QA32 UD for Handling Units results in a transfer posting delivery?

In our environment we have Handling Units,  Serial Numbers and QM.  In the mateial master the QM inspection types are set to inspecting by HU.  The inspection lot gets created correctly and it references all the HUs.  When we perform a usage decision and transfer the HUs to unrestricted stock in QA32.  The system creates a transfer posting delivery that I then have to go and pick the HUs onto and then PGR the transfer posting delivery.   It seems to me that because QA32 is working with the HUs it should direclty post the stock to unrestricted.  I don't understand why I need this Transfer Posting Delivery.
Can anyone confirm that, yes indeed this is standard SAP behavior and we have to live with it  or Am I missing something and no the system can directly post an HU with serial numbers form 'Q' stock to unrestricted via QA32.
Thanks for your help,
Steve

Hi,
The Standard SAP process is as follows,
1. GR --> Inbound Delivery created and stock is in 902Q
2. QM processes
3. Take Usgae Decision --> Transfer Posting Delivery Created
4. Create TO and confirm TO with reference to step 3 Delviery (Sotck moved from 902Q to 922Q then 922 without Q to 902 without Q(Unrestrcited use)) (This TO Creation and confirmation can be automated)
5. Now create TO and confirm TO with reference to Step 1 Delivery (Stock moved from 902 without Q (unrestriced)) to the permanent storage (unrestricted use stock).
I hope this will help you.
Regards,
K.Annadurai.

Similar Messages

  • ALV Report for Handling Units

    Hi,
    In SAP, the standard report exists for the selection of handling units (HUMO). The requirement is that in addition to standard output the report should also display  for KMAT materials the serial number associated with the respective HU, catalog number and special stock category.
    -Depending upon the selection criterion, the HU assigned with the material will be identified for the materials.
    -The HU contains the catalog number in the contents field of status tab and will be displayed in output.
    -The serial number assigned with the HU will be picked up from the HU and will be displyed in the output.
    1. The program will first find out the HUs for the material. From the HU, catalog number and serial number will be traced.
    2.The output should be in ALV format.
    3.The output will display HU number, KMAT number, catalog number, serial number, quantity, special stock indicator, plant, Storage location, Warehouse number, and bin-location.
    Can Any body tell me what are the table involved in this ALV report to display HU number, KMAT number, Special Stock Indicator, Warehoure Number and Bin Location.
    Thanks,
    Bala.

    Hi ,
          For Handling unit tables are VEKP,VEPO also use object LE_HU in transaction SARA .
    For Warehouse number check out table t300,t320 or view v_T320
    For Bin location table T303,T303T or view V_T303
    For special stock determination T434P
    FOR KMAT - table MAST ,STKO ,STPO.
    Please reward if useful.

  • Extrernal Number Ranges for Handling Units in COWBPACK

    Dear Friends,
    I need to activate external number range for handling units in COWBPACK transaction.
    When I run COWBPACK, I don't get any field to enter Handling Unit Number.
    Can anybody suggest the way out.
    Regards,
    Harsh

    OK

  • Path for Handling Units

    Hi,
    Can you please give me the Path in SPRO to configure the number ranges for Handling Units?..................

    IMG > Logistics general > HU Management > Basics > technical basics ........

  • Configure for Handling units.

    hi
    Can anyone tell me the steps to configure for Handling units.
    thanks

    Dear Kumar
    Please go through this Building Block
    [Handling Unit Management|http://help.sap.com/bestpractices/BBLibrary/Documentation/G74_BB_ConfigGuide_EN_DE.doc]
    thanks
    G. Lakshmipathi

  • Output determination analysis for Handling Unit

    Hi Friends,
    Can any body help me on how to check the output determination analysis for  Handling unit outputs.
    I tried checking the document flow through delivery of the Handling unit but could not check.
    thank you for your help in advance.

    Hi,
    Try in t-code VL74 - Output from HU...
    enter ur selection parameters like Output Type,Transmission Medium,Sort order and Processing mode
    once you execute select the entries and click on Log (shift+F6) icon...
    Reg,
    JJ

  • Changing posting date at usage decision for handle units. How?

    Does anybody know how to change posting date at usage decision for handle units (HU)?
    If the material is not managed by HU, SAP allows this modification (there's a button with a hat on it referring the material document header).
    For HU I cannot seem to change posting date!
    Seba

    Yes it's possible! Well,...unless for versions 4.6C, 4.7 and ECC 5.
    I've found SAP Note #752131 by which SAP declares that you can create the pushbutton from the Screen Painter referring the document header.
    That's all,.....so simple, and it works fine!
    This note applies ONLY to version 4.6C, 4.7and ECC 5 (which is the version the customer I am with has installed).
    Thanks anyway.
    Sebas

  • Custom output type configuration for Handling units

    All, Can any one guide me how to configure AZ output types for handling units?  My scenario is as follows.
    To print a new label for the handling units as soon as the packing happens. User should be able to see this new custom output type in VLO2N/VL03N.  Also user can print the labels thru VL74 by inputting the custom output type and processing mode. 
    For this I did the following.
    Created a new custom output type in "NACE" under the application "V6 - Handling Units".  And assigned print program and smart form for this output types.  After this I am able to see the output types in VL74, when I did F4 on output type field.  But I am not able to see the new output type in VL02N/VL03N.
    Can anybody tell me what needs to be done to get the new output type in VL02N/VL03N.
    Thanks in advance.

    for Delivery , Application is V2.
    regards
    Prabhu

  • External Number Range for Handling Unit in COWBPACK Transaction

    Dear All,
    I need to activate external number range for handling units in COWBPACK transaction.
    i have tested but its not possible in standard SAP.
    i want to know any USEREXIT or BADI or BAPI for the same, so that we can use external number range for HU in COWBPACK.
    with regards
    Azeez.Mohd

    Hi,
         Thry this BADI
    BADI_HU_MAIN
    BADI_HU_SAVE
    Regards
    GK.

  • Serial numbers in Inbound delivery for Handling units

    Hello Experts,
    I have the following scenario:
    Purchase order + Inbound delivery + GR
    Inbound delivery is used because I need to create handling units, the materials included in these handling units are serialized and I am getting from the vendor an excel document with Handling unit number and the serial numbers included in each handling unit.
    So I would like to use this document to do the packing process in my inbound delivery instead of manually typing the serial numbers.
    What would be the best option to do this?
    I also need to do the same for MIGO when no HU are needed.
    Any Ideas??
    Thanks a lot in advance for your comments.

    Thanks a lot for your quick answer.
    I would like to avoid creating my own Z transaction, is there any point in packing process where I can include some enhancement to upload the serial numbers, I gues the HU and packing process can be done manually by the user.
    I was planning to enhance MIGO for the same process without handling units and I know that  there a tab can be added at item level. But I do not know where or how to do it while packing.
    Any suggestions?
    Thanks a lot for your time!

  • Automatic creation of TO's for Handling Unit Inbound Delivery -del type HID

    Hi Guru's,
    I would like to create the putaway TO's for a Handling Unit inbound delivery automatically (delivery type HID). This means at the moment of the creation of the Inbound Delivery. The packing is also automatically done by the customizing of the delivery type. Did somebody faced this requirement before?
    Thx,
    Carl

    I found the solution:
    Choose Customizing activity Define Output Types for Inbound Delivery, and define output type WMTA. Enter the following values in the detail view of output type WMTA under General Data:
    Enter an existing Access sequence. Access sequence 0001 is predefined in the standard system.
    Set the indicator Access to conditions.
    Set the indicator Partner-indep. output.
    Save your entries.
    In the menu tree, choose the entry Processing Routines in the Customizing activity Define Output Types, and enter the following values:
    Choose entry 8 (special function) for the indicator Transmission Medium.
    Enter RLAUTA20 in the field Program.
    Enter ENTRY in the field Form Routine.
    Save your entries.
    Choose the Customizing activity Maintain Output Determination Procedure.
    Define a procedure and enter the output type WMTA in the control view of the procedure. The procedure E10001 is predefined in the standard system.
    To define a suitable condition record for inbound deliveries,
    choose Logistics -> Materials Management -> Purchasing -> Master Data ->
    Messages -> Inbound Delivery -> Create from the SAP menu.
    Enter the output type WMTA.
    Enter output medium 8 (special function) for delivery type Inbound Delivery.
    Select the desired Date/Time.
    Select the desired Language.
    Cheers,
    Carl

  • Program code and transaction code  for handling unit detail

    Developed a SAP Script for the Handling unit details. Handling unit details is a document which has the details of materials, packaging materials and the level of packing. This Handling Units details will be issued to the customer at the time of delivery.

    Hi,
    Goto NACE transaction code , there you select the application area then  it will give you the list  of output types then select specific output click processing routines then you will see the program name and  script used.
    Or esle goto SPRO tcode then you can find the functional tab there also you can get the details.
    Thanks,
    Aditya

  • Condition Records for Handling Units

    Hi Experts,
    I want to add a new Key Combination into VV61 (Ship-to-party + Shipping Mat. Type) for a new Output Type.
    Please tell me how to do it.
    Thank you.
    Regards,
    David

    Hi,
    Goto IMG - Log General - Handling Unit Management - Output controls
    Explore in this config node for more info.
    Regards,
    Reazuddin MD

  • Enhancement for Handling units in VL60

    Hi,
    I have requirement to enhance the, Handling units information at the time of creation in Transaction VL60u2026 can any one please suggest me, how to approach for thatu2026 kindly provide useful BADIu2019s or Enhancements, where I can made the changes for HUu2019s
    Thanks,

    OK

  • Configuaration for handling Units and Packaging List

    Dear All,
    Kindly suggest me the configuration for the Handling units and packaging List.
    Regards

    Hi,
      Refer this  http://help.sap.com/printdocu/core/print46c/en/data/pdf/LOHU/LOHU.pdf
    Regards
    GK.

Maybe you are looking for

  • I can't find the download link for 10.10

    I have 10.6.8 on a 2010 iMac trying to upgrade to 10.10 but when go to the Apple site and choose "Upgrade Now" I don't get a link for the download. I have tried opening up the Mac App Store and get the same thing. The best I can find is a "get" tab u

  • Is there any way to drop it

    one user asking me this what have to do plz tell me gurus Is there a way that we can check if this custom index is being used by a program, a query, or a form? We want to know if we can drop it. More details about the custom index- The custom object

  • Count total records in 2 tables

    Hello, I am using this query select count(*) from table1, table2) to get the total number of records in those 2 tables. Actually I have only 7 records in both the tables, but I get 15. What could be the problem? Also I need to find out another query

  • SQL Tuning and OPTIMIZER - Execution Time with  " AND col .."

    Hi all, I get a question about SQL Tuning and OPTIMIZER. There are three samples with EXPLAIN PLAN and execution time. This "tw_pkg.getMaxAktion" is a PLSQL Package. 1.) Execution Time : 0.25 Second 2.) Execution Time : 0.59 Second 3.) Execution Time

  • Field s Name Requried to create Vendor

    Hi Guys, I need some fields  Name to create a Vendor  master record not with traction I need some flat file fields names  i know there is traction EK01, Ek02 , looking some one can give me some fields name. Regd's Vardesh.