Function read_text for dispute management

We are in SAP R/3 enterprise 4.7.  We are trying to find out how to get the text from Dispute Case Notes.  I found CASE_GUID field in SCMG_T_CASE_ATTR table.   Looks like there is correlation between this CASE_GUID field with TDNAME in STXH table.  However, I couldn't find the correct link.  As you know, when we run function READ_TEXT, this TDNAME will be used in Import Parameter-NAME. 
Do you know how to find out the correct TDNAME in STXH table for Dispute Case Management?
Thank you.
Daud Hadi

Hi Rich,
Thank you for the quick response.  Unfortunately, the problem is how to decode the TDNAME.  I thought there is a correlation between CASE_GUID field with TDNAME, however, I couldn't find the correct link.  Below is a snapshot of STXH table based on a dispute case note.  The Dispute Case note number is actually 32.  The Case_GUID is 3FC4501BDCF000BC000000000A360416.  So, I thought it must be the first 7 char.  However, it is not always the case.
Snapshot of STXH table:
MANDT     142
TDOBJECT     SCMG_CASE
TDNAME     3FC4501CDCF000BC000000000A36041620060330223414
TDID     0001
Language     E
TDTITLE     
TDFRELES     620
Created by     USHADIDA
TDFDATE     30.03.2006
TDFTIME     22:34:14
TDLRELES     620
Changed by     USHADIDA
TDLDATE     30.03.2006
TDLTIME     22:34:14
How to find out the correct TDNAME value in STXH table?
Daud Hadi

Similar Messages

  • Function Modules for Change Manager Tickets

    Dear all,
    I have the requirement to display some basic statistics about the number of change manager tickets that are currently open, that are assigned to a person and in proceesing state.
    I had a look into the system but could find a valuable hint on which function modules are available and which are even RFC enabled.
    So is there someone who has achieved this or does know how to access that information?
    I would be very happy about any hints.
    Thank you and best regards.
    Nicolas

    Hallo Nicolas,
    I had the same requirement and started looking into this. Essentially I used php to make RFC calls to SAP.
    there are at least 2 FM (they are both RFC enabled) you can use to extract service desk ticket data.
    They are:
    - CRM_DNO_SELECT_SERVICE_TRANS
    This FM has the service desk number as you see it in CRMD_ORDER or CRM_DNO_MONITOR
    The other FM is:
    - DNO_OW_GET_NOTIFICATIONS and report RNOTIFWL
    This will give you data for the notification
    You can use DNOH_OBJNR in the first FM and OBJNR in the second to join the two together.
    The only thing is that there is no selection screen to select the data within the FM. When you execute both FM you have to provide a variant - based on that variant the data will be picked up. The best thing is probably to setup a variant that will pick up all your tickets and have your rfc calling application compile the stats that you are after. Also the variant you use is not the on you would use in CRM_DNO_MONITOR you have to go the FM transaction and create the variant for it there.
    Hope it helps, ~p.

  • Creation of RMS ID for Dispute management system

    Hi All,
    I have went into Create RMS ID IMG config and selected S_AREA_CMG. Under RMS_ID node, i can see UDM_DISPUTE RMS ID. How can i copy this RMS ID and create a custom RMS id for my client. Any help in this regard will be highly appreciated.
    Thanks
    Rajanikanth

    Hi Minu,
    Simply follow SAP help as below;
    SPRO > "Create RMS ID"
    Activities
    You can use the RMS unmodified or create your own RMS. To create your own RMS, proceed as follows:
    1. Choose S_AREA_CMG.
    2. Choose S_AREA_CMG -> RMS_ID.
    3. In the context menu, choose Create Parameter Value.
    4. Enter the parameter value and the short description.
    BR,

  • Badi hitting twice...SCMG_BEFORE_VALID_C for Dispute Management ECC 6.0

    Hi,
    I have implemented the BADI
    SCMG_BEFORE_VALID_C for the transaction UDM_DISPUTE.
    I pop up some messages when a case is changed....But the problem is the pop up message comes twice.
    So the BADI is being called twice...
    Does any one know how to resolve this issue...
    Thanks,
    Chaitanya K

    Hi.
    Try to apply a concept of EXPORT and IMPORT allow follow.
    BADI calling.
    Data:      gv_flag_set type c,
                  gv_flag_get type c.
      gv_flag_set = 'X'.
    1.First time.
      Method A.
       /*begin of method
       IMPORT gv_flag_get = flag_set FORM MEMORY IS 'Z_ID1'.
      IF gv_flag_get IS NOT INITIAL.
       "Perform your statement here for first time
    ELSE.
      ENDIF.
       /*end the end of method
       EXPORT flag_set FROM gv_flag_set TO MEMORY ID 'Z_ID1'.
      Endmethod.
    2.Second time.
      Method A.
       /*begin of method
       IMPORT gv_flag_get = flag_set FORM MEMORY IS 'Z_ID1'.
      IF gv_flag_get IS NOT INITIAL.
       "Perform your statement here
    ELSE.
         "This is for the second time
      ENDIF.
       *end the end of method
       EXPORT flag_set FROM gv_flag_set TO MEMORY ID 'Z_ID1'.
      Endmethod.
    Sayan,
    Thanks for your reply.
    I couldn't understand what should be the value of flag_set and it should also be declared right...
    and u hve mentioned gv_flag_get is not initial. Then u should have a value X then only the first time it executes....
    Thanks,
    Chaitanya K
    Edited by: chaithanya k on Jan 6, 2009 3:12 PM

  • Function Profile Dispute Management

    Hi Can somebody tell me what is function profile in dispute management. I am not asking for the definition but I need to understand what effect functions in function profile, Push button, seperator after push button, sequence number etc. have on our dispute case.
    Thanks
    Nik

    Hie Nik
    This may be a late response, but anywhere just incase you still looking for an answer, a function profile is a set of buttons that are displayed by means of the attributes. These buttons perform a function, eg Save, Display/Change, Delete, Print etc.Case Management will allow you to define which function you would like to use and you can specify on which number it should come usine the sequence number, eg 1 can be save, 2 can be delete, 3 can be Create Correspondence etc, then teh Seperator simply mention whethere there should be a seperator before any given function.
    With this function profile you then assign it to a case type, so that when in your case you can perform any of the function that you would have inoute inyour configuration, hope this helps.

  • Function module for Mass uploadnotifications in Quality Management

    Hi  Experts,
    I need function module for quality management which MASS UPLOAD THE QM NOTIFICATIONS.
    Thanks

    Hi,
    For updation use BAPI_QUALNOT_ADD_DATA.
    Hope it helps.
    Regards
    Hiren K.Chitalia

  • Dispute management reporting

    Hi all,
    i'm doing some research into the disputes management module for my company who wish to use it to manage around 7500 claims per month.
    I'm trying to identify what the reporting is like from SAP, but i cant see any standard reports for disputes management, only comments to say that the data is extracted to BI as standard.
    Is there no dispute management reporting directly out of SAP (ECC6)?  Alternatively does anyone have experience writing reports in SAP for disputes management cases?
    Thanks
    Phil

    The main area for dsipute management reporting is within the BI module.
    That is not to say there are not standard ERP reports - however they are very basic.
    The main report can be run by user, customer, reason code and status with drill down functionality into the dispute.
    The volume of disputes would mean you would ideally be suited to BI, as you would want summary reports.
    There is standard BI Business Content - but normally a client would enhance this to bring in billing and accounting information.

  • FSCM Dispute management workflow

    Hi All, I have activated the workflow WS01700044 for dispute management email and notifications.
    event:  NONPROFESSIONALUSERSET
    This event get triggered when dispute case is created or changed.
    Now my issue is when I create a case, it is sending a mail to processor of case. But if I change the processor in t-code UDM_DISPUTE, it trigger the event and workflow but it is ending with error because field RECIPIENT in event come blank hence email step goes into error.
    I have checked all email Ids are maintained in respective user profiles. Even it sends mail in create.
    IF anyone know how to correct it, plese let me know.
    Thanks,

    Hi -
    Even if you HAVE maintained an email address in the user profile, emails are not automatic.
    Check with your Basis person to make sure outgoing emails aren't blocked.
    You should also check the workflow status from within the case itself. The 044 workflow is pretty clear on showing that there will be a red box because a workflow event failed. Check there and report back here.
    D

  • Function module for to Create fund/Grant management Derivation rules

    Hi All,
    Is there any function module for to create a derivation rules for fund/Grant management.
    Thanks in Advance.
    Nara.

    Hi,
    Please try with FM KED0_CREATE_DERIVATION_TABLE
    Please let me know if you have some issues,
    Regards,
    Lijo Joseph
    *Assign Points ifuseful.

  • BAPI/Function Module for tx PR05(Travel Expense Manager)

    Hi All,
    I am searching for BAPI/Function Module for tx PR05(Travel Expense Manager).
    Thanks.

    Hi All
    Thanks for your input.
    I choose BDC option for PR05 maintain. As the BAPIs are calling PR01.
    -RP

  • Activating Business set function for Campus management

    Hello All,
    I am trying to activate the business set function for Campus management but ending up in error
    Invalid Status
    Business function FICAX is not in target business function set
    We are in Ehp4 and its IDES system. Do i miss any settings / configurations
    Regards,
    Anand

    Hello Tina,
    Kindly regret for delay in reply and I have sent you the mail.
    Regards,
    Anand

  • Is there a new extractor for the new EHP3 Dispute management module?

    Hello all,
    Our R/3 colleagues have been installing the EHP3 on their system, to gain access (among other functionalities) to a new Dispute Management module.
    Now we want to extract this data to the Business Warehouse and consider the use of a generic extractor. Before developing it, we would like to make sure there is no standard extractor for this.
    Does anyone know if SAP provided a corresponding extractor?
    Thanks in advance for the answers.
    Best Regards
    Manuel SCHAFF

    Calendars which have been moved to MobileMe (and which therefore can be viewed by other devices logged in there) cannot be published to a Web Page URL as was possible before.
    Calendars under 'On My Mac' can be published as before, but will not sync to MobileMe.
    MobileMe Calendars can shared with other selected MobileMe users, with writing privileges if so chosen; and can be made available publicly in read-only form but can only be viewed in a CalDAV reader such as iCal itself or Google Calendar. Details here:
    http://docs.info.apple.com/article.html?path=MobileMe/Help/en/mm6b1a9479.html

  • Is there a way to hide some reason codes in dispute management without deleting?

    Within SAP Dispute management (UDM_DISPUTE) we would like to remove some of the available reason codes in the drop down on the search screen and available to assign drop down, but not physically delete them.  Is there a way to do this? 
    I know if I physically delete them out of the Reason code list (SPRO -> FSCM -> dispute management -> Dispute Case Processing -> Case types -> Create Values for Attribute "Reason") then if an old dispute case that used that reason code is displayed, the four digit number code will be displayed rather than the description.  So we would prefer to not physically delete the code / description from the reason codes but somehow make them non-display, or inactive. 
    Any thoughts on this?

    Hello Stephen,
    you may consider the functionality "personal list", putting all valid reason codes in and leaving out those you do not want to show. Maybe your Authorisation / Security Team can also help you performing this exercise for all affected users at once.
    Regards,
    Christoph

  • FSCM SAP 5.0 Dispute Management-record and case model-dispute cas model.xml

    Hello,
    I am using the W21: Dipsute Management Building Block Configuration Guide.doc
    At the first step, creating a case record model, the configuration guide refers to a file:
    6.     In the toolbar of the Modeler in the upper middle section select Model >> Load local file and open the file - dispute case model.xml -.
    I do not have this file available, does anyone have any idea how to resolve this?
    -     How can I obtain this file
    -     Is this file necessary, to create a case record model
    Thanks for your help.
    Kind regards,
    Santiago

    Hi Santiago,
    This was tricky for me too.  Execute tran UDM_DISPUTE.  Change your RMS ID (left side, middle box, icon with two overlapping squares) to UDM_DISPUTE. In the same box, expand Record and Case Record Models.  Double click on Modeler for Case Records in Dispute Management.  This brings up a search box.  Click on execute Search. Double click on the Dispute Management entry in the lower box.  This gives you the standard model.  You can download this, using the Other Model Functions.
    Then change to your custom RMS ID (ex. ZUDM_DISPUTE).  Expand Record and Case Record Models.  Right click on Modeler for Case Records in Dispute Management and select Create.  Then upload the standard model into your RMS.  Then you can customize the model as you wish.  Hope that helps! 
    Beth

  • Could you explain the work flow logic in dispute management

    Hello,
    Could any one explain the the work flow logic in dispute management .
    When will the first work flow initiate and who will recive the first notification and what are the action he/she usually perform. How it trigger to next level and what is the events consider for the next work flow trigger.
    If some one could share a real work flow example in line with Dispute management will be great...
    regards
    Sibichan

    Dispute management workflow will help to automate business process.
    When some action or information is expected form individual or department then
    Workflow can be triggered on editing some field in dispute case and workitem is send
    to individual or group, So that they can respond to it.
    We can use function email notifications to speed up the process.
    Based on organizational needs triggering events can vary.
    Regards,
    Raju

Maybe you are looking for