Query in reg the use of ResourceBundle and Properties in my webapplicatiom.
I have property file which have some values. I use ResourceBundle to get values by passing the key to getString method. But the problem for me is that my webapplication is running in tomcat server. When i add a new value in property file i could not get that value. I want know which method is used to reload the property file which has changed without restarting my tomcatserver.
Regards
Richard
Question 1: Yes I have done this.
Question 2: Yes, but you would need to configure you DHCP server to hand out the additional option 150 address.
Question 3: Yes the .xml files for phones will be. The default firmware will be as well. If you upgraded firmware from the default you will need to upload it on that server as well.
Question 4 :If the TFTP server does not respond, the IP phone falls back to the last
used configuration stored in NVRAM.
Similar Messages
-
Query to get the details of Blocking and deadlock occurred for the Day
Hi,
I need a query to get the details of blocking and deadlock occurred for the day.You havent specified which version of SQL you are using which makes it difficult to give a solution. Assuming its latest versions , by default SQL Server (in any versions) doesnt track blocking information.
You need to run some kind of queries/traces to capture blocking. The same goes with Deadlocks where majority of the DBA's enable trace flag 1222/1205 when they suspect deadlocks happening.
Check this link -
http://dba.stackexchange.com/questions/10644/deadlock-error-isnt-returning-the-deadlock-sql/10646#10646
This link gives code to get historic deadlock information. I havent used it , I just googled to get that.
That being said if you are looking for something to capture for the future check the below links.
Check these links on how to setup extended events to capture deadlock and blocking.
http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/12/21/an-xevent-a-day-21-of-31-the-future-tracking-blocking-in-denali.aspx
http://blogs.msdn.com/b/sqlserverfaq/archive/2013/04/27/an-in-depth-look-at-sql-server-memory-part-2.aspx
http://blogs.technet.com/b/mspfe/archive/2012/06/28/how_2d00_to_2d00_monitor_2d00_deadlocks_2d00_in_2d00_sql_2d00_server.aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Query to find the list of workbooks and worksheets assiciated to those book
Hi Gurus,
Could you help me with the tables / Query to fetch the list of workbooks and associated worksheets names as welll.
Thanks in advance!!
Rgds,
SantoshHi Santosh
The whole point of the STATS table is to allow you to query performance, who did what and when. The database itself does not keep such statistics so if you disable Discoverer's method of capturing these you have no way of knowing who did what and when.
Without this it is impossible to say. I would strongly recommend you enable the capturing of statistics.
The reason you cannot directly query a WORKBOOK to determine what WORKSHEETS are associated with it is because that information is stored as binary information and not in SQL format.
Discoverer 10g has the capability of providing detailed information on the EUL. This feature is not offered "out of the box" but can be easily enabled.
The EUL Administrator can enable the feature by completing the following steps (see also MOS Note 556932.1):
1. Log on to SQL*Plus as the Discoverer Administrator on the machine where Discoverer Administration Edition is installed.
2. Execute the EUL5.SQL script found in the *$ORACLE_HOME\discoverer\util* directory. (This script will create the necessary database objects.)
NOTE: If you are using an Oracle Applications mode EUL, you must also run the eul5_apps.sql file in the $ORACLE_HOME\discoverer\util directory. This script must be run as the EUL owner, and not the Oracle Applications SYSADMIN user.
4. Exit SQL*Plus and log on to the Discoverer Administration Edition product (as the EUL Administrator).
5. From the menu bar, select File | Import.
6. Import the EUL5.EEX file from the ORACLE_HOME\discoverer directory. Once the EUL import is complete, a new business area will be created and visible called The Discoverer V5 EUL. This is the business area that provides the details on the EUL.
EUL Management Workbooks for Discoverer Administrators
The EUL5.EEX file also imports four pre-built Discoverer workbooks. These workbooks are automatically saved to the database during the EEX import and can be executed in Discoverer Plus, Viewer or Desktop:
EUL Workbook Management - shows which workbooks are shared with which users. Examine worksheets to find the folders, items, joins and conditions they depend upon.
EUL Access - This Workbook indicates if a current EUL exists in this users schema. It also displays the EUL's in other user schemas that this user can access.
EUL Query Statistics - Find out which workbooks and worksheets are being used by whom. Examine users ad-hoc queries.
Lineage - Hyper Drill from Discoverer to find a folder or Items Lineage in Oracle Warehouse Builder. To enable the Hyper drill, you will first need to run the Lineage.sql script.
The Discoverer Administrator can use the pre-built workbooks or build their own EUL management workbooks by using the Discoverer V5 EUL business area.
Best wishes
Michael -
Problem in creating and updating of material by the use of bapi and bdc
Hello All,
I am using bapi (BAPI_MATERIAL_SAVEDATA ) and than bdc to create and update classification data of material.
I am facing a problem.
1) firstly I am creating material by the use of bapi and than after creation i want to update classification data for taht perticular material .
2) To update classification data i am using bdc . while at the time of updating material through bdc system showing me error that material is currently locked by user (my login name ).
Please suggest what to do.
Tkank you
With Regards
Shantanu ModiWhen u update/create data it takes sometime to commit. So after using BAPI
give 10 minutes wait in ur program before updating classification data.
you can write like
wait up to 20 seconds.
and update the classification. -
What is the use of EIN_FEDERAL and EIN_STATE_LOCAL fields in Voucher header record (PeopleSoft AP) ? And where can we check record field related information in PeopleBooks ?
Hi User,
The best place to search for questions like this one is OTN, Oracle Technology Network. If you have any question about CLOUD and partnering with Oracle we will be more than glad to help! Thanks. -
What is the use of inherit and push in FR
Hi Gurus
1. what is the use of inherit and push option while providing report permission in Financial Reporting?
regards
SarillaYes, but you have no way of knowing whether what you find on Google is right or not.We can say its right as long google places oracle docs at the top when you type some thing related to oracle.
I aways see something else on the top. I dont believe people stopped hitting or reading or searching oracle docs.
Regards,
G. -
What is the use of command and alternate in flowlogic
what is the use of command and alternate in flowlogic in SMARTFORMS?
Yes, but you have no way of knowing whether what you find on Google is right or not.We can say its right as long google places oracle docs at the top when you type some thing related to oracle.
I aways see something else on the top. I dont believe people stopped hitting or reading or searching oracle docs.
Regards,
G. -
Whats the use of doget and dopost
hi
whats the use of doget and dopoast when same work can be done by sevice alone?
Message was edited by:
pooja_k_onlineTry looking at the Tomcat implementation of HttpServlet.service() method. I have pasted it below, if you look at the service() method all it does is to check for the method and call the appropriate method. It is not recommended to override the service method. It is a good practice to only override the getXXX() methods.
protected void service(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
String method = req.getMethod();
if(method.equals("GET"))
long lastModified = getLastModified(req);
if(lastModified == -1L)
doGet(req, resp);
} else
long ifModifiedSince = req.getDateHeader("If-Modified-Since");
if(ifModifiedSince < (lastModified / 1000L) * 1000L)
maybeSetLastModified(resp, lastModified);
doGet(req, resp);
} else
resp.setStatus(304);
} else
if(method.equals("HEAD"))
long lastModified = getLastModified(req);
maybeSetLastModified(resp, lastModified);
doHead(req, resp);
} else
if(method.equals("POST"))
doPost(req, resp);
else
if(method.equals("PUT"))
doPut(req, resp);
else
if(method.equals("DELETE"))
doDelete(req, resp);
else
if(method.equals("OPTIONS"))
doOptions(req, resp);
else
if(method.equals("TRACE"))
doTrace(req, resp);
} else
String errMsg = lStrings.getString("http.method_not_implemented");
Object errArgs[] = new Object[1];
errArgs[0] = method;
errMsg = MessageFormat.format(errMsg, errArgs);
resp.sendError(501, errMsg);
} -
What is the use of with and without marker update?
what is the use of with and without marker update?
Hi,
Marker Update Updates the stock values and NO Marker does not.
Generally BX upload has to be compressed with MU and BF(and UM) delta init has to be compressed with NO MU because Stock was updated with BX. And delta loads of BF and UM has to be compressed with MU because these brings new Material movements which will has to give effect to stock.
With rgds,
Anil Kumar Sharma .P -
Problem using Cipher*Stream and Properties
I ran into a tricky problem using CipherInputStream, CipherOutputStream and Properties. I don't seem to find where I'm doing something wrong here.
I have something like this:
encCipher; // and already initiated ENCRYPTION Cipher
FileInputStream fis = new FileInputStream( "textfile.properties" );
// textfile is an unencrypted text-file containing:
// prop1=valueprop1
// prop2=valueprop2
// prop3=valueprop3
Properties props = new Properties();
props.load( fis );
FileOutputStream fos = new FileOutputStream( "enctextfile.properties" );
CipherOutputStream cos = new CipherOutputStream( fos, encCipher );
props.store( cos );Up until here, no problems right? I get the contents from the source text-file, and then write with to the CipherOutputStream, which gives me an encrypted version of the original file.
Then: (assume decCipher is an already initiated DECRYPTION Cipher)
FileInputStream fis = new FileInputStream( "enctextfile.properties" );
CipherInputStream cis = new CipherInputStream( fis, decCipher);
Properties props = new Properties();
props.load( cis );
props.list( System.out ); // this line should produce the exact same contents as the original source file right?But the output has one property less, as if in some part of this process, data has been lost. But where? Am I missing something?
Thanks in advance for any hints,
ChrisYes. Just now I realize I must close it for all the
buffer to be written out to the file.:-) My crystal ball is working well today! -
Revision: 2200
Author: [email protected]
Date: 2008-06-24 07:46:04 -0700 (Tue, 24 Jun 2008)
Log Message:
The main package will now also include the ja swc's and properties files.
-it will not include the samples, these will still be in the ja zip
bug:http://bugs.adobe.com/jira/browse/SDK-15852
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15852
Modified Paths:
flex/sdk/branches/3.0.x/build.xmlHi,
First up thanks for helping out, I really appreciate it.
Is there a way to change that or should I simply add the file to the Classpath?
The config file at present sits in c:\Temp\ESFGFL\servicelayer\config\maysqlconfig.properties with the code in the servicelayer directory.
My classpath is set as .;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\Program Files\Java\jre6\lib\javamail-1.4.2\mail.jar
What do I need to change here? Ultimately te code will be on a servera nd so will the config file but learning some lessons by testing locally is proving invaluable.
Thanks again for your help
nathj -
Bad performance due to the use of AGO and TO_DATE time series functions
Hi all,
I'm building an OBI EE Project on top of a 1TB DW, and i'm facing major performance problems due to the use of the AGO and TO_DATE time series functions in some of the Metrics included on the reports. I discovered that when a report with one of those metrics is submited to the DB, the resulting query/explain plan is just awful!... Apparently OBI EE is asking the DB to send everything it needs to do the calculations itself. The CPU cost goes to the roof!
I've tried new indexes, updated statistics, MV's, but the result remains the same, i.e., if you happen to use AGO or TO_DATE in the report you'll get lousy query time...
Please advise, if you have come across the same problem.
Thanks in advance.Nico,
Combining the solution to view the data in dense form (http://gerardnico.com/wiki/dat/obiee/bi_server/design/obiee_densification_design_preservation_dimension), and the use of the lag function (http://gerardnico.com/wiki/dat/obiee/presentation_service/obiee_period_to_period_lag_lead_function) appears to be the best solution for us.
Thanks very much. -
Whats the use of read_text and save_text in sapscript
in the sap script we have standard texts so10 by using this we can use large texts then wats the use of those function modules.
how to change the standard sap script bu using subroutine.can any one give brief idea where to pass parameters in subroutine in program or else in form.hi sarath,
read_text and save_text
check this thread..
Re: Read_text and save_text
how to change the standard sap script bu using subroutine.can any one give brief idea where to pass parameters in subroutine in program or else in form.
: PERFORM MY_FORM IN PROGRAM ZPROGRAM
/: USING &VAR1&
/: USING &VAR2&
/: USING &VAR3&
/: USING &VARN&
/: CHANGING &VAR_OUT1&
/: CHANGING &VAR_OUTN&
in program zprogram.
FORM MY_FORM tables in_tab structure itcsy
out_tab structure itcsy.
data: varn like ....
read table in_tab with key name = 'VARN'.
if sy-subrc = 0.
move in_tab-value to varn.
endif.
read table out_tab with key name = 'VAR_OUTN'.
if sy-subrc = 0.
move <value> to ot_tab-value.
modify out_tab index sy-tabix.
endif.
ENDFORM.
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/803279454211d189710000e8322d00/frameset.htm
Message was edited by: Priya -
After downloading iOS 8.1.3, I lost the use of messaging, face time and shortly there after my e-mail. I changed and reset everything I could on my I-Pad... same result. It can't be my router or my provider, for my I-Pod touch works fine. Any suggestions? Thanks, Val
Hello there berczy,
As I understand it, you are not able to use iMessage, FaceTime or any email service on your phone. Saying you've tried everything would generally make me recommend that you restore the phone from a backup but that can take a long time, so without knowing exactly what steps you have taken, I would like for you to review the troubleshooting in the following article for FaceTime and iMessage:
If you get an error when trying to activate iMessage or FaceTime
And to troubleshoot the Mail app, use this article:
Get help with Mail on iPhone, iPad, and iPod touch
Thank you for using Apple Support Communities.
All the very best,
Sterling -
After downloading iOS 8.1.3, I lost the use of messaging, face time and shortly there after my e-mail. I changed and reset everything I could on my I-Pad... same result. It can't be my router or my provider, for my I-Pod touch works fine. Any suggestions? Thanks, Val
Hi berczy,
Thanks for the question. I understand that you are experiencing multiple issues with your iPad after updating. It sounds like you are on the right track, as all three of these tasks require an internet connection. To help isolate the issue further, are you able to open webpages in Safari? If not, we’ll need to troubleshoot the iPad’s network connection:
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
https://support.apple.com/en-us/HT204051
- Matt M.
Maybe you are looking for
-
HT4796 how do i transfer data from my external PC hard drive to my MAC?
MY PC died but i had previously backed it up to an external hard drive. i can't figure out how to transfer data, such as outlook address contacts, word files and photos, to my MAC. Help please!
-
I have the Adobe Reader x 10.0.1. Free version. I downloaded a PDF form and open the document but cannot fill in any of the fields. With the form opened I look at File/Properties/security which shows "Filling of the form fields": Allowed. I do not fi
-
Problem with loading dll in CrEme VM
Hi, I want to create an application for Pocket PC and I must user a dll. I use NetBeans 6 on my desktop and CrEme as CDC implementation. I write a CDC application which works fine on my PC, but in the Emulator (Windows Mobile 6) throw this error java
-
Function read_text for dispute management
We are in SAP R/3 enterprise 4.7. We are trying to find out how to get the text from Dispute Case Notes. I found CASE_GUID field in SCMG_T_CASE_ATTR table. Looks like there is correlation between this CASE_GUID field with TDNAME in STXH table. H
-
When I try running my web application from browser after deploying succesfully, I get following error.I checked web.xml & config.xml..they are welformed. Application cannot be started! Details: com.sap.engine.services.servlets_jsp.server.exceptions.W