Purchase Order and e-mail

Hi gurus,
I send via e-mail purchase documents. Now I'd like to send the same document to 2 different e-mail address for the same vendor. Does anyone know where I can put the second e-mail address and let the system use also this?
Thanks

Hi.
In standard SAP you can not send to Multiple mail id....
But you can send to a group mail id ..
Otherwise follow as......
Maintain the New Mail ID in the Vendor Master But you need to mark the radio Button "Standard Number"
and Generate the Output Message ..
Later you can change the Radio Button to the Old email id..
Thx
Raju

Similar Messages

How to send purchase order via e-mail.

Please could someone let me know how to send purchase order via e-mail.
I am an BC.
e-mailing is functionning however I am not very familiar in settings for MM

No, you do not need to touch ME_PRINT_PO. You need to put code before and after ME_PRINT_PO in the print program.
Step 1 - Copy the standard print program SAPFM06P to make a Z version, lets call it ZSAPFM06P
Step 2 - Copy include FM06PE02 to make a Z version, lets call that ZFM06PE02.
Step 3 - ZSAPFM06P change the statement "Include FM06PE02" to read "Include ZFM06PE02".
Step 4 - In include ZFM06PE02 you will find a subroutine called "ENTRY_NEU". In this subroutine you will see it first calls ME_READ_PO_FOR_PRINTING then calls ME_PRINT_PO. Before it calls ME_PRINT_PO just put:
l_nast-nacha = 1.
CLEAR l_nast-dimme.
This means that ME_PRINT_PO will not e-mail, it will create a spool request.
Step 5 - Still in ZFM06PE02, after ME_PRINT_PO has been called, add new code. First check that ent_retco EQ 0. If it does not then exit.
Step 6 - Get the spool ID created by ME_PRINT_PO by either moving sy-msgv1 to a variable or select from NAST.
Step 7 - Call function CONVERT_OTFSPOOLJOB_2_PDF using the spool ID from step 6, and put the result from table PDF into an internal table you can use later. ALso store the export variable pdf_bytecount, you will need it later.
Step 8 - Call function SX_TABLE_LINE_WIDTH_CHANGE using the table from step 7 as content_in and put the results from content_out into a new internal table.
Step 9 - Add some text into a internal table of type solisti1, this will be the body text of the e-mail.
Step 10 - Add whatever receivers you want into an internal table of type somlreci1. If you just want it to go to the address that the PO would have gone to anyway, select the e-mail address from ADR6 where the address number = l_doc-xekko-adrnr, that is the data from the PO.
Step 11 - Populate an internal table of type sopcklsti1 with data relevant to your PDF table from step 8 and the text table from step 9. You will have to put the size of the PDF from step 7 (pdf_bytecount) on the PDF line and the size of the text will be the number of lines of text * 255.
Step 12 - Add info to a structure of type sodocchgi1. You can add the e-mail title in here, field obj_descr. Also add the size of the PDF and the size of the text from step 12 into doc_size, and give the doc a name in field obj_name. This can be anything, ZPDFPO for example.
Step 13 - Call SO_DOCUMENT_SEND_API1 using the tables from steps 8, 9, 10 and 11 and the structure from step 12. You can amend the sending e-mail also. Set commit_work to space.
Step 14 - That is all you need, but I actually call function RSPO_R_RDELETE_SPOOLREQ to delete the spool request created in step 4, then call NAST_PROTOCOL_UPDATE to add some more messages to the processing log of the PO.
That is all.

How can I send purchase order through SAP mail ?

How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?

just do it as Anji reddy said to you ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the the belwo program is for sending the Spool Request data as Email to any Email id ...
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_sender LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
 INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
 wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
 gd_eventparm LIKE tbtcm-eventparm,
 gd_external_program_active LIKE tbtcm-xpgactive,
 gd_jobcount LIKE tbtcm-jobcount,
 gd_jobname LIKE tbtcm-jobname,
 gd_stepcount LIKE tbtcm-stepcount,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
 it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_sender_type LIKE soextreci1-adr_typ,
 gd_attachment_desc TYPE so_obj_nam,
 gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
 gd_destination LIKE rlgrap-filename,
 gd_bytecount LIKE tst01-dsize,
 gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
 INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
 c_no(1) TYPE c VALUE ' ',
 c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
* to sap-spool
* spool parameters %_print
* archive parameters %_print
* without spool dynpro
* and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
 PERFORM convert_spool_to_pdf.
 PERFORM process_email.
 if p_delspl EQ 'X'.
 PERFORM delete_spool.
 endif.
 IF sy-sysid = c_dev.
 wait up to 5 seconds.
 SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
 ENDIF.
ELSE.
 SKIP.
 WRITE:/ 'Program must be executed in background in-order for spool',
 'request to be created.'.
ENDIF.
* FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
 INTO TABLE it_tbtcp
 WHERE jobname = gd_jobname
 AND jobcount = gd_jobcount
 AND stepcount = gd_stepcount
 AND listident <> '0000000000'
 ORDER BY jobname
 jobcount
 stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
 message s004(zdd) with gd_spool_nr.
 gd_spool_nr = wa_tbtcp-listident.
 MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
 MESSAGE s005(zdd).
ENDIF.
ENDFORM.
* FORM get_job_details *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 eventid = gd_eventid
 eventparm = gd_eventparm
 external_program_active = gd_external_program_active
 jobcount = gd_jobcount
 jobname = gd_jobname
 stepcount = gd_stepcount
 EXCEPTIONS
 no_runtime_info = 1
 OTHERS = 2.
ENDFORM.
* FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att = gd_buffer.
 APPEND it_mess_att.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
* FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
* FORM send_email *
* --> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
 gd_sender_type = space.
ELSE.
 gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
 tables it_mess_bod
 it_mess_att
 using p_email
 'Example .xls documnet attachment'
 'PDF'
 gd_attachment_name
 gd_attachment_desc
 p_sender
 gd_sender_type
 changing gd_error
 gd_reciever.
ENDFORM.
* FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
 EXPORTING
 spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
FORM send_file_as_email_attachment tables it_message
 it_attach
 using p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription
 p_sender_address
 p_sender_addres_type
 changing p_error
 p_reciever.
DATA: ld_error TYPE sy-subrc,
 ld_reciever TYPE sy-subrc,
 ld_mtitle LIKE sodocchgi1-obj_descr,
 ld_email LIKE somlreci1-receiver,
 ld_format TYPE so_obj_tp ,
 ld_attdescription TYPE so_obj_nam ,
 ld_attfilename TYPE so_obj_des ,
 ld_sender_address LIKE soextreci1-receiver,
 ld_sender_address_type LIKE soextreci1-adr_typ,
 ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
 ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish

Open Purchase Orders and Open Sales Orders

Hi,
Please let me know the table names for open purchase orders and sales orders.
Regards,
Prii

HI Priti,
EKPO-ELIKZ "Delivery completed" indicator, This tell if the given PO line items has any open quantity or not.
Logic to find out if a given PO has Open Quantity or not is do the following:
    " select the PO Qunatity.
    SELECT SINGLE MENGE FROM EKPO INTO PO_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP.
    " select the GR qunatity which has been received.
    SELECT SUM( MENGE ) FROM EKBE INTO GR_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP AND
    BWART = '101'.
    " select GR Quantity which has been reversed.
    SELECT SUM( MENGE ) FROM EKBE INTO GR_REV_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP AND
    BWART = '102'.
    POSTED_QTY =   GR_QTY - GR_REV_QTY .
    OPEN_QTY = PO_QTY - POSTED_QTY.
Regards,
-Venkat.

Email of Purchase Order and Payment Advice

Good Morning All
We wish to implement the emailing of payment advice documents to our vendors. However, we are not sure if the changes to the vendor master data required for this will also mean that purchase orders for that vendor will also be emailed. Does anyone know if this is the case or not?

Having done some testing I agree that the requirement for condition data for purchase order output makes it possible to email remittances and not purchase orders i.e. by not creating the MN04 condition data. However, in my testing, when I assigned an email address to the vendor for the purposes of emailing purchase orders, the payment advice produced by the next payment run was also emailed. I'm sure I must be missing something as, if nothing else, this would imply that the vendor would offer the same email address for both purposes. In desperation we are wondering whether we need to maintain multiple email addresses and use the standard number for purchase orders and somehow identify one of the other addresses as that to be used for the remittance.

Want to see combination of Purchase Order and A/P report at material level

Hello,
Anyone familiar with an InfoProvider that will show a combination of Purchase Order and A/P data combined?
I'm specifically looking for a source that includes the PO information at the Vendor / Material level with order value and quantity at the time the PO was created AND accounts payable data at the Vendor / Material level with the invoiced amount and quantity (which may vary for the PO amounts).
Thank you,
Jim

Hi
Have you seen all of the follwoing datasources......
http://help.sap.com/saphelp_nw04/helpdata/en/df/fbb0d62f3a794d98d23609d17e1610/frameset.htm
Hope this helps
Regards
N Ganesh

Last Purchase Order and FI-Document Number of an Vendor

Hi,
i need for an Vendor the last purchase Order and FI-Document Number.
For purchase Order i read EKKO sort this and get the last one.
For FI-Document Number i read BSIK and BSAK sort this and get last one.
Question: is there any faster way (CLASS, FM or TABLE) to get what i need??
Thanks.
Regards, Dieter

HI Dieter,
You can use transaction code ME2L , where you can list of PO issued a particular vendor. List list shows Po no. indecending order. You can double click select the latest PO and through PO history you can get the FI Document no.
I hope this ansers you query.
Regards
Harish

Purchase Order and Purchase Request

Hi Gurus,
do you know how can I get a Purchase Request Number for an item in Purchase Order?
I cannot find it in any BI Content Data Source...
Regards,
Dorota

In R/3 tr: /nme23n- display purchase order
It will show the last Purchase Order that you displayed.
On the Purchase order on the top left corner, click on purchase order, and click "other purchase order".
the pop up asks you to enter either purchase order or purchase order number
enter the purchase request number for which you want to see the purchase order and hit ok and vice versa..
go to status tab and double click on purchase order
you will get the corrsponding purchase order for the purchase request..
and if you chose purchase order on the pop up you can get the purchase request number
For the data source:
2lis_02_itm, 2lis_02_scl
http://help.sap.com/saphelp_sm32/helpdata/en/8d/bc383fe58d5900e10000000a114084/content.htm
Both of them together can address your requirement.

Purchase order and Account assignement category- Change

hi.,
We are trying to receive the Purchase order of High value components into INVENTORY.
However, most of these Purchase Orders were created with account assignments.
Because of that, if we receives these POs, they will be consumed against the object identified in the account assignment.
Additionally, some of these have been invoiced already and would need to be backed out from the finance side.
Question: How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Invenotory.
Also, what are the other options ( FI will not open Previous period) so that the PO's which have been invoiced can be reversed against that AC assignment.
Thanks All

hi Rajesh.,
As mentioned earlier, these Purchase orders are STO's which have been already created and we are waiting to do the GR for the same. Items in the STO PO are of High value which we need to bring into INVENTORY.
But, because these STO PO's were created with account assignments, if we do GR now, they will be consumed against the object identified in the account assignment.
Some of these STO PO's have been invoiced already and FI has indicated that they could cancel the invoices for those STO PO's in previous posting period.
Question again : How can we receive these STO Purchase orders and then make changes through Movement type ( or any other way ) so that the HIgh Value Components that are consumed against that AC assignment can be subsequently moved into Inventory and not to a cost Center (202)
Step (1) Can we cancel the Invoiced items> reverse the GR for invoiced Items>reverse STO for PO ?
Step (2) Can we reverse the STO for PO for which GR has not been done? then
Step (3) Change the PO through ME22N, remove the Account assignment category?
Or how do we correct this situation for
(1) PO's already invoiced.
(2) PO for which GR has not been made. How can we receive them into Stock and not Cost center.
Anticipating a reply
Thanks
Sri

Purchase order and service entry sheet

Hi
Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
Thanks in advance for your help
Tomas

hi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
Service Purchase order for 100 dollars.
Tab service: 2 units for 50 dollars
The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
Service purchase position: 100
LERF-WE: 150
so the purchase order history is inconsistence.
For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
Thanks in advnace for your help
Enzo

Purchase order and goods receipt

Hello to everyone,
is there any way to view only the last purchase order and the last goods receipt for several materials?
Regards

Last PO Number for Several materials can be viewed using T code ME2M & Last GRN Number for Several materials can be viewed using T code MB51.
Regards
Bhavesh Mistry

Purchase Order and Invoice creation

Hi All,
I am having some fields related to Purchase order and Invoice creation, i have to find out the tables to which tables these fields belongs to.
Below are the Header fields:
Wrbtr Tcode - MIRO,
Lfsnr   Tcode - MIGO,
Evertn Tcode - Me32k,
Kbetr Tcode - Me32k,
Kschl Tcode - Mek1,
Selkz Tcode - Mek1,
Werks Tcode - Mek1,
Evart   Tcode - Me31k,
Frgco Tcode - Me35k,
Sddat Tcode - Me35k,
Below are the Detail fields:
Kbetr   Tcode - Mek1,
Konwa Tcode - Mek1,
Lgobe Tcode - Me21n,
Planloc Tcode - Me31k,
Datab   Tcode - Mek1,
Datbi    Tcode - Mek1,
Fromdate Tcode - Me31k,
Todate      Tcode - Me31k,
i have to retrive all these fields from tables, so plz anybody give me exact tables to use in the select quries to retrive these fields.
Thanks in advance,
Balu.

Hi,
U can get the req fields as follows:
Below are the Header fields:
1)Wrbtr Tcode - MIRO- table rseg ,field-wrbtr
give belnr (invoice no ) & BUZEI(item) if known, else, give ebeln,ebelp.
2)Lfsnr Tcode - MIGO,-table mkpf,give mblnr (mat doc no ) & ZEILE(item) field-xblnr or give ebeln,ebelp
3)Kbetr Tcode - Me32k,
table:konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
4)Kschl Tcode - Mek1,
Pass ebeln,ebelp to table ekpo, get mwskx(taxcode), u will get condition type kschl from FM -FI_TAX_GET_CONDITION_TYPES.
or
table:konh or konp or konv.
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV   as KNUMH in 1 of the tables-konh or konp or konv, wil get kschl.
5)Werks Tcode - Mek1,-table-ekpo, field-werks(give ebeln,ebelp)
Below are the Detail fields:
1)Kbetr Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get kbetr.
2)Konwa Tcode - Mek1,
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in 1 of the tables- konp or konv,wil get konwa.
3)Lgobe Tcode - Me21n,give ebeln.ebelp in table ekpo, get lgort.pass lgort to table t001l, u wil get lgobe.
4)Datab Tcode - Mek1,table-konh,field datab
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in - konh ,wil get datab.
5)Datbi Tcode - Mek1,table-konh,field databi
Pass ebeln to ekko, wil get KNUMV.Pass KNUMV as KNUMH in table- konh,wil get databi.
Hope its useful to u.

Purchase order and rfq smartforms issues

Anyone please let me know the issues faced with purchase order and rfq smartforms

Problems I had is changed line items to print a changed PO/RFQ wich will print what was changed with each line.
Can't remember the solution in total. If you search on the FM ME_READ_CHANGES_EINKBELEG in the main program of the SAP standard and setup a default PO to print using the standard program and form medruck you can debug it.
There is a change flag when printing the form, field - NAST-AENDE.
Else the form is very much streight forward.
Regards,
Marius

Purchase order and purchasing requisition .

Hi
What is the difference between Purchase order and Purchase requisition . ?
And why cube are different for them ?
Regards

A purchase requisition is an internal document that's created to initiate a procurement transaction. The requisition is created to identify the materials that are needed to be acquired and when they're needed. Once completed by the initiator, it's sent to the appropriate approvers.
Upon approvals of the requsition have been provided, and a vendor is selected, a purchase order is created. The purchase order is an external document whereby an agreement is made to procure the materials at an agreed upon price and delivery schedule
The InfoCubes for each of these is different due to the nature of the documents (internal v. external).

Purchase order and sales order table name

hi al,
i want to know purchase order and sales order table name in abap.
thanks
varun
Moderator message: please do some own research, this should not take too long.
Edited by: Thomas Zloch on Jan 27, 2012

Hi Sunrag......
If your PO is linked with SO. Then you can fetch customer name easily by FMS in PO.
From there you ca gte the Customer Name into your PLD and it wont hang also.....
Regards,
Rahul

Purchase Order and e-mail

Similar Messages

Maybe you are looking for