! Our Editor is getting this error:
"Insufficient Memory. Specify a smaller recording range, quit any unused application and install more system RAM."
.. when trying to use the Voice Over Tool. She has a 2.5ghz G5 PowerMac, 4GB DDR SDRAM. We're running FCP 5.1.2 and OS 10.4.8. What could be causing this? We're also getting an 'out of memory' error every once in a while, but we figure it's cuz she has too many projects open at once.
Any suggestions?
Fraser

Thanks for the responce. It got us thinking s'more. Answers...
1) No. It happenes various times during the day, and the project and program are usually loaded first thing and they use the VO during the day.
2) We have three 1.5 Terra drives and we have like 40 gig avail. on the computers HD
3) Activity mon. is usually around 60% or so, then when she uses it, obviously it jumps to 100%
4) the only things that are open, are links to our Editshare, and a public server for looking at DPRs/transcriptions, etc.
Is there a way to check if all the RAM is being used? Or if it's skipping over a RAM stick? We're thinking that maybe its not registering the other RAM even tho the 'about this mac' says it has 4.0 gigs. Any other suggestions?

BODI - Job Error " blank message,possibly due to insufficient memory

Ending up with below error while executing a DI job. The job uses a file of size 37 MB as source. As the error looks something related to memory. I have tried splitting up the input file into and executed the job. The job completed successfully without any error.
Could someone help me out to find any memory setting which needs to be investigated in the dataflow level to get a permanent solution for it.
Expecting for help !!!
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050406: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF|Dataflow SM_DM_ACCESS_LOG_DTL_F_DF
Data flow <SM_DM_ACCESS_LOG_DTL_F_DF> received a bad system message. Message text from the child process is <blank message, possibly due to insufficient memory>. The process executing data flow <SM_DM_ACCESS_LOG_DTL_F_DF> has died abnormally. For NT,
please check errorlog.txt. For HPUX, please check stack_trace.txt. Please notify Customer Support.
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050409: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF
The job process could not communicate with the data flow <SM_DM_ACCESS_LOG_DTL_F_DF> process. For details, see previously
logged error <50406>.
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050409: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF
The job process could not communicate with the data flow <SM_DM_ACCESS_LOG_DTL_F_DF> process. For details, see previously
logged error <50406>.

Hi,
loading a 37MB file shouldnt be a problem without splitting it. i´ve loaded GB size flatfiles without problems.
Did you checked the error.txt as stated in the message? Whats in there.
If you split the file and you can load it, you have enough space in your DB.
Please check the memory utilization of your server during executing the job with one file. Maybe the Server is too busy...what would be strange with a 37MB file.
Regards
-Seb.

Why am I getting an insufficient memory error in Illustrator?

I am getting an insufficient memory message on my illustrator program when I try to work on a particular document.
I remember long ago when I used to install my programs on my Mac there were memory settings for the graphics programs.
Does the pc work the same way? I am really at a loss as to why this error is coming up. In 5 years of working in Illustrator on the pc here, I have not gotten this message before now.
Now I get a new laptop and suddenly I get these errors. I am using Adobe Illustrator CS4 14.0.0 on a new Dell Inspiron 6400 running Windows XP with the latest service pack and patches.
Is there a memory setting in the application I should be looking at?
Steve

you didn't mention about the job size do u working on small scale and about how much ram you are using currently, mostly these type of errors occurs when you are mutitasking and working on big file sizes in illustrator

Insufficient memory error while installing JRE 1.2.2

At the moment I am having some problems installing JRE 1.2.2 on a HP proliant DL380 G3 machine (with two XEON 2.8Gb processors) with windows 2000 SP 3 installed. The error is �Insufficient memory available to run setup. Close any programs�.. bla bla. Error 111�. While the machine has 4Gb of memory installed and only 200mb is in use.
I have tried 1.2.2.011 (Pentium 4 bug solved) and 1.2.2.014, both with the same result. Unfortunaly I need the 1.2.2 and can�t �switch� to version 1.3 or 1.4.
PS I also experienced almost the same problem while installing Oracle 8.1.7 on the same machine. And solved this by renaming symcjit.dll to symcjit.old and use the next installation options : JRE_MEMORY_OPTIONS=-nojit -ms64m -mx128m
Has anyone seen this problem and solved it or is there any way to give some additional options to the JRE installer?
Thanks in advance,
Frank Zomerdijk

I found a bug report at: http://developer.java.sun.com/developer/bugParade/bugs/4643265.html
And there by the "work a round";
In order to install j2ee onto your server (with 4Gb or more) you might use one of those:
1) Pull some DIMMs out of your server till the memory is less
than 4g. Install j2ee and than put the DIMMs back.
2) Install j2ee on the other machine and than just copy
installed directories over to your server.
I will test the second option tomorrow.
Frank

Claris CAD saving issue, re-save gives insufficient memory error

I've been running Claris CAD for many years using OS8.5 but my old machine has finally died.
I've got a newer machine running 9.2 and the package works with the exception of saving. The initial save is ok but when I go to re-save / over write I get an error message telling me there is insufficient memory.
Thanks

Claris CAD is a little old, and was invented before larger disks became available. I find it is telling me that the drive on which I am trying to save is essentially full. To Claris CAD, anything over 2 GB (or maybe its actually 4 GB) seems to be full, regardless of its actual fullness, because it is not looking at the size correctly -- it is ignoring the high-order bits.
The solution is to give it a place to save that is small enough to be seen as not full. This can be a floppy drive or Zip drive on an older Mac or an external drive or memory stick partitioned to be smaller. Then use the Finder to move the file to its permanent location.

My iPhone won't sync, incorrect insufficient memory error

I have an iphone 4 32GB, running iOS 6.1. I'm running iTunes 11.0.1 on my Macbook Pro. I have a meagre 2.3GB free on my phone.
In the last few days I have noticed that my iphone isn't always recognised: when I connect via USB I get the new phone set up screen - from time to time, but not always. I became extra diligent about ejecting my iPhone from iTunes each time I unplugged it (I choose not to sync over Wi-Fi). That seemed to sort that problem out.
Today I'm unable to sync at all. When I try, I get a message that my iPhone cannot be synced because there is insufficient memory; that I need an additional 18.3 GB to sync my library.
I've restarted (phone and computer) and have even restored from backup. I'm holding off doing a factory reset, my next step will be to remove and readd files to try and spot the problem.
I think the problem is linked with podcasts: I have about a dozen that update weekly, and I have been keeping back copies on my phone. All up my podcasts take up about 6GB. I have nothing concrete to support my suspicion, other than that it seems that podcasts have been basically difficult to manage since updating to iOS 6.0.
Any ideas?

Okay, I've deleted my backlog of podcasts, which freed up more than the 6GB I thought they were taking up.
I still had the same sync problem though. I found an old reply to a similar issue on the forums, and the suggestion was to back up, delete all music, then reload it. I'm in the process of doing that now - I've deleted the music, and am syncing to get it back on. I'm currently at song 2667 of 3560, reporting 9.64GB free. If I get to the end of this and get the same error message, I'm going to be mad!!!
What has become clear to me is that users have had this issue over several years now, and there's no formal Apple response, and (because it's still happening) no sign of a fix.
It seems that the problem is that sometimes, when syncing, iTunes thinks it will be adding your iTunes library to your phone, in addition to the files already on your phone (i.e. it doesn't account for overwriting or skipping tracks already present).
I'll keep people posted with my progress, and hopefully one day this will be useful to someone else in my situation.

"Insufficient Memory" error message

I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
I have never encountered this memory issue at my home with below #2 Mac spec.
#1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does?
Do you have any solution to fix the “insufficient Memory” issue in #1 PC spec?
I had already reset the AI preference as the following link but it doesn’t work.
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-630ca .html
Our IT told me “He won't check whether there is any system or hardware problem (in PC #1 spec) because it will spend his much time in doing so.”
#1 PC spec (at work)
Brand: PC desktop
Processor: Intel [email protected]
Memory: 16GB
OS: Window 7
#2 Mac spec (at home)
Brand: iMac 27”
Processor: Intel i7 Quad core @2.93GHz 1333MHZ
Memory : 12GB
OS: Mac 10.6 Snow Leopard

Illustrator versions before CS6 use 32 bit processing
http://stackoverflow.com/questions/639540/how-much-memory-can-a-32-bit-process-access-on-a -64-bit-operating-system

Office for mac - Word error message "insufficient memory"??

I'm not sure if I'm in the right help section, so apologies of not and point me in the right direction?
My problem: I copied about 2 pages of text in a Microsoft Word (for mac) document, opened a blank document, and attempted to paste the text there. The text transferred, but when I attempted to save the document Microsoft closed, without saving, and offered to send an error report.
Alternately, I copied the text, closed Word, re-opened it to a blank document, and again attempted pasting the text. This time, an error message pops up that says "Insufficient memory. Save document now." after which it will let me save the document, but won't let me paste anything. So confused.
Thanks for any help!
(I also emptied my trash, just to free up some space and see if that helped, but even though its been ages since I've done it it didn't seem to make a difference.)

stassy wrote:
How exactly do you specifically update Office? I ran software update, but nothing for Office came up.
Choose "Check for updates" in the an Office program's Help menu.
Just to check if it worked, I opened the original document and selected Save As, and it allowed me to save it under a different name and re-open the doc, and then edit and save it - so I can go ahead with my work, but it would still be good to resolve the issue.
Hopefully just updating will take care of it. Just remember than an "insufficient memory" error never means insufficient memory. It means the program is buggy. While very powerful, Office is somewhat on the buggy side. It is updated pretty frequently however.
If you continue to have problems, there may be some specific issue that is causing your problem and can be fixed. The best place to investigate that would probably be Microsoft's own support forums.

Insufficient memory and "unknown error 961"

Periodically, I receive an insufficient memory error when I try to update an app. It happens about every other time and eventually fixes itself -- that is, does download the update.
Today I received an additional error "unknown error occurred during download '961.'"
I've removed all pictures and downloaded files. I've cleared the cache.
Both the device (internal) and SD storage have numerous gigs of free space.
The device also runs very slowly.
Any suggestions? Any advice is appreciated.
Thanks!

Method 1: Clearing the cache and data
1) To do this, go into your phone’s settings, then Applications (or Apps or Application Manager), swipe to the left to ”All” and scroll down until you find Google Play, tap on it.
2) In the app information page, tap on the button to empty the cache.
3) If this doesn’t solve the problem, try to delete the data from the Play Store
Please See More methods about Error 961here at appslova.com.
Android Fix: Unknown Install Error 961

There is a sign screen error, probably due to insufficient memory.

When I open a pdf (MacOSX 10.8.5) I get this message 'There is a sign screen error, probably due to insufficient memory.' (translation out of Dutch).
Via Photoshop I can open the file, that's the strange thing about it.
Someone an idea what the problem is and ofcourse what the solution is.

The Acrobat forum is here:
http://forums.adobe.com/community/acrobat
and the Reader one, here:
http://forums.adobe.com/community/adobe_reader_forums
This one is only for discussions on the forums themselves.

Insufficient memory error when loading a large Excel 2007 file

My Tx shows approximately 110 M free memory. I have the Documents To Go version 11 applications, as well as the 1.9 M spreadsheet on a 2Gb SD card. when I try to load the file, I get an insufficient memory error, and the device does a soft reset when I touch OK. I haven't tried moving the file to the device memory. Would that help? Is there anything else I can do to get the file to load?
Any suggestions would be appreciated
Post relates to: Palm TX

It means not enough dynamic memory, or the "RAM" portion of the memory. You have 110 MB of free program memory, which is where everything is stored, and is largely unrelated.
You could try buying UDMH, (palmpowerups.com) an app that expands the dynamic memory area.
A soft reset before opening the file may help too.
webosnation.com is another option for help.

Insufficient memory error at Easy Photo-Print EX

When I try to print DVD with PIXMA5000(?), suddenly insufficient memory error has happened with Easy Photo-Print EX. When this error happened before, I restarted my PC(Win 8) and then it was recovered. But now this error happened again. Then I restarted twice. However this error has still happened. How to solve this problem. Shoud I reinstall software again? I checked task manager and check other program. But only this program was working. So memory is very very enough. I don't understand this error. Please let me know how to do.

Hello mackon29 ,
We'll be happy to help! There could be a few different printers you are referring to, and just to ensure the most accurate information is provided, we’ll need to know the specific model of the printer you are using. Please look on the printer itself for the model name (ex. "PIXMA MG" or "PIXMA IP" followed by the numbers that follow. Once we have this information, we can further assist. Thanks so much, we look forward to hearing back from you!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Publishing Error: Insufficient Memory

Similar Messages

Maybe you are looking for