Put smart ad into window to set maximum size?

I am building an application using Flash Pro CC and Air for Android and I have encountered an issue. I need to put the smart advertisment I have inside of the application inside of a window/frame/box/div that will prevent it from rendering past a certain size. It is rendered using AS3 so the window containing it will need to be AS3 as well. Thank you in advance!

I just tried using safe mode, and no change. I type in a text editor box, or search field, etc. and the window goes huge. I was kind of hoping it was an add-on causing the issue, that would be such an easy fix. Un-install that addon, and my window size stays the same! But no such luck.
It is not maximized, as it would be by selecting the maximized option. Nor is it fullscreen mode (F11 just makes the whole thing get all bizarre, seriously I can't even see the location bar when I do that). It's just a normal window, expanded to fill the whole screen. Before clicking in a text field, I will have the window size set to a square that fills roughly 3/4 of my wide screen monitor. I have this bizarre idea that when I size a window to that setting it ought to stay there until I tell it otherwise. Apparently, Firefox 5 disagrees, and believes it should fill every available corner of the monitor, whenever it chooses. Sigh.

Similar Messages

Set maximum size in Text Form Field Options for a field in bi publisher RTF

Hi All,
How to set maximum size in Text Form Field Options for a field in bi publisher RTF.
I have a RTF whch is having a field in that i need to add some validation condition but after adding certain condition in Add help text tab ,it is not accepting after certain length, how i can increase the length to unlimited,please help me on this
Thnaks

Form fields have some restrictions if your are using version lower than 11g.
They can accommodate only 393 chars. You can add the text in both status bar and help key, which can in total consume 393 chars.
If your code logic is more than that, it can be split into multiple form fields as Avinash suggested or you can use sub template logic and handle coding over there. Again in sub template code can be within/outside form fields.
So there is no option for user to increase the size of form field.

JLabel: how to set maximum size in layout?

I have a BorderLayout that i want to show a JLabel in NORTH. I use HTML in the label message text with one line being centered with <center>. If the overall text of the label is long/big enough, i.e. subsequent text results in line breaks, the cenetered line is cenetered correctly.
however, if the subsequent text is just small, all lines are left justified/adjusted. i guess, the JLabel dimension is not maximized to the maximum available spave in the NORTH area of BorderLayout.
I tried adding the JLabel directly or within a JPanel (also with BorderLayout, then with add(label, BorderLayout.CENTER)), also first set the size of the dialog, added all components and just added the text to the label at the last position. doesn't help.

Tip: putting a border on a JComponent like JLabel helps you see how its parent container is sizing it. I don't know what HTML mark-up you are using, but is the centering necessary?
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
public class Ex {
 public static void main(String[] args) {
 JFrame f = new JFrame("Ex");
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 Container cp = f.getContentPane();
 String text = "Example text";
 Border b = BorderFactory.createLineBorder(Color.BLUE);
 JLabel label0 = new JLabel(text, SwingConstants.CENTER);
 label0.setBorder(b);
 JLabel label1 = new JLabel(text);
 label1.setBorder(b);
 cp.add(label0, BorderLayout.NORTH);
 cp.add(label1, BorderLayout.SOUTH);
 f.setSize(400,100);
 f.setLocationRelativeTo(null);
 f.setVisible(true);
}

GUI - Set Maximum Size

Hello,
I tried setting the maximum size of the screen using this:
WelcomeScreen screen2 = new WelcomeScreen();
                         screen2.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
                         //screen1.setSize(550, 100);
                         screen2.setSize(screen2.getMaximumSize());But it is bigger than the screen, not by much, but still bigger and also, the maximize icon is present (normally when I window is fully maxed it will appear as a restore icon)
Please help!

Still posting in the wrong forum.
Do you not understand the concept of actually searching a forum "BEFORE" posting a question?
This question is asked and answered all the time in the Swing forum. So search there. If you don't find your answer then you post your question there so that people who actually do search the forum first can benefit from the answer given.

Set Maximum size for a subpanel created with splitter bars in LV8

Does anyone know how to set the Maximum size for a subpanel created with asplitter bar? If I show one cluster in the subpanel and use the scroll bar to scroll, I can see more (blank) area than I want. I just want the user to be able to scroll a cluster within a subpanel while the cluster is larger than the view area of the subpanel. I don't want to let the user scroll outside the cluster.
Ravi Beniwal

I apologize for the mixup in terminology. Please read Pane wherever the word Subpanel was used.
Please see the attached VI for a description of my problem.
I would really appreciate any help with this.
Ravi Beniwal
Attachments:
Pane Scrolling Problem.vi ‏10 KB

How to set MAXIMUM size of a formatted string?

Hello
Assume I have an Object foo with a
toString(){ return "a long name to print"; }and that I want to print it with minimum space of 40, I would say
System.out.printf("foo say: %1$40s", foo.toString() )But I need very often to set a maximum width, so that any strings or fields wider than this is truncated. Eg:
System.out.printf("foo say: %1$5s", foo.toString())gives i.e. "foo say: a l..". Is this possible, using the Formatter class (or similar) in Java? So far I have created my own class to enable this, but I want to use as much predefiend classes as possible.
Regards
Fluid

You need to use a precision argument:
String foo = "a long name to print";
System.out.printf("foo say: %.8s", foo); // 8 maxhttp://java.sun.com/j2se/1.5.0/docs/api/java/util/Formatter.html#syntax

Set Maximum size for combobox editor in JTable

Hi guys.
I have a JTable with a custom JTextArea as editor for string datatypes.
On the other hand, I have a combo editor too for some other columns of the table.
My question is to know whether I can force the combox editor not to grow along with the text area.
When I have a multiline text in a cell, I don 't want the combo box editor to fill the entire height of the row (the row height is continuously adjusted as user enter text into the text area cell editor), but to remain as big as just to render one line.
Thanks.

you know there's a swing forum, why not use it :-)
As to your problem: the basicUI simply forces all editors to fit the cell size, returning more reasonable max-sizes for the combo wouldn't help. Way out might be to wrap into a panel with an appropriate layoutManager. Not entirely trivial, would expect some work ...
Cheers
Jeanette

I want to set a maximum size for pictures when FF shows websites. How can i do that? NO I DONT MEAN "HOW TO ZOOM".

I have FF 34 but this problem has been there for a lot of earlier versions. On many webpages there are pictures that cover my whole screen, and I want to set maximum size for showing images on webpages.
I ONLY wanr to change the maximum size of the images, AND IAM NOT asking about how to zoom the webpage.

Do you want to hide large images or merely make them smaller by setting a max-width and max-height?
You would probably have to use JavaScript (bookmarklet) to achieve this reliably.
There are bookmarklets to make large images fit in the window to avoid a horizontal scroll bar
You can try this code in the userContent.css file (adjust the max-width accordingly).
*http://kb.mozillazine.org/userContent.css
<pre><nowiki>img { max-width: 1024px !important; height: auto !important; }</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userContent.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userContent.css file in the editor window
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userContent.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userContent.css.txt file

TS1463 how do you put the ipod into disk mode

how do you put the ipod into disk mode

iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod nano (6th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Volume Down buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod devices with a Click Wheel
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
Older iPod models without a Click Wheel
Before placing the iPod into Disk Mode, verify that it has a charge.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
source: Putting iPod into Disk Mode

Maximum size of a JComboBox in a GridBagLayout

I'm having a problem with a JComboBox inside a GridBagLayout. The general layout is a GridBag with labels / combo / textfields on the first line, a large table in a scrollpane that takes all columns on the second line, and a few labels / combo / textfields on the third.
As long as the combo on the first combo is empty, it looks fine. When it gets populated, the combo gets resized to the size of the largest text. I would like to have it smaller and truncate the text.
I tried to set maximum size, but the GridBag doesnt care. I've been trying with weightx but no success.
What should I do ?

And I would be interested which LayoutManager you prefer using.I don't use a single Layout Manager. I use a combination of Layout Managers to do the job. Thats why this question doesn't have a specific example. Remember LayoutManagers can be nested. The default layout manager for a frame is a border layout. That great for the general look of your application.
a) you add a toolbar to the north
b) you add a status bar to the south
c) you add your main panel to the center.
the main panel in turrn may use nested panels depending on your requirements. I don't do a lot of screen design but I typically use BorderLayout, FlowLayout, GridLayout and BoxLayout. GridBagLayout and SpringLayout have too many constraints to learn and master. They may be good for a GUI tool that only uses a single layout manager for the entire GUI, but I believe a better design is to break down the form into smaller more manageable areas and group components and use the appropriate layout manager for the group. That may or may not be a GridBagLayout for the small group, but I don't think you should force the entire form to use a GridbagLayout.

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the Mac, they are all locked. Help, please. Thanks

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the mac, they are all locked. Help, please!

"I plugged the external into the Mac and moved a folder of images onto the desktop. It looks like it went from read only to not locked. Is this possible?"
Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed

In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.

Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve

Is there a maximum size for photos used in a slideshow? I cannot anymore put my slideshow into a wmv

Is there a maximum size for photos imported in a slideshow ? I cannot anymore put my slide show into a wmv file.

About CLOB size, it's 4Go not 4000 characters - VARCHAR2 supports up to 4000 bytes. Pay attention also to unicode encoding!
Are you using CFQUERYPARAM to insert into the CLOB fields ?
<CFQUERYPARAM CFSQLTYPE="CF_SQL_CLOB" VALUE=" ">
use the Firebug extension (https://addons.mozilla.org/en-US/firefox/addon/1843) in Firefox3 and do some network monitoring: let me know what you're seeing there.
Hope it will help...

I put an audiobook into my itunes and the audiobook setting won't save, it goes back to Music. How can I fix this?

I put an audiobook into my Itunes and I have selected the setting as Audiobook instead of Music but the change doesn't stick. How can I make this work? I've updated all my software and still I can't get the setting to stay on Audiobook.
Thanks!

From King_Penguin in response to an earlier query on this topic:
You should be able to copy it over by connecting your phone to your computer's iTunes and doing File > Devices > Transfer Purchases - it should copy over to the Books part of your library
Cheers,
GB

I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

I guess you mean one of the resume templates.
What "format" have you saved your finished resume in?
The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
There is no Windows version of Pages.
Peter

Put smart ad into window to set maximum size?

Similar Messages

Maybe you are looking for