Query disable status in bex query designer

hi all,
when i opened query in query designer for PA_PA cube it is in disabled mode.iam unabled to restrict or do any changes.and giving error like "the dependent objects are in different transport orders."i installed this particular queries in BI content also.please help me in this issue.
Regards
Vamshi D Krishna

Hi Vamshi,
go to rsa1 - transport connection and select ur query and drag & drop into third screen
u can see the locked request no. of ur query ..
u can take that no. and go to se03 -- give that request no. & execute unlock..
now, again come back to ur transport connection, now u can see under ur query no transport request has been assigned.. select the truck symbol..
It will ask u for the new request no. assign a new request no. of urs and check the query at the designer level. u can able to change the query ..
Hope it helps.
If u have any doubt reply to this message.
Thanks & Regards,
V. Vijay Kumar.

Similar Messages

% Calculactions in Bex Query Designer

Hi Experts,
Could you please on how can i perform the below % Calculactions in Bex Query Designer.
    Vendor No line item Not = L category =A status =RFQ :for items
Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
requament: % RFQ Without Response:
Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                               ( 4/5 * 100= 80%)
Percentage RFQ without response= 100 - Percentage of Quotation response
                                                              = 100-80 = 20%
How can i perform the % Calculations in Bex Query Designer.
Vendor
Purchasing document
Indicator: Line Item
Purch. doc. category
Purch. doc. status
Item
Number of Records
category A item L
200274
V-LINE EUROPE EXPORT MARKETING
6000003778
L
A
Not assigned
10
1
20
1
30
1
6000003779
Not assigned
A
Not assigned
40
1
9000000046
Not assigned
A
RFQ
10
1
1
20
1
1
30
1
1
40
1
1
Result
8
4
thank you

Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
Your formulas seems to be straight forward.
Keep in Filter: item Not = L category =A status =RFQ
You may start working on it and get back with if you are struck.

How to disable Wizard in Ad-hoc Query Designer

Hi everybody,
I am using the Bex Ad-hoc Query Designer in a web application. The users should be able to define their own queries, but just for one info provider. I selected the info provider in the properties of the ad-hoc query designer in the web template.
Now the users are able to create queries for all info providers with the wizard.
Is it possible to disable the wizard or to disable all buttons at the top of the ad-hoc query designer.
Thanks in advance,
Joerg

This can be done using the security for the Infoprovider, provide the users access to create queries only for that Infoprovider.

Bex Query Designer not using default browser

hello all, i have disabled my Internet Explorer from being my default browser, however, when i use the Bex query designer and test, it initiates my Internet Explorer, and not my default Safari browser.
does anyone know where this setting is made ?
thanks
g

Skype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Settings for SAP Portal start page from BEx Query Designer

Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen

Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

Restricting the Query Design Mode Toolbar in BEx

Hello,
Query Design Mode toolbar is available to Citrix users when using the BEx Analyser. THe client would like this switched off in the workbooks so users cannot see the make-up of the query. Does anyone one know who to carry this out?
Thanks,
Hema
Edited by: Hema Bharti on Jul 30, 2008 2:36 PM

Hi Hema,
To answer your question:
From query design toolbar, I do not see how you can see the make up of a query.
The design toolbar has been introduced to be able to make changes to the query as users need and save them for personal in Favorites or if they have authorization into roles.
As lomg as they do not have access to query designer, they cannot see make up of query.
There is no authorization to disable design toolbar.

Unable to Open Bex Query Designer

Hi Experts,
When i opening the BEx Query Designer i got an error message that " RFC error received: Connection Closed without message
(CM_NO_DATA_RECEIVED).
When i closed this message in the status bar it is giving message "Please Install Excel as viewer.
Any one help in this issue.
Thanks,
Satya

Hi,
The problem is with you GUI Installation, So uninstall the GUI in your system and then install GUI with selecting all EXCEL options and it will work.
Thanks
Reddy

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Error while trying to Open and Delete a BEx Query in Query Designer.

Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
Chandu

Arun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu

Message in BEx Query Designer Formula

Hi Experts,
I need to display message based on the value of the formula result. For Example:
If K.F1 =<2.5 Then <Message: ODD>
ElseIF K.F1 >2.5 Then <Message: Even>
Else
<Message: Determine the value>
EndIF
Thease above messages would be build in the formula column of BEx query designer
Thanks and really appreciate your response.
Regards,
Waseem

Hello,
I have done the same funtionality with the help of workbook.
May be experts can guide us how to display messages in the formula column of BEx query designer.
Thanks.
With regards,
Anand Kumar

Drilldown in BeX Query Designer

Hello,
I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
Warm Regards,
Debayan

Hi Debayan,
first of all, what is your requirement to create a drill down?
A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
1. Master data-Navigational Attributes
2. Master data- Hierarchies
3. Free characteristics
As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
Please share your exact requirement.
Hope this helps.
-Swati.

Division in bex query designer

Hi experts,
I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
I have tried the following in Bex query designer
-25124 %A -91248 = -0,02753%
(-25124/-91248)*100 = 0,02753
What might be the problem here?

Thanks again for your answer,
I will try to explain my report (requirement from the business user)
Actual (KF)----
Budget (KF)
Sales-- -91248--
-77153
FSP-- -25124--
-18918
Margin % -
(FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
Dim
Dim
Result
The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

Where to write IF THEN ELASE statements in BEX Query Designer

Hi All,
I need to write a formula in query designer...
saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
where can i write this logic to perform calculation ...
Thanks in advance..
ravi.p

hi chetan,
No its not work.. why because i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there any solution to solve this Problem...

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Difference between aggregation and calculation tab in BEx Query Designer

HI,
I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in the properties tab i found aggregation tab and calculation tab.
I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
I not able to used that Aggregation tab it is showing as a hidden fields...
can any one tell me whats the exact difference between these tabs and when we need to use which tab?
With Regards,
Thanesh Kumar.

Hi Thanesh Kumar,
I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
I could explain to you the difference between these two tabs.
For "calculation" tab, it changes the display of result and does not change the calculation logic.
It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting) is used for further formula calculation.
For "aggregation" tab, it changes the real calculation logic.
The system takes the setting as the aggregation rule for records.
The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
Average instead of summation when aggregating records. And the Average value will be taken for calculation
in further formulas or other calculations.
For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
a basic key figure. That should be the reason why you see it greyed-out.
Regards,
Patricia

Query disable status in bex query designer

Similar Messages

Maybe you are looking for