Problem to insert records in the Infocube

Hi Developer,
When I effectue the upload in the InfoCube (infosource: 2lis_02_scl) the records are trasmitted but not written on it. The same "update rule" in development system works right.
Have someone any ideas of the problem?
Thanks in advance!
Domenico

Hi Domenico,
look at the monitor (detail tab) of your data load where your records are deleted !
If there is something in your update rules (every record is deleted here) and your update rules are the same than in your DEV environment...check in PSA if your records coming from R/3 have something different (e.g. processkey not filled !)
Let me know...
Bye,
Roberto

Similar Messages

Inserting records in the table

Hi All,
I am working on a report where we are inserting huge numbers of records from an internal table to the ztable, I have been advised that rather than inserting all the records at one time we should divide the recods into small blocks may be let's say 100,000 of each block and try inserting the blocks in the ztable. So I was just wondering if anyone of you can help me with this how can I get this?
my internal table is it_data_table and my ztable is z_data_table.
Thanks,
Rajeev

Hi,
Rather than inserting records from the workarea it is better if you use the inetrnal table for insertion. If youu have say 50025 records than it will hit the database that many times which definitely is a performance issue.If you have an internal table say 'it' and another internal table 'it_temp' with a similiar structure, you can try something like as follows
loop at it.
count = count + 1.
it_temp = it.
append it_temp.
if count = 10000.
insert ztable from table it_temp accepting duplicate keys. "to avoid a dump if there are duplicates count = 0.
refresh it_temp.
endif.
endloop.
if it_temp is not initial.
insert ztable from table it_temp accepting duplicate keys.
endif.
In the above code the loop will run the number of record times but, the insert statement will run only 50025/10000 times (i.e, 5 times). After the completion of the loop we need to add the remaining 25 records (because insert will work last inside the loop when 50000 records are reached), for that we will issue the insert statement after completion of the loop, after checking the it_temp table. So the total of 50025 records would be entered in a batch of 6 inserts rather than that many inserts if using just the workarea.
I hope this does help you in your issue.
Thanks and Regards,
Sachin.

How to find last inserted record in the table.

Version: Oracle 10g
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".
As i come to know that Rowid is not result perfect results. Please provide your inputs.

user13416294 wrote:
Version: Oracle 10gThat is not a version. That is a product name. A version is 10.1.0.2 or 10.2.0.4, etc.
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".Not possible as your data model does not cater for it. That simple.
If there is a need to determine some order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or more attributes are needed to represent that information. Thus your data model in this case is unable to meet your requirements.
If the requirements are valid, fix the data model. In other words - your question has nothing to do with Oracle and nothing to do with rowid, rowscn or other pseudo columns in Oracle. It is a pure data modeling issue. Nothing more.

Inserting records in the ABAP exit function (hashed table XTH_DATA)

Hi all,
I want to add records in the logic of an ABAP exit function. Due table XTH_DATA being a hashed table the normal insert or append is not possible.
My logic MUST move the data to a temporary table (ITAB) where the logic is executed (modifying KYF values and creating new records.
In order to quickly get to a result I have solved the problem in an awful way through hardcoding the structure of ITAB to be the same as XTH_DATA is in this specific case.
I would like to know if someone has an exmaple of a nice way to dynamically create an ITAB with the structure of XTH_DATA?
At the end it should be possible to do: XTH_DATA[] = itab[].
Greetings,
Martin

Hi Martin,
the only way I know is to solve this problem with sort of pointers, field symbols. Roughly spoken the idea is you lookup the structure of xth_data in table dd03l. you define an internal table of type any. you loop around your xth_data table and assign the value of each column of xth_table to your internal table. then you do your your adding. Hopefully then you can simply assign xth_data to your itab.
regards,
Jürgen

How to insert record inside the internal table in below code

Hi all,
My requirement is to find the sub-total and need to insert in between the internal table.
You can see the output ....where I want the sub-total F2 when 1 & 2 combindely , 3 , 4& 5 combindely .Please check it and let me know is it possible
when i am using modification it is not creating extra row inside the table instead it is modifying one row and putting the total there.
For ex: the origianl output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
D      3          1
E      4          1
C      5          1
We want to display all the total of f2 of 1-2 , 3 , 4-5
so expcected output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
     *              3 ->This is the sub-total of 1& 2 of f2
D      3          1
        *           1 ->this is the sub-total of 3
E      4          1
C      5          1
      *             2 -> this is the sub-total of 4 & 5
= space
But coming output is
A 1          1
B 1          1
*             3 -> it is modifying the F row and inserting the total .Total is comong correct but is shoule insert instead of modifying the record!!
*           1
E 4          1
*             2
Please help how to insert the row total at the end of the chage of field
Please find the below code ..Due to space problem i am attaching below
Sas

Here is the solution ....i Got the answer Thanks for your helping hands friends
REPORT YTEST_MODIFY.
DATA: BEGIN OF ITAB OCCURS 1,
TOT TYPE C,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF ITAB.
DATA: BEGIN OF JTAB OCCURS 1,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF JTAB.
START-OF-SELECTION.
ITAB-F1 = 'A'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'B'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'C'.
ITAB-F2 = 5.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'D'.
ITAB-F2 = 3.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'E'.
ITAB-F2 = 4.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'F'.
ITAB-F2 = 2.
ITAB-F3 = 1.
APPEND ITAB.
SORT ITAB BY F2.
LOOP AT ITAB.
    WRITE:/1 ITAB-F1 ,
          8 ITAB-F2 ,
          10 ITAB-F3 .
ENDLOOP.
LOOP AT ITAB.
    IF ITAB-F2 = 1 OR ITAB-F2 = 2.
      ITAB-TOT = 1.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 3.
      ITAB-TOT = 3.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 4 OR ITAB-F2 = 5.
      ITAB-TOT = 4.
      MODIFY ITAB.
    ENDIF.
ENDLOOP.
SKIP 2.
SORT ITAB BY TOT.
DATA : L_SUM(2) TYPE C,
         L_ROW(2) TYPE C.
LOOP AT ITAB.
    MOVE-CORRESPONDING ITAB TO JTAB.
    APPEND JTAB.
    L_SUM = L_SUM + ITAB-F3 .
    AT END OF TOT.
      CLEAR JTAB.
      JTAB-F3 = L_SUM .
      APPEND JTAB.
      CLEAR L_SUM.
    ENDAT.
ENDLOOP.
LOOP AT JTAB.
    WRITE:/1 JTAB-F1 ,
          8 JTAB-F2 ,
          10 JTAB-F3 .
ENDLOOP.
* DATA: a TYPE i , b .
* LOOP AT itab.
*    IF b = 0.
*      a = a + itab-f3.
*    ENDIF.
*    AT END OF tot.
*      MOVE space TO itab-f1.
*      MOVE space TO itab-f2.
*      MOVE a TO itab-f3.
*      MODIFY itab .
*      CLEAR a.
*      b = 1.
*    ENDAT.
*    b = 0.
* ENDLOOP.
* LOOP AT itab.
*    MOVE-CORRESPONDING itab TO jtab.
*    APPEND jtab.
* ENDLOOP.
* ULINE.
* LOOP AT jtab.
*    WRITE: / jtab-f1 , jtab-f2 , jtab-f3.
* ENDLOOP.

Problem to insert id into the foreign key php/mysql

Hello all,
I'm having rouble to understand the process and there is no tutorial about my problem anywhere
I have two table:
Table 1 (member) with id, name, phone etc
Table2 (post) add_id, title, description, price, member_id
I got a form to post the add and I need to insert the id of table 1 into my table 2 member_id zone
Fisrt I did the recorset to get user id
$colname_rsMember = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsMember = $_SESSION['MM_Username'];
mysql_select_db($database_connect, $connect);
$query_rsMember = sprintf("SELECT * FROM member WHERE username='".$_SESSION['MM_Username']."'")or die(mysql_error());
$rsMember = mysql_query($query_rsMember, $connect) or die(mysql_error());
$row_rsMember = mysql_fetch_assoc($rsMember);
$totalRows_rsMember = mysql_num_rows($rsMember);
This part is working and I'm able to retreive info via echo just for testing
After this code I have my insert code
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form2")) {
$insertSQL = sprintf("INSERT INTO add (title, `description`, price, member_id) VALUES (%s, %s, %s, %s)",
                       GetSQLValueString($_POST['title'], "text"),
                       GetSQLValueString($_POST['description'], "text"),
                       GetSQLValueString($_POST['price'], "text"),
                       GetSQLValueString($_POST['member_id'], "int"));
mysql_select_db($database_connect, $connect);
$Result1 = mysql_query($insertSQL, $connect) or die(mysql_error());
$insertGoTo = "ok.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
Do I need to include hidden field in y form?
I'm having the same error message. Col member_id can't not be null
Any idea what I'm doing wrong?
Thank You!

When someone logs in, Dreamweaver creates a session variable called $_SESSION['MM_Username']. Use that session variable to create a recordset to get the user's ID, which can then be entered into the foreign key field of the child table.
Dreamweaver automatically puts the code for recordsets immediately above the DOCTYPE declaration, so you will need to move it above the code for the Insert Record server behavior. So, it needs to be in this order:
Recordset to get user ID
Insert Record for child table

Duplicate Records in the InfoCube how should i do to fix it?

Hi All,
we have different values between R/3 and BW, in the first control i find that in the cube i have duplicate records, how should i do to control and fix step by step this problem.
the Infocube receive data from 7 ODS.
let me know if you need further detail about our data model or load
thanks a lot for your help
Bilal

Hello All,
please i need further detail to don't make critical errors in the cube.
when i control data in my infocube right click ==> view data with this selection
0GL_ACCOUNT= R060501950
0PSTNG_DATE= from 01.01.2009 to 31.03.2009
i find duplicate records for all this info:
0GL_ACCOUNT, 0CO_DOC_NO, 0DOC_DATE, 0PSTNG_DATE, 0COORDER, 0FISCPER... and all the key figures.
to delete this duplicate records i have to make selections going: Manage ==> Contents tab ==> selective deletion (in the right corner beside) ... at this step what should i do?
i have start in background or i can select "Selective Deletion"
for this selective deletion which kind of info i have to put in reletion with my problem explained before
0GL_ACCOUNT= R060501950
0PSTNG_DATE= from 01.01.2009 to 31.03.2009
IF I PUT THIS INFO AND EXECUTE wich records the system will delete? all the records with this selections or only the DUPLICATE RECORDS?
Thanks a lot for your help
Bilal

How to insert records into the Table?

Dear Sir,
I'm new to JDeveloper. Now I managed to create a Frame in JDeveloper with many Text fields and a button. In the back end, I have a procedure to insert records to a table, to which I pass the values of the fields as parameters. Now I'm not getting the steps to call the PL/SQL Stored procedure when I click on the button. I'm using Oracle 9i JDeveloper version 9.0.3.1. and Oracle 9i Database.
Please give me the complete steps to achieve my task - it is quite urgent.
Thanking You in advance.
Regards,
Senthil .A. Perumal.

The JDBC tutorial will show you how to call a stored procedure from Java:
http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/basic.htm
One more thing, why are you using such an old version of JDeveloper? any reason not to upgrade to the 10.1.3 version of JDeveloper?
Also you might want to look into ADF and how it makes these type of database interactions easier.
See this demo:
http://www.oracle.com/technology/obe/obe1013jdev/adf_swing/master_detail_page_adfswing_bc.htm

Problem about inserting records ? ?

hello ,
i want to insert record in table abc which have 3 column
i want to insert 2 values from xyz table and one values is from variable
i write following query
vMYQUERY :='INSERT INTO abc(NO, TYPE, SUB_TRAN) SELECT '||vSR_NO||',TYPE,SUB_TRAN FROM xyz ;
EXECUTE IMMEDIATE vMYQUERY;
is it correct ?
pankaj

Did it work?
You could try the USING clause;
SQL> create table abc(NO number, TYPE varchar2(10), SUB_TRAN varchar2(10))
Table created.
SQL> create table xyz(NO number, TYPE varchar2(10), SUB_TRAN varchar2(10))
Table created.
SQL> insert into xyz values(0,' col1', 'col2')
PL/SQL executed.
SQL> declare
   vmyquery varchar2(100);
   vsr_no number := 99;
begin
   vmyquery :='INSERT INTO abc(NO, TYPE, SUB_TRAN) SELECT :1,TYPE,SUB_TRAN FROM xyz' ;
   EXECUTE IMMEDIATE vmyquery USING vsr_no;
end;
PL/SQL procedure successfully completed.
SQL> select * from abc
        NO TYPE       SUB_TRAN
        99 col1      col2
1 row selected.

Need to maintain the order of records in the InfoCube vis-a-vis the Flatfil

Hey Guys,
I am loading a Flat File(*.csv) in BI7.0 into an InfoCube. The file has 255 records in a particular order. I want all of them to appear in the same order in the InfoCube. Is there some setting that can help me with this?
Many Thanks.

Hey Rajendra,
Example scenario is: Suppose the flatfile is in the following format:
A-10
B-20
C-30
D-40
The infocube would display
B-20
D-40
C-30
A-10
i want it in the same format as the FlatFile.

HP Photosmart error-photo tray problem, re-insert or lower the photo tray

The Photosmart 6525 error message:
Photo tray problem
re-ionsert or lower the photo tray
Mac OSX 10.9.4
ran out of paper and inserted more paper, but printer only printed a couple of pages, then stopped

Hi,
I request you to try the following:
1. Lift the output tray and extend the photo tray
2. Remove all photo paper from the photo tray
3. Slide the photo tray all the way into its slot, as far as it can go
4. Lower the output tray, and then press the OK button on the control panel
5. Press the Power button to turn off the product.
6. Unplug the power cord from the electrical outlet
7. Disconnect the power cord from the back of the product
8. Disconnect the USB cable from the back of the product
9. Wait 30 seconds, and then reconnect the power cord to the product
10. Plug the power cord back into the wall outlet. Do not use a surge protector, extension cord, or power strip. Connect the unit directly to a wall outlet and power it on.
11. Select the Paper Type and Paper Size under Copy menu as Automatic.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "
Kudos! Thumps Up" which is on the right
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Regards,
Ray

Problem with displaying records from the database in a table ui element

Hi,
Iam creating an application which retrieves data from an oracle database. Iam able to connect to the database and retrieve the data in a result set. Then I try to set these values in a context node as follows,
while (resultSet.next()) {
String name = result.getString(1);
String EmpId = result.getString(2);
IEmpNode node = wdContext.nodeEmp();
IEmpElement el = node.createEmpElement();
el.setName(name);
el.setEmpId(EmpId);
node.addElement(el);
where the context structure is emp(node)
---name(attribute)
---empId(attribute)
Then I have bound the node emp to a table ui element.If I try to deploy this it comes up with Internal Server error.
But if try this way, without creating a node, only with attributes name and empId,
wdContext.currentContextElement.setName(name);
wdContext.currentContextElement.setEmpId(EmpId);
and binding the attributes to inputfields in the view, Iam able to see the last record in the database table.
So where am I going wrong while using the table ui element?
Regards,
Rachel

Hi
Try this
//Create the node in outer of while loop and bind to Table UIElement
IEmpNode node = wdContext.nodeEmp();
while (resultSet.next()) {
String name = result.getString(1);
String EmpId = result.getString(2);
IEmpElement el = wdContext.createEmpElement();
el.setName(name);
el.setEmpId(EmpId);
node.addElement(el);
Kind Regards
Mukesh

Problem in inserting record in Siebel on demand's object thru web service

Hi All,
We are working on Siebel on Demand (software as a service) CRM. We are using web service to communicate. We have WSDL files and we generated the code using Axis framework that comes along with Eclipse.
We are able to login and logoff to the CRM through web service. Now we are trying to insert new object data into existing objects. We are currently trying with Lead object, but when we are trying to insert a record through web service the record gets inserted but the API throws following exception at the end:-
SEVERE: Exception:
org.xml.sax.SAXException: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize.
Since this is generated code by Axis, I think we need to do some fine tuning in it to handle this exception. If you are a web service expert or has worked on web service client code, your help is really appreciated. How could we handle this exception at our end?
If you have any alternative way, please feel free to suggest me. Your inputs would certainly be of great value to us!
Thanks
Yash

has anyone been able to insert the data using the insert tag in write back in obiee 11

Relate to Inserting Record in the Table

Dear Expert ,
Records are getting inserted in a table to a perticular limit...then it stops inserting..
when i delete all the records from that table...then again it starts inserting the new records. Again stops after a perticular limit...
and goes on....
why is it so..?
this command is ok or not
ALTER TABLE CCT_RM_DETAIL_HRI
STORAGE (NEXT_EXTENT 50M, MAX_EXTENTS 200M,MIN_EXTENTS 1,INITIAL_EXTENT 100M, PCT_INCREASE 50M);

I am not getting any error. And you've checked the logs too? Nothing there too?
So what is occuring? Please understand, this is not normal behaviour for a database. Something somewhere is going wrong. But you need to explain to us in detail what you are doing, what you expect to happen and what actually happens. Because we cannot guess and we are not telepathic.
Cheers, APC

Problem with deleting record from the report.

This is my first post here, just to let you know I just started playing with Apex.
Here we go:
I have a page with report where the link to the record I have changed with ULR to the javascript:
javascript:doDelete(#RECORD_ID#)
I have created javascript in the HTML Header of the page
<script>
function doDelete(id) {
if (confirm("Are you sure you want to delete selected record?"))
$x('P3_DEL_ID').value=id;
doSubmit('DELETE');
</script>
and finally created a process for the page On Submit - After Computations and Validations.
declare
var_id number := :p3_del_id;
begin
commit;
Delete from mytable where record_id = var_id;
commit;
end;
I don't get error messages but record is not deleted.
Thanks for help in advance.
Robert

Robert,
That's the problem. With that type selected, change the value in the textbox to just: DELETE
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Problem to insert records in the Infocube

Similar Messages

Maybe you are looking for