Query behavior when removing characteristic

Hi Gurus,
in my query I have about for example ten characteristics.
I want for one key figure only to display the last value of the month, for example the turn over.
It works so far when the query is opened all characteristics are displayed and the last value for turn over is displayed.
When removing characteristics one by one, for example at the sixth characteristic, suddenly there is a summation for turn over.
Any idea what the reason could be?
I want for this key figure always the last value for all characteristics.
Thanks in advance for any suggestions!

AL1112 wrote:
Hi,
>
> I think you are using calaculate single value as last value option to display the value for turnover.
>
> Instead of that make use of exception aggregation and choose reference characterstic as on which you are getting the unique combination of value.
>
> For better understanding please paste the sample output of the report.
>
> Hope it helps.
>
> Regards,
> AL
Is it enough to make the exception aggregation on only one reference characteristic, in my case 0calmonth (I want the last value for turn over for the last month)?
I have a restricted key figure turn over (standard aggregation).
On this restricted key figure a formula with exception aggregation last value and reference characteristic 0calmonth.
When all characteristics are displayed the values are correct.
When characteristic 0calmonth is removed the values are also correct for all other remaining characteristics.
That means that the last value for those characteristics is shown correct.
That means for example characteristics Sales Divison (0Division) and Profit Center (0PROFIT_CTR) are showing the correct drill down (for each Profit Center which is
available).
For example:
Sales Division - PCTR - Month - Turnover
35 10 Sep2011 6160000EUR
35 10 Oct2011 6160000EUR
35 10 Nov2011 6160000EUR
35 20 Sep2011 6160000EUR
35 20 Oct2011 6160000EUR
35 20 Nov2011 6160000EUR
Removing 0Calmonth:
Sales Division - PCTR - Turnover
35 10 6160000EUR
35 20 6160000EUR
Removing Profit Center:
Sales Division - Turnover
35 12320000EUR
It seems that removing the Profit Center characteristic makes the sum with PCTR 10 and 20 for Sales Division 35.
But how can it be made that here also the last value 6160000EUR appear?

Similar Messages

Strange query behavior when displayed in browser.

Hi gurus,
when I open a query in browser on one of the computers, I get no detailed cells, just the overall result.
No matter, if I open the query in Portal, or in BEx Web Analyzer.
When I use BEx Analyzer, everything seems to be fine.
When I open the same query, on the same user, but on another computer, queries are displayed properly.
Do you know what might cause the problem? Maybe some browser settings?
Regards,
Dorota

Thanks, we recently installed a new GUI version on this computer, so probably you're right

CrystalRpts - Excel Data source, SQLServer2005 table. SQL Query behavior?

Greetings - What should be a simple report (with Excel 2007 spreadsheet as primary data source linking to a SQLServer 2005 table ) returns incorrect results. Query designed to select data from SQL Table with 'DATES >=' certain date, but data returned ignores the DATE qualifier.
Running DATE query manually against the SQL Table proves the data is correct.
Anyone notice problems with SQL Query behavior when mixing data sources? Thanks.

Hello,
Take the SQL that works outside of CR and then create a new report and add all data sources. Now use a Command Object and paste in your SQL. YOu may have to play with adding each data source in a different order. If that works great if not you'll have to figure out a way to get all the data into one source.
I believe MS SQL Server can link multiple data sources and types. Check SQL Help file for more info it it is possible.
Thank you
Don

Supress warning message in Query Analyzer after free characteristic removed

Hi
I have a query and several workbooks looking to the same query.
When I remove a free characteristic from the query (not the cube) I am presented with a warning message when opening Analyzer indicating that the removed field is no longer available on the report.
Is there any way to supress these warning messages? I am aware of the option Settings > Supress warnings from server but I would not want to ask every people to do this in the company. Is there a way I can supress the warning from the query?
We are running 3.x for this particular query and report.
Thanks

Hi,
In RSRT, you have an option for the suppressing the messages.
Have a look on the below link -
http://wiki.sdn.sap.com/wiki/display/BI/SuppressquerymessagesusingRSRT
Regards,
Geeta

Strange behavior when performing query

Hi all,
I'm getting some odd behavior when doing different kinds of queries and am hoping someone here can help out. I have a database with continuously updated PDML data (http://www.nbee.org/doku.php?id=netpdl:pdml_specification). I am opening anf querying the database from a seperate application. This appears to work fine for certain types of queries, and fails for other types with error messages that don't seem relevant. Specifically, some queries that use the attribute axis as the last leaf seem to get fouled up. Here are some example queries and the results I get:
First some queries that work:
Query: "string(collection()[1]/packet[1]/proto[1]/field[1]/@size)"
Result:
A valid number
Query: "collection()//proto[@name='geninfo']/field[@name='len']"
Result:
<field name="len" pos="0" show="64" showname="Packet Length" value="40" size="64"/>
<field name="len" pos="0" show="64" showname="Packet Length" value="40" size="64"/>
<field name="len" pos="0" show="64" showname="Packet Length" value="40" size="64"/>
Now some queries that don't work:
Query: "collection()//packet/proto/field/@size"
Result:
Output to stdout - "Transaction specified for a non-transactional database"
and an Exception with message - "Error: Invalid argument"
Query: "collection()//proto[@name='geninfo']/field[@name='len']/@name" (notice it's almost identical to above working query except with @name)
Result:
Same as above, an stdout about transactions and an exception about invalid arguments
What I find most interesting is that both errors (the one printed to stdout and the one I get in my exception) don't seem to have anything to do with the problem. I know the transactional stuff isn't messed up because the exact same code works for certain queries. I'm not sure about the "Error: Invalid argument" exception, but it's not very helpful by itself. I'm using the Java library and DBXML version 2.4.16. Anyone have any ideas what's going on?
Thanks,
Dave

As a follow-up, it appears that I just needed to wrap my attributes in the XPath string() function. For example "collection()//packet/proto/field/@size" does not work while "collection()//packet/proto/field/string(@size)" works fine.
I'm still not sure why it's spitting out an error message to stdout about transactions not being enabled when the only real error is with the query, but at least it's working now.

SharePoint 2010 Slow query duration when setting metadata on folder

I'm getting "Slow Query Duration" when I programmatically set a default value for a default field to apply to documents at a specified location on a SP 2010 library.
It has nothing to do with performance most probably as I'm getting this working with a folder within a library with only a 1 document on a UAT environment. Front-end: AMD Opteron 6174 2.20GHz x 2 + 8gb RAM, Back-end: AMD Opteron 6174 2.20GHz x 2 + 16gb
RAM.
The specific line of code causing this is:
folderMetadata.SetFieldDefault(createdFolder, fieldData.Field.InternalName, thisFieldTextValue);
What SP says:
02/17/2014 16:29:03.24 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql. This can result in blocking in sql and excessive memory use on the front end. Verify that no binary parameters are
being passed as literals, and consider breaking up batches into smaller components. If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields.
02/17/2014 16:29:03.24 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa43 High Slow Query Duration: 254.705556153086
02/17/2014 16:29:03.26 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed: at Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command, SqlQueryData monitoringData) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) at Microsoft.SharePoint.Library.SPRequestInternalClass.PutFile(String
bstrUrl, String bstrWebRelativeUrl, Object punkFile, Int32 cbFile, Object punkFFM, PutFileOpt PutFileOpt, String bstrCreatedBy, String bstrModifiedBy, Int32 iCreatedByID, Int32 iModifiedByID, Object varTimeCreated, Object varTimeLastModified, Obje...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...ct varProperties, String bstrCheckinComment, Byte partitionToCheck, Int64 fragmentIdToCheck, String bstrCsvPartitionsToDelete, String bstrLockIdMatch, String bstEtagToMatch,
Int32 lockType, String lockId, Int32 minutes, Int32 fRefreshLock, Int32 bValidateReqFields, Guid gNewDocId, UInt32& pdwVirusCheckStatus, String& pVirusCheckMessage, String& pEtagReturn, Byte& piLevel, Int32& pbIgnoredReqProps) at Microsoft.SharePoint.Library.SPRequest.PutFile(String
bstrUrl, String bstrWebRelativeUrl, Object punkFile, Int32 cbFile, Object punkFFM, PutFileOpt PutFileOpt, String bstrCreatedBy, String bstrModifiedBy, Int32 iCreatedByID, Int32 iModifiedByID, Object varTimeCreated, Object varTimeLastModified, Object varProperties,
String bstrCheckinComment, Byte partitionToCheck, Int64 fragmentIdToCheck...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ..., String bstrCsvPartitionsToDelete, String bstrLockIdMatch, String bstEtagToMatch, Int32 lockType, String lockId, Int32 minutes, Int32 fRefreshLock, Int32 bValidateReqFields,
Guid gNewDocId, UInt32& pdwVirusCheckStatus, String& pVirusCheckMessage, String& pEtagReturn, Byte& piLevel, Int32& pbIgnoredReqProps) at Microsoft.SharePoint.SPFile.SaveBinaryStreamInternal(Stream file, String checkInComment, Boolean checkRequiredFields,
Boolean autoCheckoutOnInvalidData, Boolean bIsMigrate, Boolean bIsPublish, Boolean bForceCreateVersion, String lockIdMatch, SPUser modifiedBy, DateTime timeLastModified, Object varProperties, SPFileFragmentPartition partitionToCheck, SPFileFragmentId fragmentIdToCheck,
SPFileFragmentPartition[] partitionsToDelete, Stream formatMetadata, String etagToMatch, Boolea...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...n bSyncUpdate, SPLockType lockType, String lockId, TimeSpan lockTimeout, Boolean refreshLock, Boolean requireWebFilePermissions, Boolean failIfRequiredCheckout, Boolean
validateReqFields, Guid newDocId, SPVirusCheckStatus& virusCheckStatus, String& virusCheckMessage, String& etagReturn, Boolean& ignoredRequiredProps) at Microsoft.SharePoint.SPFile.SaveBinary(Stream file, Boolean checkRequiredFields, Boolean
createVersion, String etagMatch, String lockIdMatch, Stream fileFormatMetaInfo, Boolean requireWebFilePermissions, String& etagNew) at Microsoft.SharePoint.SPFile.SaveBinary(Byte[] file) at Microsoft.Office.DocumentManagement.MetadataDefaults.Update()
at TWINSWCFAPI.LibraryManager.CreatePathFromFolderCollection(String fullPathUrl, SPListItem item, SPWeb web, Dictionary2...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ... folderToCreate, Boolean setDefaultValues, Boolean mainFolder) at TWINSWCFAPI.LibraryManager.CreatePathFromFolderCollection(String fullPathUrl, List1 resultDataList,
SPListItem item, SPWeb web, Boolean setDefaultValues, Boolean mainFolder) at TWINSWCFAPI.LibraryManager.CreateExtraFolders(List1
pathResultDataList, List1 resultDataList, String fullPathUrl, SPWeb web, SPListItem item, Boolean setDefaultValues) at TWINSWCFAPI.LibraryManager.CreateFolders(SPWeb web, List1
pathResultDataList, SPListItem item, String path, Boolean setDefaultValues) at TWINSWCFAPI.LibraryManager.MoveFileAfterMetaChange(SPListItem item) at TWINSWCFAPI.DocMetadataChangeEventReceiver.DocMetadataChangeEventReceiver.FileDocument(SPWeb web, SPListItem
listItem) at TWINSWCFAPI.DocMetadataChang...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...eEventReceiver.DocMetadataChangeEventReceiver.ItemCheckedIn(SPItemEventProperties properties) at Microsoft.SharePoint.SPEventManager.RunItemEventReceiver(SPItemEventReceiver
receiver, SPUserCodeInfo userCodeInfo, SPItemEventProperties properties, SPEventContext context, String receiverData) at Microsoft.SharePoint.SPEventManager.RunItemEventReceiverHelper(Object receiver, SPUserCodeInfo userCodeInfo, Object properties, SPEventContext
context, String receiverData) at Microsoft.SharePoint.SPEventManager.<>c__DisplayClassc1.b__6() at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param) at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](SPUserToken
userToken, Gu...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...id tranLockerId, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel) at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](Byte[]
userTokenBytes, Guid tranLockerId, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel) at Microsoft.SharePoint.SPEventManager.HandleEventCallback[ReceiverType,PropertiesType](Object callbackData) at Microsoft.SharePoint.Utilities.SPThreadPool.WaitCallbackWrapper(Object
state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext
execu...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...tionContext, ContextCallback callback, Object state) at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
02/17/2014 16:29:03.26 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzku High ConnectionString: 'Data Source=PFC-SQLUAT-202;Initial Catalog=TWINSDMS_LondonDivision_Content;Integrated Security=True;Enlist=False;Asynchronous Processing=False;Connect
Timeout=15' ConnectionState: Open ConnectionTimeout: 15
02/17/2014 16:29:03.26 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High SqlCommand: 'DECLARE @@iRet int;BEGIN TRAN EXEC @@iRet = proc_WriteChunkToAllDocStreams @wssp0, @wssp1, @wssp2, @wssp3, @wssp4, @wssp5, @wssp6;IF @@iRet <> 0 GOTO
done; DECLARE @@S uniqueidentifier; DECLARE @@W uniqueidentifier; DECLARE @@DocId uniqueidentifier; DECLARE @@DoclibRowId int; DECLARE @@Level tinyint; DECLARE @@DocUIVersion int;DECLARE @@IsCurrentVersion bit; DECLARE @DN nvarchar(256); DECLARE @LN nvarchar(128);
DECLARE @FU nvarchar(260); SET @DN=@wssp7;SET @@iRet=0; ;SET @LN=@wssp8;SET @FU=@wssp9;SET @@S=@wssp10;SET @@W=@wssp11;SET @@DocUIVersion = 512;IF @@iRet <> 0 GOTO done; ;SET @@Level =@wssp12; EXEC @@iRet = proc_UpdateDocument @@S, @@W, @DN, @LN, @wssp13,
@wssp14, @wssp15, @wssp16, @wssp17, @wssp18, @wssp19, @wssp20, @wssp21, @wssp22, @wssp23, @wssp24, @wssp25, @wssp26,...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ... @wssp27, @wssp28, @wssp29, @wssp30, @wssp31, @wssp32, @wssp33, @wssp34, @wssp35, @wssp36, @wssp37, @wssp38, @wssp39, @wssp40, @wssp41, @wssp42, @wssp43, @wssp44, @wssp45,
@wssp46, @wssp47, @wssp48, @wssp49, @wssp50, @wssp51, @@DocId OUTPUT, @@Level OUTPUT , @@DoclibRowId OUTPUT,@wssp52 OUTPUT,@wssp53 OUTPUT,@wssp54 OUTPUT,@wssp55 OUTPUT ; IF @@iRet <> 0 GOTO done; EXEC @@iRet = proc_TransferStream @@S, @@DocId, @@Level,
@wssp56, @wssp57, @wssp58; IF @@iRet <> 0 GOTO done; EXEC proc_AL @@S,@DN,@LN,@@Level,0,N'London/Broking/Documents/E/E _ E Foods Corporation',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,1,N'London/Broking/Documents/E',N'E _ E Foods Corporation',72,85,83,1,N'';EXEC
proc_AL @@S,@DN,@LN,@@Level,2,N'London/Broking/Documents/E/E _ E Foods Corporation',N'2013',72,85,...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ...83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,3,N'London/Broking/Documents/E/E _ E Foods Corporation/2013',N'QA11G029601',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,4,N'London/Broking/Documents/K',N'Konig
_ Reeker',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,5,N'London/Broking/Documents/K/Konig _ Reeker',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,6,N'London/Broking/Documents/K/Konig _ Reeker/2012',N'QA12E013201',72,85,83,1,N'';EXEC proc_AL
@@S,@DN,@LN,@@Level,7,N'London/Broking/Documents/K/Konig _ Reeker/2012',N'A12EL00790',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,8,N'London/Broking/Documents/K/Konig _ Reeker/2012',N'A12DA00720',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,9,N'London/Broking/Documents/K/Konig
_ Reeker/2012',N'A12DC00800',72,85,83,1,N'';EXEC proc...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ..._AL @@S,@DN,@LN,@@Level,10,N'London/Broking/Documents/A',N'Ace European Group Limited',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,11,N'London/Broking/Documents/A/Ace
European Group Limited',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,12,N'London/Broking/Documents/A/Ace European Group Limited/2012',N'JXB88435',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,13,N'London/Broking/Documents/A/Ace European Group
Limited/2012/JXB88435/Closings',N'PRM 1',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,14,N'London/Broking/Documents/A/Ace European Group Limited/2012/JXB88435/Closings',N'PRM 2',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,15,N'London/Broking/Documents/C',N'C
Moore-Gordon',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,16,N'London/Broking/Documents/C/C Moore-Gordo...
02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ...n',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,17,N'London/Broking/Documents/C/C Moore-Gordon/2012',N'QY13P700201',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,18,N'London/Broking/Documents/C/C
Moore-Gordon',N'2013',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,19,N'London/Broking/Documents/C/C Moore-Gordon/2013',N'Y13PF07010',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,20,N'London/Broking/Documents/A/Ace European Group Limited/2012/JXB88435/Closings',N'ARP
7',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,21,N'London/Broking/Documents/A/Ace European Group Limited/2012/JXB88435/Closings',N'ARP 8',72,85,83,1,N'';EXEC proc_AL . . .
Thanks in advance A

SharePoint and SQL Server installed on same server or how is the setup?
i would start to enable the developer dashboard, analyze the report of the developer dashboard...
you will see if any webpart, or page or sql server query taking too much time.
http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Question about the CSS behavior when using layer 3 sticky and sticky table

Hi everyone,
I have a question about the CSS behavior when using layer 3 sticky and sticky table is full.
If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS
handle subsequent needed sticky requests ?
advanced-balance sticky-srcip
sticky-inact-timeout 30
CSS document says that
Note:
If you use the sticky-inact-timeout command to specify the inactivity timeout
period on a sticky connection, when the sticky table becomes full and none of
the entries have expired from the sticky table, the CSS rejects subsequent
needed sticky requests.
My question is what is the next reaction by doing the CSS if the CSS is in the
following condition:
when the sticky table becomes full and none of the entries have expired from
the sticky table, the CSS rejects subsequent needed sticky requests
Does CSS just rejects/drops subsequent needed sticky requests ?
or
Does CSS does not stick subsequence requests to particular service but CSS forward
subsequence requests with round-robin basis ? which means if the sticky table is full,
the CSS just works round-robin load balancing fashion for subsequence requests ?
Your information would be appreciated.
Best regards,

Hello,
There is a good document explaining this on Cisco web site
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080094b4b.shtml
It depends if the sticky-inact-timeout is used or not. If not, it's FIFO (the oldest entry in the sticky table is removed). If yes, the CSS will reject the next sticky request.
Rgds,
Gaetan
Rgds
Gaetan

Problems when removing reference of a key-figure structure

Dear All,
While working in the query designer, when I remove the reference from a globally used key-figure structure (using the context menu of the structure) for some editing, the query output is then not the same as it use to be when the reference was not removed.
Do we need to maintain any setting or activate/generate the KF structure once it is changed from its initial state (like in the above case I discussed).
My Exact problem : - I have a input ready key figure (for planning) that remains input ready when the query is executed without removing the reference from the structure, however when i remove the reference from the structure, it becomes non-input ready.
Please suggest.

Dear All,
While working in the query designer, when I remove the reference from a globally used key-figure structure (using the context menu of the structure) for some editing, the query output is then not the same as it use to be when the reference was not removed.
Do we need to maintain any setting or activate/generate the KF structure once it is changed from its initial state (like in the above case I discussed).
My Exact problem : - I have a input ready key figure (for planning) that remains input ready when the query is executed without removing the reference from the structure, however when i remove the reference from the structure, it becomes non-input ready.
Please suggest.

Delete emails from server when removed from phone inbox

I want my server (Verizon Yahoo) to trash and delete messages when I trash or delete them on my 5s. I have gone into my Verizon account on the phone, made sure Trash was selected rather than Archive, selected "Delete from server..."when removed from inbox"", restarted, etc. Everything else works in the account, and when I delete on the server, it is deleted on the phone. I want emails to delete from the server when I remove them from the phone's inbox. Supposed to happen, but doesn't.

Thanks for the reply. I wasn't very clear, I guess. What I want to do is Trash or Trash>Delete emails on my iPhone 5s and have them go away from the inbox on my Verizon/Yahoo server. That does not happen now, even though I have set the setting on my phone to do so. All the stuff in my inbox on the server reappears the next time my phone inquires, including the emails I've sent to Trash (on the phone) and those I've Trash>Deleted there. Not too worried about permanent, real, NSA-type deletion, because that just isn't going to happen - I am worried about the poor agent at NSA who has to read my boring, mundane emails, though. I just don't want to see stuff I've Deleted from my phone's inbox come back to the inbox. Zombiemail!

Escrow the recovery key in DB server and not in AD when removable drive is encrypted.

Is there any way to escrow the recovery key in the database server and not in AD when removable drive (USB drive) is encrypted via manage-bde command line? The data recovery agent is not enabled in our organization.
"Choose how bitlocker protected removable Drives can be recovered" for removable drives is disabled in our Group policy also.
Please advise. Thank you.

As far as I am concerned, you cannot do that when you are using the command line "Manage-bde".
The reason is because, the manage-bde command line parameters doesn't support saving recovery keys to databases. Also there is not any group policy defined for it.
I you want an option to save recovery keys in a database rather than the AD, I would recommend to use MBAM (Microsoft Bitlocker Administration and Monitoring).
Gaurav Ranjan

Error message reads, " Wizard Interuppted before InDesign CS2 was comletely installed" when removing

Adobe Tech Support no longer supports CS2 since the release of CS4 and has referred me to knowledgebase and the forum for help.
This is my original problem:
When you try to start Adobe InDesign CS2, or Adobe InCopy CS2, the application returns one of the following error messages:
-- "Could not personalize your copy of [application] because of missing or invalid personalization information."
-- "Please personalize your copy of [application] to continue the setup process."
-- "The serial number you provided is not valid. Please check your serial number and re-enter it"
I was referred to:
http://kb.adobe.com/selfservice/viewContent.do?externalId=331649
The instructions for all methods require that I remove InDesign, but I get an error message that says "Wizard Interuppted before InDesign CS2 was completely installed" when removing.
My OS is Windows XP. Any help is highly appreciated.
Thank you!

Step one is to back up your computer in case anything goes wrong.
Once you've done that, look at http://kb.adobe.com/selfservice/viewContent.do?externalId=331300 which lists all the folder locations for the creative suite along with the registry keys. It says you should uninstall using ad/remove, but if this doesn't work it should be OK to remove things manually and edit the registry, then run the Windows Installer Cleanup Utility.
At that point you should reboot and you should be able to try installing again.

Warning Query was cahnged ! Characteristic no longer exist' in workbook

Hi all
I am getting one warning ' Query was cahnged ! Characteristic no longer exist' while opening the work book
I have though cahnaged the query but every time I am getting this warning. Is there any way out to get ridof this warning message
Thanks
Sunny

Hi,
BizarreQuery Warning!
Check this thread to get the exact answer and cause of your issue.The issue is because you have changed the query and your workbook was saved befor you had changed your query.
-Mayuri

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Need to control rendering resolution when removing overlapping objects in Acrobat X Pro

When removing hidden information from a PDF using the Acrobat X Pro function Tools | Protection | Remove Hidden Information or Tools | Protection | Sanitize Document, Acrobat appears to remove overlapping objects by rendering the entire page into an image at, from what I can tell, 144 dpi. This resolution is too low for my purposes as small text becomes hard to read both on screen and when printed. Is there a way to control the rendering resolution?

What I was refering to by flattening is the "flatten image" function in Photoshop. As in the option directly below merge visable and merge down in the layers flyout menu. For some reason running that function or the rasterize function in the object menu in illustrator is the only way I can make sure transparecny boxs dont show up when I print through my Fiery Rip software. Like I mentioned this method works well with individual pages in multiple page pdfs, but I often have to do this for many images at a time. It would be nice to be able to do the same thing in Acrobat to the whole pdf all at one time.( Of course what would really be nice would be if people would submitt their files correctly to avoid this problem in the first place but that is asking way to much)

Query behavior when removing characteristic

Similar Messages

Maybe you are looking for