Using ufsrestore on multiple file systems

I have a ufsdump script that allows me to backup the file systems on c0t0d0 all at once. Now I am looking for a way to restore all of these file systems at one time using a script. I would greatly appreciate any help.
Cletus

Is this the boot disk ?

Similar Messages

/em/console/notif/addMetrics, How I specify multiple file systems?

People,
In EM 10gR2,
How do configure
Filesystem Space Available (%)
metric which I find here:
/em/console/notif/addMetrics
It seems obvious if I have just 1 file system to monitor.
I just type in /u01 for example.
How do I specify multiple file systems?
Do I separate each file system name by a comma:
/u01, /u02, /u03
...Peter
http://GoodJobFastCar.com

You can use like /u0*

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

10gR2 install on RHEL4, Intelx86, using 10gR2 on GFS file system.

cat ocrconfig_12971.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2005-10-13 14:57:41.376: [ OCRCONF][4142143168]ocrconfig starts...
2005-10-13 14:57:41.377: [ OCRCONF][4142143168]Upgrading OCR data
2005-10-13 14:57:41.409: [ OCROSD][4142143168]utstoragetype: /u00/oracrs/crs is on FS type 18225520. Not supported.
2005-10-13 14:57:41.410: [ OCROSD][4142143168]utopen:6'': OCR location /u00/oracrs/crs configured is not valid storage type. Return code [37].
2005-10-13 14:57:41.410: [ OCRRAW][4142143168]proprinit: Could not open raw device
2005-10-13 14:57:41.410: [ default][4142143168]a_init:7!: Backend init unsuccessful : [37
Any help on above appreciated.... it is RHEL4, Intelx86 (32bit), using 10gR2 on GFS file system.
is this supported?

Hi Owen,
We have experienced the exact identical errors when installing 10g R2 on the same o/s version.
We tested a bypass of that error by clicking continue on the error window and let the install 'complete'.
We then attempted to start an existing 10.1.0.4 instance and the error libkaio.so.1 not found occurred. I then ldd oracle and discovered the /usr/libaio.so.1 was not found. It turns out we downloaded and installed the libaio_64 rpm then executed relink all. The link completed successfully and we were able to start the instance then manually upgrade it to 10.2.0.1.
It's my feeling that the lib file versions (32 vs 64 bit) play a roll in th eerrors occurring during this new install.
We are opening a TAR about the install errors regarding rmem an wmem kernel parameters and the swap space requirements documented and the associated error.
This forum by the way has a faster time to discussion than Metalink does!
Regards,
Tracy Davis
Bonneville Power Administration

[solved] scritpt to check the used space of different file systems

how to write a scritpt to check the used space of different file systems and print if any file system above 50%
I used this command to get the different filesystem and their used space
df -h | grep -v Filesystem |tr -s " " | cut -d" " -f1,5
Thanks in Advance

Please try this command:
df -Ph | tr -s " " | cut -d" " -f1,5 | sed -n "s/\([5-6][0-9]%\)\|\([0-9]\{3\}%\)/&/p"
It works for me. Good luck
Tiger Zhang
.

How increase external disk size used for an existing file system, Solaris10

Configuration:
Server: Sun T5220
S/O: Solaris 10 5/08 s10s_u5wos_10 SPARC
Storage: EMC AX4-5
EMC PowerPath: PowerPath Version 5.2
I have the following scenario:
In AX4-5 storage array, I created two LUNs into RAID Group 10, with Raid Type1/0:
LUN 101: 20Gb
LUN 102: 10Gb
Both LUNs were added to Storage Group (SG1) that includes two Servers (Server1 and Server2); both servers have Operating System Solaris 10 5/8 and Power Path.
The servers detect both LUNs across two paths. With Power Path were created a virtual path (emcpower0a, emcpower1a) to access to each LUNs respectively.
We have mounted two file system /home/tes1 over emcpower0a -> LUN101 and /home/tes2 over emcpower1a -> LUN102.
Filesystem size used avail capacity Mounted on
/dev/dsk/emcpower0a 20G 919M 19G 5% /home/test1
/dev/dsk/emcpower1a 10G 9G 1G 90% /home/test2
I want to increase the space in file system /home/test2, without lost the information that I have stored and using the same LUN, LUN 102. To do this I start with the following steps:
1- Create new LUN, LUN 103 with 15Gb into RAID Group 10. Result: OK, I have available space in RAID Group 10.
2- Add LUN 103 to LUN 102, using concatenation option. Result: OK. This action creates a new metaLUN with the same characteristics of LUN 102, but with new space of 25Gb.
After to do these actions, I want to know how Solaris recognize this new space. What I need to do, to increase the size of file system /home/test2 to 25 Gb. Is that possible?
I reviewed the description of each disk using format command, and the disks not have any change.
Could anyone help me? If you need more detail, please do not hesitate to contact me.
Thanks in advance.

Robert, thank a lot for your know how. You helped me to clarify some doubts. To complete your answer, I will add two more details, based on my experience.
After to execute, type -> auto configure and label, the disk was created with different partitions like root, swap, usr, like this:
Volume name = < >
ascii name = <DGC-RAID10-0223 cyl 49150 alt 2 hd 32 sec 12>
pcyl = 49152
ncyl = 49150
acyl = 2
nhead = 32
nsect = 12
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 682 128.06MB (683/0/0) 262272
1 swap wu 683 - 1365 128.06MB (683/0/0) 262272
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 1366 - 49149 8.75GB (47784/0/0) 18349056
7 unassigned wm 0 0 (0/0/0) 0
This was not convenient because all information stored appear in the first slice and growfs not work if appear root or swap slice into the disk, for that reason was necesary to recreate manually every slice with partition command. The final result was this:
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 - 49149 9.00GB (49150/0/0) 18873600
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Now, execute again the label command to save the new information.
Mount file system and execute:
growfs M file_system mount_point to expand the file system to 9Gb.

Using intermedia search on file system

I know it is possible to intermedia index documents stored on a file system.
Is it possible to integrate this search into the standard search facility in portal ?
ps, we don't want to use ifs in this case.
regards,
Terje
null

Terje
Intermedia only indexes documents stored in the database - today. Look for a new feature in the Oracle9i Database that extends Intermedia indexing to file system-based content. In the meantime, check out our search partners Verity, Autonomy and Altavista and their portlets at: http://www.oracle.com/portals/partners/ppi/index.html?comp1.html
null

Using script on multiple files in a folder.

THis has GOT to be easy, but I can't figure it out.
Walgreens wants you to email photos to them, but I usually do like 50 photos at a time. So, I created a script that takes an object and emails it. The problem is, I don't know how to do it to one photo, then the next, etc. It will do all the photos, but that is one HUGE email!
So that's my question. How do I get the script to run individually on multiple files?
Thanks in advance.
Dave

Copy, paste, edit (where appropriate), and save - the code below as an application (AppleScript applet):
-- Code starts here --
property toAddress : "[email protected]"
property tSubject : "Please process my photo(s)."
on run {}
my send_Photos(choose file with multiple selections allowed)
end run
on open (dItems)
my send_Photos(dItems)
end open
on send_Photos(tItems)
with timeout of 0 seconds
tell application "Mail"
repeat with i in tItems
try
set tMessage to make new outgoing message with properties {visible:true}
tell tMessage
make new to recipient at end of to recipients with properties {address:toAddress}
set subject to tSubject
tell application "Finder" to set fname to displayed name of i
set content to ("Attached is the photo: '" & fname & "'." & return & return)
tell content to make new attachment with properties {file name:i} at end of last word of last paragraph
send
end tell
end
end repeat
end tell
end timeout
end send_Photos
-- Code ends here --
Double click on the applet and select the desired file(s), or drag the desired file(s) onto the applet - for further processing.

Can't use"Open With" multiple files Bridge to Premiere

I'm running Vista 32 bit CS3 Bridge and Premiere.
According to the Video workshop
http://www.adobe.com/designcenter-archive/video_workshop/
under Premiere > all 19 topics > Managing Media in Adobe Premiere Pro > at 02:46 it shows group selecting a bunch of quicktime files using Edit > Select all, then File > Open With ...the drop down shows Premiere.
Mine only show Premiere if a single file is selected. If I multiple select, it only shows Quicktime Player 7.6.
I've checked the file type association in preferences of Bridge to open these files in Premiere but it still only sees Premiere if a single file is selected.
I've upgraded Bridge to 2.1.1.9 and set to run as Administrator but to no avail.
Any ideas?

The files are .mov quicktime. Rightclicking gives the same error.
I've got the latest update (2.1.1.9)
Not yet tried to reset Preferences but will do that tomorrow. (will let you know)
However.....
I have now changed the file association in Vista, re-started Premiere and Bridge and then after having started just Premiere chose File > Browse and the selected all the .mov files and selected Open With. Hurrah! Premiere is now listed!
However, If I continue the focus changes to Premiere but a warning appears "This file path does not exist on disk at this location".
Nothing is imported. Unlike the video workshop mentioned above.
If however, I chose Open and not Open with then the files are imported.
Seems to be a bug with Open with with more than one file chosen. If a single file is chosen and Open With is applied then the focus changes to Premiere but no file is imported.
I have seen the exact same problem in another discusion "Re: Bridge CS3: Not importing clips into Premiere CS3" (see the More Like This panel on the rightside of this window)

Using javascript on multiple file html

I am having a folder with 1000 html files.
I have to remove certain nodes which is easy using xpath for each html. SO i have made the javascript. I cant open each html file in firefox and run the javascript through firebug console.
I m using linux, so how to do.

Have you tried using other tools e.g. xmlstarlet or xmllint? The latter has e.g.
--xpath "XPath_expression"
Run an XPath expression given as argument and print the result. In case of a nodeset result, each node in the node set is serialized in full in
the output. In case of an empty node set the "XPath set is empty" result will be shown and an error exit code will be returned.

Using WAD with multiple source systems

Is there a way connect 2 BW sources to a dashboard built in WAD?
We have 2 BW systems in our global company. We want to create global metrics and the current strategy is to pull all data into 1 BW system and post.
There must be an easier way to pull a query from 1 BW system and another query from a 2nd system and post both results.
Without physically pushing the data into the backend.
Any ideas?
Thx,
Brandon

WAD won't be able to access from a different BW system other than the one you initiated the application from.
If you are using Visual Composer you could have done that, but another solution might be creating Remote Cube.
Check out this:
http://help.sap.com/saphelp_bw33/helpdata/en/26/39dc37bff7a66de10000009b38f889/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/5909392a430303e10000000a114084/content.htm
thanks.
Wond

RAC using templates /u01 corrupt file system

Hi,
newbie to the forum - please be gentle ;o)
Trying to install RAC using virtualbox and templated. Get to the point of just before first boot interview when vnc'd into the virtual machines. But the boot fails with a corrupt /u01. ANyone had corrupt /u01 before ? How to stop it happening ? I tried to continue by using "fsck -a" but it would not allow automatic fix. So I tried manually going through each error ( but there are thousands ). Also tried taking /u01 out of fstab to get first interview. But then the installed failed after doing buildcluster.sh due to same issue ( corrupt /u01 ).
Have tried creating new VMs - always getting corrupt /u01.
Any thoughts / ideas welcome.
Thanks.

Arf,
I am new to RAC. I analyzed Alejandro's script. He is main connection is to the first instance; then through sql*plus, he gets connected to the second instance. he exits the second instance and starts with RMAN backup to the database . Therefore the backup to the database is done from the first instance.
I do not see where he setenv again to change to the second instance to run RMAN to backup the second instance. It looks to me that the backup is only done to the first instance, but not to the second instance. I may be wrong, but I do not see the second instance backup.
Kindly, I request your assistance on the steps/connection to backup the second instance. Thank you so much!! Terry

Distribute to Multiple Locations on File System

Hi,
Is there any way to schedule a publication to multiple file system directories at the same time? When I use the "File System" destination option, it only allows for one directory. I'd like to be able to publish to multiple directories without having to create multiple publications or editing one's destination over and over again.
Thanks,
Cameron

not inside BOE, you'll have to do this outside - maybe using a cron/batch job that will copy files from one location to others
p.s.
And Why? do you need to do this is also interesting

Who else is using new 8.0 Siebel File System Partioning?

Hi All,
Wanted to see if anyone else has successfully implemented multiple file systems in Siebel 8.0?
The process now is different in that Siebel hashes your file name to determine which of the multiple file systems to use instead of search each sequentially like it used to. There is also a utility called sfspartition that you use to move your existing attachments to the correct file system.
There are a number of issues with srfpartition such as the documentation being inaccurate. I am wondering if anyone has successfully implemented and can share their experiences.
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Hi All,
Wanted to see if anyone else has successfully implemented multiple file systems in Siebel 8.0?
The process now is different in that Siebel hashes your file name to determine which of the multiple file systems to use instead of search each sequentially like it used to. There is also a utility called sfspartition that you use to move your existing attachments to the correct file system.
There are a number of issues with srfpartition such as the documentation being inaccurate. I am wondering if anyone has successfully implemented and can share their experiences.
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

How to create a 2 digit (gigabyte) file system to be used for 3 digit tiny size files and not running out of inodes

I have a 83Gb file system that apparently is not full, but its actually full, because I have run out of inodes, and I have 10 million files in there, so I want to create another that will cater for this inode issue. My question is if I use the
newfs -T
option will it work? As its only going to be 90Gb?

You use probably a UFS file system, right ? Then in this case, use the "-i" option with a value less as 8192. 8192 is the default value for a UFS filesystem that is between 3GB and 1 TB size.
But if you want to store 10M of files, UFS will be limited to 1M per TB : 64-bit: Support of MultiterabyteUFS File Systems (System Administration Guide: Devices and File Systems)
In this case, use instead UFS a ZFS filesystem that supports 2^48 entries !!!

Using ufsrestore on multiple file systems

Similar Messages

Maybe you are looking for