Push button application tool bar

Hi All,
i have a push button on application tool bar , i need to disable that button , where can i do this.
Kindly suggest.
Thanks&Regards.
Ramu

Hi,
You can use the excluding addition in the SET PF-STATUS command..
EX.
DATA: ITAB_CODE LIKE SY-UCOMM OCCURS 0 WITH HEADER LINE.
Dummy condition..
IF SY-SUBRC = 0.
A & B will be the function code that you gave in the menu painter..
ITAB_CODE = 'A'.APPEND ITAB_CODE.
ITAB_CODE = 'B'. APPEND ITAB_CODE.
THis will remove the function codes A & B from the menu bar.
SET PF-STATUS EXCLUDING ITAB_CODE.
ENDIF.
Re: Menu Bar - Urgent
Regards
Sudheer

Similar Messages

How to inactive the push button on tool bar of alv report

hi masters,
i m working on the ALV interactive report, in this report i have to do 2 different operation on 2 screen.
eg.- on first screen i have the push button for 'data' and on second screen i will have the push button for 'upload'.
in this i don't want to give the 'upload' button on first screen and same i don't want to give the 'data' button on 2nd screen.
i tried with using the 2 different gui status and 2 different PF-STATUS but its not working.
anyone can tell me how i can deactivate the 'upload' button on first screen and how i can do same for 'get' buttton on 2nd screen.
regards,
vicky

HI Vicky ,
                  if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
     I_CALLBACK_PF_STATUS_SET          = 'FLIGHT'
     I_CALLBACK_USER_COMMAND           = 'BUTTON_CLICK'
has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
FORM FLIGHT    USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
ENDFORM.
Here the "Flight" is the PF_status .
FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
                       SELFIELD type SLIS_SELFIELD.
CASE UCOMM.
    WHEN 'BUTTON!' .
write ur code for button 1.
WHEN "BUTTON"
*Write ur code for button2 .
end case.
endform.
for any queries reply back.
regards

How to add push button in application tool bar in SAP transaction VA01

How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.

There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

Push buttons on application tool bar , should be changed based on radio but

Hi fndz,
i have 2 radio buttons on selection screen.
depend on the radio button i select , the push buttons on
application tool bar of basic list should be changed.
can u plz help me.
Thanks & Regards
kumar

Hii..
Parameters : r1 radiobutton group GRP1 ,
 r2 radiobutton group GRP1 .
START-OF-SELECTION.
 CASE 'X'.
 WHEN R1.
 SET PF-STATUS 'S1'.
 WHEN R2.
 SET PF-STATUS 'S2'.
 ENDCASE.
Note: if you want to call the Same GUI Status (app toolbar), you can use the syntax
SET PF-STATUS 'S1' EXCLUDING <ITAB>
hope this solves ur issue.

Push button in the application tool bar in the standard LDB PNP

Hi ABAPERS,
I have a requirement that in the selction screen to use the standard LDB PNP beyond that I need to pass one push button in the selection screen 1000 ( in the application tool bar beside execute button) actually i passes the push button in the gui status but its not refelcting in the output and in the initilization event also i passed even then its noty working,
initialization.
move 'Cluster ID'(010) to sscrfields-functxt_01.
Thanks and Regards,
Deepthi.

Pavan,
write code like this
TABLES: USR02, "Logon data
SSCRFIELDS. "FIELDS ON SELECTION SCREENS
STANDARD SELECTION SCREEN FOR SCROLLING LEFT AND RIGHT
SELECTION-SCREEN: FUNCTION KEY 1.
SELECTION-SCREEN begin of BLOCK b1.
PARAMETERs p1 type i.
SELECTION-SCREEN end of BLOCK b1.
INITIALIZATION.
SCREEN ICON LEFT AND RIGHT
SSCRFIELDS-FUNCTXT_01 = 'Button'.
start-OF-SELECTION.
Thanks
Bala Duvvuri

Display of push button in the application tool bar in an ALV report

Hello everyone,
Query:
Is it possible to display a custom push button in the application tool bar while displaying an ALV report(1st one)?
On pressing this custom push button will I be able to display another ALV report(2nd one) based on the selection made on the current ALV report(1st one)?

Hiii..
I have written a sample code for You
"Call the below FunctionModule For Displaying The List
" And see the bolded line in the Below FunctionModule
" STANDARD_02 and USER_COMMAND are the subroutine Names
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'STANDARD_02'
 i_callback_user_command = 'USER_COMMAND '
 i_structure_name = 'ZST_SCARR'
 is_layout = is_layout
 it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
is_sel_hide = is_sel_hide
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 it_events = e03_lt_events[]
IT_EVENT_EXIT =
is_print = t
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab = it_scarr
EXCEPTIONS
 program_error = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
 FORM PF_STATUS_SET
" Here Set A Button In Application Toolbar Using PF- Status
FORM standard_02 USING extab TYPE slis_t_extab.
SET PF-STATUS 'STANDA02' EXCLUDING extab.
ENDFORM. "STANDARD_02
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->RS_SELFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE r_ucomm.
 "menubutton with functioncode GOTO's Action
 WHEN 'GOTO'.
 READ TABLE it_scarr INDEX rs_selfield-tabindex. "cursorposit.
 IF sy-subrc = 0.
 WRITE:/ it_scarr-carrid,
 / it_scarr-carrname.
 ENDCASE.
ENDFORM. "USER_COMMAND
Hope it helps..
Regards,
Simy

How to create a new push button in application tool bar in GMGRANT thru BDT

Dear SAP Gurus -
We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
We went through a lot of documents on BDT but do not have a proper solution.
Could you please help.
Thanks in advance.
Regards,
Atul Mohanty

hi,
You can find user-exits (menu exits) to add new menu item.
But, there is no possibility to add new buttons on application tool bar.
Regards,
Sailaja.

Icon with push button on application tool bar

hi
how we place icon along with pushbutton on application tool bar on selecteion screen.
thanks in adv

Hi,
you can check the code below for test,
TYPE-POOLS icon.
TABLES sscrfields.
DATA functxt TYPE smp_dyntxt.
Parameters: test(1) TYPE C.
SELECTION-SCREEN: FUNCTION KEY 1.
INITIALIZATION.
functxt-icon_id   = ICON_GRAPHICS.
functxt-quickinfo = 'graphics'.
functxt-icon_text = 'Graphics'.
sscrfields-functxt_01 = functxt.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
    WHEN 'FC01'.
Message 'Button 1 pressed' TYPE 'I'.
    WHEN OTHERS.
ENDCASE.
START-OF-SELECTION.

How to add button on application tool bar of standard transaction-URGENT

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

Hi,
Go through this thread.
Push Buttons on application toolbar.
Regards,
Vani.

To disable the Application tool bar button in ALV report

Hi Everyone,
Iam using REUSE_ALV_GRID_DISPLAY to display ALV report.
Now my requirement is to disable(I mean grey out) a application tool bar button.
Thanks in advance
Moderator message: please search for available information and try yourself before asking.
locked by: Thomas Zloch on Sep 23, 2010 11:38 AM

We can disable the buttons on the application toolbar as below.
*To Exclude a few buttons from the Application tool bar
data: it_excluding type slis_t_extab.
data: wa_excluding type slis_extab.
wa_excluding-fcode = '&OUP'.
append wa_excluding to it_excluding.
wa_excluding-fcode = '&ILT'.
append wa_excluding to it_excluding.
wa_excluding-fcode = '&ODN'.
append wa_excluding to it_excluding.
and in the FM.....
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'ZPICK'
 is_layout = itlayout
 i_callback_user_command = 'LIST1'
 i_grid_title = <fs>
* i_callback_top_of_page = ' '
 it_fieldcat = itfieldcat[]
 it_excluding = it_excluding
But,no idea on how to disable the whole application tool bar itself ?
K.Kiran.

How can i disable a button in the application tool bar of a standard trans?

Hi Experts,
   I want to disable the create button in the application tool bar of the standard transaction cv03n. Is there any method?

Hi,
In the include 'LCV110F19', the GUI is being called for the screen.
This is the actual code being called.
WHEN c_dms_create.
      SET PF-STATUS 'D100CREATE'.
      SET TITLEBAR 'D100CREATE'.
You can try to code something like below.
DATA: itab TYPE TABLE OF sy-ucomm.
APPEND 'CREATE' TO itab.
SET PF-STATUS 'D100CREATE' EXCLUDING itab.
Kindly reward points by clikcing the star on the left of reply,if it helps.

User exit/ BADI in f-32 / f-28 for adding application tool bar button

Hi Experts,
There is a requirement, for adding application tool bar button in the Transaction codes F-32 / F-28 / Feba_lockbox. So that while clearing documents with reference document, they can upload the data(Reference Documents) from local file and after the data is fetched for clearing, they need to download the data to local file for verification. If the data is verified to be okay, then they can go ahead with simulation and posting. They need this verification to be done in excel sheet, so need to download the data into local file.
I found a BADI in that screen is BADI_LAYER but I don't think it is relevant.
Any help is apreciated!
Is there any EXIT ? Because I can not find it too.
Regards,
Nitin

where you did the enhancement?
I have to create the IDOC once Clear docuemnt is created.. It may help me.

How to add button on application tool bar of standard transaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

HI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).

How to add button on application tool bar of standardt ransaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
these are the avilable user Exits for the Tcode..C203
XCZD0004 Extend authority check for the material-recipe allocati
CMDI001 Determine explosion control for BOM
CPAU0001 Enhancement for Authorization Check in Task Lists
CPDO0001 Test units of measure for reference operation set
CPRE0001 Enhancement for Reorgnization Checks in Task Lists
Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Please give me reward points...

How to hide button in application tool bar

Hi
There is a standard SAP report. after executing it,
There are 5 buttons in application tool bar .
I want to hide 3 of the buttons,
How can I hide them not by change program.
(Ex, can I use transaction variant).
Best Regards,

try to use transaction variant....
Edited by: shan palani on Dec 17, 2008 10:48 AM

Push button application tool bar

Similar Messages

Maybe you are looking for