Purchase order create problem

Hi Reiner,
I am testing out a scenario with BAPI_PO_CREATE, encountered a few problems:
1. Errors with Date field in some structures.
--> I changed the date field name to ZDATE and that
    fixed it, I remember this was also a problem in
    Connector 1.0. I can only imagine that the Date
    name used clashes with some reserved system date
    field in VB.Net
2. Purchase order schedule lines are being populated
   via structure BAPIEKET and into a table. I have
   declared a BAPIEKET structure and a table but i seem
   to have errors trying to even populate the first field
   of the BAPIEKET structure. The error is as follows:
An unhandled exception of type 'System.NullReferenceException' occurred in <application>
Additional information: Object reference not set to an instance of an object.
The code is:
        Dim strPoItem_Schedules As BAPIEKET
        Dim tblPoItem_Schedules As New BAPIEKETTable
        'schedule lines
        strPoItem_Schedules.Po_Item = "00001"
        strPoItem_Schedules.Serial_No = "0001"
        strPoItem_Schedules.Deliv_Date = "20040407"
        strPoItem_Schedules.Quantity = CLng(1.0)
        tblPoItem_Schedules.Add(strPoItem_Schedules)
Hope you can help coz I did the same with the PO line items table and it is fine...not sure why it is behaving like this for the PO SChedule lines.
Cheers

Reiner, no worries. I fixed it. My bad....careless, I  declared the BAPIEKET structure wrongly.
Cheers

Similar Messages

  • Problem Purchase order created in SAP R/3 sent in to File XI?

    Hi all,
    I am new to XI, learning it myself.
    I am trying to "send purchase order created in SAP R/3 into XI". For that I am following the document titled as <b>"A Beginner’s Guide to SAP XI
    Settings, Part I "</b>. But I am getting problem in connecting R/3 system to XI system.
    I am stuck at very first step in the documentation which says:
           <b>Setting Communication ports:</b> in this it asks for "<b>RFC Destination</b>"
    Please suggest me the step by step procedure to get through it.
    Thanks and Regards,
    Ravi

    Hi,
    go through these links...
    1. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    2. IDOC to File
    3. /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    4. /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    5. Re: Idoc to File Scenario
    regads,
    Ansar.

  • Email Sending of Purchase Order Created versus Print Output

    Dear All,
    I have been successful in sending the Purchase Order created as a PDF Attachment in email.
    The problem i am facing is in the formatting of the attached output.
    The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
    I am not able to find the reason for the difference.
    Only because of this reason, my delivery is on hold.
    Please guide me on how to find where the difference could be and how to rectify it.
    Thanks & Regards,
    Bhavika

    Could you tell us which fonts you tried?
    What device type did you choose? (SPAD transaction, select your output device to determine the device type)
    Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
    Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font)

  • Capture DocEntry of purchase order created by Proc. Confirmation Wizard

    Dear all,
    in SAP B1 2007 I developed a UI DI API addon to read the docentry of all purchase orders created by Procurement Confirmation Wizard.
    I used the et_FORM_DATA_ADD  event created by the wizard when I confirmed the creation of the purchase order.
    In this event, the BusinessObjectInfo.ObjectKey string contained the DocEntry of the new purchase order.
    But now, with SAP 8.81 PL 06, this event is not raised anymore.
    So... now... how can I know the DocEntry  (not DocNum) of the new purchase orders created by Procurement Confirmation Wizard?
    Can someone help me, please?
    Regards
        Emanuele

    Dear all,
    I solved the problem analyzing the event raised by SAP B1 8.81 Proc. Confirmation Wizard.
        Const CONFIRM_PURCHASE_ORDER_FORM_TYPE As String = "540010007"
        Const ERROR_STRING As String = "ERRORE: "
        Const WIZARD_MATRIX_PO_DOCNUM_MESSAGE As String = "540010007-36]"
        Const WIZARD_MATRIX_FORMID As String = "540000036"
        Const WIZARD_LINK_COLUMN_ID As String = "540000005"
        Const WIZARD_VALIDATE_COLUMN_ID As String = "540000003"
    Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, _
                                              ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
            Try
                If pVal.FormType = CONFIRM_PURCHASE_ORDER_FORM_TYPE Then
                    ' event activated by the matrix element
                    If pVal.ItemUID = WIZARD_MATRIX_FORMID And pVal.BeforeAction = True Then
                        ' if event is "matrix link pressed" or "form/matrix validate"
                        If (pVal.EventType = SAPbouiCOM.BoEventTypes.et_MATRIX_LINK_PRESSED And pVal.ColUID = WIZARD_LINK_COLUMN_ID) Or _
                            (pVal.EventType = SAPbouiCOM.BoEventTypes.et_VALIDATE And pVal.ColUID = WIZARD_VALIDATE_COLUMN_ID) Then
                            Dim recordsetTemp As SAPbobsCOM.Recordset = Nothing
                            Dim recordsetTemp2 As SAPbobsCOM.Recordset = Nothing
                            Dim recordsetTemp3 As SAPbobsCOM.Recordset = Nothing
                            Dim oform As SAPbouiCOM.Form
                            Try
                                oform = SBO_Application.Forms.GetForm(CONFIRM_PURCHASE_ORDER_FORM_TYPE, 1)
                                Dim sQuery As String
                                Dim oMatrix As SAPbouiCOM.Matrix = oform.Items.Item(WIZARD_MATRIX_FORMID).Specific
                                Dim ocolumn As SAPbouiCOM.Column = oMatrix.Columns.Item(WIZARD_LINK_COLUMN_ID) ' ("540000005")
                                If oMatrix.RowCount > 0 Then
                                    For iRow As Integer = 1 To oMatrix.RowCount
                                        Dim oEditText As SAPbouiCOM.EditText
                                        oEditText = ocolumn.Cells.Item(iRow).Specific ' pVal.Row
                                        If Not oEditText.Value.Contains(WIZARD_MATRIX_PO_DOCNUM_MESSAGE) Then
                                            Continue For
                                        End If
                                        Dim DocNum As Integer = 0
                                        Dim stemp As String = oEditText.Value
                                        Dim stemp2 As String = ""
                                        Dim iterRow As Integer = 0
                                        ' loop in the string searching for the purchase order docnum
                                        While 1 = 1
                                            If stemp.Contains(" ") Then
                                                stemp2 = stemp.Substring(0, stemp.IndexOf(" "))
                                                Try
                                                    DocNum = CInt(stemp2)
                                                    Exit While
                                                Catch ex As Exception
                                                    stemp = stemp.Substring(stemp.IndexOf(" ") + 1)
                                                    DocNum = 0
                                                End Try
                                            Else
                                                Exit While
                                            End If
                                        End While
                                        If DocNum = 0 Then
                                            Continue For
                                        End If
                                        Dim PO_DocEntry As String = ""
                                        recordsetTemp2 = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                                        sQuery = "SELECT MAX(DocEntry) As MaxDocEntry from OPOR where DocNum = " & DocNum
                                        ' execute SQL query
                                        recordsetTemp2.DoQuery(sQuery)
                                        If recordsetTemp2 IsNot Nothing Then
                                            If recordsetTemp2.RecordCount = 0 Then
                                                Continue For
                                            End If
                                            recordsetTemp2.MoveFirst()
                                            PO_DocEntry = recordsetTemp2.Fields.Item("MaxDocEntry").Value
                                        End If
                                        If PO_DocEntry <> "" Then
                                            ' check if this Purchase Order has already some textlines
                                            ' If it already has text lines, then we don't need to add them to it
                                            recordsetTemp3 = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                                            sQuery = "SELECT count(*) As ExistYN from POR10 where DocEntry = " & PO_DocEntry
                                            recordsetTemp3.DoQuery(sQuery)
                                            If recordsetTemp3 IsNot Nothing Then
                                                If recordsetTemp3.RecordCount > 0 Then
                                                    recordsetTemp3.MoveFirst()
                                                    Dim numOfTextLinesForThis_PO As Integer = CInt(recordsetTemp3.Fields.Item("ExistYN").Value)
                                                    If numOfTextLinesForThis_PO > 0 Then
                                                        Continue For
                                                    End If
                                                End If
                                            End If
                                        End If
                                        ' if this PO still hasn't any texlines, then we try to add to it reading the textlines of Sales Order
                                        ' reopen the purchase order
                                        Dim oPurchaseOrder As SAPbobsCOM.Documents
                                        oPurchaseOrder = oCompany.GetBusinessObject(BoObjectTypes.oPurchaseOrders)
                                        oPurchaseOrder.GetByKey(CInt(PO_DocEntry))
                                        ' loop on every lines
                                        For i As Integer = 0 To oPurchaseOrder.Lines.Count - 1
                                            oPurchaseOrder.Lines.SetCurrentLine(i)
                                            ' if purchase order line was generetated from a sales order
                                            If oPurchaseOrder.Lines.BaseType = 17 Then
                                                recordsetTemp = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                                                ' search the text lines in the sales order
                                                sQuery = "SELECT t11.LineText As LineText "
                                                sQuery &= " from RDR10 t11 "
                                                sQuery &= " Where t11.DocEntry = '" & oPurchaseOrder.Lines.BaseEntry & "' "
                                                sQuery &= "  AND t11.AftLineNum = " & oPurchaseOrder.Lines.BaseLine
                                                sQuery &= "  AND t11.LineType = 'T' and t11.ObjType = " & oPurchaseOrder.Lines.BaseType
                                                sQuery &= " order by t11.LineSeq "
                                                ' execute SQL query
                                                recordsetTemp.DoQuery(sQuery)
                                                If recordsetTemp IsNot Nothing Then
                                                    If recordsetTemp.RecordCount = 0 Then
                                                        Continue For
                                                    End If
                                                    recordsetTemp.MoveFirst()
                                                    ' loop on each text lines found
                                                    While recordsetTemp.EoF = False
                                                        If recordsetTemp.Fields.Item("LineText").Value <> String.Empty Then
                                                            oPurchaseOrder.SpecialLines.LineType = BoDocSpecialLineType.dslt_Text
                                                            oPurchaseOrder.SpecialLines.LineText = recordsetTemp.Fields.Item("LineText").Value
                                                            oPurchaseOrder.SpecialLines.AfterLineNumber = oPurchaseOrder.Lines.LineNum
                                                            oPurchaseOrder.SpecialLines.Add()
                                                        End If
                                                        recordsetTemp.MoveNext()
                                                    End While ' recordsetTemp.EoF = False
                                                End If ' recordsetTemp IsNot Nothing
                                            End If ' oPurchaseOrder.Lines.BaseType = 17
                                        Next ' end-loop on every lines
                                        ' update the purchase order
                                        oPurchaseOrder.Update()
                                    Next
                                End If
                            Catch ex As Exception
                            Finally
                                recordsetTemp = Nothing
                                recordsetTemp2 = Nothing
                                recordsetTemp3 = Nothing
                            End Try
                        End If
                    End If
                End If
            Catch ex As Exception
            End Try
        End Sub
    Regards
        Emanuele
    Edited by: Emanuele Croci on Aug 29, 2011 5:05 PM

  • Purchaser Order Locking Problem In PROXY interfaces

    Hello Experts,
    Scenario is as follows
    landscape is  : NON SAP system ->> PI --> ECC
    Documents flowing is Purchaser order create and change
    Problem is like when i receive same purchase order for change in few fraction of seconds and multiple time as i am already processing the same same PO the next interface goes into a error saying that the PO is locked by user so and so.
    What could be possible solution for to avoid  locking in first place .
    Note its a asynchronous interface XML proxy message.
    Thanks and Regards,
    Anup Deshmukh
    Still waiting for the inputs...!
    PS : Moderators please move it to PI forum if it has to something with PI also

    Self Answered... ! Sorry Closing Old Thread.

  • Purchase order created by "Procurement Document" is not printed automatical

    Hi all experts,
    After and upgrade to 8.81 (from 2005A)  some funcionality was lost.
    In Print Preferences it is set that the document Purchase Order shall be printed automatically when adding document.
    This works if you add the document directly in Purchase module.
    But, if you add the document via a Sales Order
    - on the Logistics tab, mark the field Procurement Document to create the PO -
    the Purchase order is not printed.
    Has anyone seen any changes regarding this functionality or is it a bug?
    Thank you!
    Kind regards,
    Susanna

    Hi all!
    Just F Y I - this is an error in this version that is a candidate for future versions:
    "After detailed investigation of the Business Impact and the Product Strategy we came to the decision that the correction of the system behaviour is not feasible in the currently supported versions of SAP Business One. Theerror has been recorded and is a candidate to be fixed in a future version.
    Please see note 968358 and note 1644710 for further information.
    Like a workaround please use the document printing option to print all the purchase order created using the procurement wizard."
    Thank you for all help!
    //Susanna

  • Link between Purchase orders created and ORCM(Recommendation report)

    Hi,
    In purchase orders created from MRP recommendation report, we want to change the price, warehouse and some UDF's .For this functionality we are stopping the B1 functionality and adding the Purchase orders through our coding,In this scenario once the purchase order is added to B1 the same record should not be visible in MRP recommendation for creating the Purchase order again.
    we are not finding the link how can we update the ORCM table from were MRP recommendation is picking data to change the status field to "D" so that it will be not visible for creating purchase order again.
    Can any one please help in this issue.
    Thanks in Advance.
    Thanks & Regards,
    OmPrakash.
    Edited by: Om Prakash Akarapu on Dec 26, 2008 6:05 AM

    Hi
    in <b>EKKN</b> table you have sales order and Item fields (VBELN and POSNR)
    using these fields search for the deliveries in LIPS table
    EKKN-VBELN = LIPS-VGBEL and
    EKKN-POSNR = LIPS-VGPOS
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Purchase Order created against sales order.. report

    Hi Folks!
    I want to see purchase orders created against sales orders.
    Is there any report?
    Regards

    Hi,
    You can develop your own report by using table VBAK-VBELN(sales document),VBAK-BSTNK(Customer purchase order number).
    Just try....
    Hope it helps you...
    Regards,
    Jaheer.

  • Purchase orders created by buyer only can be viewed

    Dear All,
    Can it possible that Purchase orders created by buyer only can be viewed by him not the ones created by other created under same operating unit.
    Regards

    Hi DInesh,
    Can you explain how it can be achieved by coding in Custom.pll. If you have a example code that would help. I think it is WHEN-NEW-FORM-INSTANCE trigger, the code should see the login/employee of the person and get the buyer id and should restrict the query to only those records created by this buyer id. This is just my thinking without verifying the entire process in applications.
    I think its a bit complex. Can you clarify it a bit detail
    Thanks,

  • Purchase orders created have automatically good receipt

    hello,
    I wish that Purchase orders created have automatically good receipt. What is the manipulation to be made? Thanks for your help.

    Hi
    U have to do setting movement wise in SPRO
    Path SPRO-Material Management -Inventory Management and Physical Inventory - Good Receipts- Automatic Purchase Order Creation
    But if you want to do automatic GR receipt u have to write customised program for creation of GR ( May be check BADI - Craeation for MIGO is useful) nand run batch job for the same
    Edited by: Sanjay  Shah on Feb 8, 2010 3:28 PM

  • Send SMS to customers, If Purchase Order Created?

    Hi Friends,
    We have a requirement that " If Purchase order created, Then system will send a SMS to the respective customer ".
    Could you please tell me the process How to do it?
    Please give me example code and steps to do.
    Thanks in Advance.
    Regards,
    Sarayu.

    Hi,
    Try this.
    [http://help.sap.com/erp2005_ehp_04/helpdata/DE/54/9d9f405660f418e10000000a1550b0/frameset.htm]
    Thanks,
    Sri.

  • Purchase Order created from different client machine with same login ID

    Hi,
    Purchase Order created from different machine using same Login ID. How to trace IP address of that Machines.
    Thanks
    Hemanth

    Hi;
    Please review:
    Re: sql to get Machine IP
    Regard
    Helios

  • Does Anyone know how to add a new partner to purchase order created on VI01/VI02?

    Does Anyone know how to add a new partner to purchase order created on VI01/VI02?
    Please, anyone knows that?
    Regards.
    Rafael.

    Anyone?

  • Automatic Batch creation at purchase order create stage

    Hi
    Is it possible to automatically create a batch when a purchase req converts to a purchase order? 
    There is a batch create button in the material tab of the purchase order so I can manually create a batch at purchase order create (purchase req convert), is it possible to automate this by material?  So a specific material when the PR converts will have the batch created automatically?
    If so how?
    Thanks

    Hi,
    I have double checked with the developers, and I am afraid that it is not possible to activate the automatic batch determination in ME21N.
    Best Regards,
    Arminda Jack

  • Problem to print Purchase Order created in RFC module function

    Hi
    I created a specific RFC function module for using in a BSP application. In this specific function module, I have created a Purchase Order (PO) thanks to the standard module "BAPI_PO_CREATE". The PO is well created but I don't manage to print immediately this PO but the spool is queued. Whereas using SE37, the PO is well created and printed.
    But the customer wants to find the PO immediately in the printer
    Do you know a simply way to solve my problem? I have the feeling that something is lost using RFC module function and the standard module function.
    Thank a lot of for your reply
    Regards
    Francois

    The issue may be because, its used in BSP application.
    may be you need to implement whats explained in this weblog.
    /people/thomas.jung3/blog/2005/08/23/bsp-server-side-printing-for-tableviews
    Regards
    Raja

Maybe you are looking for

  • How can I find the Firefox version on my PC with windows XP? It is not a device.

    I have a PC with Windows XP service Pak 3. How do I find which version of Firefox I have? Please do not assume I have a device and send me to Settings/ device Thank you

  • Problem with creation of a jar file from inside a java program

    Hi, I am trying to create a jar file at runtime from within a java program. I am able to create a jar file just fine using: String[] jarArgs = new String[3]; jarArgs[0] = "cvf"; jarArgs[1] = "C:\temp\myjar.jar"; jarArgs[2] = "C:\temp\this"; sun.tools

  • Is it possible to modify the Calendar object to only show working days?

    Is there a way to configure the Calendar selection, duration calculations, and notification dates in the system to only include working days (i.e. holidays and weekends are not counted and not available for selection)? This is particlular for Purchas

  • How to debug workflow

    hi Experts, I am using wcc11.1.1.7, I know there is a way for debugging service as adding a parameter of &IsPageDebug=1 in url, debug menu will show on the right down of IE, the question is for js log, how to produce js log? is it a log4javascript or

  • Airtunes Streaming Stopped Working w/ iTunes 10.1.1.4

    I use an Airport Extreme and two Airport Express devices to stream music throughout my house. The firmware on all three is up to date. With the release of iTunes 10.0, I could no longer stream music to my two remote Airport Express units. I received