Q]DATA FNAME(60) VALUE 'myfile' . here do we create a new file or else?

Q] DATA FNAME(60) VALUE 'myfile' . here do we create a new file or refer to an existing file?
Talking of the OPEN DATASET statement.

if u open a file for input purpose, then the file fname should be exist.
otherwise its for output, no need to be exist in the app.server
but u want append data to existed file, then its should be exist in app.server

Similar Messages

To create a new file in application server and transfer data to ti

i am doing the following where i have to create a new file in application server and transfer data to tht file from an internal table.but its saying file cant be opened.the path i am giving to parameter p_prefil is /tmp/prachi.txt.
wats the prob..can anyone help.
DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc <> 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
if sy-subrc <> 0.
write: 'file can not be written'.
stop.
endif.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc <> 0.
write: ' file cannot be closed'.
stop.
endif.

DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc ne 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
write: 'file can not be written'.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc ne 0.
write: ' file cannot be closed'.
stop.
endif.

How can i get back my data after i restored my iphone and accidentally created a new iphone ac.

how can i get back my data after i restored my iphone and accidentally created a new iphone ac.
it did a back up when i started my restored iphone and i cant retrieve my previous backup while i didnt back up on icloud....
the new ac is actually the same apple id as the one i used. I lost all my contact, photos and data of whatsapp...
what can i do...help!

I don't know if this is a similar problem but I wrote 2 notes yesterday on my iphone. I opened my mail to print them and they appeared as notes but wouldn't load. Then I looked at them on my iphone and I could see the notes but they quickly updated to blank with a time of the last edit the same time I tried opening them on my computer.
Yesterday I updated to 4.3.4 I don't know if somehow that affected them. Are they stored somewhere else. Can I get them back?

Need help Take out the null values from the ResultSet and Create a XML file

hi,
I wrote something which connects to Database and gets the ResultSet. From that ResultSet I am creating
a XML file. IN my program these are the main two classes Frame1 and ResultSetToXML. ResultSetToXML which
takes ResultSet & Boolean value in its constructor. I am passing the ResultSet and Boolean value
from Frame1 class. I am passing the boolean value to get the null values from the ResultSet and then add those
null values to XML File. When i run the program it works alright and adds the null and not null values to
the file. But when i pass the boolean value to take out the null values it would not take it out and adds
the null and not null values.
Please look at the code i am posing. I am showing step by step where its not adding the null values.
Any help is always appreciated.
Thanks in advance.
============================================================================
Frame1 Class
============
public class Frame1 extends JFrame{
private JPanel contentPane;
private XQuery xQuery1 = new XQuery();
private XYLayout xYLayout1 = new XYLayout();
public Document doc;
private JButton jButton2 = new JButton();
private Connection con;
private Statement stmt;
private ResultSetToXML rstx;
//Construct the frame
public Frame1() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
//setIconImage(Toolkit.getDefaultToolkit().createImage(Frame1.class.getResource("[Your Icon]")));
contentPane = (JPanel) this.getContentPane();
xQuery1.setSql("");
xQuery1.setUrl("jdbc:odbc:SCANODBC");
xQuery1.setUserName("SYSDBA");
xQuery1.setPassword("masterkey");
xQuery1.setDriver("sun.jdbc.odbc.JdbcOdbcDriver");
contentPane.setLayout(xYLayout1);
this.setSize(new Dimension(400, 300));
this.setTitle("Frame Title");
xQuery1.setSql("Select * from Pinfo where pid=2 or pid=4");
jButton2.setText("Get XML from DB");
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(java.lang.ClassNotFoundException ex) {
System.err.print("ClassNotFoundException: ");
System.err.println(ex.getMessage());
try {
con = DriverManager.getConnection("jdbc:odbc:SCANODBC","SYSDBA", "masterkey");
stmt = con.createStatement();
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
jButton2_actionPerformed(e);
contentPane.add(jButton2, new XYConstraints(126, 113, -1, -1));
//Overridden so we can exit when window is closed
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if (e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void jButton2_actionPerformed(ActionEvent e) {
try{
OutputStream out;
XMLOutputter outputter;
Element root;
org.jdom.Document doc;
root = new Element("PINFO");
String query = "SELECT * FROM PINFO WHERE PID=2 OR PID=4";
ResultSet rs = stmt.executeQuery(query);
/*===========This is where i am passing the ResultSet and boolean=======
===========value to either add the null or not null values in the file======*/
rstx = new ResultSetToXML(rs,true);
} //end of try
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
======================================================================================
ResultSetToXML class
====================
public class ResultSetToXML {
private OutputStream out;
private Element root;
private XMLOutputter outputter;
private Document doc;
// Constructor
public ResultSetToXML(ResultSet rs, boolean checkifnull){
try{
String tagname="";
String tagvalue="";
root = new Element("pinfo");
while (rs.next()){
Element users = new Element("Record");
for(int i=1;i<=rs.getMetaData().getColumnCount(); ++i){
tagname= rs.getMetaData().getColumnName(i);
tagvalue=rs.getString(i);
System.out.println(tagname);
System.out.println(tagvalue);
/*============if the boolean value is false it adds the null and not
null value to the file =====================*/
/*============else it checks if the value is null or the length is
less than 0 and does the else clause in the if(checkifnull)===*/
if(checkifnull){
if((tagvalue == null) || tagvalue.length() < 0 ){
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
root.addContent(users);
out=new FileOutputStream("c:/XMLFile.xml");
doc = new Document(root);
outputter = new XMLOutputter();
outputter.output(doc,out);
catch(IOException ioe){
System.out.println(ioe);
catch(SQLException sqle){

Can someone please help me with this problem
Thanks.

Can anyone help me with this: my daughter lost her unlimited data plan when I used her upgrade.

My daughter lost her unlimited data plan when I used her upgrade to buy a new phone (upgrade transfer). She didn't upgrade her phone, I did. No one told us this was going to happen and the first I knew of it was when I got a letter in the mail telling me of the change. We went back to the store where we bought the new phone and they put in 2 requests for her unlimited plan to be reinstated, but both were denied. They then told us to call Customer Care, but Customer Care doesn't care. Does anyone else have any experience of this and know of any recourse we may have? Thanks for any help you can give me.

tikibar1 wrote:
She didn't upgrade her phone, but you did by using her upgrade. It's her contract that then gets extended, not yours. And, unfortunately, as of last June, whenever you sign a new two-year contract, you lose your unlimited data. You can try to reverse the upgrade and get the unlimited data restored if within 30 14 days, but since Verizon has discontinued the unlimited data plans for everyone, I'm not sure how successful you'll be.
For what it's worth, to keep unlimited data (at least for now; rumor has it that it may be completely gone next summer), you don't want to sign a new two-year contract, but pay full retail price, get the phone elsewhere (like ebay), or use an upgrade from a phone that's on a tiered data plan.
It's 14 days, tiki. Otherwise they are out of luck.

How to create a text file with data.

Hi,
I am writing java code for testing an application, some times test can failed in some cases, I want to display an error message in text file. To that I written the code as like,
BufferedWriter bout;
bout =new BufferedWriter(new FileWriter("test.txt"));
String str=Your input data is not match with pattern
bout.write(str);but here it is creating a text file test without any data in it.
Can any body help that to execute the program properly
Regards
Buntty

sabre150 wrote:
JoachimSauer wrote:
You didn't close your BufferedWriter. Since it's buffered it probably didn't write anything to the underlying file.
Generally you must close every Writer/OutputStream that you no longer use or it won't be written reliably.It's not quite as simple as that. If you have a chain of Writers / OutputStreams then you only have to close() the outer most one since each is responsible for closing any Writer/OutputStream that it wraps. If you do decide to close them individually (a bad idea but people do do it) then you MUST close them starting from the outer most one and working to the most inner one or you will not guarantee to flush any buffered content.Of course. I might have used a misleading phrasing here. What I meant is "Every time you are done with a Writer, you must close it" and not "You must close *every* Writer that you used". Thanks for the clarification.

Error When Creating/Inserting New Marketing Attribute Value

Merry Christmas & Happy New Year,
Need help here, when I create/insert new marketing attribute value in existing marketing attribute, I encounter the following error "The values currently maintained lead to inconsistencies in the database".
In the detail error, it specifies that I was trying to change existing attribute which is not true.
Initially i thought it was authorization issue, but when i do the same procedure in CRM GUI, it works fine, only from Web UI then i encounter the problem.
Any lead is really appreciated.
JD

Hi Robert,
thanks for the info, we did implement the note but still having the error.
we also have implemented following notes but it still does not solve the issue yet.
0001486409 Incorrect counting in CRM_MKTPFCHR_CHECK_STRING_BW
0001490425 Nonsensical values for marketing attributes
0001491491 Field DATUV in AUSP for newsletter scenario
0001499712 Marketing Attributes are not saved properly in WEB UI
0001509448 MKT ATTR:Save value for marketing attribute impossible
0001531447 Problems in CL_CRM_BUIL_MKT_ATTRIB~READ

Default value in field when creating a new vendor (Transaction: XK01)

Hi, everybody!
Is it possible to set a default value to a field when creating a new vendor (transaction: XK01)?
We need the field "Payment terms" in "Payment transactions accounting" tab and field "Terms of payment" in "Purchasing data" tab to be filled with a default value when creating a new vendor.
Thanks in advance
Best regards,
J Madariaga

You can try creating a transaction varient fron SHD0 for this which will default the requiredd values .
-Hari.

Need to add date/time stamp to file name without time change creating new files

We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg ‏46 KB

I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi ‏29 KB

Sql sript for Insert of data with repeating values

It has been a long long time since I had to do write and use any SQL scripts, please forgive the question. I used to use a script to insert values into a table as part of my job. I have forgotten what the script I used was and since lost all my Oracle note books and other DBA material.
I did a search and went through 30 pages of results, I didn't see what I'm looking for.
The data is from one large file that is appended at the end and sometimes updated somewhere in the middle of the set which is considered new data. I am not concern with getting the data out of the file, I got that handled but the insert into the table - transactions - is where I'm lost.
I used to use a script to load the data, about 6 years ago, and it would load the file, exclude the data that was already in the table and insert the new data and the data with the changes.
The data columns are date, time, reference, transaction code, location, debit amount, fee amount, balance.
The date repeats but the time and reference values are unique.
Any help with this script is appreciated.

Hi,
welcome to the forum..!
You can use Oracle's merge statement to (update + insert) data into a table ... if the data exists update it with the new values and if it does not, then insert it.
Here's a link to get you started...
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9016.htm
Since, the data is from a file, you could create an external table on the file and directly do a select from the file.
MERGE INTO bonuses D
   USING (SELECT employee_id, salary, department_id FROM employees
   WHERE department_id = 80) S
   ON (D.employee_id = S.employee_id)
   WHEN MATCHED THEN UPDATE SET D.bonus = D.bonus + S.salary*.01
     DELETE WHERE (S.salary > 8000)
   WHEN NOT MATCHED THEN INSERT (D.employee_id, D.bonus)
     VALUES (S.employee_id, S.salary*0.1)
     WHERE (S.salary <= 8000);in the above example, the
SELECT employee_id, salary, department_id FROM employeesis the source data. instead of loading the file into a temporary table and then merge into the target table , you could read from <<<external_table_on_your_file>> and then do a merge into the target table.
http://www.oracle.com/technology/products/oracle9i/daily/sept19.html
If you encounter any problems, please post the full description of your error.
Thanks,
Rajesh.
Please mark this/any other answer as helpful or answered if it is so. If not, provide additional details/feedback.
Always try to provide create table and insert statements to help the forum members help you better.

Mass data update in Value mapping table

Hi ,
I have used Value mapping replication to update the mass data from external source to Value mapping table . Its updatating in Runtime Cache but i want the data to be visible in GUI Value mapping table as well. Is it possible ? Because i doubt that the data in Runtime Cache may get removed if the system restarts . Can any one help ?
Thanks
Laks

Hi NALLAM GUNA RANJAN,
Thanks for your prompt reply but i didn't get what you are trying to convey . My issue here is
Instead of manually entering key-value pair in Value mapping table , I used Value mapping replication ( http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm )
Its updating the data in Runtime Cache ( you can see this using Cache Monitoring ) but not able to view the data in Actual Value mapping Table (GUI in Directory of SAPXI) I want the data updated using Replication to be visible in GUI table is it possible ?
Hope you got the question much better now
Thanks
Laks

Data error - Double value of Sum row Aggregation

Hello,
I've recently created a new UNX universe based of SQL server query wich brings me determined values for payments and debts, when check the value on my XLS file wich is the main data source for the SQL DB, a single row is for 66,207.70 but on the universe when i check the values it doubles it.
Here are four sets of pictures showing the value of a client PGE/ACRE when it's under AVG aggregation and when it's under SUM aggregation.
Can someone help me identify the reason and how to fix it?

Hi Marvin,
In report level you getting double value so you can unchecked avoid duplicate row.
Thank you
Mustafa

Crystal Reports Date Parameter Default Value OPtion Empty

Is there a way to set a default date value for a Date Parameter? It is shown empty, it only allows to set a fixed date, i.e. 10/10/2013. But it doesn´t allow me to use a formula (which has a CurrentDate inside), so I can set, for example, today's date as default.
How can I achieve this? I´m not using Crystal for Enterprise. I'm using Crystal Reports, the normal version.

Hi Erika,
The feature is only available in CR for Enterprise at the moment.
If you're OK with selecting the currentdate from the dropdown, here's a workaround:
1) Go to the Database Expert > Click the Connection Name > Select 'Add Command' > Type in a simple sql query that returns today's date. Example for oracle would be:
Select SYSDATE from DUAL
2) Don't link this Command Object with other tables on the report
3) Create a new Parameter > Select 'Dynamic' under 'List of Values' > Under the 'Value' column choose 'SYSDATE' from the command object > Click create parameter > OK
-Abhilash

Dynamic sql reurns no data when multiple values are passed.

(Dynamic sql returns no data when multiple values are passed.)
Hi,
While executing the below dynamic sql in the procedure no data is returned when it has multiple input values.
When the input is EMPID := '1'; the procedure works fine and returns data.Any suggestion why the procedure doen't works when input as EMPID := '1'',''2'; is passed as parameter?
=======================================================
create or replace PROCEDURE TEST(EMPID IN VARCHAR2, rc OUT sys_refcursor)
IS
stmt VARCHAR2(9272);
V_EMPID VARCHAR2(100);
BEGIN
V_EMPID :=EMPID;
stmt := 'select * from TEST123 where Empid is NOT NULL';
IF V_EMPID <> '-1' THEN
stmt := stmt || ' and Empid in (:1)';
ELSE
stmt := stmt || ' and -1 = :1';
END IF;
OPEN rc FOR stmt USING V_EMPID;
END Z_TEST;
============================================================
Script for create table
==================================================================
CREATE TABLE TEST123 (
EMPID VARCHAR2(10 BYTE),
DEPT NUMBER(3,0)
===========================================
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('1',20);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
=============================================
Select * from TEST123 where Empid in (1,2,3)
EMPID DEPT
1     20
2     10
3     30
3     30
2     10
===================================================================
Any suggestion why the procedure doen't works when input EMPID := '1'',''2';?
Thank you,

The whole scenario is a little strange. When I tried to compile your procedure it couldn't compile, but I added the missing info and was able to get it compiled.
create or replace PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
IS
stmt        VARCHAR2 (9272);
V_EMPID     VARCHAR2 (100);
BEGIN
V_EMPID := EMPID;
stmt := 'select * from TEST123 where Empid is NOT NULL';
IF V_EMPID = '-1' THEN
    stmt := stmt || ' and Empid in (:1)';
ELSE
    stmt := stmt || ' and -1 = :1';
END IF;
OPEN rc FOR stmt USING V_EMPID;
END;If you pass in 1 as a parameter, it is going to execute because the statement that it is building is:
select * from TEST123 where Empid is NOT NULL and -1 = 1Although the syntax is valid -1 will never equal 1 so you will never get any data.
If you pass in 1,2 as a parameter then it is basically building the following:
select * from TEST123 where Empid is NOT NULL and -1 = 1,2This will cause an invalid number because it is trying to check where -1 = 1,2
You could always change your code to:
PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
IS
stmt        VARCHAR2 (9272);
V_EMPID     VARCHAR2 (100);
BEGIN
V_EMPID := EMPID;
stmt := 'select * from TEST123 where Empid is NOT NULL';
stmt := stmt || ' and Empid in (:1)';
OPEN rc FOR stmt USING V_EMPID;
END;and forget the if v_empid = '-1' check. If you pass in a 1 it will work, if you pass in 1,2 is will work, but don't pass them in with any tick marks.

HT1848 MY wife has an Iphone 4 and I have a 5. To date we haev used one apple is/account to manage music purchases. Recently we bought a Mac and created a new apple account for her. How do I synched her phone with new apple account?

MY wife has an Iphone 4 and I have a 5. To date we have used one apple account to manage music purchases/library. I updated ny phone to the new OS version and all her texting is showing up on my phone. I understand if i create an apple account for her I will not see her texts. Recently we bought a Mac and created a new apple account for her. How do I synched her phone with new apple account and get access to the music library under my account on the new MAC laptop before I update her phone to the new OS?
Going forward if I purchase music under my apple id and want her to have it on her device, how can I acheive that?

You can continue to share an Apple ID for purchases.
Sign her in to her new account here:
Settings > iCloud > Delete Account (Keep on Phone if you want to transfer contacts, calendars, etc...) then sign in with her new ID
Settings > Messages > Send & Receive > Apple ID > Sign out then in with new
Settings > FaceTime > Apple ID > Sign out then in with new
Use the same Apple ID here:
Settings > iTunes & App Stores > Apple ID

Q]DATA FNAME(60) VALUE 'myfile' . here do we create a new file or else?

Similar Messages

Maybe you are looking for