Query, infoset and Logical database tuning?

Hi, All:
I created infoset z_infoset based on logical database DDF.
then based on infoset z_query based on infoset z_infoset.
then run the z_query, the performance is too bad.
take long time.
How to tuning logical database, infoset and query.
Thanks,

These are what I am dealing with:
Transaction ME80FN
/SAPQUERY/ME, ME80FN query.
Another way to word the question is: How can I make a copy of the global query /SAPQUERY/ME, ME80FN to have that nifty bottom toolbar that transaction ME80FN has?
At first glance, they are the same entity... But the toolbar in the transaction and display options via the last button on the toolbar differentiate the two.
Thanks....

Similar Messages

Transaction ME80FN, SAP Query ME80FN, and logical database MEPOLDB

I am looking at transaction ME80FN. Is that from the global query /SAPQUERY/ME, ME80FN? I was told that ME80FN was from SAP Query... but doubts are creeping in.
   SE93 shows trans. ME80FN as Program RM06EAAW and no logical database. RM06EAAW has different headings and an additional toolbar in the results screen.
Did RM06EAAW get generated from SQ01 ME80FN?
   I have to modify the ME80FN transaction output by adding a field to the PO History display, which is selected from the bottom toolbar, rightmost button. I guess I have to go with RM06EAAW as the starting point(?).
   We are on 4.6B Any suggestions are welcome.
Thanks

These are what I am dealing with:
Transaction ME80FN
/SAPQUERY/ME, ME80FN query.
Another way to word the question is: How can I make a copy of the global query /SAPQUERY/ME, ME80FN to have that nifty bottom toolbar that transaction ME80FN has?
At first glance, they are the same entity... But the toolbar in the transaction and display options via the last button on the toolbar differentiate the two.
   Thanks....

Oracle physical database and logical database.

dear Friends
wanted to know what is physical and logical database architecture.
pls. help.
--Rajnish

And what have you deduced yourself from your searches on the internet, or in the documentation?

Regarding Query and Logical database

Hi All,
I have one requirement to create a report which gives all selection fields of a query.I got the selection fields defined in the query,but some extra selection fields are coming from logical database,which query uses.These extra fields count is different for different queries using same logical data base.Please suggest me a solution.
Regards
Shibin

Hi Jogeswara,
Thanks for your inputs.
But my question is, how can I filter the data which is being fetched by standard logical database. I cannot go inside the std. LDB and change internal tables of it. I tried coding in extras, but I think it works only if we want to add additional fields in output.
At present, we are considering the option of creating a z LDB where we copy. std. LDB and also add the reqd. table which is not present in LDB.
Is there any other option?
Please provide your valuable inputs.
Regards,
Imran Kundan.

Field symbols and logical databases

Hi,
How to use field symbols in an abap HR program with logical database? For most of the reports and interfaces in HR, I have used GET PERNR with logical database to fetch data from the tables. I understand that this method of programming using logical databses, is less coding and improves the performance. I am curious to know the usage of field pointers here. How does this help? Is it necessary from a performance point of view? I would like to look at an example that has LDB and field symbols used in combination. I did not find one in the threads.
Any thoughts and what do you recommend?
Thanks in advance,
VG

Field-Symbols utilize memory more efficiently.Hence Better utilization of memory better is performance.
Memory utilization is one of the factor for performance.
[LDBFIELD-SYMBOLS|https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/generictemplatetoAccessLDB]
[Field Symbols|https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/abap%252bsyntax]
Hope this resolves your query.
Regards,
Gurpreet

Selection screen and logical database PNP

hi all,
I am having a requirement to produce a HR Report where i need to use logical database PNP. Now the issue is i need to supress some of the elements of standard selection screen of PNP and add a couple of fields of mine.
i have been looking all around and i got few of the below methods.
its good to use a report category.
somewhere it says include it in ur program using selection screen block..
can you please guide me which is the best way and what would be a perfect solution?
thanks in advance,
Reena

In the Program Attributes, click on the pushbutton 'HR Report Category'.Click on the 'Create' icon in the pop-up window that comes up. You will get a list of all the available Report Categories. Go through the list & if you don't find one that suits you, select one that is closest & click on the 'Copy As' icon in the menu bar..
Now, you can remove the unwanted fields & add yours for selection. save it & and attach it to report in the attributes.
~Suresh

Func Module : LDB_PROCESS and Logical Database ADA

Hi All,
How to get 'ANLB' data from logical database 'ADA' using the
function module 'LDB_PROCESS'?
Is there any other way to done this without getting into SELECTION SCREEN of this LOGICAL DATABASE?
With Thanls & Regards,
R.Nagarajan.
We can -

Hi,
Using LDB_PROCESS will made all the fields of this LDB available to you......this is the way ..you can use n number of LDB's in your program apart from the one that u mention in Program attributes....
for more details and Function call..use..
Re: How to hide the selection screen of a Logical datebase?

How to add a selection criterion to a SQ01 query based on logical database SDF?

Hi,
How should I add a selection criterion to a SQ01 query based on the logical database SDF? Is it possible through additional code? How to make use of the custom selection fields? I need a selection criterion based on BKPF-CPUDT (creation date).
Thanks.

Hi John,
Please check the given below link in addtion to Atul post.
http://scn.sap.com/community/erp/sd/blog/2012/04/16/query-report-tips-part-2--mandatory-selection-field
Thanks,
Senthil Maruthappan.

Sap query infoset and fieldgroup

hi
cn we have more than one fieldgroup in a single infoset
thanks

Hi
Hope this will helps you
For an InfoSet with a data retrieval program, a field group is created with all fields of the data structure.
Creating a New Field Group
To create a field group, proceed as follows:
Choose the symbol Create from the function toolbar (or Edit ® Field Group ® Create Field Group). A window appears where you can define single or multiple new field groups.
Enter an abbreviation and a long text for each field group.
The abbreviation for a field group can consist of any character that you want. The abbreviation only serves a technical purpose within an InfoSet when fields are being assigned to field groups.
Choose Continue.
Regards
Chandrasekar

Query Related to Logical Database

Hi,
I need to include the following SELECTION CRITERIA, in addition to the standard PNP Selection Criteria.
BUDGET TYPE, BUDGET PERIOD, BUDGET UNIT (ALL MANDATORY)
The report must generate details of the employee's current pay and compa-ratio infomation and the previous pay and compa-ratio information for the selection criteria.
eg:- Reading HRP1001 TABLE with following parameters:-
otype = 'BU'
objid = Specified by the user
rsign = 'B'
relat = 300
I need to know which INFOTYPES does store the values for BUDGET TYPE, BUDGET PERIOD, BUDGET UNIT and how would I relate all to achieve my requirement.
Suggestions Welcomed.
Thanks & Regards,
Rajesh Thakur

Hi Rajesh,
First off Budget Type is a config entry & not infotype specific. Budget Period is dynamic, more like a Financial Year. Budget Unit is in HRP1000. You can use the following for your selection screen.
selection-screen begin of block abc with frame title text-001.
parameters:
          p_budid like hrp1000-objid obligatory, "Budget ID
          p_butyp like t7pm3-butyp obligatory, "Budget type
          p_finyr like ppbt0-finyr obligatory. "Budget Period
selection-screen end of block abc.
Regards,
Suresh Datti

Additional i/o fields to infoset query based on PNPCE logical database

Hi All,
I have a requirement to add two additional input and output fields "job function" and "job family" to a infoset query based on logical database PNPCE. I am new to writing code in infset query and there are so many code areas in infoset query. I am confused where to write code and how to limit the output list based on the user selection to the additional fields "Job function" and "job family". have any one done this in the past?. is there sample code somewhere to do something similar to this?
Your help will be much appreciated with points! (as per our community guidelines)
Regards,
Arul

Hello Arul,
Your question would be better answered if you post it in on of the Business Intelligence Forums. Please close this thread and goto:
Expert Forums » Business Intelligence
or
/community
Regards,
Manny

SAP / ABAP Query - using logical database

Hi ,
We have a mandate to implement SAP Query using only Logical Databases (LDB ) .
We understand that there are several issues using this approach .
1 ) Paralled tables in MM need to be displayed on separate lines .
2 ) Statistics based on fields from 2 different tables cannot be produced eg: EKPO ( PO Number ) and EKKN . (Cost Center )
Please share your experiences .
Thank you in advance .
Kishore
Kishore

Adeel,
I do appreciate your experience and respect you for knowledge on SAP Query.
Joining tables seem simple to IT experts but not so for end users. SAP Query is an end-user tool and users seem to need a simple user-friend, drag-and-drop solution to extract information using SAP Query based on a pre-defined infoset. Various SAP conferences have been advocating the use of SAP delivered Logical Databses to create infosets in order to harness the various advantages of LDBs.
In MM there are several LDBs (e.g. ELM, EBM etc) to create queries on EKPO and EKKN. The problem arises when you use the same LDB to extract information from more than the above two tables e.g. EKPO, EKET, EKKN and EKBE. SAP expects you to display fields on multiple lines and also does not allow producing statistics based on fields from two parallel tables say EKKN and EKBE. Moreover, multi-line reports cannot be produced in the ALV/SLV format.
We are also looking for best practise solutions in providing SAP Query to MM or FI users based on SAP delivered Logical Databases.
Pascal

Difference between PNP and PCH logical database

WHats the difference between PNP nd PCH? When to use which??
Tx

Hi,
The Difference is only with in an SAP R/3 system in which Concurrent Employment is active, reports are executed by the PNPCE logical database. The general logic of the PNPCE logical database corresponds to the PNP logical database. The PNPCE logical database can also process the concept of Concurrent Employment.
HR Logical Databases
In Human Resources (HR), the following logical databases can be used as a data source for HR InfoSets:
PNP (PNPCE)
PAP
PCH
By selecting a logical database, you determine the HR data that can be reported on using an InfoSet.
Logical Database PCH
This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
Logical Database PNP (or PNPCE)
Use logical database PNP to report on HR master data. It is possible to use logical database PCH to access this data, but PNP meets such reporting requirements more quickly because it is best suited to the task of selecting persons.
Logical database PNP enables you to access HR master data and infotypes from Personnel Planning. For example, you have the following options:
Reporting on the costs, number of attendees booked, and instructor for a business event on which an employee is booked
Reporting on working time and planned compensation for a position that an employee occupies
Reporting on the validity and proficiency of a qualification that an employee fulfils
From a technical perspective, this means you can use PNP to report on all of the infotypes that exist for objects (infotype 1000) that have a direct relationship (infotype 1001) with the Person object.
The ability to access infotypes from Personnel Planning using logical database PNP is a special feature that you can only use in the context of SAP Query and Ad Hoc Query. You cannot use this functionality for ABAP reports you programmed yourself.
You can also use logical database PNP to report on data from Personnel Time Management (infotypes 2000 to 2999) and Payroll (special payroll infotypes for the USA and customer infotypes; for more information, access Customizing for the Human Resources Information System and see Payroll Results).
Logical Database PAP
Logical database PAP enables you to access data from Recruitment.
Check this link for more details
http://help.sap.com/saphelp_erp2004/helpdata/en/e1/e1f83f6e5a11d687620000e82158f1/frameset.htm
<b>Reward points</b>
Regards

Adding a dynamic selection to a logical database query

Hello,
I would like to add a dynamic selection to a SQ02 Infoset using logical database SDF. I need the report to show only documents created at certain dates. I've added a selection field "CR_DATE" for BKPF-CPUDT to the Infoset and added the following code:
SELECT * FROM BKPF
WHERE BKPF-CPUDT IN CR_DATE.
ENDSELECT.
However, the report displays documents created on all kinds of dates regardless of the ones I've specified at the selection screen.
I can only use SQ02 and SQ01. I don't have access to most other transactions such as SE36 nor have the authorization to edit the existing report transaction such as FAGLL03.
Please, help.

Hi John,
Only certain table fields are allowed in dynamic selection, please see this sap note for detail :
Sap Note 310886 - Line items: Dynamic selections ignored
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
So BKPF-CPUDT field is not allowed for dynamic selection.
Regards
Javed

LOGICAL DATABASE IN HR ABAP PRPGRAMMING

Hi Friends,
what is use of LOGICAL DATABASE IN HR ABAP PROGRAMMING
AND END-OF-SELECTION EVENT IN HR PROGRAMMING PROGRAMMING???
regards,
vijay.

hi
HR Logical Databases
In Human Resources (HR), the following logical databases can be used as a data source for HR InfoSets:
PNP (PNPCE)
PAP
PCH
By selecting a logical database, you determine the HR data that can be reported on using an InfoSet.
Logical Database PCH
This logical database generally enables you to report on all HR infotypes. However, you are advised not to use this logical database unless you want to report on Personnel Planning data.
Logical Database PNP (or PNPCE)
Use logical database PNP to report on HR master data. It is possible to use logical database PCH to access this data, but PNP meets such reporting requirements more quickly because it is best suited to the task of selecting persons.
Logical database PNP enables you to access HR master data and infotypes from Personnel Planning. For example, you have the following options:
Reporting on the costs, number of attendees booked, and instructor for a business event on which an employee is booked
Reporting on working time and planned compensation for a position that an employee occupies
Reporting on the validity and proficiency of a qualification that an employee fulfils
From a technical perspective, this means you can use PNP to report on all of the infotypes that exist for objects (infotype 1000) that have a direct relationship (infotype 1001) with the Person object.
The ability to access infotypes from Personnel Planning using logical database PNP is a special feature that you can only use in the context of SAP Query and Ad Hoc Query. You cannot use this functionality for ABAP reports you programmed yourself.
You can also use logical database PNP to report on data from Personnel Time Management (infotypes 2000 to 2999) and Payroll (special payroll infotypes for the USA and customer infotypes; for more information, access Customizing for the Human Resources Information System and see Payroll Results).
Logical Database PAP
Logical database PAP enables you to access data from Recruitment.
regards
navjot
reward if helpfull

Query, infoset and Logical database tuning?

Similar Messages

Maybe you are looking for