PUK Locked Error on iPhone3 used as an iPod

How do I get past the "PUK Locked" error for my old iPhone3 that my son was using as an iPod? This PUK error happened when I connected the phone to iTunes and it prompted me to update the software (which I unfortunately did). Please help!

Thanks, but this old iPhone isn't being used as an iPhone and not under any service. It is only being used as an iPod so I can't get a code from the carrier to unlock the PUK error.

Similar Messages

Group data locked error for MM01 using parallel processing

Hello gurus,
I am using Call txn method (MM01) Parallel Processing method ( around 9 threads ). The Materials are getting locked around 10 percent sometimes.
This is happening randomly ..one day i dont have any locking errors ..next day i have ...Any ideas why this could be..any prereq i need to check before executing the parallel processing..
Thank you in advance..
sasidhar p

Hi Sasidhar
I guess you are either extending the Sales Data or MRP Data. Just make sure that you are processing these transactions in a linear form for a single material. We can use parallel processing for different materials but for a single material if we go for parallel processing we can definetely expect the Lock Objects error.
Kind Regards
Eswar

Can a locked iPhone 4s be used as a iPod?

Hi,
My car has Lockpick which interfaces my iPhone 4 to the stereo. I like how it works.
I want to upgrade to an iPhone 5s but the new interface won't work with my car. Since my iPhone 4 memory is filled with songs (32g) I was thinking of getting a used iPhone 4s 64g and using it in my car exclusively. There's no reason to make calls anymore since I'll be using it mostly as a disk device.
Question... Can I buy a "locked" iPhone from eBay, which sell for less than working phones, and use it as a iPod touch? Plus bluetooth and wifi.
To clarify, I'd like to buy a locked phone, connect it to my Mac, download songs, then play them in my car (which uses a wired connector via the 30 pin interface).
I assume I might need to put my iPhone 4 32g (which is my current phone) sim into the locked iPhone 4s 64g I plan to buy used.
And again, the lockpick (tm) interface in my car won't work with the new iPhone 5s, I don't want to use it even if I could. I'd rather install a no functioning phone/computer permanently in my car.
Thank you for any advice you can offer.

Kevin11721 wrote:
So if I unserstand you correctly there are two types of locks. One from the carrier (which can be circumvented with another valid sim) and a device lock from apple (Bricked?) which can never be undone.
Actually there are other types of locks, but the only ones you'd need to worry about are the lock to the carrier and the Activation Lock.
Is there a visual indicator of the perminent lock on the screen?
No. There is no indicator of any type of the carrier lock. You won't know until you try to use another carrier's SIM. You'd find the Activation Lock if you tried to change the iCloud settings or erase or restore the iPhone. If Activation Lock is set, it would insist on the previous owner's Apple ID and password.
Regards.

Restore using TSPITR Results Dead lock error

This is the step is followed but i am getting deadlock error .please give your valuable suggestion .
Product Used:oracle 11g in linux environmnet
1)Before taking backup get SCN number for restore.
Command applied: Select current_scn from v$database;
2)running Full backup of database
Command applied:
configure controlfile autobackup on;
backup database;
CROSSCHECK BACKUP;
exit;
3)Running level 0 incremental backup
Command applied:
BACKUP AS COMPRESSED BACKUPSET INCREMENTAL LEVEL 0 TAG ='WEEKLY' TABLESPACE TEST;
exit;
3) Running level 1 incremental backup
Command applied:
BACKUP AS COMPRESSED BACKUPSET INCREMENTAL LEVEL 1 TAG ='DAILY' TABLESPACE TEST;
4)Before Restore(TSPITR) following procedure are applied under sysdba privilege
Command applied:
SQL 'exec dbms_backup_restore.manageauxinstance ('TSPITR',1)';
5)TSPITR Restore command
Command applied:
run
SQL 'ALTER TABLESPACE TEST OFFLINE'
RECOVER TABLESPACE TEST UNTIL SCN 1791053 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
SQL 'ALTER TABLESPACE TEST ONLINE';
and i tried with this option also(the same error i was getting)
Command applied:
run
SQL 'ALTER TABLESPACE TEST OFFLINE';
SET UNTIL SCN 1912813;
RESTORE TABLESPACE TEST ;
RECOVER TABLESPACE TEST UNTIL SCN 1912813 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
SQL 'ALTER TABLESPACE TEST ONLINE';
The follwing error i get for above mentioned restore command
Recovery Manager: Release 11.2.0.1.0 - Production on Tue Aug 17 18:11:18 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: NEW10 (DBID=2860680927)
RMAN> run
2> {
3> SQL 'ALTER TABLESPACE TEST OFFLINE';
4> RECOVER TABLESPACE TEST UNTIL SCN 1791053 AUXILIARY DESTINATION '/opt/oracle/base/flash_recovery_area';
5> SQL 'ALTER TABLESPACE TEST ONLINE';
6> }
7>
using target database control file instead of recovery catalog
sql statement: ALTER TABLESPACE TEST OFFLINE
Starting recover at 17-AUG-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=404 device type=DISK
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Creating automatic instance, with SID='BkAq'
initialization parameters used for automatic instance:
db_name=NEW10
db_unique_name=BkAq_tspitr_NEW10
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/opt/oracle/base/flash_recovery_area
log_archive_dest_1='location=/opt/oracle/base/flash_recovery_area'
#No auxiliary parameter file used
starting up automatic instance NEW10
Oracle instance started
Total System Global Area 292933632 bytes
Fixed Size 1336092 bytes
Variable Size 100666596 bytes
Database Buffers 184549376 bytes
Redo Buffers 6381568 bytes
Automatic instance created
Running TRANSPORT_SET_CHECK on recovery set tablespaces
TRANSPORT_SET_CHECK completed successfully
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 17-AUG-10
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=59 device type=DISK
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/autobackup/2010_08_17/o1_mf_s_727280767_66nmo8x7_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/autobackup/2010_08_17/o1_mf_s_727280767_66nmo8x7_.bkp tag=TAG20100817T142607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/opt/oracle/base/flash_recovery_area/NEW10/controlfile/o1_mf_66o0wsh8_.ctl
Finished restore at 17-AUG-10
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 8 to new;
set newname for clone datafile 3 to new;
set newname for clone datafile 2 to new;
set newname for clone datafile 9 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 7 to
"/opt/oracle/base/oradata/NEW10/test01.dbf";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 8, 3, 2, 9, 7;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 17-AUG-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00008 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00002 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00009 to /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnndf_TAG20100817T140128_66nl7174_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnndf_TAG20100817T140128_66nl7174_.bkp tag=TAG20100817T140128
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:02:45
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00007 to /opt/oracle/base/oradata/NEW10/test01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd0_WEEKLY_66nl9m8k_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd0_WEEKLY_66nl9m8k_.bkp tag=WEEKLY
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:06:55
Finished restore at 17-AUG-10
datafile 1 switched to datafile copy
input datafile copy RECID=6 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1sf_.dbf
datafile 8 switched to datafile copy
input datafile copy RECID=7 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1r9_.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=8 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_66o0x1vr_.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1vj_.dbf
datafile 9 switched to datafile copy
input datafile copy RECID=10 STAMP=727294911 file name=/opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1rs_.dbf
contents of Memory Script:
# set requested point in time
set until scn 1791053;
# online the datafiles restored or switched
sql clone "alter database datafile 1 online";
sql clone "alter database datafile 8 online";
sql clone "alter database datafile 3 online";
sql clone "alter database datafile 2 online";
sql clone "alter database datafile 9 online";
sql clone "alter database datafile 7 online";
# recover and open resetlogs
recover clone database tablespace "TEST", "SYSTEM", "UNDOTBS1", "SYSAUX" delete archivelog;
alter clone database open resetlogs;
executing Memory Script
executing command: SET until clause
sql statement: alter database datafile 1 online
sql statement: alter database datafile 8 online
sql statement: alter database datafile 3 online
sql statement: alter database datafile 2 online
sql statement: alter database datafile 9 online
sql statement: alter database datafile 7 online
Starting recover at 17-AUG-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting incremental datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00007: /opt/oracle/base/oradata/NEW10/test01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd1_DAILY_66nmf6qs_.bkp
channel ORA_AUX_DISK_1: piece handle=/opt/oracle/base/flash_recovery_area/NEW10/backupset/2010_08_17/o1_mf_nnnd1_DAILY_66nmf6qs_.bkp tag=DAILY
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
starting media recovery
archived log for thread 1 with sequence 39 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_39_66nmc1dg_.arc
archived log for thread 1 with sequence 40 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_40_66nmcfw4_.arc
archived log for thread 1 with sequence 41 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_41_66nmcwcf_.arc
archived log for thread 1 with sequence 42 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_42_66nmddbw_.arc
archived log for thread 1 with sequence 43 is already on disk as file /opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_43_66o0wyys_.arc
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_39_66nmc1dg_.arc thread=1 sequence=39
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_40_66nmcfw4_.arc thread=1 sequence=40
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_41_66nmcwcf_.arc thread=1 sequence=41
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_42_66nmddbw_.arc thread=1 sequence=42
archived log file name=/opt/oracle/base/flash_recovery_area/NEW10/archivelog/2010_08_17/o1_mf_1_43_66o0wyys_.arc thread=1 sequence=43
media recovery complete, elapsed time: 00:00:50
Finished recover at 17-AUG-10
database opened
contents of Memory Script:
# make read only the tablespace that will be exported
sql clone 'alter tablespace TEST read only';
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/opt/oracle/base/flash_recovery_area''";
# create directory for datapump export
sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/opt/oracle/base/flash_recovery_area''";
executing Memory Script
sql statement: alter tablespace TEST read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/opt/oracle/base/flash_recovery_area''
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/opt/oracle/base/flash_recovery_area''
Performing export of metadata...
EXPDP> Starting "SYS"."TSPITR_EXP_BkAq":
EXPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE
EXPDP> Processing object type TRANSPORTABLE_EXPORT/GRANT/OWNER_GRANT/OBJECT_GRANT
EXPDP> Processing object type TRANSPORTABLE_EXPORT/INDEX
EXPDP> Processing object type TRANSPORTABLE_EXPORT/CONSTRAINT/CONSTRAINT
EXPDP> Processing object type TRANSPORTABLE_EXPORT/INDEX_STATISTICS
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TRIGGER
EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
EXPDP> Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
EXPDP> Master table "SYS"."TSPITR_EXP_BkAq" successfully loaded/unloaded
EXPDP> ******************************************************************************
EXPDP> Dump file set for SYS.TSPITR_EXP_BkAq is:
EXPDP> /opt/oracle/base/flash_recovery_area/tspitr_BkAq_82690.dmp
EXPDP> ******************************************************************************
EXPDP> Datafiles required for transportable tablespace TEST:
EXPDP> /opt/oracle/base/oradata/NEW10/test01.dbf
EXPDP> Job "SYS"."TSPITR_EXP_BkAq" successfully completed at 18:25:02
Export completed
contents of Memory Script:
# shutdown clone before import
shutdown clone immediate
# drop target tablespaces before importing them back
sql 'drop tablespace TEST including contents keep datafiles';
executing Memory Script
database closed
database dismounted
Oracle instance shut down
sql statement: drop tablespace TEST including contents keep datafiles
Removing automatic instance
shutting down automatic instance
target database instance not started
Automatic instance removed
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_temp_66o1k480_.tmp deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_3_66o1k0mg_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_2_66o1jyt4_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/onlinelog/o1_mf_1_66o1jx3w_.log deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1rs_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_sysaux_66o0x1vj_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_undotbs1_66o0x1vr_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1r9_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/datafile/o1_mf_system_66o0x1sf_.dbf deleted
auxiliary instance file /opt/oracle/base/flash_recovery_area/NEW10/controlfile/o1_mf_66o0wsh8_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/17/2010 18:25:36
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on default channel at 08/17/2010 18:25:25
RMAN-11003: failure during parse/execution of SQL statement: drop tablespace TEST including contents keep datafiles
ORA-00604: error occurred at recursive SQL level 1
ORA-00060: deadlock detected while waiting for resource
Recovery Manager complete.
please give your valuable suggestion .It should be more helpful for us.
Edited by: user10750009 on Aug 20, 2010 1:07 AM
Edited by: user10750009 on Aug 20, 2010 1:15 AM

I want TSPITR ,during this operation i faced this deadlock error.
Before that we faced roll backsegment error for that we applied follwing workaround .
If i applied follwing workaround before every backup and restore .i didn't get any error .all things went successful.
spool /tmp/Createtest.log
connect / as sysdba
REM Perform startup in case we are still down
ALTER SYSTEM SET PROCESSES=500 SCOPE=SPFILE;
SHUT IMMEDIATE;
STARTUP MOUNT EXCLUSIVE;
ALTER DATABASE ARCHIVELOG;
ARCHIVE LOG START;
ALTER DATABASE OPEN;
connECT / as sysdba;
alter system set undo_management = MANUAL scope=spfile;
shutdown immediate;
startup;
Connect / as sysdba;
DROP TABLE TEST123;
create table test123 (t1 number, t2 varchar2(10));
begin
for i in 1.. 300000 loop
insert into test values (i,'AAAAAAAAAA');
end loop;
end;
delete test123;
commit;
alter system set undo_management = auto scope=spfile;
shutdown immediate ;
startup ;
The above workaround we applied before creating tablespace and datafile ,after that we face some dead lock error while restore TSPITR .Did you need any more information
Edited by: user10750009 on Aug 20, 2010 1:12 AM

Error while doing multiple object updation from EP ! object lock error

HI all,
I am doing multiple object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
Though i am using Lock and unlock method before and after calling RFC the project lock error comes up.
What might be the reason
regards
sandeep

Hi Sandeep,
Is the RFC you use for locking in the same model as the bapi BAPI_PROJECT_MAINTAIN? If it is not then you are using two connections for communication with the sap R/3 backend.
You can do 2 things.
1. You could add the RFCs for locking in the same model as the BAPI_PROJECT_MAINTAIN
2. Instead of adding the RFCs in one model synchronize the connections the models use as follows:
IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
IWDDynamicRFCModel model2 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model2.class);
model1.setConnectionProvider(model2);
You can do this in the wdDoInit. This will make sure both models use the same connection but closing a connection will close both at the same time.
The same problem applies to commit/rollback functionality.
Regards,
Jeschael

System Lock Error while reset & reversing the cleared document - FBRA

Hi Experts,
Currently using t-code FBRA, when user trying to reset & reverse the cleared document , they are facing "System Lock Error". We have analyzed on this issue and found SAP note no. u201C487347 u2013FBRA: Overflow of the lock table in production systemu201D . After implementation of this note, SAP has created one new transaction code, FBRA_LOAC.
However, when we tried to reset & reverse the cleared document using t-code FBRA_LOAC, we face the same error.
Can you help me to resolve this issue ?
Thanks in advance.
Regards,
Manish

Hi:
We once faced these issue and got it resolved by extending parameter after extending the profile-parameter "enque/table_size", as per note note 13907. Do not forget the restart the server after extension.
Regards

Error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'.

I'm continually getting an error message when using FM 'BAPI_BUPA_ADDRESS_CHANGE'. The message being 'Table BAPIADTEL entry to be changed not found in target system'.
I have looked up this message but all links seem to refer to FM 'BAPI_BUPA_CENTRAL_CHANGE', which I'm not using, and has different parameter settings.
I'm simply trying to update the telephone number and I'm updating strcuture BAPIADTEL and BAPIADTELX but still the message appears. I know that there is a really simple reason for this, but I have been double-checking everything and experimenting with lots of different areas, but with no effect.
Has anyone encountered this problem using the specific FM ''BAPI_BUPA_ADDRESS_CHANGE' ?.
Jason

Hi Jason,
In case your database tables had already value for field telephone number, then only the flag should be "U".
If the telephone number field was empty, and we will try to change it by using the flag as U, it wont work. In this case, we should be using "I".
I even wrote that before in this post, but somehow I guess the post was locked, and a lot of comments from you and me were not visible apart from the first two. So, I couldnt get any update from you.
Anyway, its good that its working for you. Thank you for the update.
Regards,
Susanta

Email locked error

Can someone help on the following error : "org.jaxen.XPathSyntaxException" and "javax.mail.AuthenticationFailed xception: Can't get lock. Mailbox in use" .... 16:40:49,564 ERROR [AWS] stalling action-instance: 823 with message: Exception ccurred - explicitly stalling action. Exception:org.jaxen.XPathSyntaxException: Unexpected '' 16:40:49,861 INFO [STDOUT] org.jaxen.XPathSyntaxException: Unexpected '' 16:40:49,861 INFO [STDOUT] at org.jaxen.BaseXPath.<init>(BaseXPath.java:13 ) 16:40:49,861 INFO [STDOUT] at org.jaxen.BaseXPath.<init>(BaseXPath.java:15 ) 16:40:49,876 INFO [STDOUT] at org.jaxen.dom.DOMXPath.<init>(DOMXPath.java: 9) 16:40:49,876 INFO [STDOUT] at com.adobe.workflow.jaxen.dom.DefaultDOMXPath <init>(DefaultDOMXPath.java:43) 16:40:49,876 INFO [STDOUT] at com.adobe.workflow.tools.qde.utils.XpathExpr ssionParser.process(XpathExpressionParser.java:45) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.tools.qde.utils.XpathExpr ssionParser.setXpathExpression(XpathExpressionParser.java:189) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.tools.qde.utils.VariableE pressionParser.process(VariableExpressionParser.java:40) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.tools.qde.utils.VariableE pressionParser.setXpathExpression(VariableExpressionParser.java:90) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.tools.qde.utils.Expressio Wrapper.setXpathExpression(ExpressionWrapper.java:119) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.tools.qde.utils.Expressio Wrapper.<init>(ExpressionWrapper.java:58) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.qpac.emailreceiver.EmailR ceiverService.processEmail(EmailReceiverService.java:270) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.qpac.emailreceiver.EmailR ceiverService.runTask(EmailReceiverService.java:100) 16:40:49,892 INFO [STDOUT] at com.adobe.workflow.tools.qde.pat.service.PAT bstractPollingServiceEx.onMessage(PATAbstractPollingServiceEx.java:151) 16:40:49,907 INFO [STDOUT] at com.adobe.workflow.engine.ProcessEngineBMTBe n.sendMessage(ProcessEngineBMTBean.java:1626) 16:40:49,907 INFO [STDOUT] at com.adobe.workflow.engine.ProcessEngineBMTBe n.sendMessage(ProcessEngineBMTBean.java:1556) 16:40:49,907 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor228.invok (Unknown Source) 16:40:49,907 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.inv ke(DelegatingMethodAccessorImpl.java:25) 16:40:49,907 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java: 24) 16:40:49,907 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Cont inerInterceptor.invoke(StatelessSessionContainer.java:683) 16:40:49,907 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedC nnectionInterceptor.invoke(CachedConnectionInterceptor.java:185) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor. nvokeNext(AbstractTxInterceptor.java:84) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptorB T.invokeNext(AbstractTxInterceptorBMT.java:144) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorBMT.invok (TxInterceptorBMT.java:62) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstan eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.in oke(SecurityInterceptor.java:120) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke( ogInterceptor.java:191) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInte ceptor.invoke(ProxyFactoryFinderInterceptor.java:122) 16:40:49,923 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inte nalInvoke(StatelessSessionContainer.java:331) 16:40:49,939 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.jav :723) 16:40:49,939 INFO

Turn off your phone. Then figure out how to keep it from causing problems.

ITunes error: library file locked after trying to reset 3rd G ipod

So I haven't used my 3rd generation ipod in a about two weeks, but last time i used it it was fine. Today when i turned it on, it displayed a folder and had "www.applecom/support/ipod" written underneath then automatically shut itself down.
When i tried to connect it to my macbook, itunes popped up, and it said: "your ipod needs to be restored, please click here to restore it." and i did. However, after downloading the software, it gave an error and said it could not be restored. So, i tried again, same error. I then disconnected the ipod and reconnected it. This time, when the macbook said it could not read the disk, it directed me to disk utilities.
In disk utilities, I tried to erase the ipod, but that didnt work. Then it tried to open itunes, but then it gave me that deathly error:
The iTunes library is locked, on a locked disk, or you do not have permission to write the file.
the error given when i tried to restore my ipod was: 1418
now my question(s) is:
1. how do i get itunes to start working again? EDIT: i figured it out
2. is there still any chance to save my ipod? How?

EDIT: found the answer on the ipod topic:
http://discussions.apple.com/thread.jspa?threadID=842627&tstart=15

Lock error while Changing the Routings through IDoc

Hi All,
we are trying to change the routing by passing change mode X using IDoc /SAPMP/ROUTING01 with message type /SAPMP/ROUTING and we using the function module /SAPMP/IDOC_INPUT_ROUTING to process the IDoc. We have no problem while creating but when we are trying to change we getting errors that Header, Operation & Sequence cannot be locked (lock management error).
On executing this IDoc we are getting errors with meggase No. CPCL015 Header cannot be locked(lock management error), CPCL218 Operation cannot be locked(lock management error), CPCL115 Sequence cannot be locked (lock management error).
Please help me in resolving this isuue.

Use OP77 to define work area. Check the flag for locking the header and use that work area in BAPI interface for changing the task

DEAD LOCK ERROR

When we are using our oracle application, our session hang every time the user update records. the DBA said that we have a dead lock error... the only thing he did is to reset sa database every time we in counter this problem. but we have this error every day, and i don't have an ideal regarding what is dead lock.

you don't have a deadlock problem, because a deadlock will be "solved" as oracle simply kills the blocking session and rollbacks the changes.He is right. you might have blocking problem not dead lock problem. Find out the blocker and waiter and kill the blocker session.
Following query would give you an idea about who is blocking and who is waiting for :
select /*+ ordered */
a.sid blocker_sid,
-- c.sql_text,
a.username blocker_username,
a.serial#,
-- a.logon_time,
b.type,
b.lmode mode_held,
b.ctime time_held,
c.sid waiter_sid,
c.request request_mode,
c.ctime time_waited
from v$lock b, v$enqueue_lock c, v$session a, v$sqltext c
where c.address=a.prev_sql_addr and
a.sid = b.sid
and b.id1 = c.id1(+)
and b.id2 = c.id2(+)
and c.type(+) = 'TX'
and b.type = 'TX'
and b.block = 1
order by time_held, time_waited
Look for blocker_id and waiter_id. If possible, kill blocker using following command.
select sid,serial# from v$session where sid = blocker_sid;
alter system kill session 'sid,serial#'';
Jaffar

ORA-27086: skgfglk: unable to lock file - already in use

Hi,
I advance I appreciate your time for assistance.
Thu Sep 30 23:07:08 2010
Errors in file /opt/app/oracle/admin/EDITDATA/bdump/editdata_dbw0_21124.trc:
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
ORA-01110: data file 6: '/opt/app/oracle/oradata/EDITDATA/users01.dbf'
ORA-27086: skgfglk: unable to lock file - already in use
Linux Error: 11: Resource temporarily unavailable
I am getting this error for last 2-3 days. I need to start up the database manually.
Daily there is crontab schedule which will take the cold backup and startup the database. When I am checking daily morning. DBt is going into MOUNT stage instead of OPEN stage. I have check the script every thing is fine.
Note: This is happening intermetendly. Also is error is happening with different datafiles each time.
Regards

user818118 wrote:
This is the cold_backup Script ...
1) First, it will shutdown the db.
2) Copy all the crb files to the backup location.CRB files? Do you mean data files, control files and spfile/pfile?
3) Startup the db.
4) ZIp the files.
5) Deletes the old uncompress files.Any special reason why you use this approach? It may in fact be slower than zipping and compressing on the fly.
For example, 10GB of data files need to be be backed up. You can follow the above approach and make a 10GB copy. Then read that copied 10GB (20GB in total read at this stage) and then compress it (CPU resources needed) and then write 5GB of compressed data (assuming a 50% compression ratio was achieved).
Now compare this with reading 10GB, compressing it (CPU resources needed) and then writing 5GB. Not only is this significantly less I/O to do, but less physical space is needed too.
As for your problem - you can add some debugging code into the cold backup script to show whether any processes are using any of the Oracle datafiles prior to starting the Oracle instance. If so, then doing a process listing of the "guilty" process to determine who it is.
Also keep in mind that you also need clean starts and exits from shell scripts... in other words, what happens if a 2nd copy of the cold backup is started? Or when a previous run failed and is stuck as a background process?
In my experience, this is often the cause of the problem you're seeing - the database is started up, but the cold backup has a rogue process (remnant of some script failure) that still locks Oracle datafiles.

ORA-27086: unable to lock file - already in use

Hi All,
Can any one having Idea about this Error while Upgrading from 9.2.0.4.0 to 10.2.0.2.0 on AIX 5.2 after software Installation before patch set apply when i try to start the Database im Getting this Error Below
SQL> startup mount
ORACLE instance started.
Total System Global Area 784334848 bytes
Fixed Size 2022384 bytes
Variable Size 550634512 bytes
Database Buffers 229507072 bytes
Redo Buffers 2170880 bytes
ORA-00205: error in identifying control file, check alert log for more info
Alert_LOG
Mon Jul 3 09:17:15 2006
ORA-00202: control file: '/oracle/QAS/sapdata1/cntrl/cntrlQAS.dbf'
ORA-27086: unable to lock file - already in use
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 8
Additional information: 26492
Please Help me..........
Ahmed

check do u have proper permission to access this file?
and also check whether Is this file is access by 9i database or not.if this is the condition then shutdown the database and startup from 10g home.
27086, 00000, "skgfglk: unable to lock file - already in use"
// *Cause: the file is locked by another process, indicating that it is
// currently in use by a database instance.
// *Action: determine which database instance legitimately owns this file.

ORA-27086: unable to lock file - already in use, Help

We have a windows 2003 server running 10.1.02 w/multiple instances. I created a new, fresh database using DBCA. the db created OK, and I can login as sys.
When I try to create a tablespace, I get these errors. Any suggestions, please?
Thanks,
Leor
SQL> CREATE TABLESPACE BGEN_DATA
2 DATAFILE 'BGEN_DATA.ora' SIZE 1000M REUSE
3 AUTOEXTEND ON NEXT 2M MAXSIZE UNLIMITED
4 ;
CREATE TABLESPACE BGEN_DATA
ERROR at line 1:
ORA-01119: error in creating database file 'BGEN_DATA.ora'
ORA-27086: unable to lock file - already in use
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.

We have a windows 2003 server running 10.1.02
w/multiple instances. I created a new, fresh
database using DBCA. the db created OK, and I can
login as sys.
When I try to create a tablespace, I get these
errors. Any suggestions, please?
Thanks,
Leor
SQL> CREATE TABLESPACE BGEN_DATA
2 DATAFILE 'BGEN_DATA.ora' SIZE 1000M REUSE
3 AUTOEXTEND ON NEXT 2M MAXSIZE UNLIMITED
4 ;
EATE TABLESPACE BGEN_DATA
ERROR at line 1:
ORA-01119: error in creating database file
'BGEN_DATA.ora'
ORA-27086: unable to lock file - already in use
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.First of all, you need to give an absolute path to your datafile. Otherwise, it's going to be hard to track where's the file.
Do you have other database instance running on the same server?
PS, don't cross post on many forum.

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

PUK Locked Error on iPhone3 used as an iPod

Similar Messages

Maybe you are looking for