Quality issues in iDVD - is DVD Studio Pro the answer?

Hi all,
I am having a problem producing a high quality DVD with iDVD. I know this is the DVD studio forum but I am wondering if I need to switch form iDVD to get the results I want. So, this is what I am doing in iDVD.
I am using 13 QT (.mov) movie files that were made using the "Best" quality setting. Their size is 720 X 480. I am using the "Professional Quality" encoding in the Preference dialog and the Project settings dialog. The theme I am using is Revolution. (This is all in iDVD)
I have burned a few DVDs (Memorex DVD+RW, 4X) and at first used the "Best Performance" encoding. It took about 20 min to burn the DVD. The results were too pixelated. Then I read about the other settings, and used the "Professional Quality". This higher setting took over 40 min to burn the DVD. Unfortunately,the results were not that much better.
Can someone help me to figure out what is wrong? I am looking to produce the crisp quality I see when I view the QT movie files (before I incorporated them into my iDVD project).
What I am thinking is that iDVD is not capable of producing the high crisp quality I am looking for and that DVD Studio Pro might be my answer. Or, could it be my QT movie files (thou they look great when I just play them on my computer in the QT player.
Thanks
PS: I posted a similar topic in the iDVD forum but no answers as of yet and I am on a strict deadline (aren't we all...lol)

You didn't mention that you were doing screen captures. That makes a difference. Camtasia is compressing your screen captures. All DVDs use MPEG-2 compression. So you are in fact double compressing your videos (which always results is lower quality).
To get better results see if you can get Camtasia to record uncompressed, or using the Animation codec at Best. This will result in a absolutely huge file, which is what you want. You bring that into iDVD for good results. Or bring it into Compressor and then DVD SP for better results. Or a third party MPEG-2 encoder like BitVice and then DVD SP for best results. Of course using anything other than iDVD will require a couple of weeks training.

Similar Messages

  • Is there is a way to export the themes from iDVD to DVD Studio Pro?

    OK...so here's what I'm trying to find out: is there is a way to export the themes from iDVD to DVD Studio Pro? Or can I build the project in DVDSTPRO and import it to iDVD to build and burn?
    I've read several threads here and haven't come across my specific question. If I missed it, please copy me a link. Otherwise, I'd like to use the templates/themes in iDVD with my FCP project.
    I was thinking about importing the project from FCP to iDVD. Then, I thought about the markers etc....
    So, if anyone had an idea, tip or link, I'm all for it!
    Thanks!
    ron

    Importing iDVD Projects and Themes
    DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
    Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5. In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
    To import an iDVD project or archived project into DVD Studio Pro:
    1 Do one of the following:
    • Choose File > Open.
    • Press Command-O.
    2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
    DVD Studio Pro imports the iDVD project.
    About the iDVD Project Import
    When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
    The standard locations that DVD Studio Pro uses are (in this order):
    • iDVD project bundle: This is the file created when you save the project.
    • [user]/Library/iDVD/Favorites: This folder is located in your home folder.
    • [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
    • /Network/Library/iDVD/Favorites: This folder is on a network system specifically
    configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
    • iDVD application bundle: This is the iDVD application file that contains the default theme elements.
    Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations.
    If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
    Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
    Issues With Importing iDVD Projects
    There are some issues to be aware of when you import iDVD projects:
    • If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
    • When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
    • The button highlights used in iDVD may look different when imported into DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
    • When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
    • If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
    Source: +DVD Studio Pro User Manual+

  • Thoughts on BEST COMPRESSION for use with iDVD and DVD Studio Pro...

    Hi all...
    I'm having an issue with some visual artifacts that are present after burning a dvd using either idvd or dvd studio pro.
    My sequence containts footage (h.264) and photographs with titles. The photos (w/moves) look great, very crisp. So do the titles.
    However, the video looks awful. Pans and tilts creating streaking, so does any action with the frame.
    I don't see this streaking while viewing in the qt window or when previewing the dvd...
    I'm exporting as a qt reference using the dv/dvc pro setting, when I check the dvd on an ntsc monitor, the image is very streaky.
    Any ideas?
    Thanks,
    Mark

    Are you using FCP?? Then I see why you said QT reference movie... which is the best way. Being more descriptive about your setting when posting a question will return more helpful answers. (editing tool, source materials, machine spec...etc) You said that your footage was h264 and you posted your question in iMovie forum so I couldn't have guessed FCP and DV...
    If your sequence is DV on FCP I can't think of anything else but QT reference movie route. I don't understand why your video won't show interlacing in QT player or DVD preview, but perhaps they force deinterlacing for preview, who knows.
    You said your DVD looks 'very streaky' on ntsc tv. Is it to the point that it looks unnatural? Is overall motion jerky? If so, perhaps the field order had been messed with and changed. But I'm not quite sure about the exact nature of your problem. Visual problem in a subjective verbal description can be hard to communicate

  • IDVD and DVD Studio Pro

    Is there a way to import a theme from iDVD into DVD Studio Pro? I want to use a theme on iDVD called Revolution, but in iDVD it only has one drop zone for pictures. I have seen this theme used with multiple pictures so there has to be a way to do it. I was wondering if you can somehow get that template into DVD Studio Pro for more customization options.

    Importing iDVD Projects and Themes:
    DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
    Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5.
    In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
    To import an iDVD project or archived project into DVD Studio Pro:
    1 Do one of the following:
    • Choose File > Open.
    • Press Command-O.
    2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
    DVD Studio Pro imports the iDVD project.
    About the iDVD Project Import:
    When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
    The standard locations that DVD Studio Pro uses are (in this order):
    • iDVD project bundle: This is the file created when you save the project.
    • [user]/Library/iDVD/Favorites: This folder is located in your home folder.
    • [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
    • /Network/Library/iDVD/Favorites: This folder is on a network system specifically configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
    • iDVD application bundle: This is the iDVD application file that contains the default theme elements.
    Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations. If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
    Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
    Issues With Importing iDVD Projects:
    There are some issues to be aware of when you import iDVD projects:
    • If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
    • When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
    • The button highlights used in iDVD may look different when imported into
    DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
    • When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
    • If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
    Source: +DVD Studio Pro user manual.+

  • IDVD and DVD Studio Pro hang and crash since 10.5.6 update

    Seems like there are a lot of problems since this 10.5.6 update... I came here b/c of a prob with iDVD and DVD Studio Pro not working anymore. Was just trying to "Share/Export" an iMovie project to iDVD (and then tried again with DVD Studio Pro) and the program just hung and crashed and also wouldn't let me Restart or Shutdown very easily either. What gives?

    nmctech,
    Have you tried to reset the SMU/PRAM?
    http://support.apple.com/kb/HT1436?viewlocale=en_US
    Chris
    Message was edited by: 2point5

  • Compression quality: iDVD vs DVD Studio Pro vs others?

    I am merrily editing along in FCE, and looking to eventually compress and burn onto DVD. Since I can use all the quality I can get, and don't have spare money (so what else is new?), I am wondering about the differences in compressing software. Is there a visible difference in the final product using DVD Studio Pro vs iDVD? Is there something else out there that is better than iDVD but doesn't cost as much as DVDSP? Any opinions or experience welcomed!
    Thank you!

    If your project is under an hour, iDVD will give you very satisfactory results (use the Best Performance settings).
    You can create an up to 2 hour movie with iDVD but personally (with Best Quality), I think the quality begins to slide off a bit over an hour
    DVD Studio Pro, with Compressor, gives you many more compression options. Compressor has lots more compression pre-sets and you can go in and tweak bit rates, single or double passes, etc. You can do that inside DVD Studio Pro as well. Overall, Studio Pro just gives you a lot more options and control.
    Roxio Toast is a relatively cheap (around 80 bucks Cdn) piece of software that will compress your FC movies. You are way limited in terms of things like menus and chapters but compression wise it does a fairly nice job ... again, you don't have the versatility of iDVD. With Popcorn, it will allow you to cram a big movie onto a single layer DVD but the quality begins to hurt
    Personally, no matter what you use, two hours is the reasonable quality limit for a single layer DVD

  • Does iDVD and DVD Studio Pro use the same encoder?

    I have a video I shot in 1080p and it looks great on screen. When I use iDVD to make a quick playable DVD of it (as i have done with many other projects) I'm not happy with the results. It is only about 8 minutes long so there shouldn't be issues with extra compression to get it to fit on the disc.
    So I'm thinking of redoing it in DVD Studio Pro, but won't bother if they both use the same MPEG-2 encoding methods. Any thoughts?
    Thanks in advance,
    Mark

    Videodude, Compressor isn't necessary since iDVD will do the compression for you. But I wasn't happy with the standard def quality I was getting so Mish recommended using manual settings in Compressor and exporting the MPEG2 files needed to burn to DVD. Since Compressor created the files I used DVD Studio Pro to master my DVD.
    You should be able to burn a HD disc through iDVD if you have a BlueRay burner. But keep in mind that not everyone has BlueRay and the discs aren't cheap. Be a shame if you handed out discs that no one could use.
    As a side note, I used Mish's advice and am really happy with the quality of video I'm getting now. I can only guess that iDVD over compressed the video so it could squeeze two hours on a DVD, even though my video was only 10 min.
    Mark

  • IDVD vs DVD Studio Pro

    Please help! I've heard talk that it's better to burn DVDs using DVD Studio Pro than iDVD? Is that true?
    I'm asking because I worked on a project that was distributed to over 200 people. Out of those 200 discs, about 30 of them were returned because they skipped, restarted or just didn't play on some DVD players.
    I've gone back to the drawing board and made the following changes using iDVD before burning more copies of my project:
    1) Purchased Taiyo Yuden 8x discs
    2) Changed the burning speed to 1x
    3) Changed burning option from Pro Quality to Best Performance
    I've also heard that the reason High or Pro Quality isn't a good choice for burned discs to play on standard DVD players is because the Mac burns the disc at too high of a bitrate. Is this true? Either way, should I worry about iDVD not producing a good quality disc vs using DVD Studio Pro?
    Help!!!!

    hey there Luis,
    i doubt that iDVD was the problem since 85% of your DVDs worked. it could be that some of the players were to old to play they type of discs burned. some older DVD players may not like any flavor of recordable DVD, some just may not like DVD+R, preferring the older DVD-R standard. i've used iDVD since iLife 03 & had 3 that wouldn't work on customers players, but that got resolved with customers getting newer players made since 2003/2004. w/out knowing your individual customers DVD players, you may not not hit 100% compatibility.
    DVD SP is a much more complicated app than iDVD, but they essentially do the same thing-allow the user to author & burn movies & photo slide shows to recordable DVD media. DVD SP allows for more interactivity & more types of content to be applied in authoring a DVD, such as a game or web site-like "Harry Potter & Sorcerer's Stone" DVD, as such it is more difficult for novices. it has a pretty steep learning curve just like Apple's other Pro Apps & is only available w/ FCS1 or FCS2, also pretty expensive.

  • Getting Chapters from IDVD to DVD Studio Pro

    I have a video that must be paused after chapter segments by user and have found that I need to use DVD studio pro which I purchased today with no knowledge of how it works. Post just today explains that.
    I built an entire movie with transitions, audio and chapters iniDVD and Now I would like to get those chapter markers into DVD studio pro. Do i have to first export to Final Cut and then export to DVD Studio.
    I have made a quicktime movie that when viewed in Quicktime shows all the chapters(31 in all).
    Is there a better way to do this than manually find each time points and adding markers in dvd pro?
    Secondly, once i get those markers in DVD studio, can i create a pause and next function as one whole movie or do they need to be separate items(term).
    Thansk for any guidance.

    If you added Chapter Markers in Final Cut Pro, then you are all set. In FCP, Export a QuickTime Movie and when the dialog box opens make sure your Markers are set to "DVD Studio Pro Markers".
    If you added Chapter Markers in iDVD, then you are out of luck. You have to do it all over again. You could add Chapter Markers in DVD SP, but I recommend doing it in FCP.

  • Using themes from iDVD in DVD Studio Pro

    I have both Final Cut Pro Studio and I have iLife '08. I really like some of the new themes in iDVD '08. Is there a way I can use these themes, or are some of them available for DVD Studio Pro? Does the newest version of Final Cut Studio Pro enable this? It would be a good reason for me to buy the upgrade.
    Marsha

    You cannot open up iLife '08 iDVD projects any version of DVD SP. DVD SP does have some themes and you can try to get assets from iDVD projects to work with such as this to some degree
    http://dvdstepbystep.com/useelements.php
    There are many reasons I can give you to get the new Studio (not sure which one you have) but I really enjoy the new one. Opening iDVD is not one of the reasons though

  • DVD Studio Pro: The directory is not a DVD-Video directory...?

    DVD Studio Pro is saying "Note: The directory ‘/Users/viviennesmith/Desktop/FLIGHT_INSTRUCTOR DVD/PAR’ is not a DVD-Video directory and will not be included in the final disc or DLT."
    There are a are few other notes along the same theme!
    The entire log reads:
    Starting DVD Build THE_FLIGHT_INSTRUCTOR...
    Compiler Initializing...
    Precompiling Project THE_FLIGHT_INSTRUCTOR
    Compiling VMG Information...
    Created 6 PGCs in VTSM1
    Created 8 PGCs in VMG.
    0 Menu(s) will be created...
    Compiling Menu PGCs...
    Writing VTS_01_0.VOB
    Writing VIDEO_TS.VOB
    1 VTSs and 1 Titles will be created...
    Compiling VTS#1 (The Flight Instructor_SD-MPEG-2 6.2Mbps 2-pass)...
    Writing VTS_01_0.VOB
    Muxing VTS_01_1.VOB
    Done.
    Linking VMG...
    Linking VTS#1...
    Writing VTS#1...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    Note: The directory ‘/Users/viviennesmith/Desktop/FLIGHT_INSTRUCTOR DVD/PAR’ is not a DVD-Video directory and will not be included in the final disc or DLT.
    Note: The directory ‘/Users/viviennesmith/Desktop/FLIGHT_INSTRUCTOR DVD/The Flight Instructor.dspproj’ is not a DVD-Video directory and will not be included in the final disc or DLT.
    Note: The file ‘The Flight Instructor_SD-Dolby Digital Professional 2.0.ac3’ found in the ‘FLIGHT_INSTRUCTOR DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘The Flight Instructor_SD-MPEG-2 6.2Mbps 2-pass.m2v’ found in the ‘FLIGHT_INSTRUCTOR DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘The Flight Instructor_SD.mp4’ found in the ‘FLIGHT_INSTRUCTOR DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘THE_FLIGHT_INSTRUCTOR.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Start formatting
    Formatting as Standard DVD
    Simulation mode is off
    Lossless linking is on
    Number of layers is 1
    Doing side 1 of 1
    Playable in region 1,2,3,4,5,6,8
    Disc size is 12 cm
    Disc has no copyright material
    Writing ISO 9660 directories
    Writing UDF 1.02 structures
    Writing files
    The recording device reported the media error: Unknown device error. (0x73, 0x03.)
    How do I solve this to burn a simple dvd?! The mp4 file I want to burn is sitting in a folder on my desk top. I have made sure it's PAL. Does it need to be in the same folder as the edit project for example?!
    Cheers
    OnnySmith

    All the comments about files that are not of the DVD-Video are normal. Those are files that DVDSP creates and are simply ignored in the burning.
    The last line is the key one. It seems either your disc was bad or your recording device is having problems.
    Try with a another new disc.
    fwiw - certain brands were known to have issues. It's been a while since I've built a DVD but I remember always using Taiyo Yuden and had very few coasters from bad discs.
    x

  • Moving from iDVD to DVD Studio Pro...simple workflow question

    I have been using iDVD to burn DVDs and want to move to DVDSP. I have been told I have to encode to mpeg 2 since DVDSP does not encode in the background. I know these are simplistic questions and I really appreciate any help. So...I exported a QT ref file, took it to compressor to encode to mpeg 2 for DVD. Compressor spit out 1 movie file with no audio and three audio files. Now what? All the manuals talk about assets and buttons...I will teach myself that. I just need to know the proper workflow from FCP HD to DVD SP. Thanks for any and all help.
    Best,
    Thomas

    There are three ways to generate assets for use in DVDSP.
    1. Within FCP invoke: Export>Compressor, select your proper preset and encode.
    2. Within FCP invoke: Export Quicktime file>Current settings>self or non-self contained (it doesn't matter under normal circumstances). Open Compressor and import that file and select your proper preset and encode.
    3. Within FCP invoke: Export Quicktime file>Current settings>self or non-self contained (it doesn't matter under normal circumstances). Open DVDSP and import the file. DVDSP can encode files and uses the same engine as Compressor. The settings are buried deep in the program USER PREFERENCES. Once imported, DVDSP will create the necessary mpeg and ac3 files.
    My preferred process is #2. That way Compressor can do the work in background and I can go back to FCP.
    Regarding the audio and video files. You need the m2v file (video) and the AC3 file (audio). The aiff file is the same as the ac3 only much much larger.
    good luck.
    x

  • Sync Issues and Audio Drop-out from FCP to DVD Studio Pro

    I have edited a piece in FCP 5.1.4 and all audio/video is in perfect sync. I have been using this program for several years with no issues, until now. Upon exporting with compressor and importing into DVD Studio Pro, the audio is out of sync by 15 seconds and after that first 15 seconds there is simply NO audio, period.
    Any ideas? Please send the calvary...tight deadline and the hanging rope is getting shorter and shorter by the minute!
    Thanks

    Could be something got corrupted in DVD SP (preferences). I have had my audio act strangely and playback getting bogged down. Repairing permissions and deleting prefs works for this one for me. Did you do any recent upgrades to the OS or QuickTime?

  • IDVD Templates in DVD Studio Pro?

    Hey everyone! Just wondering if it's possible to import either a project or template from iDVD into DVD studio pro? Love DVD Studio Pro and would like to use the templates in iDVD in DVD Pro. Thanks...

    http://discussions.apple.com/thread.jspa?threadID=385969&tstart=0

  • Idvd & dvd studio pro disc not playing properly in other players

    Hi
    I have edited a program for the past 3 DAYS, and i have burned the program using IDVD, DVD studio pro, and Toast Titanium.
    It plays ok on my G5 and my laptop G4.
    And every lousy time i give the disc to the client something different goes wrong.
    If it's not a lockup,it's artifacts, and programs jumping forward and backwards between scenes, by itself.
    I'm using Memorex and Philips DVD discs.
    My Toshiba DVD appliance deck burns the program beautifully and no hiccups.
    But the customer wants the lovely menus that apple has designed
    Personally i am sick and tired of apple and all the "perfect world marketing" , i had yet to burn a DVD disc with idvd or dvd studio pro with any confidence.
    Apple should get into the " Bovine scatology " business, at least when that gets spread something grows despite the smell.
    Anyway, i don't know if anyone can help me or not .
    Any help would be appreciated.
    Thank you
    Vic.

    While I can understand your frustration, I believe the problem here is in the encoding settings. iDVD doesn't give you much control over specific encoding settings, whereas encoding through Compressor will.
    Some specific things are missing from your post. What is your workflow? How are you exporting your timeline? What format is your project (DV, HDV, DVCPRO, PAL, NTSC)? When you built your DVD in Studio Pro, what encoding settings did you use? Do you know where the encoding settings are? What are the settings for your DVD project (SD or HD)?
    You would do yourself and your client good to take some time to read over proper DVD mastering workflows. It's really quite painless once you understand how things work. Blaming Apple for this is not a very helpful way to solve your problem.
    The tutorial DVDs that came packaged with your install discs will also help. Just look at the lessons for DVD Studio Pro.
    Encoding settings for SD DVDs.

Maybe you are looking for