Purchase Requisition not getting generated in APO

Hi,
I am facing an issue in APO. Once I confirm a sales order, I have to run the Product Heuristic in APO to generate the purchase requisition through rrp3. The problem is the purchase requisition is getting generated without the PR number. The line does not show the number and also the purchase req is not reflecting in ECC. Please refer the screenshot. Kindly help me with this.
Thanks & Regards,
Raja S

Hi Guys,
Sorry for the delayed response. Now got another issue. My CIF model for a Sales Order is not getting activated. I also cleared the queue in APO through /sapapo/cq and then start running the CIF. But it runs for a long period.
What could be the other possible issues with CIF model activation?
I am getting a message box like the below when try to activate the CIF. I keep ignoring the message and trying to run the CIF. But still I am unable to resolve. Kindly help
After resolving this only, I can go for the above mentioned issue. I sincerely thank all your support.
Regards
Raja S

Similar Messages

  • Purchase requisition not getting generated in MD04

    Hi,
         if i have my material with MRP type VB & my ROL is 10. Now if my stock at present is 0.74KG & if i do the MRP run with MD02 then my purchase requisition is getting generated.now i delete the purchase req & try it with MD01 for the whole plant but the same does not happen when i do the MRP run with MD01. my purshase requistion for the same material never gets generated. can anyone tell me what m i missing. following parameters are maintained by me in MD01 & MD02
    Processing key          NETCH
    Create purchase req.    1
    Delivery schedules      3
    Create MRP list         1
    Planning mode           3
    Scheduling              1

    HI,
    Check below threads,
    [MDAB - Planning file entries   |MDAB - Planning file entries;
    [How to use T-code: MDAB and MDRE|How to use T-code: MDAB and MDRE;
    Regards,
    Dhaval

  • Purchase Requisition not getting generated

    Hi,
    In month of April some requirement is given in MD61. When MRP is run, it is not generating planned orders for raw materials. This is because already someone has created manual Purchase orders for those materials.
    But system should not consider these Pruchase orders as these are of month july and august and NOT of current month.So system instead of considering raw material as available, it should create fresh planned orders for raw materilas for current month.
    Please guide if there is any customizing for it??
    Regards.

    Please read the answer of the experts and try to understand it before asking again.
    The reason why SAP won't create new PldOrd or PurReq in your case is:
    1. April; DepReq 200 pcs > - 200 pcs
    2. May; PO 200 pcs > + 200 pcs
    -200 pcs + 200 pcs = 0 pcs
    1. That's why from MRP point of view there's no problem with the quantity - the requirement is covered by the PO item.
    2. As far as the scheduling is concerned there's some problem because you need the goods in April but the PO is for May. That's why SAP gives an exception message after MRP run (check it in MD04 in the "Exception" column) that you should receive the goods earlier...
    So, please understand that qty is ok, scheduling is not ok. MRP gives an exception message that you have to negotiate with your supplier and procure the goods earlier than it was planned originally.
    But MRP won't create new procurement proposal (PldOrd / PurReq) since it would cause a balance different from 0. MRP can't change the requested delivery date on PO as well, since this depends not only on you but your supplier has to agree too.
    Regards,
    Csaba

  • Schedule lines are not getting generated during MRP Run

    Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
    Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
    Can any one help me and suggest me what to be done in this case .
    Thanks & Regards ,
    Nirmalya

    Dear,
    Welcome to SDN,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
    Regards,
    R.Brahmankar

  • Purchase requisition not generated

    Hi Gurus,
    Purchase requisition not generated at the time of sales order for Item category tab. Can you please let me know the posible reason.
    Thanks in advance...

    Hi,
    As per my understanding, you are running Third Party Process,  if yes then, please maintain the following setting for the same;
    Mater Data Settings:
    1. Item Category Group as BANS in sales org 2 in MM02
    2. in MRP2, in procurement type should be 'F'
    SPRO Settings:
    1. Item Category TAS: Maintain Billing relevance as 'F'
    2. in VOV6 Schedule Line CS: doesn't have Movement type therefore keep the field as blank
    3.ASSIGNMENT: assign Schedule line  CS to  item cat TAS in VOV5 and TAS to order type in VOV4
    4. in vov6 Schedule line CS Item Cat as '5' i.e. Third party and account assignment cat as 'X"
    Now run the process..I hope this will help you...
    Regards,
    Bharat B

  • Transportation lane KEY not getting generated in the table

    Transportation lane KEY not getting generated in the table
    Hi folks,
    The issue is like this :
    We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
    Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the  TRPID is getting generated in the table /SAPAPO/V_TRPROD  whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
    ____ for successful upload______________
    se16 --> /SAPAPO/V_TRPROD
    Version = 000
    LOCTO = LOCID KEY for manufacturing location
    MATID = MATID KEY of successfully loaded workorder
    Enter
    This gives the following results
    TRPID = TRPID KEY
    LOCFR = LOCID KEY for manufacturing location
    LOCTO = LOCID KEY for manufacturing location
    MATID = MATID KEY for successfully loaded workorder
    ( This seems a self-lane, i.e both TO & FROM location are same)
    ____ for unsuccessful upload________
    se16 --> /SAPAPO/V_TRPROD
    Version = 000
    LOCTO = LOCID KEY for manufacturing location
    MATID = MATID KEY for unsuccessfully loaded workorder
    Enter
    This gives the following results
    Error = No Table entries found for specified KEYS
    We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
    We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
    Please let us know in case someone faced a similar issue.
    Many Thanks.
    Kumar
    Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

    Yes Anand.
    We deleted the PPM & created it again, which didn't work.
    Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
    The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
    Why this TRPID is not getting generated in our only concern
    Regards
    Kumar

  • PR not getting generated in MD50

    hello,
    anybody please help me.
    My scenario is make to order for FG & SFG. make to stock for RM & Packing material.
    MRP TYPE : PD
    For FG & SFG: Individual Requirement
    For RM & Packing material: collective requirement.
    RM & Packing materil Stratergy group : 10
    Avilability Check : 02 (individual check)
    My problem is when i doing MRP run by using MD50, Purchase request are not getting generated for RM & Packing material when there is not stock, no po & No PR. in MD04 it showing dependent requirement. again when i am doing MRP run with MD02 pr getting generated. please suggest how to resolve this issue.
    my client is asking to generate PR at MD 50 only.
    Thanks & Regards
    bhakta

    MD50 is for sale order planning, system will plan with respect to sale order only -  you are considered the RM and packaging as a MTS scenario, then how the system will plan for RM and Packaging in MD50
    are you procuring raw material with respect to sale order means
    then for RM and packaging,  remove the strategy group  and maintain individual indicator, then run MRP in MD50, system will plan for RM and pacakaging material also

  • FI Doc not getting generated at the time of Asset GRN

    Hi,
    We have created Asset Purchase Order.
    At the time of GRN, FI Doc is not getting generated.
    What changes need to be required from MM side (in OBYC)
    Regards,

    HI PK,
    whether your PO Item have Single Account Assignment or it is Multiple Account assignment.
    Check Distribution in Accoun Assignment Tab at PO item level.
    If it is Single account Assignment, then Accounting Document will be generated at GR where if it is Distributed then, no Accounting Document will be generated.
    In your case, Probably it would be distributed. and as a result of this your PO Item is marked as 'GR non valuated'.
    Check its Delivery Tab. If it is the case, then need not worry as it is std practise. system will treated it as multiple account assignment and its valuation will only be carried out Invoice Verification level.
    Later on check the Material document also.
    Pls Note:
    If flag 'GR non-valuated' is set in the purchase order, the valuation is only executed through the invoice verification. This flag must be set if the purchase order has multiple account assignment.
    A valuated goods receipt for a purchase order with account assignment generates a posting line for the consumption account 'Account-assigned purchase order' (KBS) and for the GR/IR clearing account WRX.
    hope it address your issue.
    Regards,
    S Anand

  • F9N1 - Inbound FINSTA not getting generated

    Hi,
    When I execute F9N1, internal FINSTA are not getting generated..
    The application log shows current Accounts  being edited by end of day processing run
    What could be wrong and what can be done? Any idea..
    The next date in F9K3- Current Account is 11.02.2010
    The F9N1 run date is 12.03.2010
    The F9B1 date - Current date is 12.03.2010
                             New posting date - 15.03.2010
    I am in Development server and trying to add a new company code to the IHC set up. Where can I look into? The internal FINSTA are not getting generated..
    Regards,
    SAPFICO
    Edited by: SAPFICO on Mar 12, 2010 11:25 AM

    Ravi,
    I found the problem.
    Let me explain the whole process for the benefit of other consultants like me.
    Pre-requisites for generating FINSTA IDOC for any account in IHC:
    1. In the account (F9K2 - change account) go to 'Account Statements' TAB and ensure that the 'Next date' is the date on which you are trying to create the bank statement.
    2. In WE20 you should have created a partner profile for the Business Partner (Partner type GP) who is the Account holder.
    3. In this partner profile for the BP there should be a Outbound parameter for FINSTA (without Message code IHC and Message function FI) with basic type FINSTA01. The port used for this Outbound Parameter should be LOCAL.
    4. For the same BP there should be a  Inbound parameter for FINSTA with port and this port should be your client where the subsidiary's company code resides.
    Now when you run F9N1, it will create two FINSTA  IDOC's, one with LOCAL as port and for this the Partner will be your BP who holds the account in the IHC.
    Another FINSTA IDOC will have the House Bank as partner. This IDOC will be succesful only if you have created the account as a House Bank and Account ID in FI12 configuration for the subsidiary company code.
    Hope I have made myself clear.
    Kalyan

  • Purchase requisition not to be created if sales order is incomplete.

    Hi ALL,
    I have a requirement from the business wherin they want purchase requisition not to be created for the incomplete sales order
    in case of third party / invidiual P.O sales orders.
    We have defined some fields in the item category incompletion status and if this fields are empty then the P req shld not generate.
    Can anybody guide me what settings to be made to acheive this.
    Please help me in this.

    In t.code OVA2, try to assign an incompletion procedure at schedule line level. This procedure can be assigned with relevant status like checking goods movement, and general checked. Then test the scenario.
    There is an OSS note out there, but it is NOT exactly represents your scenario. However you can have a look at it.
    Note 623267 - Purchase requisition in spite of missing configuration II
    Regards,

  • "Material purchase requisition" not allowed (Use Status PROV, object TM0000

    Hello Gurus,
    I am getting the following message every time I enter a material in the sales order. The material entered requires a Purchase Requisition (PR) to be created when it is entered in the order. We have done Configuration thru Order Status Profile that will prevent PR creation at time of Order creation. 
    The message is as follows:
    "Material purchase requisition" not allowed (Use
    Status PROV, object TM0000000001VB)
    Solution requested: We do not want to see this message appearing so many times. Can you pl let me know if there is a way to avoid this.
    Thank you
    Vasavi

    Hi Vasavi,
    I am not talking about the po check above that one tab like check purchse order no in this feild keep emty and also below that enter po number also keep un check
    and also please check when you creating sales order beside po date one tab is availble check any data in default that
    that tab name is display doc header details in that tab purchase order tab in that any infirmation is default check that also
    Hope this will helps you
    Prem

  • PIR & CIR is not getting displayed in APO product master

    Hi guys,
        I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
    Thanks
    S.Murali

    I am Basis consultant.
    Regarding RFC, logical system assinement, are the things are configured.
    But still it is not active the integration between R/3 & APO server.
    (Behalf of Murali )

  • Spool not getting generated in OO ALV report

    Hi,
    I developed a report in which we are giving output in same selection screen through OO ALV.
    But,when we are scheduling that report in background,spool is not getting generated.
    Waiting for your reply.
    BR,
    Praveen

    Hi Aparna,
    I tried NEW-PAGE PRINT ON.
    I am pasting source code extract below:
       IMPORT DATA = ME->IT_FINAL2 FROM MEMORY ID SY-CPROG.
        FREE MEMORY ID SY-CPROG.
        CHECK ME->IT_FINAL2 IS NOT INITIAL.
        CHECK LO_DOCK IS INITIAL.
        CREATE OBJECT LO_DOCK
          EXPORTING
            REPID = SY-REPID
            DYNNR = SY-DYNNR
            RATIO = 70
            SIDE  = CL_GUI_DOCKING_CONTAINER=>DOCK_AT_BOTTOM
            NAME  = 'DOCK_CONT'.
        IF SY-SUBRC NE 0.
          MESSAGE 'Error in Docking Control' TYPE 'S'.
        ENDIF.
        IF LO_ALV IS INITIAL.
          TRY.
              LO_CONT ?= LO_DOCK.
              CALL METHOD CL_SALV_TABLE=>FACTORY
                EXPORTING
                  LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
                  R_CONTAINER    = LO_CONT
                  CONTAINER_NAME = 'DOCK_CONT'
                IMPORTING
                  R_SALV_TABLE   = LO_ALV
                CHANGING
                  T_TABLE        = ME->IT_FINAL2.
            CATCH CX_SALV_MSG.
          ENDTRY.
      CLEAR LR_COLUMN.
          TRY.
              LR_COLUMNS = LO_ALV->GET_COLUMNS( ).
              LR_COLUMN = LR_COLUMNS->GET_COLUMN( 'KSCHL' ).
              LR_COLUMN->SET_LONG_TEXT( 'Cond.Type' ).
    CATCH CX_SALV_NOT_FOUND.
          ENDTRY.
    NEW-PAGE PRINT ON.
            LO_ALV->DISPLAY( ).
            NEW-PAGE PRINT OFF.
    I am not getting spool list while executing it in background.
    BR,
    Praveen

  • MC.9 - spool is not getting generated

    Hi Experts,
    When i execute MC.9 transaction in foreground i am able to view the report output. but when i execute it in background spool is not getting generated.
    Please provide me any solution for this issue.
    Thanks
    Pallavi

    Hi
    I have checked list of versions in the 'select version' button.  But my question is when i select 'execute in background', it is not generated spool. Is there any relation between spool and version. If there is, please explain me what it mean and how it relates.
    As i am new to this module i wanted to know it, in brief detailed.
    Thanks
    Pallavi

  • Stock value is not getting updated in APO system From ECC automatically

    Hi All,
    Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
    for this we are using EXIT_SAPLCSTK_001.
    I am using VL10A for delivery and VL06G for PGI
    I have also checked integration model for material and stock.
    Please help me out as it is very urgent.
    Thanks,
    Gaurav Mittal
    Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

    Hi,
    for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
    please check the same.
    if this does not help, let me know in detail the steps which you are following..
    Ram

Maybe you are looking for