Query for posting date versus created date

Hi i would like a simple query (so i can use the query generator) to enable me to run a general ledger report that will include the date the transaction was created. This will be a usefull query to identify any prior month or prior year transactions. Currently if any balances change in the prior year it is impossible to find which ones they are. If the query can show the transaction and the created date it will be easy to identify those items pre dated back into previous months/year.
I have no experience in sql so am limited to use the query generator or can copy a query into the generator.
Would appreciate some help. To assist going forward i have created transaction codes for users to include in their journals so we can use the system general ledger report to identify them, however if the user leaves the code off we cannot detect them.
thanks judi
Edited by: Darius Heydarian on Mar 28, 2008 11:20 AM.

Hi Judi,
I generated a query that lists all your Journal Entry details, based upon the document.
SELECT
T0.TransId, T0.RefDate, T0.Memo, T1.Debit, T1.Credit, T0.UpdateDate, T0.CreateDate,T2.USER_CODE AS [CREATOR NAME],T2.USER_CODE AS [UPDATEOR NAME]
FROM OJDT T0 INNER JOIN JDT1 T1 ON T0.TransId = T1.TransId, OUSR T2
WHERE T0.UserSign = T2.USERID AND T0.UserSign2 = T2.USERID
1. open the query generator
2. Click the Execute Button. It trows an error. Please don't mind that.
3. Click the ICON - dEditText - Select completly and paste the above query.
Might be it will be helpful for you.
SAGAR

Similar Messages

How to get current date for posting date

hi,
how to get current date for posting date ? any sample code ?
Thanks

Hi......
Use
Select getdate()
for current date.......
Regards,
Rahul

MATERIAL DOCUMENTS FOR POSTING DATE TCODE ?

HI ALL,
CAN SOMEBODY GIVE ME THE MATERIAL
DOCUMENTS FOR POSTING DATE TRANSACTION CODE.
THANKS,
KSR

Hi all,
For dispaly of Material Document we have Transaction Code : MB03,
this with the Document No & Year,
like wise for dispaly of Material Document for a date range i want to know the Tranasction Code.
Thanks

No Oracle SSO support for POSTing data to protected resource [yet]

Hi,
I am using OHS infront of JBOSS and redirecting all requests from OHS to JBOSS after SSO Authentication.
Everything works fine except that I get 500 error when I try to post data from HTML form.
When i click on a button on a JSP page that submits page with the Form Post, the request goes to the OHS and is not getting forwarded.
OHS log shows the following
127.0.0.1 - - [11/Sep/2007:08:57:23 -0400] "POST /Sample/protected/standard.do HTTP/1.1" 500 788
Proxy_error.log shows the followin error
[Tue Sep 11 08:57:23 2007] [error] [client 127.0.0.1] [ecid: 1189515443:10.6.2.137:268:5568:74,0] \n[OSSO] E09: No Oracle SSO support for POSTing data to protected resource [yet].\n
Any idea?
Thanks
Srikar.

This error does no occur in our dev or test environments, only production. A workaround for us was to disable SSO by commenting the line to load it in the file $ORACLE_HOME/Apache/Apache/conf/httpd.conf. The line to comment out looks like: include "/u01/app/oracle/product/mid/Apache/Apache/conf/mod_osso.conf" where the /u01/app... above is the expansion of $ORACLE_HOME/Apache/Apache/conf/mod_osso.conf.
We do not use SSO for our application, so this is not a problem. I next plan to try to figure out why this behaves like this, so I can keep all the server configurations consistent.
HTH,
Mark

Help in Query for max date

Hi, How I can get the max(Gst_date) record of GRD. IF record of GRD has more than one record then I need the one max(GST_date) record of every GRD. Thanks.
create table #CRT (CRT numeric, GRD numeric, GST_Date datetime)
insert into #CRT values (7 ,1900,'01-01-2000')
insert into #CRT values (19,1900,'01-01-2002')
insert into #CRT values (24,1900,'01-01-2013')
insert into #CRT values (7 ,2100,'01-01-2010')
insert into #CRT values (19,2100,'01-01-2012')
insert into #CRT values (7 ,2200,'01-01-2012')
insert into #CRT values (19,2200,'02-02-2012')
I would like the following output from query. The following record is the max(GST_Date ) of every '''GRD'".
CRT   GRD   GST_Date
24    1900 01-01-2013
19    2100 01-01-2012
19    2200 02-02-2012

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. Everything you posted is wrong. You should follow ISO-8601 rules for
displaying temporal data. In fact is is required by ANSI/ISO Standards. You failed again. We need to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. You need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
Please, please learn why rows are not records. You do not even know what a key is or how to write a INTEGER NOT NULL(s, p) declaration. Allowing a table and column to have the same name is legal syntax and we regret not taking it out of the Standard. It is
stupid! How can a set also be an attribute of itself? But your DDL gave no attribute properties, as per ISO-11179.
Here is my attempt at repairs
CREATE TABLE CRT
(crt_something INTEGER NOT NULL,
grd_something INTEGER NOT NULL,
PRIMARY KEY (crt_something, grd_something),
gst_date DATE NOT NULL);
Here is how we write an insertion statement; you are still using Sybase syntax! Why did you pick the most ambiguous, non-ANSI date display format?
INSERT INTO CRT
VALUES
( 7, 1900, '2000-01-01),
( 7, 2100, '2010-01-01'),
( 7, 2200, '2012-01-01'),
(19, 1900, '2002-01-01'),
(19, 2100, '2012-01-01'),
(19, 2200, '2012-02-02'),
(24, 1900, '2013-01-01');
>> How I can get the MAX(gst_date) record [sic] of grd_something. If record [sic] of grd_something has more than one record [sic] then I need the one MAX(gst_date) record [sic] of every grd_something. <<
WITH X
(SELECT crt_something, grd_something, gst_date,
MAX(gst_date)
OVER (PARTITION BY grd_something) AS gst_date_max
FROM CRT)
SELECT *
FROM X
WHERE gst_date_max = gst_date;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Query for finding data during special holidays

Hi, i have a table for special holidays that looks like this:
PROFILE_DAY
VAR_DATE
REGULAR_HOLIDAY
1/1/2013
H_WEEK_THURSDAY
3/28/2013
H_WEEK_FRIDAY
3/29/2013
REGULAR_HOLIDAY
12/24/2013
REGULAR_HOLIDAY
12/25/2013
REGULAR_HOLIDAY
12/31/2013
And another table (LOAD_PROFILE_TEST), which contains LOAD_PROF1 values from (TIME_EQ) 0 to 24 at intervals 0.25 for (PROFILE_DAY) MONDAY to SUNDAY including REGULAR_HOLIDAY, H_WEEK_THURSDAY and H_WEEK_FRIDAY. All in all, this table contains 970 records (97 records between 0 to 24 with interval of 0.25 per PROFILE_DAY, with 10 distinct PROFILE_DAY).
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
REGULAR_HOLIDAY
11.47
0.25
REGULAR_HOLIDAY
11.27
0.5
REGULAR_HOLIDAY
11.3
0.75
REGULAR_HOLIDAY
11.08
0
MONDAY
11.27
0.25
MONDAY
11.33
0.5
MONDAY
11.18
Now, I have this query to update value of LOAD_PROF2 of the said table whenever parameters V_DATE_OUT & V_DATE_IN is entered:
UPDATE LOAD_PROFILE_TEST
     SET LOAD_PROF2 = LOAD_PROF1 + :LOAD_DIFF
     WHERE UPPER(PROFILE_DAY) IN (select UPPER(to_char(:V_DATE_OUT + (level-1), 'fmDAY'))
                   from dual
                   connect by level <= :V_DATE_IN - :V_DATE_OUT + 1
where :LOAD_DIFF is a certain pre-determined value.
This query works fine if i am trying to update regular days from MONDAY to SUNDAY. What i would like to do is to determine if the two parameter dates, V_DATE_OUT & V_DATE_IN would fall under any of the holidays on the first table LOAD_PROFILE_TEST, then update only those rows. For example, V_DATE_OUT = 12/02/2013, Monday and V_DATE_IN = 12/06/2013, Friday. The query above would update the values of LOAD_PROF2 for PROFILE_DAY - MONDAY to FRIDAY, corresponding to dates 12/02/2013 and 12/06/2013. If however, V_DATE_OUT = 12/23/2013, Monday and V_DATE_IN = 12/27/2013, Friday, this should update the rows corresponding to PROFILE_DAY - MONDAY for 12/23/2013, THURSDAY for 12/26/2013, FRIDAY for 12/27/2013, and REGULAR_HOLIDAY for the dates 12/24/2013 and 12/25/2013 since these two are included in the first table (table of holidays). This same scenario will work the same way when V_DATE_OUT and/or V_DATE_IN fall in the dates 3/28/2013 and 3/29/2013. All other dates not included in the table for special holidays will be treated according to the day they fall on (Monday thru Sunday). I hope my point is clear. Thank you in advance.

Thanks for your reply. Firstly, I am using Forms [32 Bit] Version 10.1.2.0.2 (Production). I will try to explain a little further but I don't know if i can give the exact details of the tables since this would be voluminous. First i have a table REG_HOLIDAYS, whcih contain the following:
PROFILE_DAY
VAR_DATE
REGULAR_HOLIDAY
1/1/2013
H_WEEK_THURSDAY
3/28/2013
H_WEEK_FRIDAY
3/29/2013
REGULAR_HOLIDAY
12/24/2013
REGULAR_HOLIDAY
12/31/2013
REGULAR_HOLIDAY
12/25/2013
Now i have another table LOAD_PROFILE_TEST which i will simplify just to show what i wanted to do:
CREATE
TABLE LOAD_PROFILE_TEST
TIME_EQ
NUMBER (5, 2),
PROFILE_DAY
VARCHAR2 (15 BYTE),
LOAD_PROF1
NUMBER (6, 2),
LOAD_PROF2
NUMBER (6, 2)
Here are the sample values of this table:
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
Monday
2
0
Tuesday
2.1
0
Wednesday
2.3
0
Thursday
2.5
0
Friday
2.2
0
Saturday
2.4
0
Sunday
2.3
0
Regular_holiday
1.9
0.25
Monday
2.1
0.25
Tuesday
2.1
0.25
Wednesday
2.4
0.25
Thursday
2.2
0.25
Friday
2.5
0.25
Saturday
2.3
0.25
Sunday
2.3
0.25
Regular_holiday
2.5
However, in the actual table, TIME_EQ will start with 0 until 24 with interval of 0.25 (i.e 0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, ...23.5, 23.75, 24). So for a PROFILE_DAY of 'Monday', there will be 97 rows corresponding to TIME_EQ of 0 to 24. The same is true for Tuesday, Wednesday until Sunday including Regular_holiday. All in all, this table would contain 776 rows. LOAD_PROF1 values are random values initally inputted with PROFILE_DAY and TIME_EQ.
The first goal is to UPDATE this table (LOAD_PROFILE_TEST) by updating the column LOAD_PROF2 by adding a certain parameter value, :LOAD_DIFF, say 0.1. Now, i will have two scenarios to show what i would like to happen. First, i have two date parameters :V_DATE_OUT and :V_DATE_IN.
First Case, V_DATE_OUT = 12/15/2013 (Monday); V_DATE_IN = 12/22/2013 (Sunday)
I will have this query to update said table:
UPDATE LOAD_PROFILE_TEST
       SET LOAD_PROF2 = LOAD_PROF1 + :LOAD_DIFF
   WHERE   UPPER(PROFILE_DAY) IN (select UPPER(
                                                                 to_char(
                                                                      :V_DATE_OUT + (level-1),
                                                                      'fmDAY'))
                                                                from dual
                                                 connect by level <=
                                                       :V_DATE_IN - :V_DATE_OUT + 1);
The output of this query would be:
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
Monday
2
2.1
0
Tuesday
2.1
2.2
0
Wednesday
2.3
2.4
0
Thursday
2.5
2.6
0
Friday
2.2
2.3
0
Saturday
2.4
2.5
0
Sunday
2.3
2.4
0
Regular_holiday
1.9
0.25
Monday
2.1
2.2
0.25
Tuesday
2.1
2.2
0.25
Wednesday
2.4
2.5
0.25
Thursday
2.2
2.3
0.25
Friday
2.5
2.6
0.25
Saturday
2.3
2.4
0.25
Sunday
2.3
2.4
0.25
Regular_holiday
2.5
Since, 12/15/2013 up to 12/22/2013 is from Monday to Sunday without having a particular day included in the first table, REG_HOLIDAYS, therefore all the rows with Monday to Sunday are updated.
Second Case, V_DATE_OUT = 12/23/2013 (Monday); V_DATE_IN = 12/29/2013 (Sunday)
Take note that 12/24 and 12/25 are included in the first table, REG_HOLIDAYS, therefore i need a query so that this would be my output afterwards:
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
Monday
2
2.1
0
Tuesday
2.1
0
Wednesday
2.3
0
Thursday
2.5
2.6
0
Friday
2.2
2.3
0
Saturday
2.4
2.5
0
Sunday
2.3
2.4
0
Regular_holiday
1.9
2.0
0.25
Monday
2.1
2.2
0.25
Tuesday
2.1
0.25
Wednesday
2.4
0.25
Thursday
2.2
2.3
0.25
Friday
2.5
2.6
0.25
Saturday
2.3
2.4
0.25
Sunday
2.3
2.4
0.25
Regular_holiday
2.5
2.6
As can be seen, since 12/23/2013 up to 12/29/2013 is from Monday to Sunday, rows with Monday upto Sunday should be updated, HOWEVER, since 12/24 and 12/25 which falls on a Tuesday and a Wednesday also were declared as holidays (included in the REG_HOLIDAYS table), instead of updating rows with PROFILE_DAY of Tuesday and Wednesday, the query should instead update rows with Regular_holiday as PROFILE_DAY and leave as is the rows with Tuesday and Wednesday. Additional note, days declared in the REG_HOLIDAYS table with PROFILE_DAY of Regular_holidays are treated as DISTINCT as in the case of 12/24 and 12/25.
The query you gave me gives the correct value if the involved days between V_DATE_OUT and V_DATE_IN is from Monday to Sunday only, otherwise it always gives Regular_holiday only regardless of the other dates queried. As in the first case above, it would give Monday to Sunday (correct) but for the second case, it will only give Regular_holiday, the other days (Monday, Thursday, Friday, Saturday and Sunday) was not outputted.
I hope this became clearer since i will still be needing this for another query which i will inquire again after resolving this issue. Thanks a lot for your help.

Validation for posting date.

hi,
i am creating a validation for fb01 where the posting date should not be less than the posting date for last document posted for same doc type.
we have assigned different number ranges for different a set of document types.
From which table can i get the data regarding number ranges used for particular doc type or group of doc types.
for example i need the nyumber range assigned to doc type 'SA' and the last doc no. assigned to a document.
Regards,
Tarun Bahal

i have checked FBN1.... i beleive its for creating number ranges.....
how do we find out which range is assigned to which doc type.
Regards,
Tarun

Validation for posting date is less than 7 days of current date

Hi
I want to create a validation wherein system will validate every entry that whether posting date is less than 7 days of current date. If it is than check in a set is that user id available if not than show error message.
If someone have any idea on this logic pls share with me.
Regd
Shiv

Hi,
That's certainly possible via usual OB28 validation. Define your prerequisites for the posting date (you will have to do it via user-exit (bkpf-budat greater then sy-datum less 7 days) , and check whether the user is in the set.
Regards,
Eli

Master data time dependant attribute in query for several dates

Hello all,
I need to create a query to display prices for a material in different periods.
The user will enter a period interval. For each period, they want to know the material price the last day of that period.
Material price is a time-dependat attribute of material, and I created one formula variable to display it. The problem is the using the key-date of the query only works for a date, but not for severals.
Is there any other way to do it?
If not, the only solution I find is to have in the infoprovider the prices that I need, but I don't think this is a good practice.
Any suggestions?
Thanks!

I have just seen something: in fact the created lines are:
Key1 Compound1 fromdate todate attr1 attr2
0001 L 01.01.1000 01.01.2006 <empty
so as you can see, the right interval is created but the attributes are not up to date.
Cheers.
Cyril.

Query for FormSubmit data by ID via the SOAP API

When I submit a form entry via the SOAP API request 'Create' it get an ID as well as the Form Type data in return:
<CreateResponse xmlns="https://secure.eloqua.com/API/1.2">
<CreateResult xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
       <CreateResult>
            <EntityType>
                 <ID>21</ID>
                 <Name>aherghaewForm</Name>
                 <Type>Form</Type>
            </EntityType>
            <Errors/>
            <ID>3</ID>
       </CreateResult>
</CreateResult>
</CreateResponse>
However, I can't seem to query for that ID. When using the request 'Query'
<ns:Query>
<ns:eloquaType>
       <ns:ID>21</ns:ID>
       <ns:Type>Form</ns:Type>
</ns:eloquaType>
<ns:searchQuery>ID='3'</ns:searchQuery>
<ns:pageNumber>1</ns:pageNumber>
<ns:pageSize>20</ns:pageSize>
</ns:Query>
I receive the following Error:
The search query you provided is invalid: 'id' is invalid.
As the field 'ID' is not part of the FieldValueCollection, this outcome is not unexpected, but unfortunate, as it would greatly simplify querying for data that was just submitted. Querying for a field that is part of the FieldValueCollection delivers correct results.
Is there a way to do just that, or do i have to follow another approach to retrieve FormSubmit data?
Thanks,
Felix

OK. I see column X logic now:
SQL> select id,
2          name,
3          case when instr(sys_connect_by_path(id,',') || ',',',4,') > 0 then 'X' else 'Y' end x
4    from worker
5    start with id in (
6                      select id
7                        from worker
8                        where boss_id is null
9                        start with id = 4
10                        connect by prior boss_id = id
11                      )
12    connect by prior id = boss_id
13 /
        ID NAME                             X
         1 Mennan                           Y
         2 Ahmet                            Y
         3 Akin                             Y
         4 Ayse                             X
         5 Aylin                            X
         6 Selim                            Y
6 rows selected.
SQL>SY.

Details on data types for posting data to DB2 on AS400 from XI

Hi
We have a scenario in which we post data from XI (3.0, SP23 ) to DB2 on AS400 and we are using jdbc adapters ( jdbc drivers from IBM deployed on XI J2EE server as per SAP's instructions )
On AS400-DB2, there are two files F1 and F2 that we have to update in a particular library L1 - on a server S1. Each of the two files has a single field with the same name as that of the file.
I have the following questions :
1. How do we construct/specify the data type in order to convert XML from XI to the sql that DB2 needs - I do understand there is a standard data type structure used to convert XML to sql calls when we use JDBC receiver adapter type communication channel. Do we use the same for posting XML data from XI to DB2 too ?
2. What is the url for the jdbc driver - to connect to DB2 on AS400 ?
Please share experiences of XI -- > posting to DB2 using JDBC.

Used standard xml -->SQL constructs

Trouble writing Query for Pivoting data from a table

I am having a little trouble writing a query for converting the below table data into a pivot data. I am trying to write a query for which if I give a single valid report_week date as input it should give me the data for that week and also provide two extra columns, one which gives the data of last week for the same countries and the second column which gives the difference of numbers in both the columns(i.e. COUNT - COUNT_LAST_WEEK).
REPORT_WEEK     DIVISION     COUNT
9/26/2009     country1     81
9/26/2009     country2     97
9/26/2009     country3     12
9/26/2009     country4     26
9/26/2009     country5     101
10/3/2009     country1     85
10/3/2009     country2     98
10/3/2009     country3     10
10/3/2009     country4     24
10/3/2009     country5     101
10/10/2009     country1     84
10/10/2009     country2     98
10/10/2009     country3     10
10/10/2009     country4     25
10/10/2009     country5     102
For example, if I give input as 10/10/2009, the output should be as give below.
REPORT_WEEK     DIVISION     COUNT     COUNT_LAST_WEEK     DIFFERENCE
10/10/2009     country1     84     85     -1
10/10/2009     country2     98     98     0
10/10/2009     country3     10     10     0
10/10/2009     country4     25     24     1
10/10/2009     country5     102     101     1
For example, if I give input as 10/3/2009, the output should be as give below.
REPORT_WEEK     DIVISION     COUNT     COUNT_LAST_WEEK     DIFFERENCE
10/3/2009     country1     85     81     4
10/3/2009     country2     98     97     1
10/3/2009     country3     10     12     -2
10/3/2009     country4     24     26     -2
10/3/2009     country5     101     101     0
Can anyone please shed some light on Query building for the above scenarios.
Thank you
SKP
Edited by: user11343284 on Oct 10, 2009 7:53 AM
Edited by: user11343284 on Oct 10, 2009 8:28 AM

I assume there is no gap in report weeks. If so:
SQL> variable report_week varchar2(10)
SQL> exec :report_week := '10/10/2009'
PL/SQL procedure successfully completed.
with t as (
           select to_date('9/26/2009','mm/dd/yyyy') report_week,'country1' division,81 cnt from dual union all
           select to_date('9/26/2009','mm/dd/yyyy'),'country2',97 from dual union all
           select to_date('9/26/2009','mm/dd/yyyy'),'country3',12 from dual union all
           select to_date('9/26/2009','mm/dd/yyyy'),'country4',26 from dual union all
           select to_date('9/26/2009','mm/dd/yyyy'),'country5',101 from dual union all
           select to_date('10/3/2009','mm/dd/yyyy'),'country1',85 from dual union all
           select to_date('10/3/2009','mm/dd/yyyy'),'country2',98 from dual union all
           select to_date('10/3/2009','mm/dd/yyyy'),'country3',10 from dual union all
           select to_date('10/3/2009','mm/dd/yyyy'),'country4',24 from dual union all
           select to_date('10/3/2009','mm/dd/yyyy'),'country5',101 from dual union all
           select to_date('10/10/2009','mm/dd/yyyy'),'country1',84 from dual union all
           select to_date('10/10/2009','mm/dd/yyyy'),'country2',98 from dual union all
           select to_date('10/10/2009','mm/dd/yyyy'),'country3',10 from dual union all
           select to_date('10/10/2009','mm/dd/yyyy'),'country4',25 from dual union all
           select to_date('10/10/2009','mm/dd/yyyy'),'country5',102 from dual
select max(report_week) report_week,
        division,
        max(cnt) keep(dense_rank last order by report_week) cnt_this_week,
        max(cnt) keep(dense_rank first order by report_week) cnt_last_week,
        max(cnt) keep(dense_rank last order by report_week) - max(cnt) keep(dense_rank first order by report_week) difference
from t
where report_week in (to_date(:report_week,'mm/dd/yyyy'),to_date(:report_week,'mm/dd/yyyy') - 7)
group by division
order by division
REPORT_WE DIVISION CNT_THIS_WEEK CNT_LAST_WEEK DIFFERENCE
10-OCT-09 country1            84            85         -1
10-OCT-09 country2            98            98          0
10-OCT-09 country3            10            10          0
10-OCT-09 country4            25            24          1
10-OCT-09 country5           102           101          1
SQL> exec :report_week := '10/3/2009'
PL/SQL procedure successfully completed.
SQL> /
REPORT_WE DIVISION CNT_THIS_WEEK CNT_LAST_WEEK DIFFERENCE
03-OCT-09 country1            85            81          4
03-OCT-09 country2            98            97          1
03-OCT-09 country3            10            12         -2
03-OCT-09 country4            24            26         -2
03-OCT-09 country5           101           101          0
SQL> SY.

FMS required for Posting Date + 4 week excluding weekends

Hi,
I have a UDFas U_FRDWDT in which I want that if the Sales Order posting date is 15/12/2010 then this udf should automatically update + 4 weeks EXCLUDING Fridays and Saturdays which is there in the 4 weeks hence the result should be e.g 27/01/2010 which is excluding Fridays and Saturdays.The requirement is as such that Friday and Saturday are holidays for the company and the client wants to have this field updated on + 4 weeks basis but it should not consider Friday and Saturday as its holiday.
Also note in SAP base setup Holiday Master Weekend is set from Friday to Saturday. Will this help in any way of updating the field or through formated search.
Kindly advise what best solution can be given
Regards,
Soni

Hi Gordon,
I used this formatted search and seeing some discripencies as if lets asume the Sales Order Posting Date is 15/12/2010 then 4 weeks should come in the udf means excluding friday and saturday and the date which is coming as per fms is 12/01/2011 but i guess the fms should show 25/01/2010 which is 4 weeks ( no of days 30 ) excluding friday and saturday. I think your fms is just brining 22 working days and then its showing 12/01/2010.
I want the fms to consider friday and saturday as holiday and then give me 4 weeks.
I hope i am clear to my requirement and able to make you understand.
Regards,
Soni

Idoc for Posting data to FB01 transaction

Hi,
In my Interface, i need to post data to a SAP FI system->FB01 transaction from XI. The scenario is nonSAP system->XI->SAP FI.So what are the possibilites to post data to SAP FI->FB01 transaction. Is there any Idocs for that or any other method.
Please share your ideas..Ponts will be rewarded for good inputs...
Thanks

Hi,
You need to get the file with the required format from the sender system and there shouldn't be any mapping in PI. Also please check the below link on how to get the file structure.
Re: File for 'RFBIBL00'
There is also a help for the RFBIBL00 program. Check this too.
http://help.sap.com/saphelp_45b/helpdata/en/35/a47e63763e0392e10000009b38f9b7/content.htm
The file should be placed in the ECC application folder and this program needs to be scheduled with that file path. If you are not able to get the file in the required format then you may need to go with the IDOC or BAPI solution.
~Vaas

MB5B - Closing Value for Posting Date inconsistently reported.

Greetings,
I am executing transaction MB5B in ECC 6.0 for a single Posting Date in November of 2008. The parameters include 3000 ROH materials (selected by MIN/MAX material number ranges) in 30 plants within 3 different companies (selecting all by leaving these values blank). The problem I am having is that I am getting a different total USD valuation each time I run the report. If I run the report 3 times in 15 minutes I will get 3 different USD totals. Difference is usually small (.006%).
At times I will get exact matches. Yesterday, 3 out of 5 runs were exactly the same result.
Can anyone advise what might be causing this variability? And how it might be corrected. Either by using different selection parameters of another more reliable transaction code.
Regards,
Joe

Hi,
If you post in the previous period and the material price in the previous period differs from the current price, the system generates a stock posting and revaluation line with the same value but opposite signs.
You can ran an inconsistency check report using SE16: MBEW
Go through SAP Note 518368
Bye,
Muralidhara

Query for posting date versus created date

Similar Messages

Maybe you are looking for