Query on Custom schema table getting 'Do You want to save changes' message

Hi all,
I am getting the error message whenever I query from the custom table. Here is the description of the issue.
1. I have a button on the first block. When the user clicks on this button , execute_query is called on another block. Then the user getting the message "do you want to save the changes" . Although there are no changes made on the form.
2. The second block is based on a custom table defined on the custom schema.
3. Created public synonym for this table and also gave the all the grants to apps schema on this table.
4. This error was not coming before when the second block is based on Apps schema table.
Any idea on how to fix this.
Thanks

I doubt the problem is related to a schema or public synonym. The message is appearing because the value for an item is being changed after your query executes.
First check to make sure that the blocks that are not based on a table are set to No. See the Database Data Block Property.
If that doesn't solve the problem, then run the debugger and watch to see what item is changing. You may be doing something in a trigger.

Similar Messages

Getting Do you want to save changes while pressing F11

Hello,
I created one Custom Form by using template.fmb. In that 2 database blocks and 2 control blocks. In database blocks also couple of items are non database items. When ever I open the form from Oracle Applications and pressing F11 with out doing any changes then it is prompting for Do you want to save changes? If i am pressing Yes then (in my form i am using sequence). that one is generating and saving. After saving it is going into enter query mode.
Can you please help me out how to avoid this message and why this message is coming.
Regards,
Akash Vandan

You are getting this problem because you are probably modifying one of the fields in PRE or WHEN-NEW triggers. Just check if you have assigned any value to the fields using. you can search for colon (:).
Just delete that part of code and your form will work fine.
Regards,
Ashish Kanak

Keep Getting 'Do you want to save changes Msg'

Hi all
Have a small form, two multi-record blocks, everything works ok, have no commits or anything in it but keep getting the message 'do you want to save changes?' if I clear query or exit form, if I press yes I get frm-40400 X amount of records saved when nothing has been changed.
I have another very similar form project more or less the same but with only one block and it doesn't do this??
Any ideas?
Andrew

I have used built in exit_form on a key exit form trigger and this has stopped message when I exit form.
exit_form(no_commit, no_validate);
But when I clear the query the 'Do you want to save' message still appears and also a message at the bottom left saying:
Press CTRL + Tab to move between choices, ENTER to select.

Do you want to save changes message while close pdf

hi everyone...
I am very new to PDF programming
basically I wrote my program in notepad and I saved it as .pdf format
but when I open it and try to close it..it showing me pop up like do you want to save changes..which is I dont want to happen...
is any one have idea what changes i have to do or how i make my file readonly....
thnks in advance...

thanks Irosenth,
Well my requirement is very small.....
I am not using many XObjects In my program except one which is for Image
ok Following code , I copied from PDF refe tutorials. Even that is also not working(Asking me for Save before close).. can anyone correct xref to avoid that error
%PDF-1.4
1 0 obj
<< /Type /Catalog
/Outlines 2 0 R
/Pages 3 0 R
>>
endobj
2 0 obj
<< /Type /Outlines
/Count 0
>>
endobj
3 0 obj
<< /Type /Pages
/Kids [4 0 R]
/Count 1
>>
endobj
4 0 obj
<< /Type /Page
/Parent 3 0 R
/MediaBox [0 0 612 1000]
/Contents 5 0 R
/Resources << /ProcSet 6 0 R >>
>>
endobj
5 0 obj
<< /Length 883 >>
stream
% Draw a black line segment, using the default line width.
150 250 m
150 350 l
S
% Draw a thicker, dashed line segment.
4 w% Set line width to 4 points
[4 6] 0 d% Set dash pattern to 4 units on, 6 units off
150 250 m
400 250 l
S
[] 0 d% Reset dash pattern to a solid line
1 w % Reset line width to 1 unit
% Draw a rectangle with a 1-unit red border, filled with light blue.
1.0 0.0 0.0 RG% Red for stroke color
0.5 0.75 1.0 rg% Light blue for fill color
200 300 50 75 re
B
% Draw a curve filled with gray and with a colored border.
0.5 0.1 0.2 RG
0.7 g
300 300 m
300 400 400 400 400 300 c
b
endstream
endobj
6 0 obj
[/PDF]
endobj
xref
0 7
0000000000 65535 f
0000000009 00000 n
0000000074 00000 n
0000000120 00000 n
0000000179 00000 n
0000000300 00000 n
0000001532 00000 n
trailer
<< /Size 7
/Root 1 0 R
>>
startxref
1556a
%%EOF
xref
5 1
0000000179 00000 n
trailer
<<
/Root 1 0 R
>>
thanks in advance.

Getting: Do you want to save changes? When there are no changes?

Forms [32 Bit] Version 10.1.2.3.0 (Production)
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
I have a form that always prompts me if I want to save changes after querying a record and then exiting or trying a new query. I cannot figure out what changes it is asking if I want to save as nothing has been changed on the form. Is there a way to track what is causing this or where it is coming from?

Are the "Non-Database" items part of a base table block? If so, when you assign a value to these items - even though they are non-database items - Forms will record that the something in >the block has changed. Hi Craig, thats not true. You can change non-db-items in a base-table-block without the record-status beeing changed. Changeing the record-status only happens when the property "Lock record" is set to true, or if there is a WHEN-VALIDATE-ITEM-trigger on the non-db-item which changes a db-item.
You should always have put non-base table items in a Control Block.Thats also not true. You have non-base-table-items in nearly every basetable-block, think of all the lookup-items. How would you synchronize records in your db-block and your control-block?

Do you want to save changes - appears twice in master-detail form.

Hello.
Sometimes ago i wanted "Do you want to save changes" message in my own language.
So i created trigger:
if :system.form_status IN ('CHANGED') then
     alert_response := show_alert('CHANGES');
     if alert_response = alert_button1 then
          commit_form;
     elsif alert_response = alert_button2 then
          clear_block(no_commit);
     elsif alert_response = alert_button3 then
          raise form_trigger_failure;
     end if;
end if;
I call that trigger in many other triggers like enter_query, ...
Everything worked fine until i created form with master_detail block.
The problem:
I have a form with two blocks. One master, one detail.
If i change something in detail block, go to master block item and press enter_query problem appears.
First i get the message "Do you ..." in my language. When i press NO or CANCEL i get again the message "Do you ..." in original (english) language?
Why is that?
Should i call my trigger somewhere else and not just in enter_query trigger (for this problem) or is checking form_status not enough?
Thanks.

When you create relation, 3 procedures are automatically created for you.
Check_Package_Failure, Clear_All_Master_Details and Query_Master_Details.
When you execute clear_block(no_commit) on the master block -
Clear_All_Master_Details will fire.
If you check Clear_All_Master_Details you will find following code there:
Go_Block(curblk);
Check_Package_Failure;
Clear_Block(ASK_COMMIT); -- This statement causing "Do you want to save changes" to appear

I am getting Do you want to save .....?

Hello world ,
i am facing this problem ,
each time i open the form and just do query when i want to exit i am getting do you want to save the changes you have make ?
help

Hi,
You can bypass this message, this comes because some database item is modified in the post-query, and the record/block status is changed. Use set record property and set the record status back to query mode from changed. I think this should solve your problem.

Customizing default message "Do you want to save changes you have made?"

Hi all
Can I customize the default message generated by oracle forms "Do you want to save changes you have made?"
I want to change its title, message, alert style, button labels, and visual attribute. And functionality.
Thanks
Asad.

Of course ON-MESSAGE will not work. Use the trigger on your Exit_Form button. Then check the form or block or record status (depending on your design) and do appropriate coding, something like this:
IF :System.Form_Status = 'CHANGED' THEN
retCode := Show_Alert('MY_EXIT_ALERT');
if retCode = ALERT_BUTTON2 THEN
Exit_Form(NO_VALIDATE);
elsif retCode = ALERT_BUTTON1 then
Commit_Form;
else
Whathever_It_Is;
end if;
end if;
If you have master-detail block and u're recieving the message when detail is changed but u want to scroll master records - write me a mail to tell u which trigger to use. It is not that I don't want to share info - just can't recall right now.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

Master-detail raises Do you want to save changes

Dear all,
my form is of 1 master block and 3 details to that block, now whenever i tried to exit the form a Do you want to save changes? message is displayed but whenever i delete any one of the relations the message doesn't appear..
plz any help is appreciated

The problem is that some of the records are marjed as dirty - If you're not actually changing anything manually and you still get the error, then check that you've not got any POST-QUERY triggers updating DB fields or the use of LOV for validation which can also mark a record as dirty.
You can of course supress / ignore the DYWTC message using EXIT_FORM(NO_VALIDATE) or similar, but you'lll probaly want to double check the cause of the record update first.

Do you want to save changes you have made

hi guys,,
I need ur help
I ve a form which retrieve employee data,,
there are 8 blocks in the form,,
i created a when mouse click trigger to show a LOV
declare
a boolean;
begin
a:=show_lov('TEST');
pc_execute; -- calling a procedure
END;
but it gives Do you want to save changes you have made?
and I tried to suppress this by setting system message level = 25
but no benifit,,
And if I write :
declare
a boolean;
begin
a:=show_lov('TEST');
GO_BLOCK('ORG_EMP_INCREMENT_HISTORY');
pc_execute; -- calling a procedure
END;
the message will disappear but the query will not execute all blocks
ANY suggestions
Best Regards

Al-Salmau Alikum We Rahamatu Allah We Barakatu...
if u wanna getting ur total records of emp block then do this as an example ...
FUNCTION query_count (p_block_name VARCHAR2) RETURN NUMBER
IS
cnt NUMBER;
BEGIN
GO_BLOCK(p_block_name);
COUNT_QUERY;
cnt := GET_BLOCK_PROPERTY(p_block_name, QUERY_HITS);
IF FORM_SUCCESS THEN
    RETURN (cnt);
ELSE
    MESSAGE('Error in getting Query Hits for block '||:SYSTEM.CURRENT_BLOCK);
    RAISE FORM_TRIGGER_FAILURE;
END IF;
END;and notice the result in the status bar...
But if u wanna have data it's another issue...
so u have to do for example...
IF NOT Id_Null(blk_id) THEN
    Set_Block_Property('block_name',DEFAULT_WHERE,'emp_id = ' || emp_id);
   Execute_query;
   ELSE       Message('You have a problem!');
RAISE Form_Trigger_Failure;
END IF; Hope this helps...
Regards,
Abdetu..

'Do you want to save changes you have made' while closing the form

Hi Everyone,
I am working on Oracle Applications 11.5.10.2 version. I have created a new form as per the client requirement and registered with APPS. I met all the requirements, but when ever closing the form getting the error 'Do you want to save changes you have made' without entering or modifying records in he form.
Please help in this regard, bit urgent.
Thanks in Advance..
Venky.

Hi,
You can suppress messages depending on their message level. For a full description and examples on this topic, please see the help in Forms Builder (press F1 in your Builder) and search for :system.message_level.
or the other way would be.
As you are using the copy command for moving the data from one block to the other block , the status of the block will be changed to "Modified".As per oracle standards when every the block status is modified it fire the meassage 'Do you want to save changes you have made' .
To avoid the message you need to change status of each line to "Query" .Once you do this the block status automatically changes to "query" .Once it is in query mode when you try to close the form it will not pop-up the above message.
To change the line status use POST command . To get help on this command you can use form builder help.
Hope this serves your purpose.
Let me know if you need any further clarification.
Rgds,
Naveen.

Adobe Reader X (free) -- "Do you want to save changes" prompt

Why is this prompt always coming up when I close a PDF document?
"Do you want to Save Changes to X Before closing?"
I am using the free Adobe Reader X 10.1.1. I can't make any changes to the file since it's the free version, so why is it asking me to save changes? Even if I just open the file and just close it right away without doing anything else the prompt comes up.

I think pretty much any PDF created by CutePDFWriter did that (as well as others not created that way, but CutePDF seemed to do it reliably).
To verify that I'd have to un-install 9.5.0 and re-install Reader X, which I'd rather not do (9.5.0 is better in other ways too - the integration with Chrome is nicer because the "print" and "save as" buttons always appear; they hardly ever appeared in Reader X when opening a PDF from Chrome).
You can get CutePDFWriter here: http://www.cutepdf.com/products/cutepdf/writer.asp
Let me know if you can't reproduce the problem (just post here) and I'll un-install/re-install, verify a file with the problem, and post it.
For now I'm very happy with Reader 9.5.0; it's perfect.

Supress Prompt 'do you want to save changes to the design of form...

Using Access 2007 SP2.
I have an unbound main form(Master page) with a datasheet subform in an mdb.
Close button is on the main form with the following code
DoCmd.Close acForm, Me.Name, acSaveNo
I have tried with multiple scenarios but none of them got succeed(Below are those)
set SourceObject property to "" while Unload
SetWarnings False in Form_load
When I close the form I am prompted with 'do you want to save changes to the design of form...'
Is there any way to suppress this annoying message?
Can anyone help on this
Thanks in advance

When I close the form I am prompted with 'do you want to save changes to the design of form...'
Which form is it prompting you about saving, the main form or the subform? If you close the main form with "DoCmd.Close acForm, Me.Name, acSaveNo", I wouldn't expect you to get a prompt about saving changes to that form. But I could
see you getting a prompt about saving design changes to the subform. Are you making any design changes to the subform while in form view, such as filtering, sorting, column-resizing, etc?
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html

Do you want to save changes button code

Hi guys,
Quick question which I was wondering if anyone could help me out. When a form has changed and you press the x button you get the message do you want to save changes? with a yes or no option. Is it possible to put code in to trigger of these yes/no buttons when clicked and if so how would I go about doing this?
Thanks.

hello
if i got your need so you will need to create alert
then start coding
examlpe
1- create alert called save_record
2- in key exit trigger write this code
DECLARE
al_id Alert;
al_button NUMBER;
BEGIN
al_id := Find_Alert('save1');
IF Id_Null(al_id) THEN
Message('User_Warning alert does not exist');
RAISE Form_Trigger_Failure;
ELSE
/* ** Show the warning alert */
al_button := Show_Alert(al_id);
** If user pressed OK (button 1) then bring up another
** alert to confirm -- button mappings are specified
** in the alert design */
IF al_button = ALERT_BUTTON1 THEN
al_id := Find_Alert('Are_You_Sure');
IF Id_Null(al_id) THEN
Message('The alert named: Are you sure? does not exist'); Message('The alert named: Are you sure? does not exist');
commit;
exit form;
RAISE Form_Trigger_Failure;
ELSE
al_button := Show_Alert(al_id);
IF al_button = ALERT_BUTTON2 THEN
null;
END IF;
END IF;
END IF;
END IF;
END;
Edited by: Khaled Farouk on 27-May-2013 07:09

Query on Custom schema table getting 'Do You want to save changes' message

Similar Messages

Maybe you are looking for