Purchase Requisition Authorization based on Storage Location
Hi MM Gurus,
Our client has got a specific requirement to control the security of purchase requsition creation, change and release based on the storage locations. We have found the authorization object M_BANF_LGO which is to restrict the access of PR based on storage location in purchase requsitions.
The issue is the purchase requsition BAPI does not check this authorization object as per standard SAP.
Does anyone know how to handle the security of purchase requsition based on storage location?
FYI - Our PR release strategy is at item level and not at document level.
Thanks,
Shekhar
Thank you for the reply. In case of purchase requsition for cost center, you can still enter the value of storage location. The storage location comes into picture when the goods receipts are posted against this purchase. However, the storage location value can be entered at PR level.
We have storage location field as "Required" field in all purchase requsitions as there is only one plant and each storage location represents the division.
Similar Messages
-
ME21N: COST CENTER DETERMINATION BASED ON STORAGE LOCATION
Hi,
When creating a purchase order (ME21N) I need to determine the cost center based on storage location. How can I solve this problem?
If the solution goes through creating an USER EXIT, please, have in mind that my knowledge about ABAP is really poor.
Thanks in advance.
Luis Álvarez.Hello Priyanka,
first of all, thanks for your quick response. By COA I suppose you mean Controlling Area.
Secondly, isn't possible to implement something like this for purchase orders?:
https://forums.sdn.sap.com/click.jspa?searchID=18930382&messageID=6494959
Regards,
Luis.
Edited by: LUIS ÁLVAREZ on Nov 20, 2008 8:28 AM -
Display 0valstckval based on storage location (Inventory)
Hi all,
I need to display 0valstckval in webi report based on storage location. Now this valuated stock value comes from revaluations (2lis_03_um) and can be send at the report level based on plants but not on storage location. I know this is how the standard process is. Is there any way we can report the val stock value based on storage location in report?
ThanksHi
You need Append the structure for the UM Datasources and you write the code and can retrieve based on STOR_LOC.
BTW, are you not using Datasource BF-Material movements for Inventory? -
How to control print-out in GI Slip based on storage location
Hi Experts,
Presently my smartform - GI Slip is giving print out for each line item. But the requirement is: no. of print out will depend on no. of storage location, independent of line item. Since GI Slip is a collective slip hence its showing same details for each line item. The print out are first taken from MB1A and then MB90 is for reprocessing.
How can I control the no. of printouts based on storage location
Please help me in this issue...
Thanks in Advance...
Pinki.You have to modify your driver program,
Ex: Loop at < internal table>
AT NEW <storage location>
<New-page>
End at.
End loop.
The above syntax will help you to close the issue.
Rgds,
SR -
Split the Delivery based on Storage location
HI all,
How to Split the Delivery based on Storage location when creating delivery. is there any functional setting ?
Thanks
KrupaliHi KR and Lakshmipathi,
I am having exactly the same requirement. My requirement is that i need to split one Sale Order line into multiple line items in delivery based on the stock in a particular storage location at the time of delivery creation.
Eg.
Line item 10 in Sale order for quantity 100.
Storage location stock in the priority
ST01 = 40
ST02 = 25
ST03 = 2000
I wish to have 3 line items in delivery like
Line item Storage Location Qty
10 ST01 40
20 ST02 25
30 ST03 35
I was able to do the same in the BADI LE_SHP_DELIVERY_PROC ~ SAVE_DOCUMENT_PREPARE
But i am facing problems regarding the inconsistency in delivery document such as Picking status update etc
Suggest if there is any better method to do.
Thanks in advance. -
Authorization Check for Storage Location
Hi Experts,
I have the following requirement :-
I have Plant : P081 created under Company Code : P110.
I have got various Storage Locations under this Plant for example
KT01 - Main Stores
KT24 - Remote Store.
The KT24 store is basically a remote location store. I have activated the Authorization for the Storage Location KT24 in the SPRO Settings
Material Management --> Inventory Management and Physical Inventory --> Authorization Management --> Authorization check for storage location.
I have maintain the following authorizations for the Object M_MSEG_LGO as follows :-
1. OBJECT : M_MSEG_LGO.
>> 2. USER ID : 081Store
>> 3. PLANT : P081
>> 4. STORAGE LOCATION : Kt24
>> 5. ACTIVITY : 01-03
>> 6. MOVEMENT : 101, 102, 201, 221, 261
and authorization for T_code MIGO_GR and MIGO_GI . I want to restrict the user for transaction only for this storage location but the system is allowing the user to post GR document for KT01 stores also.
Can any one suggest a solution or settings that need to be done for the user to be restricted to prepared GR for Storage Location KT24 only.
Thanks in advance.
AJHi,
You set the authorizations to users with tcode PFCG. To know the reason of deny some access run tcode SU53 after SAP denies the access to some documents / objects.
Regards,
Eduardo -
Report including open purchase order quantity for one storage location
Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
AliciahI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material. -
MIGO - Goods issue to determine cost center based on storage location
Hi Experts,
Any idea how to determine the cost center based on the storage location instead of from tcode - OKB9 when creating Good Issue via MIGO_GI?
Points will be awarded for useful solutions. Thanks.Hey Janet,
A Cost center cannot be determined from an SLOC..it si always at the company code and valuation aea level -
Country of Origin based on Storage Location
Hi all,
i would like to understand if the country of origin in the delivery document at the line item level (EIPO_HERKL) to default based on the storage location. even if the COO is available in the material master.
we had tried using user exits but were not successful in updating the same for a domestic delivery.
Regards
ilangoit is the storage location used by a plant at India belongs to
a different country which is closer to india.
Sorry for misunderstanding but still the case is even worse. You should be aware storage location is always assigned to a delivering plant and you have to take the help of ABAPer by implementing a suitable exit to achieve this peculiar requirement.
thanks
G. Lakshmipathi -
Mrp - Purchase request split by different storage location
Dear all,
I have a plant with many storage location; One of these , s001, is located in a different street , so have a different address.
When user needs material for this storage location s001, he creates a reservation by trx MB21.
Storage disposition is deterministic , NO reording point .
I need to split purchase request in case of this storage location s001, but Mrp standard collect purchase request for same vendor / plant .
Do you know a user-exit for do that ?
Regards,
SillyHi Satya,
1. The Requirements are consolidated at plant level and not at the storate location level.
2. Also in the PR/PO the storage location is derived from the data of the material master record. ( default rcvg s.loc)
3. So in case if you need to split, first you need to Split your PO and in the PO the Item data, Recieving s.location should be
edited in this.
4. Even if you Find a User Exit, We need to have manual intervention on this.
Reg
Dsk -
Authorization removal for storage location.
we want to remove authorization for certain users for accessing specific storage location for transfer posting,let say 0002 is not supposed to access by user AABBCC.
to control this my basis team member had removed this storage location in master role of this user where storage location is added(Inventory management/physical inventory) even though system is allowing for processing transactions in this 0002 storage location.
plz suggest the way for restriction of this storage location access to user.Please share with us how you resolved this. That may help others in the future.
-
Inbound delivery split based on Storage Locations
Hello,
We are trying to create a delivery with reference to a PO, having one material but with different storage locations, one managed/linked with EWM and other managed only in ECC. Just want to know how the delivery can be distributed in EWM???
ThanksDear Mani,
Refer link:
Re: Integration of EWM with ECC 5.0
Best Regards,
Amit -
Purchasing Group authorization based on the user
Hi All,
Can anyone suggest me ideas on how to restrict in accessing details of a PO for a purchasing group based on the user who tries to access it .
the object is M-BEST_EKG.
need guidance in using AUTHORITY_CHECK in restriciting PO group based on the userid.
Thanks in advance.
Regards,
RyHi,
ACTIVITY controls what user can do to the PO.
01-Create
02-Change
03-Display
EKGRP controls the purchasing group
To restrict to a specific purchasing group, modify the authorization object in the role which user has to allow the specfic P.Grp. only
Cheers ! -
Purchasing group authorization based on user
Hi All,
Can anyone suggest me ideas on how to restrict in accessing details of a PO for a purchasing group based on the user who tries to access it .
the object is M-BEST_EKG.
need guidance in using AUTHORITY_CHECK in restriciting PO group based on the userid.
how are the users assigned to the authorization object ?
Thanks in advance.
Regards,
RyHi Roby,
I think you can control authorization using transaction PFCG.
refer below SAP link for details on authorization. May help you.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67129f439b11d1896f0000e8322d00/content.htm
Regards,
Atish -
Material Type Movement type and Storage location Authorization Object
Dear All,
My client wants that certain type of material i.e. SFG should not be GR Mvt. type 101 at the FG storage location, they want to restrict to some user ID .
Is there any authorization object or the enhancement to control all three parameter to restrict to particular USER ID?
Thanks in advance.
regards
ALOK ShrivastavaHi,
Please check as follows.
IMG > Material Management > Inv. management and Physical Inventory > Authorization Management
> Authorization Check for Storage Locations (Indicator on)
Regards,
Gaito
Maybe you are looking for
-
Vendor and Customer from 11.5.8 to R12
Dear all, We are using E-Business Suite 11.5.8 and we will re-implement on R12. What is the quickest way to import vendor and customer informations from 11.5.8 to R12? so that we don't have to re-input all informatioin all over again. Please advice.
-
Why does iPad App Store have such a cruddy interface?
I really dislike shopping in the iPad store especially in the Top Charts section: 1. Show More button, why? This is dumb, swipe next page please! 2. 10 pages in and I look at an application, I go back to the list and I'm back at the top of the charts
-
Table name change in procedure dynamically
create table tab1(x number); create table dynamic_table (x number); insert into tab1 values (1); insert into dynamic_table values (1); commit; create procedure proc1 is v_x number; begin execute immediate 'create table mytab as select tab1.* from tab
-
How to find changes through transport request
Hi all, I want to know whcih table and has been changed for that perticular transport request. Regards, Ramprasad
-
Project Server 2010 Business Intelligence performance issue
Hello, We've setup a Project Server 2010 Business intelligence center and everything seems to be working fine. The next day when users attempt to open Sample reports an error occurs that when we apply the "refresh all Data connections" a couple of ti