Put a color to screen fields in dialogue programing

Hi
How can we set a color to screen fields in dialogue programing?
Regards,
Kiran Kumar

We can't. SAP only provides this standard black text. You can however set text fields as bright (in fields properties) which will eventually be displayed in blue color. That's all you can do about this.
There is also one other option of using [Dynamic Documents|http://help.sap.com/saphelp_nw70/helpdata/EN/10/246858055711d4a7410000e83dd863/frameset.htm] which allows to display text in diffent styles (colors and fonts), but this are rather used in forms or as top-of-page in ALVs, not to work with screens themselves.
Regards
Marcin

Similar Messages

Add selection screen field in standard program

Hi Friends,
I have a requirement to add a language selection screen field in standard programs (RFSUSA00, RFITEMGL, RFIDPL11, RFBELJ10_NACC, RFIDPL06, RAGITT_ALV01 , RFASLD15 , S_PL0_86000028 , RFCASH00 , RFIDPL18).
This is such that when I select the appropriate language the output should get printed in that paticular language. Can someone help me with how to do this?
Regards,
Dikshitha

Hi Dixitha,
Use implicit enhancement option.
Desplay the report in se38.
In Menu, go to Edit > Enhancement Operations > Show Implicit Enhancement Options.
The system will show you lines (in color) where you can add your enhancement.
This function will allow you to add business rules, substitute fields, do extra calculations, and other unique, non-standard requirements.
Reddy

How to assign maintenance view to a selection screen field in a program.

Hi Experts,
I have created a custom table. Now, I have a program where there is a selection screen field for example "Load". After entering a value in the selection screen, and press enter, the user must be redirected to the maintenance view of the custom table to modify the specifed record.
Can anyone help me on how to do that?
Thanks a lot for ur precious help.
Regards,
Aksh

Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below <b>threads</b>:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
<b>Reward if helpful</b>
Rgds,

Reset Screen field in dialog program

Hi,
I have four inputs fields in my dialog program, i select based on f4 value and insert into table. Once i press save, the fourth
input field must be automatically reset to blank.So that i again input some value and save.
How to achieve this?

Hi Renjit ,
Once your save operation is successful , clear the corresponding varaible in the program ..
Regads,
Arun

Color for a Field in alv output

Hi All,
I use a field in the ALV grid output which needs to display color (red or green) depending on certain validations. Please tell me how to display color for this field. The program uses oops.
Thanks.

Hi
1. add one more field to ur final internal table say COLOR(4)
2. in layout wa_layout-style_fname = 'COLOR'. " if its grid
wa_layout-style_fieldname = 'COLOR'. "if its list
3. read table itab index 3.
itab-color = 'C410'.
modify itab index 3
4. see program SHOWCOLO for all color codes
1. Add a field of data type CHAR(3) to the internal output table.
2. Enter the color code in the appropriate field of the row to be colored in the internal
output table:
Code: 'Cxy'
C = Color (all codes begin with 'C')
x = color number ('1' - '9')
y = highlight ('0' = off, '1' = on)
3. Assign the internal output table color code field name to the IS_LAYOUT importing
structure IS_LAYOUT-INFO_FIELDNAME field and pass this structure in the ALV call
interface.
To enable row coloring, you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row. So, lets modify declaration of our list data table gt_list.
you should fill the color code to this field. Its format will be the same as explained before at section C.6.3. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field INFO_FNAME of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. e.g. ROWCOLOR
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
You can color an entire row as described in the next section. However, this method is less time consuming.
Coloring Individual Cells
This is the last point about coloring procedures for the ALV Grid. The procedure is similar to coloring an entire row. However, since an individual cell can be addressed with two parameters we will need something more. What is meant by more is a table type structure to be included into the structure of the list data table. It seems strange, because including it will make our list data structure deep. But anyhow ALV Grid control handles this.
The structure that should be included must be of type LVC_T_SCOL. If you want to color the entire row, this inner table should contain only one row with field fname is set to space, some color value at field col, 0 or 1 at fields int (intensified) and inv (inverse).
If you want to color individual cells, then for each cell column, append a line to this inner table which also contains the column name at field fname. It is obvious that you can color an entire column by filling this inner table with a row for that column for each row in the list data table.
Reward points if useful
Regards
Anji

Holding the value in screen-field

Dear All,
I m facing the problem ,while i m putting the value in screen-field and then pressing enter,
value in that screen-field is becoming null automatically.
wht shld i do for holding the value even after PAI.
Thanks in advance.

Hi,
You should define a corresponding variable for that screen field in your program.
data: my_input_field type ... "same name and type as the one used in screen for field
so when you enter data to that field and press ENTER, the data will be transported to that variable and in PAI you have its value there.
Regards
Marcin

Difference between DIALOGUE programming and SCREEN programming

Hi,
Please tell me the difference between dialogue programming and screen programming
jomon

hi
-          A transaction is dialog program that change data objects in a consistant way.
A dialog program must fulfil the following requirements
-          A user friendly user interface.
-          Format and consistancey checks for the data entered by the user.
-          Easy correction of input errors.
-          Access to data by storing it in the data bases.
screen progarmming means.dialogue programming contains.
-          Screens (Dynpros)
-          Each dialog in an SAP system is controlled by dynpros.A dynpros consists of a screen
And its flow logic and controls exactly one dialog step.
-          ABAP/4 module Pool.
     Each dynpro refers to exactly one ABAP/4 dialog program .Such a dialog program is also       called a module pool ,since it consists of interactive modules.
regads
praveen

How to put Mandatory option for selection screen fields in ABAP Queries

Hi Experts
Can anyone tell me how to put mandatory option for the selection screen fields in ABAP Queries.
Manually I had written code in the At Selection Screen option in infoset to display error message if that field is blank.
But I need to display the selection fields with the tick mark (obligatory mark).
How to do this?
Appropriate answers will be awarded

Hi
For parameter option
parameters : p_kunnr type kna1-kunnr obligatory.
For select option
select-options: s_date for vbak-erdat obligatory.
Plz rewards points ,
Regards ,
Ganesh.

Screen Field Color in Module pool

Hi Experts,
                  I have a requirement like based on the field content i want to change the color to the screen field. I have written code like below. But i'm getting dump.
        LOOP AT SCREEN.
          IF screen-group1 = 'G02'.
            screen-color = 'C411'.   -
> Getting dump here
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
Please tell me whether it is possible to give color in module pool or not.
Thanks and Regards,
nag.

Hi Sam,
             Thanks for ur reply. I have tried using only integers.But i'm not getting color. My code is below
        LOOP AT SCREEN.
          IF screen-group1 = 'G02'.
            screen-color = '411'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
color is INT4 type rite but we are passing only 3 characters to screen-color.But i didn't color to my field.

Selection screen field not working in Query

Hi Gurus!
I have a small problem with one of my query that I just created for finding status of our customers. I have a code section which handles it all . The problem is that I ahve a user field called "Check date" which I ahve used in selection screen as well as the layout, when I put a value in this field in the selection screen the report dosent give any output " NO data to display" but when I leave it open it does give me the out put with the saem check date as I ahd entered earlier in my selection screen.
I am not sure where my selection code is working wrong . Could anyone please help me out please.
DATA: ls_vakpa LIKE vakpa.
DATA old_date LIKE sy-datum.
old_date = key_date - num_days.
status = 'ACTIVE'.
check_date = old_date.
* (If I entere this field (check_date) with any date
* and run it does not give me output and without
* entry it dioes give output.
SELECT SINGLE * FROM vakpa INTO ls_vakpa
      WHERE kunde = kna1-kunnr
   AND audat > old_date.
      IF sy-subrc <> 0.
    SELECT SINGLE * FROM vakpa INTO ls_vakpa
        WHERE kunde = kna1-kunnr
      AND audat < old_date.
      IF sy-subrc = 0.
      ls_audat = ls_vakpa-audat.
      ls_vbeln = ls_vakpa-vbeln.
    ELSE.
      CLEAR ls_audat.
      clear ls_vbeln.
    ENDIF.
    status = 'INACTIVE'.
ELSE.
    ls_audat = ls_vakpa-audat.
    ls_vbeln = ls_vakpa-vbeln.
ENDIF.
Edited by: Rob Burbank on Apr 7, 2010 12:08 PM

DATA: ls_vakpa LIKE vakpa.
DATA old_date LIKE sy-datum.
old_date = key_date - num_days.
status = 'ACTIVE'.
check_date = old_date.
if old_date is initial.
   old_date = key_date - num_days.
   check_date = old_date.
endif.
SELECT SINGLE * FROM vakpa INTO ls_vakpa
      WHERE kunde = kna1-kunnr
*      AND audat > old_date.
    AND audat > check_date.
IF sy-subrc <> 0.
    SELECT SINGLE * FROM vakpa INTO ls_vakpa
        WHERE kunde = kna1-kunnr
*        AND audat < old_date.
      AND audat < check_date.
    IF sy-subrc = 0.
      ls_audat = ls_vakpa-audat.
      ls_vbeln = ls_vakpa-vbeln.
    ELSE.
      CLEAR ls_audat.
      clear ls_vbeln.
    ENDIF.
    status = 'INACTIVE'.
ELSE.
    ls_audat = ls_vakpa-audat.
    ls_vbeln = ls_vakpa-vbeln.
ENDIF.

DYNP_VALUES_UPDATE not updating SCREEN FIELD PERNAM

Following code not working. screen field pernam not getting updated. pls advise.
tables:zmara ,DFIES.
PARAMETER: pmatnr LIKE zmara-matnr,
           pernam like zmara-ernam.
AT SELECTION-SCREEN ON PMATNR.
perform p2.
FORM P2.
*****READ
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
      SCREEN_VALUE   LIKE LINE OF SCREEN_VALUES.
DATA: MATNR1 LIKE ZMARA-MATNR,
      ERNAM1 LIKE ZMARA-ERNAM.
SCREEN_VALUE-FIELDNAME = 'PMATNR' .             " Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. " Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            DYNAME                   = SY-CPROG
            DYNUMB                   = SY-DYNNR
            TRANSLATE_TO_UPPER       = 'X'
       TABLES
            DYNPFIELDS               = SCREEN_VALUES.
read TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.
MATNR1 = SCREEN_VALUE-FIELDVALUE.
*OVERLAY MATNR1 WITH '000000000000000000'.
*SHIFT MATNR1 RIGHT DELETING TRAILING SPACE.
UNPACK MATNR1 TO MATNR1.
SELECT ERNAM FROM ZMARA INTO ERNAM1 WHERE MATNR = MATNR1.
ENDSELECT.
*message ERNAM1 TYPE 'I'.
**********UPDATE
CLEAR SCREEN_VALUES[].
CLEAR SCREEN_VALUE.
SCREEN_VALUE-FIELDNAME = 'PERNAM' .             " Field to be read
SCREEN_VALUE-FIELDVALUE = ERNAM1.
APPEND SCREEN_VALUE TO SCREEN_VALUES. " Fill the table
CLEAR SCREEN_VALUE.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            DYNAME                   = sy-CPROG
            DYNUMB                   = SY-DYNNR
       TABLES
            DYNPFIELDS               = SCREEN_VALUES.
loop at screen_values into screen_value.
message SCREEN_VALUE-FIELDVALUE TYPE 'I'.
ENDLOOP.
ENDFORM.
Moderator Message: Put a little more effort from your end. Did you check in Debugger?
Edited by: kishan P on Mar 30, 2011 12:21 PM

Hi Manfred,
Replace all the DYNP_VALUES_UPDATE-related content by the following statement:
SET USER-COMMAND 'xxx'.
While DYNP_VALUES_UPDATE does update the fields, a roundtrip is not triggered so the content of the fields will not be refreshed. The SET USER-COMMAND does that.
Hope this helps you!
Cheers, Roel

Selection screen fields are not getting detected in an infoset in code

Hi All,
I am developing an infoset query using logical database 'PNPCE'. I am facing problem while writing a validation on selection screen fields on an infoset query at infoset code level.
The fields that are under program specific selection are determined at runtime with variables viz. SP$00001, SP$00002 etc. There are actually select options on selection screen of an infoset query.
So I cannot write a direct code on these fields as they do not exist at infoset level and hence cannot be detected.
I want to put down a validation that if user does not select anything on selection-screen and executes the query, then he should get a pop-up message 'Narrow down your search...' and he should go back to selection screen again.
Is there any alternative way to achieve this?

hi,
Your Screen resolution is more in the system that's why while creating it was fine and while executing it was gone after the next field.
so you better create a frame and place that inside it or you can change cols size in the properties about the columns you want

How to populate f4 values to standard pnp selection screen fields

Hi Experts,
my question is how to populate f4 values to standard pnp selection screen field. i am using LDB PNP for a report , it displays several fields with f4 values, i need to remove all the stadard f4 values and want to place my f4 values in the selection screen

Hi Venkat,
To put ur own values in the F4 help of any field...all u have to do is.
1st fetch all the records that u need to display in F4 help list...in one internal table.
and then use the function module 'F4IF_INT_TABLE_VALUE_REQUEST'
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield =
value_org =
tables
value_tab =
return_tab =
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
where retfield is the field for which u need to give the F4 help.
and valu_tab is the internal table in which u have the list of records to be displayed.
this would do the work...
I dont have the system in front of me...as soon as i have...will try to send a piece of code, to make ur work easy.
Till then hope this helps u...all the best
Regards,
Radhika

How to populate the calculated value into screen field.

I am doing one enhancement in QM.I have added one custom screen to notification transaction ( QM01/QM02/QM03) transaction tab strip control using the enhancement QQMA0001.The Details of the calling and called screens as shown bellow
The Calling screen: SAPLIQS0
Screen Number: 7790
Screen Area :USER0001
Called Screen: SAPLXQQM
Screen Number: 0101
I have developed the Custom Screen in screen 0101 and called in PBO of program SAPLIQS0 7790 screen.
The Screen in calling perfectly .The Custom screen having different fields like Raw cost, Intermediate cost, Finished cost, SCAR Cost and Sales Order Cost Etc... These fields are out put filed types. No input for these screens.. I have few doubts regarding this
How to populate the calculated values in Custom screen?
Where we wrote the code to populate the calculated values in custom screen?
You have any idea please guide me
Thanks & Regards,
Samantula

As your screen fields should be global variables in SAPLXQQM, you may initialize them by implementing function module EXIT_SAPMIWO0_008 which also belongs to SAPLXQQM (Customer Exit: Transfer Notification Data to User Screen)

Put a color to screen fields in dialogue programing

Similar Messages

Maybe you are looking for