Quantum Client keeps changing to 480p Video!

So I have 3 Quantum clients in my home. On two of them the video keeps changing to 480p and only fitting the 4:3 letterbox size. I go to settings and it says 1080i or 1080p or 720p but it does not matter. The output stays at 480p. So to fix it I have to take out the HDMI from the TV and plug it in to a different input. Then it keeps the settings for a few days but then reverts back to 480p. One is hooked to a new Vizio TV and one is hooked to a new Samsung TV.
Any ideas out there?
Thanks in advance!

Other then to say I am not seeing it with my Samsung "e" series (2012-2013). Mine stays set at 1080P.
Is this happening on the VMS or on the IPC, or both.

Similar Messages

Intermittent video/audio freezes with Quantum Client

I upgraded to Quantum 2 weeks ago.   On my client, I am experiencing intermittent video/audio freezes that last about a second (rewind/replay is normal so it is not a problem with the source material).   I have experienced the problem with both live TV and recorded shows.   Sometimes we can watch an hour or more with no problems then there will be a cluster of 5 or more events, often within less then a minute of each other.   At first I though this was just an audio dropout, but now see it is a problem with both sound/audio -- no pixelation, no blackouts, just screen freezing or going very slow for a second or two.
At the suggestion of Verizon tech support, my connection to the client is all component and digital optical audio (I used to be HDMI for video, but because of my home theater needed to be digital optical for sound).
I have also noticed times where the response to the remote on both the client and server systems slows down with delays.   For example, when watching a show on the server, if I hit the quick (1 minute) rewind key -- I will see the server blink indicating it got the IR command, but nothing happens for 10 seconds or more. In fact, if I hit the key several times, it will queue up the commands and do a long rewind 10 - 30 seconds after the first remote keypress.
Is this a media server problem? On my latest call to tech support, they were suspecting a coax issue -- but rewiring my house is neither easy nor cheap.   Plus wouldn't a coax issue manifest problems all of the time as opposed to a quick series of problems in a 5 minute cluster an hour or so into a night's viewing.
I would prefer to keep Quantum; but I have not yet returned my original multi-room DVR setup (that worked fine) and need to determine if this can be fixed or should I just give up and return the Quantum boxes instead.
Any advice would be appreciated.
Solved!
Go to Solution.

I have actually had a very good experience with Verizon Technical Support. On my last call, tier 2 support did a remote test of my cable connections and detected a problem.   A technican was then scheduled to come to my house.   The technican addressed 4 problems.
1. The client boxes were sent to me without end-caps (signal terminators) for the coax out ports;
2. The 4 way spliter needed to be replaced (the original was provided by Verizon);
3.  The fiber box was not properly grounded; and
4. We moved the cable modem next to the splitter putting it closer to the other units and bypassing a 50' cable run that may or may not have had problems. -- Of course this last fix had me running cat5e cable to the office where the modem was, but so it goes.
Anyway, after those fixes, my droppout problem appears to have gone away.

Isight videos keeps changing color tone and temperature

When I try to record a movie with isight, the color temperature keeps changing and flashes from a warmer color to a cooler color. It never stays in one tone. Help!

kaynen430 wrote:
When I try to record a movie with isight, the color temperature keeps changing and flashes from a warmer color to a cooler color. It never stays in one tone. Help!
Welcome to Discussions, kaynen430
(0) The first thing to use on any iSight problem is http://support.apple.com/kb/HT2090
For system wide problems, the reset suggested there often restores proper iSight functioning.
If the problem is only with the _one app_ that you are now using to record video, reinstalling that app may help.
However, if your iSight's color keeps changing in all Apple apps and in all user accounts you test, you may have a system software issue. You can test whether software will correct your problem by trying the following:
(1) First, use Disk Utility to repair permissions. Then download and apply the COMBO update for the Mac OS version that you use. You do not show which OS X version you use, but you can find it in the list returned by this search:
http://support.apple.com/kb/index?page=search&product=&q=combo%20AND%20update
Repair permissions again IMMEDIATELY after the restart that finishes the installation.
Then test iSight again. (Repeat iSight Troubleshooting suggestions if necessary.)
(2) If properly applying the Combo Update does not resolve your problem, you may have problems within the basic OS X software.
To test that, reinstall your OS X, update to the latest OS X version you use by using the process in (1) above, and then check again for proper iSight function.
(3) If you need to post back for more suggestions, it will be helpful if you also post the following:
• OS X version (you may want to add this to your Profile in "My Settings" when logged in)
• Which app and version you originally posted about
• Whether your problem is EXACTLY the same in every app and user account you tested
• Which of the suggestions already offered you have used
• Anything new you learned while trying the suggestions above.
(4) We will watch for your status update and offer specific suggestions based on the details in your reply.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

DynamicStreamingResource use will keep changing video size

We are using OSMF videoplayer and DynamicStreamingResource. Each time the videobitrate change will trigger video size change. I need the video to stay fit on the whole screen. I tried adding size change to the stage but I am must be doing something wrong because I can't see the function for the resize event being called at all.
The video source is RMTP and streaming 5 different videobitrates.
Is there an example on how to handle the video size properly when the video bitrate changes using DynamicStreamingResource?
Thanks!
sey

Maybe try resetting the media element's layout metadata whenever the dynamic stream changes (event listener)?

Client list keeps changing or goes missing after quiting the ARD

I have group list based on different departments. Recently, the list of client would move around. I often have to fix the list but once I click out of the group list or quit ARD, the list of clients randomly changes or removes the clients from the list group.
Running ARD 3.7.2 on Mavericks X.9.2

To stop that, this is what you need to do: If you purchase apps directly on your phone, you MUST File>Transfer Purchases. The itunes content sync is ONE WAY, Computer to Phone. So, buy apps on your phone, File>transfer Purchases, they will automatically be checked to sync back to your phone as well as other apps in your library not on your phone. So, after you transfer, un-check what you don't want on your phone & then hit apply. From that point on everything will remain the way you have your apps arranged.

Colour values for text keep changing, how can I stop this?

Hi, I am using a bright blue/turquoise text against a dark purple background. For some reason with some of the text "clips" the values keep changing to something else after I click OK? Why is this and how do I stop it from doing it? It seems not to happen with other ones I have done, with same values on same sequence.

Sorry Tom, it's the most basic options; the "Text" video generator from the "Text" drop down menu in Effects, and then the "Colour Solid" video generator under "Matte" in Effects. I'm using DV-PAL at 25fps. To set the background solid colour, I originally colour picked from a logo supplied by client, and then noted down the values from the HSB sliders. I practically did the same with the text colour except I picked the colour from the colour wheel first and played with the sliders until it looked right on the background. I am using these colours for both "black screen" with text and for bottom corner third (style, not generator) name boxes. The difference between the two is that the name boxes have an opacity of 82% whereas the "black screen" versions have an opacity of 100%. Although there has been some change to the values of the background colour for the "black screen" versions (which I actually prefer), I am able to get these to stay uniformly now, the text however is at the original values for the original clips and then changes with the later ones I've done even though background values are ok. Whereas the values for the name boxes have changed with both the background and text on the last two. Sorry, hope that is enough detail but not too much : )

Imac 24-Why does my airport signal keep changing??

my airport signal keeps changing??
right next to my imac i have my powerbook 17
and it's signal is full...where my IMac signal is not??
signal on my imac is 2 bars from full most of the time!!
is this a IMAC thing or what??

No real help but this is a common problem for c2d machines it seems. They have the new "n" protocol wireless card in which willl be faster and further than the g with the new apple extreme base station. It will also be very good for streaming video (iTV). This is just consolation for an iffy wireless link. These boards have many threads on this topic (eg macbook pro area). Do a search any you will find the others with the problem and maybe a solution.
Cheers

Service settings keep changing?????

I have digital voice and someone keeps changing my settings on the services I have. Is this your programmers or someone who is making changes?
Example: I have simultaneous ring turned on for my home office line and somehow it keeps getting turned off without me logging in.
Please fix this or I will have to seek better service.

If you have invested a lot of money into your computer system etc, I suggest that you take it to a dealer like Comp USA, Best Buy, C.City etc. It’s possible that you have many issues affecting your computer operation.
To my knowledge there are no known issues with Itunes that causes the problem's you mention!
I don’t think this is the best forum or Itunes catagory to resolve what could be complex computer problems.
That’s why when you purchase the computer you should have a warranty and or Technical Support included for issues you may have.
The reason I mention Virus is because you have to start somewhere, and with the little info you gave out, that’s where I thought you should start.
To Contact Apple Tech-Support call – 1800-275-2273. Good Luck!!!
Compaq PC / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

Multicast IP address keep changing on music on hold

Hi
I am trying to set up multicast for music on hold on the cucm 9.
on the cucm, I enable multicast audio sources on MOH server, using base IP 239.1.1.1, and set increment multicast on " ip address"
however the multicast IP address keep changing, sometimes its 239.1.1.1, then after a while it suddenly change to 239.1.1.2 etc..
here is the config on our srst router ( which specify the multicast ip is 239.1.1.1):
is there any way that the multicast ip do not keep changing as its affecting the MOH at the moment.
" config for MOH"
telephony-service
video
srst mode auto-provision none
srst dn template 1
srst dn line-mode dual
max-ephones 265
max-dn 600
ip source-address 10.190.0.1 port 2000
timeouts interdigit 5
system message "GlobalDial Unavailable"
cnf-file location flash:
time-zone 48
date-format dd-mm-yy
voicemail 080758831#
max-conferences 8 gain -6
moh "xmas_jazz.wav"
multicast moh 239.1.1.1 port 16384 route 192.168.1.1
transfer-system full-consult
transfer-pattern 0.T
secondary-dialtone 0
create cnf-files version-stamp 7960 Nov 27 2013 18:23:59
I was thinking to put a few more multicast IP,. but it only allow you to put one ( while the cucm set the IP address as increment)
OC-MHO-VG-SRST(config)#telephony-service
OC-MHO-VG-SRST(config-telephony)#multi
OC-MHO-VG-SRST(config-telephony)#multicast ?
moh Set IP multicast address for use with music-on-hold from flash
OC-MHO-VG-SRST(config-telephony)#multicast moh ?
A.B.C.D Define music-on-hold IP multicast address from flash
OC-MHO-VG-SRST(config-telephony)#multicast moh 239.1.1.2 ?
port Define media port for multicast moh
OC-MHO-VG-SRST(config-telephony)#multicast moh 239.1.1.2

Hi Rachel,
If the Increment Multicast on radio button is set to IP address, each MOH audio source and codec combination is multicast to different IP addresses but uses the same port number. If it is set to Port Number, each MOH audio source and codec combination is multicast to the same IP address but uses different destination port numbers.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_appendix_b_.html#50022
HTH
Manish

Ipod touch keeps changing new album artwork

Ive been trying to figure out why my ipod touch keeps changing my new album/songs artwork and i cant figure it out. I deleted the artwork then readded it and it didnt work. Deleted the itunes cache and that didnt work. Im so close to saying for it get it. Any suggestions?

That happens sometimes
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Youtube quality keeps changing until crash.

Hi, I looked online for any solutions to this problem but I cant find anything.
When I go to a youtube video. Lets say youtube homepage, first random video. The video will play for a split second, then change quality, then change and change and keep changing until it eventually goes up to the highest quality and then crashes or sometimes (very rarely) it plays at 1080. When it crashes i get the "An error occurred, please try again later". I have the box ticked "never play in high quality" but makes no difference. As soon as it starts to cycle through the quality I cannot stop it. Only happens on firefox, IE and Chrome are fine. I have tried clearing cookies. I have tried a fresh install of Firefox, I have no addons running. I have tried signing out of Youtube. I installed realplayer. I even tried starting in safe mode. Nothing I do seems to make a difference

I had this exact same problem, and fixed it by changing youtube to HTML5.
You can do this by following [http://www.youtube.com/html5 this link]

MSI VOX Audio default settings keep changing on startup

I've had this VOX tuner for about a year and a half and I've used it on 2000, XP SP1, SP2, etc...and I've fought with it every single time I reconfigure the O/S. I am a computer support professional - I know a couple of things about drivers, registry file, etc...and I STILL can't get this thing to work consistently!
Anyway, when I install the drivers and MSIPVS software, it always selects the MIDI synth input instead of Line In as the default audio input setting. I reconfigure MSIPVS and tell it to use Line In instead - everything works fine. Then I exit and restart MSIPVS - it goes back to MIDI and I have to reconfigure the audio to use Line In every single time I run the software. Of course, that means the recording doesn't work - because as soon as I click on record, it sets the audio default back to MIDI synth again. I've used two different audio cards with this and they all do the same thing (SoundBlaster Live! value and a SoundBlaster Audigy 2). I've used several different motherboards - I've completely replaced all components in my computer several times and I always have this same problem.
I've got an internal MSI TV tuner card on another machine running this same software - it has the same problem. It won't exit half the time (the window closes but you can still hear the audio running until you restart the computer).
The hardware seems fine, but the software is unbearably poor! I'd drop the software in a second if I could find something else that works better.
The weird thing is that in uninstalling, reinstalling, cleaning out the registry, fiddling endlessly -once in a while I can actually get it to work, but I have no idea what I've done to make this work twice in a row. I've reinstalled the software dozens of times now, reinstalled Windows...I don't know what else to try.
Obviously, I've upgraded all audio and video drivers - none of that makes any difference.
If I open the SoundBlaster mixer program, as I start the MSIPVS program, I can see the MIDI and Line In channels get muted and un-muted but by the time the software loads, it's defaulted back to MIDI Synth again.
Anybody have ANY ideas? I'm desperate to try anythig now. I'm considering throwing the whole thing out and getting an ATI tuner or something completely different - as long as it doesn't use this Intervideo software...
Thanks.
Oh yeah...one more thing I've noticed is that the WinCinema Manager causes all kinds of problems - if this program is running, the channel keeps changing to 1, 11, or 111 - it seems to be sending some kind of remote control signals to change the channels so I've had to disable this program - then the channels seem to work fine (but maybe it's causing my audio problems...?)

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Also check Smart Connect if you have any event enabled that can change settings.
When it comes to the keyboard, in some cases, the keyboard can be changed back to the default keyboard when you update the selected keyboard app from Google Play.
What are your thoughts about this forum? Let us know by doing this short survey.

My media folder keeps changing from my external HDD back to my cpu. How do I keep it on the external HDD?

itunes keeps changing my media folder from my external hdd back to the cpu's hdd. I want to permanently change it to the external hdd. A while back, I didn't have this problem. Any suggestions?

You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
iOS: Importing personal photos and videos from iOS devices to your computer

Status keeps changing from invisible to online: why the issue is ignored?

There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on ‎16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...

Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards

An image changing to FLV Video Player in AJAX Update Panel

Hi,
I'm trying to design part of a website can seen as video gallery. I have videos related to subcategories; and subcategories that related to categories.
I was using popups but now want to change it. Simply, firstly there are images and descriptions(in an update panel) of videos on page. After clicking thumbnail, the region includes thumbnail and description wil be changed to FLV video player.
Outside of updatepanel player is working good. but when i move it into updatepanel; doesn't working in IE. Because JS code (AC_FL_RunContent(.....)) is not working in updatepanel. Tried another script (like alert('hello!');), it's working. I think i have problem with the function named AC_FL_RunContent(...). It's working as i want, if open page with Firefox.
Looked for this in google. Visited many pages, but never find a solution for this nor source of problem. I hope someone can help me
Using ASP.Net. I'm attaching my tree structure and codes below:
Default.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default"%>
<!
DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" //www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<
html xmlns ="http://www.w3.org/1999/xhtml">
<
head id="Head1" runat="server">
<title>Untitled Page</title>
<link href="StyleSheet.css" rel="stylesheet" type="text/css"/>
<script type ="text/javascript">
function
MM_CheckFlashVersion(reqVerStr,msg){
with (navigator){
      var isIE = (appVersion.indexOf("MSIE") != -1 && userAgent.indexOf("Opera") == -1);
      var isWin = (appVersion.toLowerCase().indexOf("win") != -1);
      if (!isIE || !isWin){
        var flashVer = -1;
        if (plugins && plugins.length > 0){
            var desc = plugins["Shockwave Flash"] ? plugins["Shockwave Flash"].description : "";
            desc = plugins["Shockwave Flash 2.0"] ? plugins["Shockwave Flash 2.0"].description : desc;
            if (desc == "") flashVer = -1;
            else{
              var descArr = desc.split(" ");
              var tempArrMajor = descArr[2].split(".");
              var verMajor = tempArrMajor[0];
              var tempArrMinor = (descArr[3] != "") ? descArr[3].split("r") : descArr[4].split("r");
              var verMinor = (tempArrMinor[1] > 0) ? tempArrMinor[1] : 0;
              flashVer = parseFloat(verMajor + "." + verMinor);
        // WebTV has Flash Player 4 or lower -- too low for video
        else if (userAgent.toLowerCase().indexOf("webtv") != -1) flashVer = 4.0;
        var verArr = reqVerStr.split(",");
        var reqVer = parseFloat(verArr[0] + "." + verArr[2]);
        if (flashVer < reqVer){
            if(confirm(msg))
              window.location = http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash;
function callFLVP(){
AC_FL_RunContent('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0','width','320','height','240','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=./VideoGallery/serpende&autoPlay= false&autoRewind=false','quality','high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','FLVPlayer_Progressive');
</
script>
<
script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
</
head>
<body onload="MM_CheckFlashVersion('7,0,0,0','Content on this page requires a newer version of Adobe Flash Player. Do you want to download it now?');">
<form id="form1" runat="server">
      <ajaxToolkit:ToolkitScriptManager ID="ScriptManager1" runat="server" />
      <div>
        <asp:UpdatePanel ID="UpdatePanel1" runat="server">
        <ContentTemplate>
            <asp:Literal ID="thumbLiteral" runat="server"></asp:Literal>
        </ContentTemplate>
        <Triggers>
            <asp:AsyncPostBackTrigger ControlID="showvideoButton" EventName="Click" />
        </Triggers>
        </asp:UpdatePanel>
        <asp:Button ID="showvideoButton" Text="Video" runat="server" onclick="showButton_Click"/>
     </div>
   </form>
</
body>
</
html>
Default.aspx.cs
public partial class _Default : System.Web.UI.Page
     protected void Page_Load(object sender, EventArgs e)
          thumbLiteral.Text = "<img src id=\"imgThumb\" src=\"./VideoGallery/small/serpende.jpg\" />";
     protected void showButton_Click(object sender, EventArgs e)
          string strNoScriptBlock = "";
          strNoScriptBlock += "<noscript>";
          strNoScriptBlock += "<object classid=\"clsid:D27CDB6E-AE6D-11cf-96B8-444553540000\" codebase=\"http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0\" width=\"320\" height=\"240\" id=\"Object1\"><param name=\"movie\" value=\"FLVPlayer_Progressive.swf\" /><param name=\"salign\" value=\"lt\" /><param name=\"quality\" value=\"high\" /><param name=\"scale\" value=\"noscale\" /><param name=\"FlashVars\" value=\"&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=serpende&autoPlay=false&a utoRewind=false\" /><embed src=\"FLVPlayer_Progressive.swf\" flashvars=\"&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=serpende&autoPlay=fal se&autoRewind=false\" quality=\"high\" scale=\"noscale\" width=\"320\" height=\"240\" name=\"FLVPlayer\" salign=\"LT\" type=\"application/x-shockwave-flash\" pluginspage=\"http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash\" /></object>";
     strNoScriptBlock += "</noscript>";
     string strScriptBlock = "";
     strScriptBlock += "<script>";
     strScriptBlock += "callFLVP();";
     strScriptBlock += "</script>";
     ScriptManager.RegisterClientScriptBlock(this, typeof(string), "strScriptBlock", strScriptBlock, false);
     thumbLiteral.Text = strNoScriptBlock;

Let's check this first;
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

Quantum Client keeps changing to 480p Video!

Similar Messages

Maybe you are looking for