Qry return same value for a particular column for each row but not all time

hi,
We recently migrated to Oracle Database 10.2.0.3.0 from 9i. We were using a sql to populate a table and it had been running fine. After migration the same sql is fetching / population incorrect values, but not everytime. If we run the same sql again it gives a correct result.
Ex:
insert into a1 ( col1, col2, col3 )
select a.field1, b.field2, c.field
from tab1 a, tab2 b, tab3 c
where a.field = b.field
and b.field (+) = c.field
something like this. Let us assume it fetches 200 rows
But sometimes the col1 has the same value for all the 200 rows and col2, col3 has correct values. If we run the same sql next time, the col1 fetches the correct value and everything is correct.
Could someone help on the above issue.

I know it's difficult but can you put together a small test case for us to reproduce this behaviour? Did you contact Oracle Support?
Any special constructs used behind the scenes? Virtual private database? Views?Materialized Views? Anything else?

Similar Messages

Will a sequence return same value for two different sessions?

Is there a possibility that a sequence will return same value to two different sessions when it is referred exactly at the same instance of time?

@Justin... Thanks for your insight; indeed, we too feel this shouldn't ever happen and never heard of it either, but there it is. (No, we haven't logged a TAR yet -- whatever that is -- partly because it didn't occur to us and partly because we only recently came across the issue and sensibly want to do some testing before we cry foul.)
However, the code is pretty straight-forward, much like this (inside a FOR EACH ROW trigger body):
SELECT <seqname>.NEXTVAL INTO <keyvar> FROM DUAL;
INSERT INTO <tblname> (<keyfield>, <... some other fields>)
VALUES(<keyvar>, <... some other values> );
(where <tblname> is NOT the table on which the trigger is fired). This is the only place where the sequence is ever accessed. The sequence state is way below its limits (either MAXVALUE or <keyfield>/<keyvar> datatype size).
In this setup, end users sometimes got an out-of-the-blue SQL error to the effect that uniqueness constraint has been violated -- as I said, we used to have a unique index on <keyfield> -- which leads us to assume that the sequence generated a duplicate key (only way for the constraint to be violated, AFAIK). We released the constraint and indeed, using a simple SELECT <keyfield>, COUNT(*) FROM <tblname> GROUP BY <keyfield> HAVING COUNT(*)>1 got us some results.
Unfortunately, the <tblname> table gets regularly purged by a consumer process so it's hard to trace; now we created a logger trigger, on <tblname> this time, which tracks cases of duplicate <keyfield> inserts... We'll see how it goes.
@Laurent... winks at the CYCLE thing Our sequence is (needless to say) declared as NOCYCLE and the datatype is large enough to hold MAXVALUE.

Where do I find the global package array g_fnn for a particular column?

Hi Everyone,
I found out from one of the tutorials that when a page is submitted, the value of a column is stored in a global package array.
Can you tell me where or how I can find out what nn in g_fnn would be for a particular column?
I was thinking maybe it corresponds to the position of the columns in the Report Column Attributes of the Report Attrutes page.
This information will help me refer to it in pl/sql code.
Thanks.
Emad

Hi Scott.
I think I may be able to answer my own question. Ooopps!
I noticed in the tutorial they refered to the deptno column as g_f09. I noticed in the Region Source under the Region Definition tab that a total of 9 columns were defined in the select statement.
Is this assumption correct by stating that if the Sal column is the 6th one defined in the select statement, it is g_f06 ?
Thanks.
Emad.

How to add a default value in a site column for every item in a document library

HI
i created a content type with some site columns ,
and included in a Document library.
Process ( content type)
-ProcessNo
-ProcessName
after that i uploaded 100 Documents but not added value in a site column process name.
now how i add a default value in a site column for every document in a document library
adil

HI
i get below error when i change the script
PS C:\scripts> C:\Scripts\updatedefaultvalue.ps1
Cannot index into a null array.
At C:\Scripts\updatedefaultvalue.ps1:8 char:7
+ IF($i[ <<<< "Title"] -eq $null)
+ CategoryInfo : InvalidOperation: (Title:String) [], RuntimeExce
ption
+ FullyQualifiedErrorId : NullArray
$web = Get-SPWeb http://tspmcwfe:89/
$list = $web.Lists["test"]
$item = $list.Items | Where { $_["Name"] -eq "Emc" }
foreach($i in $items)
IF($i["Title"] -eq $null)
$i["Title"] = "test"
$i.Update()
adil
Why are you piping a where in the items? Do you only want to add the "test" to ones matching
a name?
If you have ISE installed on your server I recommend you put your code in there and debug it.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

How to implement tooltip for the list items for the particular column in sharepoint 2013

Hi,
I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
Any help will be appreciated

We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

Filter for a Particular column in obiee 11g

Hi,
I have created an report having 10 measure columns and filter by month i.e., less than (particular month ) which is working perfect.Actually my requirement is to one column to be filter by equal to particular month. if is it possible kindly tell me how to do. thanks in advance!

Hi,
Goto Edit formula for that particular column.
and use FILTER(measure_column USING (condition)).
eg:
FILTER("XXXXX"."measure_column" USING ("OBIA"."D5.Times"."Month" =particular_month ))
Try this... This will work fine.

How can can i subtract the value of the column in each row ?

I want to subtract the value of the column in each row if the row is not enough then continue to next row.
For example
ID QTY
A 20
B 40
C 60
I want to update this table by subtract the value of the column (QTY) out 70 so the result i want will be
ID QTY
A 20 - 70 = -50 --> 0 this row will be updated to 0 and 50 will continue to next row
B 40 - 50 = -10 --> 0   this row will be updated to 0 and 10 will continue to next row
C 60 - 10 = 50 --> Stop loop
How can i write the sql query for this operation , Thanks

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. You have no idea,
do you? Temporal data should use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. What did you try on your own before posting? I will bet that you did nothing! You expect other people to do your job or homework for you.
>> I want to subtract the value of the column in each row if the row is not enough then continue to next row. <<
This makes no sense. Rows have no ordering; that is a spreadsheet. There is no such thing as a generic “id” in RDBMS. And an identifier is not a sequence which would have an ordering.
CREATE TABLE Foobar
(something_seq INTEGER NOT NULL PRIMARY KEY,
onhand_qty INTEGER NOT NULL);
Learn how to use the SUM()OVER() and LAG() aggregate functions, post what you tried for yourself and then we will help you.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Upload a file where no. of columns for each row is not fixed...

Hi All,,
I have to upload a file......
number of columns for each rows are not fixed ....
e.g.
Posting Date     Company Code     Currency     Header Text     Cost Center     Internal Order     Ref 1     Ref 2     Line Text     Account no.     Amount     Account no.     Amount     Account no.     Amount     Account no.     Amount     Account no.     Amount     Account no.     Amount     Account no.     Amount
31-05-09     1000     EUR     PAYROLL 05/2009     1234     123456     123456     seaman     RU     999999     9,999.99
31-08-09     1000     EUR     PAYROLL 05/2009     678     98765     98765     officer     GB     600015     4,560.00      600035     2,125.50      600020     1,325.40      600025     245.75      600030     300.00      280010     1,000.00      281091     6,000.00
its in tab delimited txt file.....
how to upload this type of file..
Plz suggest....
thnx
rahul

Hi,
Define your internal table like this.
     TYPES: BEGIN OF upload_type,
       upload(330),
       END OF upload_type.
DATA: itab_upload TYPE STANDARD TABLE OF upload_type,
       wa_upload TYPE upload_type.
Data: file type string.
file = 'C:/test.txt'.
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            filename                = file
            filetype                = 'ASC'
           HAS_FIELD_SEPARATOR = 'X'
       TABLES
            data_tab                = itab_upload
       EXCEPTIONS
            file_open_error         = 1
            file_read_error         = 2
            no_batch                = 3
            gui_refuse_filetransfer = 4
            invalid_type            = 5
            no_authority            = 6
            unknown_error           = 7
            bad_data_format         = 8
            header_not_allowed      = 9
            separator_not_allowed   = 10
            header_too_long         = 11
            unknown_dp_error        = 12
            access_denied           = 13
            dp_out_of_memory        = 14
            disk_full               = 15
            dp_timeout              = 16
            OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Use the sring operations to identify your coloumns.
Regards,
Satish

Can you check for data in one table or another but not both in one query?

I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
ACCOUNT
AccountID     Name
123               John Doe
124               Jane Donaldson
125               Harold Douglas
MARKETER_ACCOUNT
Key     AccountID     Marketer    StartDate     EndDate
1001     123               10526          8/3/2008     9/27/2009
1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
1023     124               10541          12/03/2010     12/31/4712
ARCHIVE
Key     AccountID     Marketer    StartDate     EndDate
1015     124               10526          8/3/2008     12/02/2010
1033     125               10987         01/01/2011     01/31/2012
So my query needs to return the following:
123     John Doe                        10526     8/3/2008     9/27/2009
124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
I'm unsure how to proceed in one query. Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
open CURSOR_ACCT
          select AccountID
          from
                 ACCOUNT A,
                 MARKETER_ACCOUNT M,
                 ARCHIVE R
           where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                where M2.AccountID = A.AccountID),
                                                  (select max(R.EndDate) from Archive R2
                                                where R2.AccountID = A.AccountID)
               and upper(A.Name) like parameter || '%'
<can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
(parameter could be "DO", so I return all names starting with DO...)

if I understand your description I would assume that for John Dow we would expect the second row from marketer_account ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
drop table account;
drop table marketer_account;
drop table marketer_account_archive;
create table account (
    id number
, name varchar2(20)
insert into account values (123, 'John Doe');
insert into account values (124, 'Jane Donaldson');
insert into account values (125, 'Harold Douglas');
create table marketer_account (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
create table marketer_account_archive (
    key number
, AccountId number
, MktKey number
, FromDt date
, ToDate date
insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
     , max(FromDt) over(partition by AccountId) max_FromDt
from marketer_account_archive;
with
basedata as (
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account
union all
select key, AccountId, MktKey, FromDt, ToDate
from marketer_account_archive
basedata_with_max_intervals as (
select key, AccountId, MktKey, FromDt, ToDate
     , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
from basedata
filtered_basedata as (
select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
select a.id
     , a.name
     , b.MktKey
     , b.FromDt
     , b.ToDate
from account a
join filtered_basedata b
    on (a.id = b.AccountId)
ID NAME                     MKTKEY FROMDT     TODATE
123 John Doe                  10987 28.09.2009 31.12.4712
124 Jane Donaldson            10541 03.12.2010 31.12.4712
125 Harold Douglas            10987 01.01.2011 31.01.2012
If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
Regards
Martin

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

I do not receive all my e-mailson all my devices. I seem to get them all on my iPhone 5s, but not all show up on my iPad and iMac. they are all set up the same. Any Ideas on what is going on and what I can do to remedy this? thanks

I have an iMac with OS X Lion 10.7.5,an iPhone 5s with iOS 7.1.2 and an iPad with iOS 7.1.2. all software is up to date. My problem is I do not receive all my e-mail on all 3 devices all the time. I seem to get them on my phone , but not all show up on my iMac or iPad. Any ideas as to what is going on and what can I do to resolve this issue? thanks

On the iPhone, go into Settings -> Store and turn off "Automatic Downloads" for Apps (and Music and Books, if you wish). You can also do that on the iPad to prevent it from going in the opposite direction.
That will stop any automatic downloading... to prevent them from coming over when using iTunes, select the phone (under Devices), Apps, and then uncheck "Automatically sync new apps." Again, do the same for the iPad if you wish.

Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ???

Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ??? Then sync them to mine? When I sign her phone into her account I get a message warning that if I sync the dogs on her phone will be replaced by the ones in the library! But as there are no songs there I'm reluctant to continue!!! Please help this non techi guy.!!!!!

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Firefox is failing to display many (but not all) images on websites that I visit, some images are shown and some are not even if they are in the same format.

I recently changed my ISP because I was having connectivity issues. In particular my router would shut down sporadically. As part of my attempt to clear issues I ran some spyware software which I've been told I could trust. Since then I have a problem viewing many websites as many (but not all) of the images are missing, even on websites that I know very well, including my own. What is very strange is that on one site every page has a jpg image under the navigation bar and all of these jpg's appear except one which doesn't appear even when I reload images. This problem also makes security sensitive sites like my bank site look very amateur which frightens me. The problem does not occur on other web browsers.

Which ''spyware software'' software did you run?
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

Qry return same value for a particular column for each row but not all time

Similar Messages

Maybe you are looking for