Query Not working with Keyword search

I need to search based on the keywords from the client. See my query.
The intent is to search the DB table the Users entered Keyword 'Har'
I need to get from Columns "CompanyName","Franchise" and "Category "
all the Records where the Country is USA, and State is TX, Type is 'motorcycle' and columns "CompanyName","Franchise" and "Category " have records with the keyword "Har".
Lets assume Franchise has "Harrrr", CompanyName has "harley davidson" and Category has "Harl Bannon", I need to get all of them provided the state is Texas and the country is USA.
SELECT     *
FROM contacts
WHERE (0=0)
AND country LIKE 'USA%'
AND CompanyName LIKE 'Har%'
AND Franchise LIKE 'Har%'
AND Category LIKE 'Har%'
and state LIKE 'TX%'
and Type in('motorcycle')
AND active = 1

OK This is my revised query which is working now but the server is taking a heat on it to retrieve the query. Please Help
SELECT *
FROM (SELECT *
     FROM Contacts
     WHERE (CompanyName IN (SELECT CompanyName
               FROM contacts
               WHERE CompanyName LIKE 'har%'
               AND country LIKE 'USA%'
               AND state LIKE 'TX%'
               AND Type in('motorcycle')
               AND active = 1))
     OR (Franchise IN (SELECT Franchise
     FROM contacts
     WHERE Franchise LIKE 'har%'
          AND country LIKE 'USA%'
          AND state LIKE 'TX%'
          AND Type in('motorcycle')
          AND active = 1))
     OR (Category IN (SELECT Category
          FROM contacts
     WHERE Category LIKE 'har%'
               AND country LIKE 'USA%'
               AND state LIKE 'TX%'
               AND Type in('motorcycle')
               AND active = 1))
) a
WHERE country LIKE 'USA%'
AND state LIKE 'TX%'

Similar Messages

  • Smart Groups not working with keywords?

    I've gone through the various forum posts on Smart Groups (especially this one - http://discussions.apple.com/thread.jspa?messageID=8649078&#8649078) but still haven't found an answer to this problem.
    After importing my test files into my local iTunes install, I used the "Get Info" method to edit the metadata for those files. At this time, I put a series of keywords in the "grouping" field. I then uploaded these test files to our iTunes U site.
    When I search for those keywords on our site, I get the results that I expect to get. However, when I try to create a Smart Group based on any of those keywords, I get no results. I waited for a few days, hoping that the indexing would catch up and yield more search results - but that didn't seem to fix the problem. The documentation states that Smart Groups should work with keywords... so is there something I'm missing here?
    Any thoughts would be very helpful.

    Duncan, thanks for responding to me quickly.
    I'm confused where the keyword field is, though. I don't know of a keyword field using the "Get Info" method of editing the file's metadata on the local iTunes install, and the guide is unclear about where that field is or how to add information into it.
    On this page (http://deimos.apple.com/rsrc/doc/AppleEducation-iTunesUUsersGuide/UsingiTunesUSe arch/chapter10_section2.html), it mentions the following method for adding keywords for iTunes U:
    "To add additional keywords for iTunes U to search:
    1. Control-click the track where you want to add keywords, then choose Get Info from the shortcut menu that appears.
    2. Click the Info tab.
    3. Add keywords to the Grouping field. When searching your iTunes U site, after a track title, keywords in the Grouping field have the second-highest matching relevance.
    4. Click OK."
    This is the method that I've been using, since it seems to say that any words added to the "Grouping" field on the local install get read as keywords by iTunes U. Is there another way to add keywords to a file that I'm missing?

  • Attribute mapping not working with complex searches

    Hi all,
    We are using "attribute mapping" for some attributes and that works fine as far as we don't make a complex search. We are doing the attribute mapping at the Directory proxy 6.3 so we map businessSector to businessUnit. Everything work fine if we just put businessSector in the search, but if we add something else to the search filter, it will not work.
    So, if we use filter businessSector=XXXXXXX, it will work and make all the mapping, but if we use something like "(&(pocketSizeOffice=Yes)(businessSector=XXXXXXX))", it will not work.
    We have look at the logs and we see the mapping happening in the first case, but not in the second one.
    Have somebody seem this before or is facing this problem?
    Thanks,
    Federico

    Hi Federico,
    I was not able to reproduce the problem with DPS 6.3 in my labs... so the conditions to reproduce it may be more tricky than described. Anyway, this is not a known problem.
    Feel free to contact Sun support to have a fix delivered to you.
    Thanks
    -Sylvain

  • Arrow key scrolling not working with advanced search- Adobe Reader X

    I'm using adobe reader X and when I get results from an advanced search I am scrolling down the search results with the arrow keys, but the document will not update. I know this will work. Can anybody please help?

    I am also having this problem.  Previous installations of Acrobat X allowed me to use the up and down arrows to navigate the search results, but no longer loads the appropriate page in the document.  I have to click each entry or hit the enter key after using the down arrows to update the page.

  • Query not working with oracle 6i forms

    hello
    i am trying to fetch data through CURSOR in orcle 6i forms.
    i am using follwing query given below
    cursor c1 is
    SELECT EXTRACT("YEAR FROM dateofmtrl") yr
         , SUM(CASE mtrl_flag WHEN 'P' THEN rm1 ELSE -rm1 END) AS opc
         , SUM(CASE mtrl_flag WHEN 'P' THEN rm2 ELSE -rm2 END) AS ppc, 0 AS clinker
    FROM rawmtrl_graph
    GROUP BY EXTRACT(YEAR FROM dateofmtrl)
    order by EXTRACT(YEAR FROM dateofmtrl);-----------
    But it is giving errors............
    Please tell me how to overcome these errors
    thanks in advance for any help....
    With Regards
    Vishal Agrawal

    Dear Vishal,
    CASE statement is not supported in Forms 6i. Instead of CASE statements, use DECODE.
    Regards,
    Manu.

  • Select query not working with like & and operator

    Hi,
    The below is the select query which is used to select only the failed rollup jobs from DB table ( background jobs ) the status 'A' which means only the failed roll up jobs.
    select jobname status from v_op into table zjob_rollup where jobname like '%ROLLUP%'
                                                             or jobname like  'BI_AGGR%'
                                                             and status like 'A'.
    Right now my internal tables is picking the job name other than status A also.
    Can you please help.
    Note: Ps consider the performance of select query also.
    Thanks,
    Siva

    Hi,
    select jobname status
         from v_op
         into table zjob_rollup
         where ( jobname like '%ROLLUP%'  or jobname like  'BI_AGGR%' )
                      and status = 'A'.

  • Safari not working with Yosemite- incompatible with google search too

    Ever since I upgraded my macbook pro, Safari has been slow.  In the past 2 days, it's more than slow - it's impossible.  I am able to get to pages I have bookmarked or get to links in email documents - but every time I try to do a search using the search bar in Safari, it hangs.  Sometimes I get a list of possible websites (after a few minutes) but if I click on any of those, Safari just hangs there and won't go.  I even had to use Chrome in order to generate this question in the discussion groups. Does anyone have any suggestions other than using an alternate browser.   Is it possible that google and Safari on Yosemite are incompatible? I did try using the "Develop" menubar option and chose DuckDuckgo as the search tool and it worked a bit better.
    This is now the 2nd big issue I've had with Yosemite -- it totally would not work with my Adobe Photoshop Elements program -- I spent hours on the Adobe forums and discovered that 100s of others were also having issues.  It turned out to be a problem with Yosemite and the trackpad.  Adobe finally came up with a temporary plugin that allows Elements (and other Adobe programs) to run.
    Suggesions on Safari other than ditching it and using Chrome?

    Try a Safari reset.
    Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items.  Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Yahoo music search bar not working with Firefox 5

    Yahoo music search bar not working with Firefox 5.

    go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Zoom -> click "Reset"
    -> go to View Menu -> Page Style -> select "Basic Page Style"
    -> go to View Menu -> Toolbars -> unselect "Yahoo! Music Search Bar"
    -> go Tools Menu -> Clear Recent History -> ''Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on ALL Options -> click "Clear Now"
    -> go to Tools Menu -> Options -> General -> ''When Firefox starts : '''select "Show My Home Page"''''' -> Type the address of the website which you want to be your HomePage e.g. http:www.google.com -> click OK
    -> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> PLACE CHECKMARKS on:
    1) Remember my Browsing History
    2) Remember Download History
    3) Remember Search History
    4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> REMOVE CHECKMARK from Last Option (CLEAR HISTORY WHEN FIREFOX CLOSES)
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select "Yahoo! Music Search Bar" and other unwanted search engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE "Yahoo! Music Search Bar extension" (add-on) and other Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • Why my phone's Android apps not work with normal ph data connection​s???

    After 10.3.1.1779 update my phone Q5 had facing lots prblms... at first I can't download anything from amazon app store with normal deta connection, 2nd android apps not work with normal mobile deta connection its always need wifi, 3rd mobile search engine not worked properly and also contact books always show no contacts after restarts it's fixed bt some time later it's starts again... and pls give update for facebook.... plssss plssss blackberry fix those problem.....

    Can I see your /var/log/Xorg.0.log through Pastebin?

  • MBP CD2 DVI to VGA not working with projector

    I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
    A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
    My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
    As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
    Any ideas, any help, any answers?

    Here are the actors in our play today
    1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
    2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
    3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
    4. DELL 2300 MP projector
    Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
    In Display preferences we see for the MBP B
    Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
    VGA Display
    Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
    Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
    I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
    This is a problem!
    So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
    I shut down/restarted the MBP B.
    I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
    Enter the iBook!
    I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
    iBook display prefs reveal:
    Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
    Color tab: Generic RGB Profile
    VGA display, 1024X768, colors: Millions,
    Now. I unplug adapter from iBook, iBook readjusts to native display
    plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
    Scene 2: The FREAKY thing!
    Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
    Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
    Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
    Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
    Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
    Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
    So, I plug back into iBook-projector. And the iBook works immediately again.
    I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
    Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
    Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
    Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
    So,
    I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
    Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
    I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
    Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
    Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
    Back to the good ol' iBook. Of course it works.
    Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
    Now switching over to MBP A- DOESN'T WORK.
    As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
    Any thoughts, ideas, ways to diagnose? Thanks!

  • Applets not working with Java 1.7.0_51 in MII 14.0 SP4 Patch 5

    Hi,
    I'm currently evaluating the migration of our MII 12.0 developments to MII 14.
    But I'm running in several issues just trying to use simple things like a SQL query template with an iGrid Display template in test mode.
    Used versions are: MII 14.0 SP4 Patch 5 and on client side the latest Mozilla Firefox with Java 1.7.0_51
    At first I always get a java security warning when the applet is being loaded about unsigned applications.
    At second the applet itself is not running. It always shows "No data available" and the java console shows the following errors (iResult is the id of the applet):
    iResult [ERROR] - Couldn't set query template: No Query Defined
    iResult [ERROR] - Couldn't set display template: null
    iResult [ERROR] - Couldn't set display template: null
    Is this perhaps a general problem, that the MII applets are not working with Java 1.7.x versions?
    If I call the same MII page from a client with Java 1.6.x it is working without errors.
    Do you have some suggestions for me?
    Regards Timo

    please clear your JAVA Cache. that should solve the JRE issue. thanks

  • StarTech Adapter not working with Dell Inspiron 15, model 3521

    Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
    Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521 
    I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
    I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
    It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
    I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model. 
    If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for! 
    Any thoughts?

    Hi,
    Thanks for your reply.
    This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

  • Itunes not working with Vista Home Premium 32-bit

    Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

    Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
    Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
    Checking on things that can cause QuickTime launch errors now.
    Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
    (I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

Maybe you are looking for