PulseAudio – high CPU usage

Question

I tried to set up pulseaudio on my computer, but it has very bad performance. When I play a music in Totem, pulseaudio uses about 18% of my CPU, and sometimes it uses 70-80%, and slow down my system. I tried this setting also, but the result even worse: pulseaudio uses always over 50% of my CPU. My CPU: Intel Celeron 2.10GHz. Is this normal?

Answer 1

Hello again, thanks for your time. Here are those outputs:
[user@ThinkPad ~]$ cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
# This file is part of PulseAudio.
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
.nofail
load-module module-console-kit
.fail
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Load DBus protocol
.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
load-module module-switch-on-port-available
### Make some devices default
#set-default-sink output
#set-default-source input
[user@ThinkPad ~]$ cat /etc/pulse/client.conf
# This file is part of PulseAudio.
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
autospawn = no
daemon-binary = /bin/true
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
[user@ThinkPad ~]$ pulseaudio -vvvv
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=87319
D: [pulseaudio] alsa-mixer.c: Activating path analog-output-headphones
D: [pulseaudio] alsa-mixer.c: Path analog-output-headphones (Headphones), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-199, max_dB=0
D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -199.00 dB to 0.00 dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Soft volume PCM
D: [pulseaudio] alsa-util.c: Control: PCM Playback Volume
D: [pulseaudio] alsa-util.c: min_dB: -51
D: [pulseaudio] alsa-util.c: max_dB: 0
D: [pulseaudio] alsa-util.c: resolution: 256
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88200
D: [pulseaudio] alsa-util.c: period_size : 44100
D: [pulseaudio] alsa-util.c: period_time : 1000000
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87319
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6206523236469964800
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6206523236469964800
D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88200
D: [pulseaudio] alsa-util.c: period_size : 44100
D: [pulseaudio] alsa-util.c: period_time : 1000000
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87319
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6206523236469964800
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6206523236469964800
D: [pulseaudio] alsa-util.c: appl_ptr : 0
D: [pulseaudio] alsa-util.c: hw_ptr : 0
D: [alsa-sink] alsa-sink.c: Thread starting up
D: [pulseaudio] alsa-sink.c: Requested volume: 0: 35% 1: 35%
D: [alsa-sink] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
D: [pulseaudio] alsa-sink.c: in dB: 0: -27.34 dB 1: -27.34 dB
I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
D: [pulseaudio] alsa-sink.c: Got hardware volume: 0: 35% 1: 35%
D: [pulseaudio] alsa-sink.c: in dB: 0: -27.20 dB 1: -27.20 dB
D: [pulseaudio] alsa-sink.c: Calculated software volume: 0: 99% 1: 99% (accurate-enough=yes)
D: [pulseaudio] alsa-sink.c: in dB: 0: -0.14 dB 1: -0.14 dB
I: [alsa-sink] alsa-sink.c: Starting playback.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] module-device-restore.c: Could not set format on sink alsa_output.pci-0000_00_1b.0.analog-stereo
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Added 3 ports
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.pci-0000_00_1b.0.analog-stereo.
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "CONEXANT Analog"
I: [pulseaudio] source.c: alsa.id = "CONEXANT Analog"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "HDA Intel"
I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel at 0xf2520000 irq 43"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "8086"
I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
I: [pulseaudio] source.c: device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
I: [pulseaudio] source.c: device.form_factor = "internal"
I: [pulseaudio] source.c: device.string = "front:0"
I: [pulseaudio] source.c: device.buffering.buffer_size = "352800"
I: [pulseaudio] source.c: device.buffering.fragment_size = "176400"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "Built-in Audio Analog Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "Intel IbexPeak HDMI"
I: [pulseaudio] source.c: alsa.components = "HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,00100000"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-source.c: hwbuf_unused=0
D: [pulseaudio] alsa-source.c: setting avail_min=87319
D: [pulseaudio] alsa-mixer.c: Activating path analog-input-microphone-internal
D: [pulseaudio] alsa-mixer.c: Path analog-input-microphone-internal (Internal Microphone), direction=2, priority=89, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=4, min_dB=-74, max_dB=54
D: [pulseaudio] alsa-mixer.c: Element Internal Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Internal Mic, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Dock Mic, direction=2, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Dock Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Dock Mic, alsa_name='Dock Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection unavailable
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -74.00 dB to 54.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -54.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : CAPTURE
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88200
D: [pulseaudio] alsa-util.c: period_size : 44100
D: [pulseaudio] alsa-util.c: period_time : 1000000
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87319
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6206523236469964800
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6206523236469964800
D: [pulseaudio] alsa-util.c: appl_ptr : 0
D: [pulseaudio] alsa-util.c: hw_ptr : 0
D: [alsa-source] alsa-source.c: Thread starting up
D: [pulseaudio] alsa-source.c: Requested volume: 0: 61% 1: 61%
D: [alsa-source] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
D: [pulseaudio] alsa-source.c: in dB: 0: -13.00 dB 1: -13.00 dB
I: [alsa-source] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
D: [pulseaudio] alsa-source.c: Got hardware volume: 0: 58% 1: 58%
D: [pulseaudio] alsa-source.c: in dB: 0: -14.00 dB 1: -14.00 dB
D: [pulseaudio] alsa-source.c: Calculated software volume: 0: 104% 1: 104% (accurate-enough=no)
D: [pulseaudio] alsa-source.c: in dB: 0: 1.00 dB 1: 1.00 dB
I: [alsa-source] alsa-source.c: Starting capture.
D: [pulseaudio] module-alsa-card.c: Found 7 jacks.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in
D: [pulseaudio] device-port.c: Setting port analog-output-speaker to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in
D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status yes
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged
D: [pulseaudio] module-alsa-card.c: Jack 'Dock Mic Jack' is now unplugged
D: [pulseaudio] module-alsa-card.c: Jack 'Dock Mic Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port analog-input-microphone-dock to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port analog-input-microphone to status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 6ef9d39731256f49a4e920c50000000c as :1.243
D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #7; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #10; argument: "").
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-console-kit.so': success
I: [pulseaudio] client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-systemd-login.so': success
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-dbus-protocol.so': success
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Card added for object /org/pulseaudio/core1/card0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/sink0/port0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/sink0/port1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/source1/port0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/source1/port1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/source1/port2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-speaker
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-microphone-dock
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-microphone
D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
D: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: [pulseaudio] protocol-native.c: SHM possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for amarok
D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/kde4/amarok.desktop.
I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending
I: [alsa-source] alsa-source.c: Device suspended...
D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending
I: [alsa-sink] alsa-sink.c: Device suspended...
D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
D: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: [pulseaudio] protocol-native.c: SHM possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for amarok
I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:music.
D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [alsa-sink] alsa-sink.c: Trying resume...
I: [alsa-sink] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [alsa-sink] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink] alsa-sink.c: hwbuf_unused=0
D: [alsa-sink] alsa-sink.c: setting avail_min=87319
I: [alsa-sink] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [alsa-sink] alsa-sink.c: Resumed successfully...
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
I: [alsa-sink] alsa-sink.c: Starting playback.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy.
I: [pulseaudio] resampler.c: Using resampler 'speex-float-0'
I: [pulseaudio] resampler.c: Using float32le as working format.
I: [pulseaudio] resampler.c: Choosing speex quality setting 0.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] sink-input.c: Created input 0 "audio stream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink-input.c: media.name = "audio stream"
I: [pulseaudio] sink-input.c: application.name = "(LibVLC 2.0.1)"
I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
I: [pulseaudio] sink-input.c: native-protocol.version = "26"
I: [pulseaudio] sink-input.c: application.id = "org.VideoLAN.VLC"
I: [pulseaudio] sink-input.c: application.version = "2.0.1"
I: [pulseaudio] sink-input.c: application.icon_name = "vlc"
I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
I: [pulseaudio] sink-input.c: application.process.id = "12831"
I: [pulseaudio] sink-input.c: application.process.user = "user"
I: [pulseaudio] sink-input.c: application.process.host = "ThinkPad"
I: [pulseaudio] sink-input.c: application.process.machine_id = "3655b9585a437822f20048730000086c"
I: [pulseaudio] sink-input.c: application.process.session_id = "3655b9585a437822f20048730000086c-1340342809.561734-495598748"
I: [pulseaudio] sink-input.c: media.role = "music"
I: [pulseaudio] sink-input.c: phonon.streamid = "{c851a8bf-3fcc-444e-ade7-d01d56647288}"
I: [pulseaudio] sink-input.c: application.process.binary = "amarok"
I: [pulseaudio] sink-input.c: window.x11.display = ":0"
I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:music"
I: [pulseaudio] protocol-native.c: Requested tlength=40.00 ms, minreq=20.00 ms
D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] protocol-native.c: Requested latency=0.00 ms, Received latency=0.50 ms
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=14296, base=8, prebuf=0, minreq=7056 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=14296, base=8, prebuf=0, minreq=7056 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 41.02 ms = 0.52 ms + 2*20.00 ms + 0.50 ms
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
D: [alsa-sink] alsa-sink.c: setting avail_min=88190
D: [alsa-sink] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink] alsa-sink.c: Requested volume: 0: 35% 1: 35%
D: [alsa-sink] alsa-sink.c: in dB: 0: -27.34 dB 1: -27.34 dB
D: [alsa-sink] alsa-sink.c: Got hardware volume: 0: 35% 1: 35%
D: [alsa-sink] alsa-sink.c: in dB: 0: -27.20 dB 1: -27.20 dB
D: [alsa-sink] alsa-sink.c: Calculated software volume: 0: 99% 1: 99% (accurate-enough=yes)
D: [alsa-sink] alsa-sink.c: in dB: 0: -0.14 dB 1: -0.14 dB
D: [alsa-sink] sink.c: Volume not changing
D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes.
D: [alsa-sink] alsa-sink.c: Limited to 352160 bytes.
D: [alsa-sink] alsa-sink.c: before: 88040
D: [alsa-sink] alsa-sink.c: after: 88040
D: [alsa-sink] alsa-sink.c: Rewound 352160 bytes.
D: [alsa-sink] sink.c: Processing rewind...
D: [alsa-sink] sink.c: latency = 2372
D: [alsa-sink] sink-input.c: Have to rewind 352160 bytes on render memblockq.
D: [alsa-sink] source.c: Processing rewind...
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending
I: [alsa-sink] alsa-sink.c: Device suspended...
I: [pulseaudio] alsa-sink.c: Updating rate for device front:0, new rate is 44100
I: [pulseaudio] sink.c: Changed sampling rate successfully
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] sink-input.c: Requesting rewind due to uncorking
D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [alsa-sink] alsa-sink.c: Trying resume...
I: [alsa-sink] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [alsa-sink] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
D: [alsa-sink] alsa-sink.c: setting avail_min=88190
I: [alsa-sink] alsa-sink.c: Time scheduling watermark is 0.25ms
I: [alsa-sink] alsa-sink.c: Resumed successfully...
I: [alsa-sink] alsa-sink.c: Starting playback.
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [alsa-sink] alsa-sink.c: Underrun!
I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 1.00 ms
D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
D: [alsa-sink] alsa-sink.c: setting avail_min=88179
D: [alsa-sink] protocol-native.c: max_request changed, trying to update from 14296 to 14464.
D: [alsa-sink] protocol-native.c: Notifying client about increased tlength
D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
D: [alsa-sink] alsa-sink.c: setting avail_min=88179
D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy.
D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0002, suspending
I: [alsa-sink] alsa-sink.c: Device suspended...
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] reserve-wrap.c: Device unlock of reserve-wrapper@Audio0 has been requested and succeeded.
D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming
D: [pulseaudio] reserve-wrap.c: Failed to acquire reservation lock on device 'Audio0': Input/output error
I: [alsa-sink] alsa-sink.c: Trying resume...
I: [alsa-sink] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [alsa-sink] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
D: [alsa-sink] alsa-sink.c: setting avail_min=88179
D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
D: [alsa-sink] alsa-sink.c: setting avail_min=88190
D: [alsa-sink] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
D: [alsa-sink] alsa-sink.c: setting avail_min=88190
I: [alsa-sink] alsa-sink.c: Time scheduling watermark is 0.25ms
I: [alsa-sink] alsa-sink.c: Resumed successfully...
I: [alsa-sink] alsa-sink.c: Starting playback.
I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 1.00 ms
D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
D: [alsa-sink] alsa-sink.c: setting avail_min=88179
D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
D: [alsa-sink] alsa-sink.c: setting avail_min=88179
D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
D: [alsa-sink] ratelimit.c: 11409 events suppressed
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] ratelimit.c: 7449 events suppressed
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] ratelimit.c: 6472 events suppressed
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] ratelimit.c: 7494 events suppressed
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] memblock.c: Pool full
D: [alsa-sink] sink-input.c: Requesting rewind due to corking
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
D: [alsa-sink] ratelimit.c: 7445 events suppressed
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)