Query development for Vendar details
Dear All,
We want to develop an query for the below mentioned requirement.
As we have not familiar (not worked) with SAP Query development process,can any one guide us how to proceed with detail steps.
The input will be the Vendor Code ( with selection range )
The output requirement are as follows
Vendor Code
Vendor Name
Vendor Address
(We need a selection field in the input screen for vendor code)
Thanks for your time and patience
Regards
Hi.
In SQ02 create info-set. You need table. Choose Table join... (Table LFA1).
ThanDrag and drop requared fields from left to right(to field gruop).
You can use button Join to join some more tables(LFB1 etc)
Save it and generate.
After that go SQ01,enter name of query and click Create, while doing it select Created infoset.Save...
Than choose buton InfosetQuery and select which fields do you want in selection and output list.
Than go QUERY-MORE function-Generate program. Mantion this name.
Go se93, create transaction with this name of program
Similar Messages
-
ACR VS RAW Developer for image detail
I am an avid/loyal ACR fan who makes mural sized landscape prints from digital capture. I keep hearing on various forums how Raw Developer (Mac) is the best out there for extracting every ounce of discernable detail from a raw file to a print. I am to the point of considering purchasing the software to do the tests.
If it proves to be a real world benefit, I will likely have to use it.
What has been your experience with Raw Developer vs. ACR in terms of quality detail?
If the above is true, might ACR step up to bat and give us another optional algorithm for maximized detail (like a "maximize detail" button in ACR to choose a more detailed conversion)?
Feel free to comment on the issue however you want.
I want detail!I was a big convert and advocate for Raw Developer. I paid my $125 to Brian and I don't regret it one bit. He's a cool and patient guy and answered my emails without fail.
However, the more I got into using the color editing tools on a number of differently exposed and composed images with varying color temps, the more I started not liking what it did to the color. The default settings were pretty good but whenever I adjusted color temp and the saturation and hue sliders including other adjustements I noticed a strange patina in the hues that showed up in my edits that bothered me.
For instance when adjusting RD's red/green tint slider the green looks more like a urine green where as ACR's hue is more pure. When I placed side by side previews of the same image between the two converters I noticed RD's deep shadows on a number of images were void of any color while ACR's retained it.
Some users like the look of neutralized shadows on their display, but from my experience it doesn't look too good on a print. I come from a painting background and charcoal neutral shadows is a big no-no when painting shadow detail on canvas. It ruins the 3D effect. This is the main reason why offset pressman will either include an extra cyan plate duplicate of the black channel or mix blue into the black ink on press. It adds pop to the image.
ACR's color engine is far superior in this respect.
Also I get odd zipper like sharpening artifacts along edge detail in some images with RD. It's still an amazing Raw converter in that it retains the simple interface as ACR with added color controls of Lab and RGB curves which ACR doesn't. But I found I had to work to much to get what I wanted compared to using ACR.
Your experience may be different. -
Standard Query (Sq01) for Leave Details
Hi Experts,
I have created a query using SQ01 for Leave Details which includes all infotypes required viz. 2001, 2002 etc.
When i use this query for any employee using any subtype/absence type, it works fine, but when i use it for a particular type i.e. On Duty, it do not brings any result although it has the data in the respected infotype. This absence type has been newly created by my functional consultant.
Kindly let me know if there are any possible solutions for this. If yes, plz let me know the steps how to correct it.
Prateekresolved.
-
Custom development for Address details screen
Hi Experts,
In the ESS screen, we have to provide one link for every employee. When the user will click on the link, one letter in PDF format should be displayed to the user. This PDF will act as a "Address Certificate". The address certificate will contain information related with name, address, passport details etc. How we can achieve this?
In my view, we will have to create one Z-RFC. The ABAPer will create the Z-RFC. Now the input for the Z RFC will be employee no. The output will be Name, Address and Passport details.
The information provided in table format needs to be converted into PDF form. How we can do so? What all services needs to be activated for this?
Regards,
GaryHi.
In SQ02 create info-set. You need table. Choose Table join... (Table LFA1).
ThanDrag and drop requared fields from left to right(to field gruop).
You can use button Join to join some more tables(LFB1 etc)
Save it and generate.
After that go SQ01,enter name of query and click Create, while doing it select Created infoset.Save...
Than choose buton InfosetQuery and select which fields do you want in selection and output list.
Than go QUERY-MORE function-Generate program. Mantion this name.
Go se93, create transaction with this name of program -
Query for vendor details in F-53
Hi,
Need help on query development for vendor payment through F-53 with selection criteria Co. code, Fiscal Year, Fiscal Period, Transaction code and document type. Required output would be Co. code, Fiscal year, vendor number, document number and amount.
I tried to develope query using tables BKPF & BSEG but system did not allow BSEG as it's a structure. Then tried with BKPF & BSAK but it's not pulling any data for query.
Also, would like to know is there any standard report available for vendor payment through F-53?Hi Hein,
Thanks for your reply.
The issue in FBL1N is I cannot enter the TCode F-53 and the document type used for F-53 , is used by other transactions also. Hence I am not getting the correct report.
Any help on developing a querry for this.
Thanks
Rajesh -
Hi Team,
I have build two query report.
Q1 qury:
SELECT hp.party_name "CUSTOMER_NAME",
hl.address1,
hl.address2,
hl.address3,
hl.city,
hl.state,
hl.postal_code,
hca.account_number "CUSTOMER_CODE",
aps.cash_receipt_id,
hcsu.LOCATION "LOCATION", -- Added by Kanchan
rct.trx_number "INVOICE_NUMBER",
--ar.receipt_number,
HOU.Name "Company Name",
rbs.NAME "SOURCE_NAME",
aps.GL_DATE "GL DATE",
rct.trx_date "INVOICE_DATE",
--SUBSTR(TRUNC(rct.trx_date),4) "INVOICE_PERIOD",
rct.term_due_date "DUE_DATE",
arc.NAME "COLLECTOR_NAME",
rctl.line_number "SR_NO",
DECODE (rctl.memo_line_id, NULL, rctt.description, decode( rctt.description, arml.description, rctt.description , rctt.description || ' ' || CHR (10) || arml.description)) "DESCRIPTION",
rctl.uom_code "UNIT_OF_MEASURE",
rctl.quantity_invoiced "QUANTITY",
rctl.unit_selling_price "UNIT_RATE",
ROUND (rctl.extended_amount) "AMOUNT",
arn.text "COMMENTS",
rct.customer_trx_id "TRX_ID",
rct.org_id "ORG_ID",
rct.INVOICE_CURRENCY_CODE,
hca.cust_account_id "CUSTOMER_ID"
FROM ra_customer_trx_all rct,
ra_cust_trx_types_all rctt,
ar_payment_schedules_all aps,
-- ar_receivable_applications_all acra,
-- ar_cash_receipts_all ar,
ra_batch_sources_all rbs,
hz_cust_site_uses_all hcsu,
hz_cust_acct_sites_all hcas,
hz_party_sites hps,
hz_cust_accounts hca,
hr_all_organization_units HOU,
hz_parties hp,
hz_locations hl,
ra_customer_trx_lines_all rctl,
ar_memo_lines_all_tl arml,
hz_customer_profiles hcp,
ar_collectors arc,
ar_notes arn
WHERE rct.cust_trx_type_id = rctt.cust_trx_type_id
AND rctt.TYPE = 'INV'
AND rct.complete_flag = 'Y'
AND rct.batch_source_id = rbs.batch_source_id
-- AND acra.cash_receipt_id = ar.cash_receipt_id
-- and acra.applied_customer_trx_id = rct.customer_trx_id
AND rct.org_id = rbs.org_id
and hou.organization_id=rct.LEGAL_ENTITY_ID
AND rct.bill_to_customer_id = hca.cust_account_id
AND aps.customer_trx_id = rct.customer_trx_id
AND hca.party_id = hp.party_id
AND rct.bill_to_site_use_id = hcsu.site_use_id
AND rct.org_id = hcsu.org_id
AND hcsu.cust_acct_site_id = hcas.cust_acct_site_id
AND hcsu.org_id = hcas.org_id
AND hcas.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND rct.customer_trx_id = rctl.customer_trx_id
AND rct.org_id = rctt.org_id
AND rctt.org_id = rctl.org_id
AND rctl.memo_line_id = arml.memo_line_id(+)
AND rctl.line_type = 'LINE'
AND rct.bill_to_site_use_id = hcp.site_use_id(+)
AND hcp.collector_id = arc.collector_id(+)
AND rct.customer_trx_id = arn.customer_trx_id(+)
AND Nvl(arn.note_id,0) = Nvl((SELECT MAX (note_id)
FROM ar_notes arnt
WHERE arnt.customer_trx_id = rct.customer_trx_id),0)
AND rct.org_id = :p_org_id
--AND rct.batch_source_id = :p_batch_src_id
AND TRUNC(aps.gl_date) BETWEEN TRUNC(:p_trx_date_low) AND TRUNC(:p_trx_date_high)
--AND ar.receipt_number='660754'
--and hca.cust_account_id=937288
and hca.cust_account_id=5436 --291784 ----5637 --5436
-- and rct.trx_number= 15762455 --15195934 --15044822
-- AND hca.account_number ='NDDGSP035'
&LP_TRX_NO
&LP_CUST_NO
ORDER BY hca.account_number,
rct.trx_date,
rctl.line_number
and Q2 query :
select customer_id,
NVL(receipt_amount+receipt_amount2,0)Payment
from
SELECT distinct hca.cust_account_id "CUSTOMER_ID" ,
(SELECT DISTINCT
--e.customer_id CUST_ID,
SUM((a.amount) * NVL (a.exchange_rate, 1)) Receipt_Amount
FROM ar_cash_receipts_all a,
ar_cash_receipt_history_all b,
ar_receipt_classes d,
ar_customers e,
hz_party_sites hzps,
xx_ar_addresses_v g,
hz_cust_acct_sites_all h,
hz_cust_site_uses_all f,
hr_organization_units_v i
WHERE b.cash_receipt_id = a.cash_receipt_id
AND a.org_id = i.organization_id
AND a.receipt_method_id = d.receipt_class_id
AND e.customer_id=g.customer_id
AND hzps.party_site_id = h.party_site_id
AND h.party_site_id = g.party_site_id
AND f.site_use_code = 'BILL_TO'
AND f.cust_acct_site_id = h.cust_acct_site_id
AND g.language_description = 'American English'
AND b.first_posted_record_flag = ('Y')
--and e.customer_id=937288
and e.customer_id= hca.cust_account_id --5436 --291784 --5436
AND f.site_use_id = a.customer_site_use_id
AND E.CUSTOMER_ID = A.PAY_FROM_CUSTOMER ---- ADDED
AND TRUNC (b.gl_date) BETWEEN TRUNC(:p_trx_date_low) AND TRUNC(:p_trx_date_high)
AND a.org_id = :p_org_id) Receipt_amount,
( SELECT
distinct --e.customer_id CUST_ID, --SMAN_10OCT2013_Added distinct_Requested by Biju
SUM((-1 * a.amount) * NVL (a.exchange_rate, 1)) Receipt_AMOUNT
FROM ar_cash_receipts_all a,
ar_cash_receipt_history_all b,
ar_receipt_classes d,
xx_ar_addresses_v g,
ar_customers e,
hz_party_sites hzps,
hz_cust_acct_sites_all h,
hz_cust_site_uses_all f,
hr_organization_units_v i
WHERE b.cash_receipt_id = a.cash_receipt_id
AND a.org_id = i.organization_id
AND a.receipt_method_id = d.receipt_class_id
AND e.customer_id=g.customer_id
AND hzps.party_site_id = h.party_site_id
AND h.party_site_id = g.party_site_id
AND f.site_use_code = 'BILL_TO'
AND f.cust_acct_site_id = h.cust_acct_site_id
AND g.language_description = 'American English'
AND a.status IN ('NSF', 'REV', 'STOP')
AND a.reversal_date IS NOT NULL
AND b.status = 'REVERSED'
AND E.CUSTOMER_ID = A.PAY_FROM_CUSTOMER ---- ADDED
AND f.site_use_id = a.customer_site_use_id
--and e.customer_id=937288
AND e.customer_id= hca.cust_account_id --5436 --291784 --
AND TRUNC (b.gl_date) BETWEEN TRUNC(:p_trx_date_low) AND TRUNC(:p_trx_date_high)
AND a.org_id = :p_org_id
) receipt_amount2
FROM ra_customer_trx_all rct,
ra_cust_trx_types_all rctt,
ar_payment_schedules_all aps,
ra_batch_sources_all rbs,
hz_cust_site_uses_all hcsu,
hz_cust_acct_sites_all hcas,
hz_party_sites hps,
hz_cust_accounts hca,
hr_all_organization_units HOU,
hz_parties hp,
hz_locations hl,
ra_customer_trx_lines_all rctl,
ar_memo_lines_all_tl arml,
hz_customer_profiles hcp,
ar_collectors arc,
ar_notes arn
WHERE rct.cust_trx_type_id = rctt.cust_trx_type_id
AND rctt.TYPE = 'INV'
AND rct.complete_flag = 'Y'
AND rct.batch_source_id = rbs.batch_source_id
AND rct.org_id = rbs.org_id
and hou.organization_id=rct.LEGAL_ENTITY_ID
AND rct.bill_to_customer_id = hca.cust_account_id
AND aps.customer_trx_id = rct.customer_trx_id
AND hca.party_id = hp.party_id
AND rct.bill_to_site_use_id = hcsu.site_use_id
AND rct.org_id = hcsu.org_id
AND hcsu.cust_acct_site_id = hcas.cust_acct_site_id
AND hcsu.org_id = hcas.org_id
AND hcas.party_site_id = hps.party_site_id
AND hps.location_id = hl.location_id
AND rct.customer_trx_id = rctl.customer_trx_id
AND rct.org_id = rctt.org_id
AND rctt.org_id = rctl.org_id
AND rctl.memo_line_id = arml.memo_line_id(+)
AND rctl.line_type = 'LINE'
AND rct.bill_to_site_use_id = hcp.site_use_id(+)
AND hcp.collector_id = arc.collector_id(+)
--and hca.cust_account_id=5436 --291741--5436
AND rct.customer_trx_id = arn.customer_trx_id(+)
AND Nvl(arn.note_id,0) = Nvl((SELECT MAX (note_id)
FROM ar_notes arnt
WHERE arnt.customer_trx_id = rct.customer_trx_id),0)
AND rct.org_id = :p_org_id
AND TRUNC(aps.gl_date) BETWEEN TRUNC(:p_trx_date_low) AND TRUNC(:p_trx_date_high)
So here i am linking Q1 query with Q2 by Customer_ID data link. But after doing the same , i am getting message. Moreover, when i am running my report , my q2 query runs for all customer_id , which i already hardcoded in Q1 query.
Please help on this issue.
Regards
SachinDear Siva,
Can yoiu please run this code in sql directly , and paste here the results?
You please try as below syntax
SELECT SYSDATE,
CASE
WHEN TO_CHAR (SYSDATE, 'DAY') = 'MONDAY' THEN 'IT IS MONDAY'
WHEN TO_CHAR (SYSDATE, 'DAY') = 'TUESDAY' THEN 'IT IS TUESDAY'
END
FROM DUAL
Edited by: O.Developer on Jan 7, 2013 8:54 AM -
Query regarding the fields details in particular form for all the users in
Dear All,
I have one query regarding the fields details in particular form for all the users in company.
Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce 4.Total 5. Location.
While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including above 4 fieds .
Now my question is how to set the User choice fiels for the particular form that are common to all users.
Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
This is a manual job and you have do do it with every user login.
Alternately, you can try out this link that explains
[How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html] -
Af:query for master detail
Hi Experts,
Can we have an af:query to show master detail data ?
What we generally have is af:query showing records of 1 table. What i want is for the records that get populated from af:query in the master table, i want to show the records in the detail table of the row selected
any idea ?
thnksThank you NewBee. It worked and am able to get the detail information from the master table. I am struggling with another implementation. I have 3 radio buttons in the global template which I am referencing in all my pages.
The template has 3 radio buttons. Contacts, Plans and Users. The three queries are completely different from one another.
On click of Contacts, I should display the respective af:query for Contacts, Plans and Users without displaying the resultant table. This query panel will be global to all the pages.
I have tried setting it as follows:
<af:panelGroupLayout layout="vertical"
id="pt_pgl3"
rendered="#{baseBean.searchContactsSelected == 'true'}"
visible="#{baseBean.searchContactsSelected == 'true'}">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.GloablSearchByContactsVOCriteriaQuery.queryDescriptor}"
model="#{bindings.GloablSearchByContactsVOCriteriaQuery.queryModel}"
queryListener="#{bindings.GloablSearchByContactsVOCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.GloablSearchByContactsVOCriteriaQuery.processQueryOperation}"
resultComponentId="::contactSearch:md1"/>
<f:subview id="contactSearch">
<jsp:include page="/contactsSearchResults.jspx"/>
</f:subview>
<af:panelGroupLayout>
I have tried various implementations to the best of my knowledge but its not rendering. Is it possible to navigate to a different jspx on click of Search button of af:query. This will give me an opportunity to display different pages based on the Search action and keeping the search on a global level.
Hope I was clear in explaining the issue
Thanks! -
Query to get the details of Blocking and deadlock occurred for the Day
Hi,
I need a query to get the details of blocking and deadlock occurred for the day.You havent specified which version of SQL you are using which makes it difficult to give a solution. Assuming its latest versions , by default SQL Server (in any versions) doesnt track blocking information.
You need to run some kind of queries/traces to capture blocking. The same goes with Deadlocks where majority of the DBA's enable trace flag 1222/1205 when they suspect deadlocks happening.
Check this link -
http://dba.stackexchange.com/questions/10644/deadlock-error-isnt-returning-the-deadlock-sql/10646#10646
This link gives code to get historic deadlock information. I havent used it , I just googled to get that.
That being said if you are looking for something to capture for the future check the below links.
Check these links on how to setup extended events to capture deadlock and blocking.
http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/12/21/an-xevent-a-day-21-of-31-the-future-tracking-blocking-in-denali.aspx
http://blogs.msdn.com/b/sqlserverfaq/archive/2013/04/27/an-in-depth-look-at-sql-server-memory-part-2.aspx
http://blogs.technet.com/b/mspfe/archive/2012/06/28/how_2d00_to_2d00_monitor_2d00_deadlocks_2d00_in_2d00_sql_2d00_server.aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Is it too much to ask MS for a simple ad-hoc query tool for end users?
Hello
This is a general MS BI topic and not specific to Power Query, but I couldn't find a more suitable general forum for it.
This posting is the result of the frustration I have with MS BI stack, whereby a simple ad-hoc drag and drop query tool to get the data in a table format (preferably from a relational
data source) is missing, something that other big vendors have, such as SAP Business Objects Universe and the associated tools. The deprecated SSRS Report model and SMDL was the closest MS ever got to this functionality (although that had some limitations
too), which unfortunately is dead now in favour of all sort of "Power" tools that basically can’t deliver the same functionality.
The requirement is pretty simple: provide users with a tool that they can drag and drop fields from different entities in a data model without having to worry about entity relationships and
apply necessary filters and get the data out in Excel or CSV, no fancy (or even simple) aggregation or formatting is required, and users should only see the rows they are authorized to see, i.e. row level security (RLS) of data.
Let’s see what we have at our disposal from MS BI:
From the modeling perspective, we have relational models in the database that support RLS with views, but obviously cannot maintain PK-FK relationships in the database model between views. Other
models are .Net Entity Data model Framework model exposed as OData, and SSAS tabular, SSAS PowerPivot, SSAS multidimensional, which you can find a good comparison of their features here:
http://www.sqlchick.com/entries/2012/3/4/decisions-powerpivot-ssas-tabular -or-ssas-multidimensional-m.html
From the tools perspective we have:
Power Query on top of a relational database (SQL Server): Can connect to relational databases easily, generated queries are optimal, detects relationships with entities, but only when entities
are tables and have PK-FK relationships enforced in the database. So can’t detect relationships with views and hence can’t enforce RLS, so this is not an option unless users keep joining entities, which is not a desirable option either.
Power Query on top of an OData: Works well except that queries generated for multiple entity expansion are terrible (look here for more details:
http://social.technet.microsoft.com/Forums/en-US/7a8b8e52-d3a9-42af-bc52-9d5459c00529/odata-multilevel-expand-query-issue?forum=powerquery). In addition all filtering and projections are done at client side, so even if you want 1 row out of 1 million, all
rows are brought over to Excel before filtered. Overall this results in unacceptable performance even for small sized data.
Power Query on top of a tabular model: Doesn’t support that type of data source yet (http://social.technet.microsoft.com/Forums/en-US/ebcccb5e-7058-4046-917d-3d7fcf60cbdc/tabular-model-as-data-source-for-power-query?forum=powerquery).
Even if it did, tabular models don’t support Many-to-Many relationships out of the box and not sure if there are plans to support tabular models in Direct Query mode in Power Query to take care of RLS.
Excel on top of tabular models or multidimensional models: The tabular model should not be in Direct Query mode and you only get to use PivotTable to query the model. PivotTables are not famous
for generating optimal MDX queries, so performance is not going to be acceptable if you are dealing with large dimensions, especially large junk and degenerate dimensions. You can use drilltrough to get details of a measure, but you have to specify the columns
for a drilltrough action upfront, no flexibility for users to select what they want to see.
PowerPivot on top of relational databases: The query designer cannot detect relationships between views, so users have to perform manual joins, not an option.
PowerPivot on top of a multidimensional or tabular model: The query designer doesn’t generate optimal MDX queries by drag and drop. Especially there doesn’t seem to be a way to add related
attributes of a dimension attribute to the query without cross joins which results in poor performance on large dimensions. Other issues found here
http://sqlblog.com/blogs/marco_russo/archive/2010/08/24/using-ssas-2005-2008-as-powerpivot-data-source-query-designer.aspx. In addition the result set has ugly column names and issues with data types, such as interpreting numeric data types as Text, and
there’s no straight forward way of getting the data from PowerPivot directly to Excel. The user either has to do a copy/paste (which doesn’t work on large datasets) or create a pivot table, bring the measure, and drillthrough the measure to get the details
in table format.
PowerPivot with OData: Treats every entity as a separate table to import, not suitable for our use case.
Report Builder and SSRS on top of relational, multidimensional or tabular model: Given the query designer is the same as PowerPivot, it has similar issues. In addition, there are 4 more steps
from designing a query to generating an Excel or CSV output, not an option.
PowerView: Works against tabular and multidimensional models, but there’s no way of exporting data to Excel sheet. Besides the add-in is not available for Excel 2010.
Good old MS-Access: Link to tables and views through ODBC, create relationships between entities and give each user a copy of that Access database to create their queries, and deal with the
nightmares of updates to the model and distribution of new models to the users! Did I mention Access as an option?
So there you go, 10 options, none of which can deal with a seemingly simple use case sufficiently. At the moment, the best among them appears to be option 6 against a heavily optimized OLAP
cube, and perhaps #3 when/if Power Query support for tabular models in direct query mode arrives. Perhaps I am missing something very obvious, and would like someone to enlighten me here.
Thanks
MRHi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789 -
Quick Question... About SQL Developer for MAC - MAC Users please help.
Hello everyone, I hope that someone out there can tell me that I am not crazy.
I have installed SQL Developer for Mac OSX to access a MS-SQL database, and perform simple query operations. For the most part, I have been thrilled to have a Mac version of software that's fully featured.
Details on my current setup:
SQL Developer
Version 2.1.1.64
Build MAIN-64.45
Mac OSX V10.6.3
JTDS-1.2.5 JDBC driver
Database connection is SQL Server 2005
Anyway, my problem is this... I cannot locate the Query Builder function within this software. I have found the tutorials on how to use it, and it would appear to be located when you right-click the SQL worksheet to open the context menu. This option is not present in my software, and I need to figure out why. This screenshot is what I see when I right-click.
Does anyone know if this is related to MS-SQL-2005?
http://img10.imageshack.us/img10/1195/screenshot20100523at102.png
Any assistance you could provide would be AWESOME! Thank you!
Edited by: user13118614 on May 23, 2010 3:05 PMFirst of all you need an active connection in the worksheet (upper right drop-down).
But even then it might not work. Sorry you were "thrilled to have a Mac version of software that's fully featured", because even if it is, MsSQL isn't. The tool is mainly focussed in providing a migration platform to Oracle, so a lot of the cool stuff is Oracle only.
Regards,
K. -
Alv Report for invoice details
Dear All,
I need to develop one alv report for following details. i developed coding for this requirment but i am getting some error.kindley help me to how to move data from different internal table to final internal table. I used LOOP AT and READ Statement even i didn't get any output.
kindley help me out.
TYPES: BEGIN OF XT_TAB,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
STCD1 LIKE LFA1-STCD1,
STCD2 LIKE LFA1-STCD2,
STCD3 LIKE LFA1-STCD3,
STCD4 LIKE LFA1-STCD4,
END OF XT_TAB.
TYPES: BEGIN OF YT_TAB,
BUKRS LIKE BSEG-BUKRS,
BELNR LIKE BSEG-BELNR,
BUZEI LIKE BSEG-BUZEI,
LIFNR LIKE BSEG-LIFNR,
GJAHR LIKE BSEG-GJAHR,
END OF YT_TAB.
TYPES: BEGIN OF ZT_TAB,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
STCD2 LIKE LFA1-STCD2,
BELNR LIKE BSEG-BELNR,
BUZEI LIKE BSEG-BUZEI,
GJAHR LIKE BSEG-GJAHR,
END OF ZT_TAB.
I N T E R N A L T A B L E D E C L A R A T I O N S *
*-----Internal table to store data
DATA: ITAB1 TYPE STANDARD TABLE OF XT_TAB INITIAL SIZE 0,
WA_TAB1 TYPE XT_TAB.
DATA: ITAB2 TYPE STANDARD TABLE OF YT_TAB INITIAL SIZE 0,
WA_TAB2 TYPE YT_TAB.
DATA: ITAB TYPE STANDARD TABLE OF ZT_TAB WITH HEADER LINE,
WA_ITAB TYPE ZT_TAB,
ITAB_FINAL2 TYPE STANDARD TABLE OF ZT_TAB.
DATA: ITAB_TEMP1 TYPE STANDARD TABLE OF ZT_TAB WITH HEADER LINE.
Selection Screen Declarations *
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN begin OF LINE.
SELECTION-SCREEN COMMENT (23) text-003 FOR FIELD P_LIFNR.
PARAMETERS P_LIFNR LIKE LFA1-LIFNR OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK bk1.
START-OF-SELECTION.
PERFORM XTRACT_DATA.
END-OF-SELECTION.
*-----Filling the Output table
PERFORM populate_main_table.
PERFORM BUILD_FIELDCATALOG.
PERFORM SORTING.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_ALV_GRID_DISPLAY.
Form XTRACT_DATA
FORM XTRACT_DATA .
*SELECT
a~LIFNR
a~NAME1
a~STCD2
b~BELNR
b~BUZEI
b~GJAHR
INTO TABLE ITAB
FROM LFA1 as a INNER JOIN BSEG as b
ON aLIFNR = bLIFNR
WHERE a~LIFNR = P_LIFNR.
SELECT LIFNR
NAME1
STCD1
STCD2
STCD3
STCD4
FROM LFA1
INTO TABLE ITAB1
WHERE LIFNR = P_LIFNR.
IF NOT ITAB1[] IS INITIAL.
SORT ITAB1 BY LIFNR.
SELECT BELNR
BUZEI
LIFNR
GJAHR
INTO TABLE ITAB2
FROM BSEG
FOR ALL ENTRIES IN ITAB1
WHERE LIFNR = ITAB1-LIFNR.
ENDIF.
ENDFORM. " XTRACT_DATA
*& Form POPULATE_MAIN_TABLE
text
--> p1 text
<-- p2 text
FORM POPULATE_MAIN_TABLE .
LOOP AT ITAB1 INTO WA_TAB1.
ITAB-LIFNR = ITAB1-LIFNR.
ITAB-NAME1 = ITAB1-NAME1.
ITAB-STCD2 = ITAB1-STCD2.
READ TABLE ITAB2 INTO WA_TAB2 WITH KEY LIFNR = WA_TAB1-LIFNR.
IF sy-subrc = 0.
ITAB-BELNR = ITAB1-BELNR.
ITAB-BUZEI = ITAB1-BUZEI.
ITAB-GJAHR = ITAB1-GJAHR.
ENDIF.
ENDLOOP.
ENDFORM. " POPULATE_MAIN_TABLE
Form BUILD_FIELDCATALOG
FORM BUILD_FIELDCATALOG .
REFRESH t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 1.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Vendor Number'.
wa_fcat-seltext_m = 'Vendor Number'.
wa_fcat-seltext_l = 'Vendor Number'.
wa_fcat-fieldname = 'LIFNR'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 2.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Vendor Name'.
wa_fcat-seltext_m = 'Vendor Name'.
wa_fcat-seltext_l = 'Vendor Name'.
wa_fcat-fieldname = 'NAME1'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 3.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Vendor TIN Number'.
wa_fcat-seltext_m = 'Vendor TIN Number'.
wa_fcat-seltext_l = 'Vendor TIN Number'.
wa_fcat-fieldname = 'STCD2'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 4.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Document No'.
wa_fcat-seltext_m = 'Document No'.
wa_fcat-seltext_l = 'Document No'.
wa_fcat-fieldname = 'BELNR'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 5.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Item Number'.
wa_fcat-seltext_m = 'Item Number'.
wa_fcat-seltext_l = 'Item Number'.
wa_fcat-fieldname = 'BUZEI'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 6.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Fiscal Year'.
wa_fcat-seltext_m = 'Fiscal Year'.
wa_fcat-seltext_l = 'Fiscal Year'.
wa_fcat-fieldname = 'GJAHR'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
ENDFORM. " BUILD_FIELDCATALOG
Form BUILD_LAYOUT
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'TOTALS'.
ENDFORM. " BUILD_LAYOUT
Form BUILD_ALV_GRID_DISPLAY
FORM BUILD_ALV_GRID_DISPLAY .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
is_layout = gd_layout
it_fieldcat = t_fcat[]
it_events = gt_events
is_print = gd_prntparams
it_sort = it_sortcat[]
i_save = 'X'
TABLES
t_outtab = ITAB
EXCEPTIONS
program_error = 1
OTHERS = 2.
thanks and regards
MurugeshTYPES: BEGIN OF XT_TAB,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
STCD1 LIKE LFA1-STCD1,
STCD2 LIKE LFA1-STCD2,
STCD3 LIKE LFA1-STCD3,
STCD4 LIKE LFA1-STCD4,
END OF XT_TAB.
TYPES: BEGIN OF YT_TAB,
BUKRS LIKE BSEG-BUKRS,
BELNR LIKE BSEG-BELNR,
BUZEI LIKE BSEG-BUZEI,
LIFNR LIKE BSEG-LIFNR,
GJAHR LIKE BSEG-GJAHR,
END OF YT_TAB.
TYPES: BEGIN OF ZT_TAB,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
STCD2 LIKE LFA1-STCD2,
BELNR LIKE BSEG-BELNR,
BUZEI LIKE BSEG-BUZEI,
GJAHR LIKE BSEG-GJAHR,
END OF ZT_TAB.
I N T E R N A L T A B L E D E C L A R A T I O N S *
*-----Internal table to store data
DATA: ITAB1 TYPE STANDARD TABLE OF XT_TAB INITIAL SIZE 0,
WA_TAB1 TYPE XT_TAB.
DATA: ITAB2 TYPE STANDARD TABLE OF YT_TAB INITIAL SIZE 0,
WA_TAB2 TYPE YT_TAB.
DATA: ITAB TYPE STANDARD TABLE OF ZT_TAB WITH HEADER LINE,
WA_ITAB TYPE ZT_TAB,
ITAB_FINAL2 TYPE STANDARD TABLE OF ZT_TAB.
DATA: ITAB_TEMP1 TYPE STANDARD TABLE OF ZT_TAB WITH HEADER LINE.
Selection Screen Declarations *
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN begin OF LINE.
SELECTION-SCREEN COMMENT (23) text-003 FOR FIELD P_LIFNR.
PARAMETERS P_LIFNR LIKE LFA1-LIFNR OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK bk1.
START-OF-SELECTION.
PERFORM XTRACT_DATA.
END-OF-SELECTION.
*-----Filling the Output table
PERFORM populate_main_table.
PERFORM BUILD_FIELDCATALOG.
PERFORM SORTING.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_ALV_GRID_DISPLAY.
Form XTRACT_DATA
FORM XTRACT_DATA .
*SELECT
a~LIFNR
a~NAME1
a~STCD2
b~BELNR
b~BUZEI
b~GJAHR
INTO TABLE ITAB
FROM LFA1 as a INNER JOIN BSEG as b
ON aLIFNR = bLIFNR
WHERE a~LIFNR = P_LIFNR.
SELECT LIFNR
NAME1
STCD1
STCD2
STCD3
STCD4
FROM LFA1
INTO TABLE ITAB1
WHERE LIFNR = P_LIFNR.
IF NOT ITAB1[] IS INITIAL.
SORT ITAB1 BY LIFNR.
SELECT BELNR
BUZEI
LIFNR
GJAHR
INTO TABLE ITAB2
FROM BSEG
FOR ALL ENTRIES IN ITAB1
WHERE LIFNR = itab1-lifnr.
ENDIF.
ENDFORM. " XTRACT_DATA
*& Form POPULATE_MAIN_TABLE
text
--> p1 text
<-- p2 text
FORM POPULATE_MAIN_TABLE .
LOOP AT ITAB1 INTO WA_TAB1.
ITAB-LIFNR = ITAB1-LIFNR.
ITAB-NAME1 = ITAB1-NAME1.
ITAB-STCD2 = ITAB1-STCD2.
READ TABLE ITAB2 INTO WA_TAB2 WITH KEY LIFNR = WA_TAB1-LIFNR.
IF sy-subrc = 0.
ITAB-BELNR = ITAB1-BELNR.
ITAB-BUZEI = ITAB1-BUZEI.
ITAB-GJAHR = ITAB1-GJAHR.
ENDIF.
ENDLOOP.
LOOP AT itab1 INTO wa_tab1.
MOVE: wa_tab1-lifnr TO itab-lifnr,
wa_tab1-name1 TO itab-name1,
wa_tab1-stcd2 TO itab-stcd2.
Append itab.
READ TABLE itab2 TRANSPORTING NO FIELDS WITH KEY lifnr = wa_tab1-lifnr.
IF sy-subrc eq 0.
MOVE: wa_tab2-lifnr TO itab-lifnr,
wa_tab2-belnr TO itab-belnr,
wa_tab2-buzei TO itab-buzei,
wa_tab2-gjahr TO itab-gjahr.
Append itab.
endif.
endloop.
*LOOP AT t_agr_tcodes INTO s_agr_tcodes.
READ TABLE t_tstc
TRANSPORTING NO FIELDS
WITH KEY tcode = s_agr_tcodes-tcode.
IF sy-subrc eq 0.
MOVE: s_agr_tcodes-tcode TO it_agr_tcodes-tcode,
s_agr_tcodes-agr_name to it_agr_tcodes-agr_name,
t_tstc-pgmna to it_agr_pgmna.
*Append it_agr_tcodes.
*endif.
*endloop.
ENDFORM. " POPULATE_MAIN_TABLE
Form BUILD_FIELDCATALOG
FORM BUILD_FIELDCATALOG .
REFRESH t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 1.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Vendor Number'.
wa_fcat-seltext_m = 'Vendor Number'.
wa_fcat-seltext_l = 'Vendor Number'.
wa_fcat-fieldname = 'LIFNR'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 2.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Vendor Name'.
wa_fcat-seltext_m = 'Vendor Name'.
wa_fcat-seltext_l = 'Vendor Name'.
wa_fcat-fieldname = 'NAME1'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 3.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Vendor TIN Number'.
wa_fcat-seltext_m = 'Vendor TIN Number'.
wa_fcat-seltext_l = 'Vendor TIN Number'.
wa_fcat-fieldname = 'STCD2'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 4.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Document No'.
wa_fcat-seltext_m = 'Document No'.
wa_fcat-seltext_l = 'Document No'.
wa_fcat-fieldname = 'BELNR'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 5.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Item Number'.
wa_fcat-seltext_m = 'Item Number'.
wa_fcat-seltext_l = 'Item Number'.
wa_fcat-fieldname = 'BUZEI'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
wa_fcat-col_pos = 6.
wa_fcat-row_pos = 1.
wa_fcat-seltext_s = 'Fiscal Year'.
wa_fcat-seltext_m = 'Fiscal Year'.
wa_fcat-seltext_l = 'Fiscal Year'.
wa_fcat-fieldname = 'GJAHR'.
wa_fcat-tabname = 'ITAB'.
APPEND wa_fcat TO t_fcat.
CLEAR t_fcat.
ENDFORM. " BUILD_FIELDCATALOG
Form BUILD_LAYOUT
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'TOTALS'.
ENDFORM. " BUILD_LAYOUT
Form BUILD_ALV_GRID_DISPLAY
FORM BUILD_ALV_GRID_DISPLAY .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
is_layout = gd_layout
it_fieldcat = t_fcat[]
it_events = gt_events
is_print = gd_prntparams
it_sort = it_sortcat[]
i_save = 'X'
TABLES
t_outtab = ITAB
EXCEPTIONS
program_error = 1
OTHERS = 2.
Edited by: Murugesh P on Apr 6, 2009 10:54 AM
Edited by: Murugesh P on Apr 6, 2009 10:54 AM -
Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks aheadHi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards, -
Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
SandeepCheck your query or connection pool settings etc
-
** How to show the master query group for once in Report??
Hi
I've developed a master-detail groups at a report
The master one has it's repeating frame and the detail one has another repeating frame and put at another page at the layout.
The porblem is that the master one is shown (the same record) in pages for times equal to the number of the detail records which is own for that master record!
Example:
if the master record has got three details then the master data will be show for three times (three pages) at run time and then the page number 4 will show the three detail records.
How to make the master data to be shown only for once (page number 1 only) and then show the detail three records at the next page (page number 2) at run time???Hi,
the question back is, what you've done for this. At default the master record is only shown once. Could it be, that the master-fields are inside the repeating frame for the details?
Regards
Rainer
Maybe you are looking for
-
Lion Server VPN Service/Class C IPs/Bonjour
In order to deploy Lion Server's VPN service, you obviously are required to enter an IP range to assign. We are running a standard class C network here, with systems running on 192.168.1.x. The problem is that if a user is accessing the VPN from a re
-
I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that e
-
Deployment error JAX-WS 2.1 & NetBeans 5.5
I am using NetBeans 5.5 with the webserver pack to use the JSF technology. When I am putting the JAX-WS 2.1 jars in the war, Ik get the following deployment error: WEB0100: Loading web module [__JWSappclients:sys.war] in virtual server [server] at [_
-
SAP newbie - would like to understand integration options
What are the choices when it comes to integrating SAP (MySAP, ECC5, Oracle Db) with another external ERP platform (Windows based with MS SQL Db). We wish to create approx 8 interfaces (Sales, Accounts, Stock etc) between a retail ERP and SAP. I und
-
Black housing frame glossy finnish wears off
I think that the paint finnish comes off extremely easily. Idropped it once (on soild not even concrete) and the upper left black corner looks like it has a patch. Even before i dropped it, i noticed 2 corners of the back side had that problem too (p