Query not showing any results - Urgent

Hi all,
I am running a query on the project dates (0PS_C05), although there is data in the cube , the query says no applicable data found, although there is no filter for the object ( Origin - 0DATE_SRCE ) in the query definition , but when the query is run , It is shown as filtered by value 1, can there be any hidden filters.
Thanks

Hi,
Another way to check is to create a copy of the query. Now on the copied version, simply remove the keyfigures/chars one by one as you execute the query.
One way or the other, you will see the culprit filter in your query...
If helpful, please grant points...
Regards,
--Jkyle

Similar Messages

Query not showing any data-urgent

hi experts
i ma facing this problem: i have created an ISH (services) infocube which i have loaded with data, when i do a 'display data' on my cube i can properly see the data, when i open the query designer or analyser though, even when designing the simplest of queries ie just a service and its billed quantity and value i get a 'No Applicable Data Found' message
it is not a matter of authorization i have full priviledges and i also have 4 other cubes on which i can create reports on normally
the data in my cube is available for reporting
if anyone could suggest something it would be appreciated as i am working on a strict deadline
thanks

Hi ,
If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
Hope this helps,
Aparna Duvvuri

Spotlight is not showing any results!

I just upgraded to Leopard and now my spotlight app will not show any results when typed upon. I have tried to re-index the volume through system pref. but it didnt work. Anyone know any other methods to get it back into shape? thanks

enter the following terminal commands form an admin account:
sudo mdutil -i off /
sudo mdutil -E /
sudo mdutil -i on /
please copy and paste them exactly as given. you'll have to enter your admin password (which you won't see) after the first command. that's normal.
the commands turn spotlight off, delete the index and turn it back on.

QUnit not showing any results - VisualStudio 2013

In Mircrosofs book:
"Programming in HTML5 with JavaScript and CSS3" there is testing with QUnit.
Have done exactly as the book describes with in an example with an webcalculator in excersise 3.
But when I run the debugging with QUnit does not show any results.
It does not matter if I program an
error..nothing is displayed when I´m start debugging.
Only a blue line with the following:
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.95 Safari/537.36
My question:
How do I make QUnit to show something?
I really appreciate your answer
:0)

Hello,
Please post your question in ASP.NET forums here:
http://forums.asp.net/
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Not showing any results V_V2 resheduling sales and stock transfer documents

My client using IS Retail . First i create sales order i want resheduling perticular order through V_V2 i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
Please give answer i am waiting your reply...
Edited by: amitp2121 on Mar 3, 2011 11:57 AM

Hi Hweiling,
In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
V_V2 is used when you want to alocate your stock based of priority or some criteria.
For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet, then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
If you run V_V1, it's only update the stock for second item (if stock is enough).
If you think why it's not update the order that you want when you run V_V2, please check the criteria and the stock.
Guys please correct me if I am wrong.
tsalasi

Disk Utility does not show any result....

Dear Apple Community,
on my mid 2012 Mac Book Air the disk utility test does not show any result. The test just stops at some point and can be restarted again, but does not show weather the SSD is damaged or not.
Does anyone know what this means?
Thanks a lot for your advice!

I think this happens to everyone (who uses "Live Verification") in Mavericks. Occasionally the output from the test shows correctly, but usually not. I guess this will get fixed someday.
Apple - Mac OS X - Feedback
For now, probably you will get best results from using command-r at startup to get into "recovery mode", then run disk utility from there.
charlie

Search Query not showing up results

Hi ,
I m firing a UCM query using the UCM admin console ,something like xLanguage <contains> `it-IT`,but it is not returning any results,although the content matching this condition exists in the content server in Released state.I have also rebuild the search indexes.
I m not seeing any errors in the logs as well.
Can anyone tell me what might be going wrong here and what more can i do to debug this.

If this is Oracle Text Search, you might be hitting a stop word. ('It' would likely be considered a stop word.)
Try searching using Repository Manager. If the document returns, then in the web ui, try enclosing the search phrase in braces
xLanguage <contains> `{it-IT}`

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Basic NOT EXISTS query not returning any results

DB Version: 10gR2
One of our tables in the test schema is having less number of columns than the PROD shema.
To determine which are missing columns in this table in Test schema i did the following.
-----In Test Schema
CREATE TABLE XYZ2
(COL1 NUMBER);        ----------only one column
SQL > CREATE TABLE tables_test_list AS SELECT TABLE_NAME,COLUMN_NAME FROM USER_TAB_COLS;
Table created.--- In the prod schema
SQL> CREATE TABLE XYZ2
2 (COL1 NUMBER,
3 COL2 NUMBER       ----------- same table name with an extra column
4 );
Table createdAnd from the PROD schema i execute the following SQL to determine what are the columns that are missing in the TEST schema
select column_name from User_Tab_Cols outer
where table_name='XYZ2'
and not exists (select 1 from TEST_SCHEMA.tables_test_list inner where outer.TABLE_NAME=inner.TABLE_NAME )But the above query is not returning any results. Any idea why?

Actually, the example from the link I posted earlier:
[email protected]> (
2 select 'IN T1, NOT T2', column_name,data_type,data_length
3    from user_tab_columns
4   where table_name = 'T1'
5 MINUS
6 select 'IN T1, NOT T2', column_name,data_type,data_length
7    from user_tab_columns
8   where table_name = 'T2'
9 )
10 UNION ALL
11 (
12 select 'IN T2, NOT T1', column_name,data_type,data_length
13    from user_tab_columns
14   where table_name = 'T2'
15 MINUS
16 select 'IN T2, NOT T1', column_name,data_type,data_length
17    from user_tab_columns
18   where table_name = 'T1'
19 )
20 /

"Find" tool not showing any results

The "Find" tool isn't showing any results despite searching with test words that are in the document. The "Advance Search Options" tool doesn't turn up results either. I am using Reader XI. Document properties show that the PDF Producer is "TypeReader 6.0 Professional" and the PDF Version is 1.5 (Acrobat 6.x). Any suggestions on how to resolve this issue?

Hi Claudio,
Tried to select and cannot, so it's an image of text. Thanks for your help!

Parameter not showing any results

Hi all,
To start off, I am a SAP BI consultant starting to learn crystal report, so I am quite a novice.
Currently I have a problem with parameters, I am using the xtreme.mdb to learn crystal report.
My crystal report is 2008.
My report is quite simple, it has customer id and customer name. I have created a parameter using dynamic list of values instead of static. The value of the datasource is customer id and the "allow discrete" value is set to true.
So far, no problems. When I inserted the parameter in the report and preview it, the report comes up with a popup with a drilldown arrow. When I click on the arrow it is not showing any values.
Also, clicking on "OK" or "Cancel" in the popup doesn't do anything.
Can anyone please help?
thanks in advance,
James

Hi james,
Please go through the thread
Re: CR XI - Command Parameter Not Working
regards
Baby

Query not executing any results

Hi,
I have created a Custom Virtual Cube with a custom function module. This Cube displays data when i check it through the transaction code - LISTCUBE.
I have a query which has to be executed on this Virtual Cube. When i execute this Query , it does not display any data at all. It always displays "No applicable data found".
I have tried with the combination of inputs for which the data is available in the cube. but still it gives "No applicable data found".
Can someone suggest me what i have to do to correct this problem.
Thanks
Maddy

Hi Maddy,
I also encountered similar problem in BI 7.0, which doesn't happen in BW 3.5, though I was using Basic Cube, not Virtual Cube. I could finally work it out. Here are the steps I used:
- Right click on the InfoCube > choose "Manage".
- In the "Requests" tab, click the traffic light button in the "Request Status" column, set it to "Status OK".
- The "Request for Reporting Available" column will show the "Request is available for reporting" icon automatically.
- Try to execute your query again.
Hope this might be relevant to your situation as well.
Regards,
arie

Payroll run process is not showing any results

We have Oracle Applications 11.5.10.2 with vision demo database with US legislation. After completing all the required setups for Payroll and defining a new payroll and all the requirements for the payroll, when we submit the request Payroll Process we are not able to see any results, even though the request has completed successfully without any errors. We are not able to see any salary details in Statement of Earnings, Payslip etc. And data is not displayed even if we use Quickpay.
What could be the problem?

You can post it in HRMS forum, they might be able to help
Human Resource Management (HRMS)

Query not giving any result

SQL> set long 2000
SQL> select * from v$version;
select username from dba_users where username like '%KRO%';
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
SQL>
USERNAME
SUPRKRON
KRONREAD
SQL>
select sum(bytes/1024/1024/1024) from dba_segments where owner='SUPRKRON'SQL> ;
SUM(BYTES/1024/1024/1024)
3.62319946
SQL> select sum(bytes/1024/1024/1024) from dba_segments where owner='KRONREAD';
SUM(BYTES/1024/1024/1024)
-------------------------

user11919409 wrote:
SQL> set long 2000
SQL> select * from v$version;
select username from dba_users where username like '%KRO%';
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production
SQL>
USERNAME
SUPRKRON
KRONREAD
SQL>
select sum(bytes/1024/1024/1024) from dba_segments where owner='SUPRKRON'SQL> ;
SUM(BYTES/1024/1024/1024)
3.62319946
SQL> select sum(bytes/1024/1024/1024) from dba_segments where owner='KRONREAD';
SUM(BYTES/1024/1024/1024)
-------------------------OK, KRONREAD does not own any objects.
a READONLY schema?

Log application query not showing correct results

Hi,
We are running Dataguard (DG) in our production environment. EBS 11.5.10.2 and DB 10.2.0.4.
Every morning we run the following query on both primary and standby to confirm that the logs are being transported and applied to the standby:
select sequence#,applied,to_char(first_time,'mm/dd/yy hh24:mi:ss') first from v$archived_log order by first_time;
Once the logs are transported and applied, a response of 'Yes' is returned for each log generated. We have noticed within the last week that when we run the query on primary, 'No' is being returned, but on standby, 'Yes' is returned. I have confirmed that standby is reflecting the correct results. I've tried restarting the DG service (alter database recover managed standby....) in an attempt to have primary 'refresh' itself but that didn't work.
Does anyone have any idea why primary keeps returning 'No' to the query, and how we can get it to reflect to correct results?
Thanks,
Lia.

Hi Werner,
Thanks for your response. Given what you're saying I find that a little strange since prior to this, the query would return a value of 'YES' on the primary. Actually, to be exact, on the primary, each log would should up twice. One would show 'NO' and the other 'YES'- the second indicating transporting and shipping was successful.
This is how the results were before:
SEQUENCE APP FIRST
+154623 NO 04/07/09 08:03:22+
+154623 YES 04/07/09 08:03:22+
+154624 NO 04/07/09 08:05:27+
+154624 YES 04/07/09 08:05:27+
This is how the results are now:
SEQUENCE APP FIRST
+154754 NO 04/22/09 07:22:22+
+154754 NO 04/22/09 07:22:22+
+154755 NO 04/22/09 07:25:27+
+154755 NO 04/22/09 07:25:27+
I'm not doubting that what you're saying is correct, it just adds an element of confusion for me...
Lia.

Query not showing any results - Urgent

Similar Messages

Maybe you are looking for