Query on sql query -- STRIKER

Hi,
I have table say emp_dept details which is having 2 columns say emp_no and dept_no. The table along with data looks like as below :
emp_dept
dept_no emp_no
10 1
10 2
10 3
20 4
20 5
20 6
How can i get the output like as mentioned below using sql query:
emp_dept
dept_no emp_no
10 1,2,3
20 4,5,6
Could you please guide me on the above query?
Many thanks for your help in advance.
Regards,
STRIKER
Edited by: 1000596 on Apr 17, 2013 3:33 AM

1000596 wrote:
Hi,
I have table say emp_dept details which is having 2 columns say emp_no and dept_no. The table along with data looks like as below :
emp_dept
dept_no emp_no
10 1
10 2
10 3
20 4
20 5
20 6
How can i get the output like as mentioned below using sql query:
emp_dept
dept_no emp_no
10 1,2,3
20 4,5,6
Could you please guide me on the above query?
Many thanks for your help in advance.
Regards,
STRIKER
Edited by: 1000596 on Apr 17, 2013 3:33 AMHi,
You can use LISTAGG Function
SELECT DEPTNO, LISTAGG(TO_CHAR(EMPNO), ', ') WITHIN GROUP (ORDER BY DEPTNO) AS EMPNO FROM EMP
GROUP BY DEPTNO;This function comes after oracle database 11g,
What is your version?
Thanks
Mahir M. Quluzade

Similar Messages

Advantage of SQL Query (Strucutred Query) over SQL Query

What is the advantage of a Region Type 'SQL Query (Structured Query)' over 'SQL Query'?
I just became curious when comparing the results of the Master Detail Wizard, and the Report and Form Wizard.

Greg,
From a functionality standpoint, there are no advantages one has over the other. "Structured queries" are the result of you stepping through the easy report wizard. This means you didn't have to know the SQL required to produce the result set you're after. Creating a SQL report requires knowledge of SQL.
Sergio

Modes and Methods in Tag Query and SQL Query

Hi,
Can someone explain me about the modes available in TAG Query and SQL Query.
TAG Query has modes such as Current, CurrentWrite, GroupList, History, HistoryEvent, ModeList, Statistics and TagList
SQL Query i still have doubt on FixedQuery with output , Modelist and TableList
I also need to know why methods are used?
Thanks in advance
Regards
Muzammil

I'll try to explain to the best of my knowledge :
TagQuery
Current : Gives you the current value of the Tag you are reading.
CurrentWrite : Let you write a Value as the Current Value of the Tag.
GroupList : Generally Tags are grouped under different groups. Returns you the name of the Groups.
From the xMII Help Document :
History : History Mode returns interpolated data. Interpolation can be accomplished by specifying either the # of rows desired or the retrieval resolution. If the mode is "History" and a value is provided for the Resolution parameter (which is in seconds), the connector will retrieve evenly-spaced values starting at the beginning of the time interval, up to the maximum # of rows specified in the RowCount parameter. If no value is provided for the Resolution parameter, the connector will return an evenly-spaced number of values based on the value of the RowCount parameter.
For example, if the time interval is 1 hour, Resolution is 15, and RowCount is 240, the connector will return evenly spaced values each 15 seconds, up to 240 values (which would span the entire hour).
If the time interval is 1 hour, Resolution is not provided or is set to zero, and RowCount is 120, the connector would return 120 evenly spaced values, at an effective interval of 30 seconds.
HistoryEvent Mode : The connector can provide historical values "as they were stored" the database. This mode provides no interpolation of values.
Statistics Mode : When retrieving data for statistical calculations, the connector utilizes the same techniques as in the "HistoryEvent" mode. It is important to note that the first two returning columns in the HistoryEvent query must be the timestamp and the value, in that order. The SAP xMII Statistical processor expects that order, or errors will occur. This ensures precision of statistical measurements, particularly time-weighted average, by using the exact storage time and values from the historical database. The SAP xMII system provides the statistical calculations.
Modelist : Basically returns the modes of the Query Available. The Data returned is same as the data in the Modes list in the Quert Template Editor.
Taglist : Returns all the Tags in the Datasource.
SQL Query
Modelist : Same as above.
TableList : List of all the tables in the database to which the connector connects.
Again from SAP xMII Help Documentation :
FixedQueryWithOutput : This mode is used to execute an Oracle stored procedure or function that returns a REF CURSOR as output. The position of the REF CURSOR is marked by a "?" in the query. For example:
Create a table.
create table usage (id int, name varchar(50));
insert into usage (id, name) values (1, 'test1');
insert into usage (id, name) values (2, 'test2');
insert into usage (id, name) values (3, 'test3');
insert into usage (id, name) values (4, 'test4');
insert into usage (id, name) values (5, 'test5');
insert into usage (id, name) values (6, 'test6');
insert into usage (id, name) values (7, 'test7');
insert into usage (id, name) values (8, 'test8');
Define the stored procedure.
DROP PACKAGE foopkg;
CREATE PACKAGE foopkg IS
TYPE cursortype is ref cursor;
PROCEDURE test (mycursor in out cursortype);
END foopkg;
CREATE PACKAGE BODY foopkg IS
PROCEDURE test (mycursor in out cursortype) AS
BEGIN
open mycursor for select * from usage;
END;
END foopkg;

Define a query template for calling the stored procedure. Enter the following in the FixedQuery tab:
call foopkg.test(?)
This template returns all rows from the Usage table.

ORA-00904 ON A PLSQL QUERY RETURNING SQL QUERY ( NOT ALWAYS )

Running a classic report , we sometimes face the error :
<pre>failed to parse SQL query:
ORA-00904: : invalid identifier
Even when using the same parameters, sometimes the report runs and some others we get the error.
The report is called by a url from a different page
f?p=&APP_ID.:500:&APP_SESSION.:FLOW_EXCEL_OUTPUT_R&P503_RUN_REGION_ID._el:NO::P500_RUN_RG,P500_RG11_FILTER1:1,&P503_FILTER1.
THE EVNVIRONMENT IS THE FOLLOWING
ORACLE DATABASE 11g Enterprise Edition Release 11.2.0.2.0 -64bit
Apex Application Express 4.1.0.00.32
In the apex on the same workspace we have 2 copies of the same application having different schema.
We did not face this problem in Oracle 10g

hello,
I send you the function. rs_check_limit .
In one case when i tried to debug in order to understand the error, the function was not fired.
FUNCTION rs_check_limit ( p_trade_date_from date
, p_trade_date_to date, p_session_id number , p_user_id varchar2
, p_pct_sum_prcp_cd number
,p_rs_list_exclude varchar2 default ' '
return rs_check_limit_tb PIPELINED
is
v_data rs_check_limit_tp :=rs_check_limit_tp ( null, null,null, null,null, null,null, null,null, null );
CURSOR exec_trades_prcp_cur (vc_risk_date_from date
, vc_risk_date_to date
, vc_rs_list_exclude varchar2
is
select PRCP_CD
, clr_sys_cd
, clr_acc_cd
,avg( exec_trades_value_mkt ) avg_exec_trades_prcp
,SUM( exec_trades_value_mkt ) sum_exec_trades_prcp
from
select trd_dt, PRCP_CD , clr_sys_cd
, clr_acc_cd , sum ( exec_trades_value_mkt ) exec_trades_value_mkt
from
select lst_cmpt_dt trd_dt , PRCP_CD , clr_sys_cd
, clr_acc_cd
,SUM (BUYS_VALUE+ SELLS_VALUE) exec_trades_value_mkt
from rs_mm_rsk_lmts_dtls
where 1=1
and lst_cmpt_dt > vc_risk_date_from -1
and lst_cmpt_dt <= vc_risk_date_to
and instr( vc_rs_list_exclude, TRIM(clr_acc_cd)|| '.')= 0
group by lst_cmpt_dt , PRCP_CD , clr_sys_cd
, clr_acc_cd
UNION ALL
select trunc ( apx_rs_risk_info.get_d_n_cur (lst_cmpt_dt,- 1) ) trd_dt , PRCP_CD , clr_sys_cd
, clr_acc_cd, SUM (BUYS_VALUE+ SELLS_VALUE) exec_trades_value_mkt
from rs_mm_rsk_lmts_dtls
where trd_dt = apx_rs_risk_info.get_d_n_cur ( lst_cmpt_dt , 2 )
and lst_cmpt_dt > apx_rs_risk_info.get_d_n_cur (vc_risk_date_from ,1 )-1
and lst_cmpt_dt < vc_risk_date_to
and instr( vc_rs_list_exclude, TRIM(clr_acc_cd)|| '.')= 0
group by apx_rs_risk_info.get_d_n_cur (lst_cmpt_dt , -1 ) ,PRCP_CD , clr_sys_cd
, clr_acc_cd
group by trd_dt, PRCP_CD , clr_sys_cd
, clr_acc_cd
group by PRCP_CD , clr_sys_cd
, clr_acc_cd
CURSOR exec_trades_all_cur (vc_risk_date_from date
, vc_risk_date_to date
, vc_rs_list_exclude varchar2)
is
select SUM( exec_trades_value_mkt ) sum_exec_trades_all -- óõíïëéêÞ çìåñÞóéá áîßá óõíáëëáãùí áãïñÜò
, avg( exec_trades_value_mkt ) avg_exec_trades_all
from
select trd_dt, sum( exec_trades_value_mkt ) exec_trades_value_mkt
from
--gia T : T, T-1 , T-2
select lst_cmpt_dt trd_dt , SUM (BUYS_VALUE+ SELLS_VALUE) exec_trades_value_mkt
from rs_mm_rsk_lmts_dtls
where 1=1
and lst_cmpt_dt > vc_risk_date_from -1
and lst_cmpt_dt <= vc_risk_date_to
and instr( vc_rs_list_exclude, TRIM(clr_acc_cd)|| '.')= 0
group by lst_cmpt_dt
union all
--gia T EPIPLEON: T-3
select apx_rs_risk_info.get_d_n_cur (lst_cmpt_dt,-1) trd_dt , SUM (BUYS_VALUE+ SELLS_VALUE) exec_trades_value_mkt
from rs_mm_rsk_lmts_dtls
where trd_dt = apx_rs_risk_info.get_d_n_cur ( trunc ( lst_cmpt_dt ) , +2 )
and lst_cmpt_dt > apx_rs_risk_info.get_d_n_cur (vc_risk_date_from ,1 )-1
and lst_cmpt_dt < vc_risk_date_to
and instr( vc_rs_list_exclude, TRIM(clr_acc_cd)|| '.')= 0
group by apx_rs_risk_info.get_d_n_cur (lst_cmpt_dt , -1 )
group by trd_dt
exec_trades_prcp_row exec_trades_prcp_cur%rowtype;
exec_trades_all_row exec_trades_all_cur%rowtype;
i number := 0;
tmp varchar2(4) := null;
procedure feed_table is
BEGIN
v_data.prcp_cd := exec_trades_prcp_row.prcp_cd;
v_data.clr_sys_cd := exec_trades_prcp_row.clr_sys_cd;
v_data.clr_acc_cd := trim(exec_trades_prcp_row.clr_acc_cd);
v_data.member_id := RS_GET_PRCP_MEMBER_ID(exec_trades_prcp_row.prcp_cd);
v_data.member_dsc := RS_GET_PRCP_DSC(exec_trades_prcp_row.prcp_cd);
v_data.sumTRADES_VALUE_PRCP_CD_T := round( exec_trades_prcp_row.sum_exec_trades_prcp,2);
v_data.mkt_sumTRADES_VALUE_PRCP_CD_T := round( exec_trades_all_row.sum_exec_trades_all,2) ;
v_data.avgTRADES_VALUE_PRCP_CD_T := round( exec_trades_prcp_row.avg_exec_trades_prcp,2);
v_data.mkt_avgTRADES_VALUE_PRCP_CD_T := round( exec_trades_all_row.avg_exec_trades_all,2) ;
v_data.pct_sum_prcp_cd := round( 100* exec_trades_prcp_row.sum_exec_trades_prcp
/ exec_trades_all_row.sum_exec_trades_all , 2);
end ;
begin
exec_trades_all_row := null;
open exec_trades_all_cur (vc_risk_date_from => p_trade_date_from
, vc_risk_date_to => p_trade_date_to
,vc_rs_list_exclude => NVL(p_rs_list_exclude ,'.' )
fetch exec_trades_all_cur INTO exec_trades_all_row;
close exec_trades_all_cur;
for exec_trades_prcp_rec in exec_trades_prcp_cur (vc_risk_date_from => p_trade_date_from
, vc_risk_date_to => p_trade_date_to
,vc_rs_list_exclude => NVL(p_rs_list_exclude ,'.' )
loop
exec_trades_prcp_row := exec_trades_prcp_rec;
if exec_trades_all_row.sum_exec_trades_all <> 0 then
if 100* exec_trades_prcp_row.sum_exec_trades_prcp
/ exec_trades_all_row.sum_exec_trades_all >= p_pct_sum_prcp_cd then
i := i+1;
v_data :=rs_check_limit_tp ( null, null,null, null,null, null,null, null,null, null );
feed_table;
pipe row ( v_data );
end if;
end if;
end loop;
end;
I send you the dll for the type
CREATE OR REPLACE
TYPE rs_check_limit_tp as object
prcp_cd varchar2(10)
, member_id varchar2(4)
, member_dsc varchar2(120)
, clr_sys_cd varchar2(4)
, clr_acc_cd varchar2(6)
, avgTRADES_VALUE_PRCP_CD_T number
, mkt_avgTRADES_VALUE_PRCP_CD_T number
, sumTRADES_VALUE_PRCP_CD_T number
, mkt_sumTRADES_VALUE_PRCP_CD_T number
, pct_sum_prcp_cd number
and the table dll
CREATE TABLE rs_mm_rsk_lmts_dtls
(trd_dt DATE NOT NULL,
prcp_cd VARCHAR2(10 BYTE) NOT NULL,
clr_sys_cd CHAR(4 BYTE),
clr_acc_cd CHAR(10 BYTE),
sec_isin_cd VARCHAR2(12 BYTE) NOT NULL,
buys NUMBER(19,0),
sells NUMBER(19,0),
buys_value NUMBER(19,6),
sells_value NUMBER(19,6),
abs_b_minus_s NUMBER(19,2),
rsk_prc NUMBER(13,6),
net_value NUMBER(19,2) NOT NULL,
sr NUMBER(19,2) NOT NULL,
mm NUMBER(19,2) NOT NULL,
lst_cmpt_dt DATE,
usr_id VARCHAR2(8 BYTE) NOT NULL,
cmt VARCHAR2(64 BYTE),
chg_dt DATE,
gr_b NUMBER(19,2) NOT NULL,
gr_s NUMBER(19,2) NOT NULL)
Thank you
Tonia

Query on SQL query !!!

I have written an sql query which executes properly but i am not able to find out the reason why?[b]
A similar dummy query is as given below
select A.col1,
CASE WHEN A.col2 IS NULL
THEN
Select A.Col3 -- [b](1)[b]
From B
Where B.col1 = A.col4
ELSE NULL
END
From A
Please notice (1) where i select a column from table A but give table B in the from clause.
a.) How is this working?
b.) What is the order in which the SQL execution would work?
c.) What would happens to the rows from Table B in that inner SQL?
Some one please throw some light.
Message was edited by:
Sam Perera

It will work as expected if syntax errors are corrected :
SQL> select A.ename,
2 CASE WHEN A.comm IS NULL
3 THEN
4 (Select A.ename
5 From emp1 b
6 Where B.empno = A.empno)
7 ELSE NULL
8 END
9 From emp A;
ENAME      CASEWHENA.
SMITH      SMITH
ALLLEN
WARD
JONES      JONES
MARTIN
BLAKE      BLAKE
CLARK      CLARK
SCOTT      SCOTT
KING       KING
TURNER
ADAMS      ADAMS
ENAME      CASEWHENA.
JAMES      JAMES
FORD       FORD
MILLER     MILLER
TEST       TEST
15 rows selected.

Link Tag Query to SQL Query

I have tag values that are steps or alarm codes in a process and I want to create a cross reference SQL table for these values. Using BLS, how do you link these tables to have an Xacute query that will return the cross referenced values from the tag?
I appreciate any help that can be provided.
Thanks
Larry

Rick,
One other note I missed in my last e-mail, the Tag Query does not return the TagName as a value in a column but as the column header for the value of the tag. How is it possible to get this as the value of its own column to be used as a link in the Joiner action.
Current query returns
DateTime                              XV43003     -
(header row)
03/22/2007 03:30:00                     0
03/22/2007 03:31:00                     2
03/22/2007 03:32:00                     8
Preferred method
DateTime                              TagName         Value     -
(header row)
03/22/2007 03:30:00              XV43003              0
03/22/2007 03:31:00              XV43003              2
03/22/2007 03:32:00              XV43003              8
This would give me both the tagname and value to join to the sql table.
Thanks for your help!
Larry

Query regading SQL query

Post Author: abhishek chowdhury
CA Forum: JAVA
H i , i want to display the reports of business enterprise types Currently I have the following query with me String query = "Select SI_NAME, SI_ID, SI_DESCRIPTION, SI_UPDATE_TS From CI_INFOOBJECTS Where " + "SI_KIND='CrystalReport'"; this query results in reports of CrystalReport type. Now i want to know what modification i need to do to get reports of type BusinessEnterprise

Hi,
Whenever you'd like help, post a little sample data (CREATE TABLE and INSERT statements), and also post the results you need from that data.
It always helps to post your best attempt, especially when the problem looks like school work.
For #2, are you supposed to get
(a) exactly one row of output for every student who is enrolled, or
(b) at least one row of output for every student, one for each course in which the student is enrolled
It looks like your solution is for (b).

How to build sql query for view object at run time

Hi,
I have a LOV on my form that is created from a view object.
View object is read-only and is created from a SQL query.
SQL query consists of few input parameters and table joins.
My scenario is such that if input parameters are passed, i have to join extra tables, otherwise, only one table can fetch the results I need.
Can anyone please suggest, how I can solve this? I want to build the query for view object at run time based on the values passed to input parameters.
Thanks
Srikanth Addanki

As I understand you want to change the query at run time.
If this is what you want, you can use setQuery Method then use executeQuery.
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/oracle/jbo/server/ViewObjectImpl.html#setQuery_java_lang_String_

How to include lexical parameters in IN string in SQL QUERY BUILDER ?

Hi,
I have to write an SQL Query in SQL QUERY BUILDER in Reports 6i to retrieve all details pertaining to donor codes i insert randomnly at runtime.
The Statement is like this
SELECT TITLE_TAB.TITLE_CODE,DONOR_TAB.DONOR_CODE, DONOR_TAB.FIRST_NAME,DONOR_TAB.MIDDLE_NAME,DONOR_TAB.LAST_NAME,CITY_MASTER_TAB.CITY_CODE FROM DONOR_TAB,CITY_MASTER_TAB,TITLE_TAB
WHERE DONOR_CODE IN (1,2,6,70,....)
I cannot use lexical parameter '&' in SQL QUERY BUILDER as i have to use bind variable donor_code.
How do i do it?

How do i do that? Can you give me an example of how i can go about with it?

SQL Query (updateable report) - Can't figure out how to make one

Hi folks,
Can someone tell me how to make a report where the data can be updated? Not an interactive report, a SQL report that selects only one row. The only options in the drop down I see are "SQL Query" and "SQL Query (PL/SQL function body returning SQL query)", but I have a report elsewhere that says it's type is "SQL Query (updateable report)", but I can't remember how to do it :(
Thanks very much,
-Adam

Hi Adam,
An Updatable Report is a "Tabular Form" - see: http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/frm_tabular.htm#CHDFBHDB
Andy

Change "SQL Query" report to "SQL Query (updateable report)" report?

I manually made a report, because the tabular report made by the wizard gave me no possibility to use a popup LOV. Now I have this report, but I cant apply an MRU process on it, becuase it's not an "SQL Query (updateable report)". How can I change my report to a "SQL Query (updateable report)"? I only can choose between SQL Query and SQL QUERY (PL/SQL function body returning SQL query).

Hi Tom
You can just write the processes yourself. Although trickier this can give you a lot more control over row processing.
APEX_APPLICATION.G_F01, F02 etc are global variables in the apex_application package that are defined as arrays.
These are regularly used in tabular forms to reference values within them. The normal ordering would be column 1 = G_F01, column 2 = G_F02 etc etc. Although you can change these and even assign more than one column to an array.
The example
FOR i IN 1..APEX_APPLICATION.G_F01.COUNT LOOP
INSERT INTO my_table VALUES(:P1_EMPID , APEX_APPLICATION.G_F01(i));
END LOOP;Is saying - for the number of values in the array G_F01 (probably column 1) loop insert into the table the value of the associated value in the array. So first time through i=1 - so the first value in the array (probably row 1 in column 1), next time i=2 so the second value in the array is used (probably row 2 in column 1) and so on...
When you've created a manual tabular form (what I would call what you've done) you have created the items using the APEX_ITEM package in your query. The first parameter for this is p_idx which defines which global array to hold it in.
Cheers
Ben

Bold/Color function in SQL query

Hi Experts,
Can you tell me the syntax code of how to give the color or make the font bold to perticular field values through SQL Query?

SQL query is only for Data value. If you need Bold/Color or other format function, go to XL Report, Crystal Report or by any other tools.
Thanks,
Gordon

How to convert MDX query to SQL

Hi everyone,
can you please suggest me, how to convert the below mdx query to sql query. can you please tell me what it is doing?
CREATE MEMBER CURRENTCUBE.[Measures].[calculation]
AS IIF(([Measures].[Clear Call Count],[Trouble Code].[Is Battery].&[Battery T-Code],[Service Provider].[Is Towmark].&[Towmark],[Provider Technician].[Is Towmark].&[Towmark]) = 0, NULL,
([Measures].[ Total Shipped],[Service Provider].[Is Towmark].&[Towmark],[Provider Technician].[Is Towmark].&[Towmark])/
([Measures].[Clear Call Count],[Trouble Code].[Is Battery].&[Battery T-Code],[Service Provider].[Is Towmark].&[Towmark],[Provider Technician].[Is Towmark].&[Towmark])),
FORMAT_STRING = "Percent",
VISIBLE = 1 , ASSOCIATED_MEASURE_GROUP = 'Sale';
Thanks
Vishu

Hi Vishu,
As Olaf said, this is a calculated member which used in MDX script in your cube, we cannot execute it in SQL Server Management Studio directly. Here are some document about calculated members and MDX script for your reference.
Defining Calculated Members
MDX Scripting Fundamentals (Analysis Services)
Regards,
Charlie Liao
TechNet Community Support

Need Heip For SQL Query

Hi Friends,
I am too muchconfused about an sql query. I've created a html page where I select one radio button . The value of this radio button is passed to the query.Now the out put of the query is used in developing the output.
For illustration I show you the source code.
Radio Button Selection page.
<form action="service.html" method="post"> <h3>Services Available</h3> <label> <input type="radio" name="service" value="si" /> Institutions</label> <label> <input type="radio" name="service" value="sc" /> Corporate_Offices</label> <label> <input type="radio" name="service" value="sr" /> Restaurent_Cafe</label> <label> <input type="submit" value="Submit" /> </label> </form>
Now the query page-
<sql:query var="empList" scope="session"> select <c:out value="${param.service}" /> from map_service where cityname = ? <sql:param value="${param.cityname}" /> </sql:query>
Now I need to generate output with the given below value in the next page-
<c:out value="${param.service}" />
This value show value as si, sc sr only where I need the database table value as per selection.
I am really confused that what I should write as <c:out value="${...
My database table has attributes as cityname, si, sc, sr. etc.
when some one select si from radio button the value of radio button is passed to sql query and the value which is selected on the table after query should be used in developing output result please help.

Dear Friend Is it not possible for any of you to give me a clue that if I've to get the output of *?* from the query what I can write in syntax.
<sql:query var="empList" scope="session">
select ? from map_service
where cityname = ?
<sql:param value="${param.service}" />
<sql:param value="${param.cityname}" />
</sql:query>
<c:out value="${empList.param.service}" />Output of the value of ? from the database select ? from map_service Any idea

Named Query or Native Query

Hello,
I am using native query to search for results on my search page. A friend of mine just told me that I better use named query or the time to get my search results will be too slow.
Does Named Query give you faster result than Native Query?
Thanks in advance.
Regards,
Hemen

When you define named queries (note that this is a Hibernate example) you can put them in for example XML,
<query name="findItemsByDescription">
<![CDATA[from Item item where item.description like :desc]]>
</query>or a SQL query like
<sql-query name="findItemsByDescription">
<return alias="item" class="Item"/>
<![CDATA[select {item.*} from item where description like :desc]]>
</sql-query>You can call these queries by using the same code, for example,
session.getNamedQuery("findItemsByDescription").setString("desc", description);This is what is being meant by sharing the same calling API.
When taking about performance. You have to know something about what goes on under the hood.
You have probably programmed something using straightforward JDBC, so you know how to queries
get passed to the driver and send to the database. When using HQL or JPA-QL the queries first have
to be parsed into an SQL language that the database can understand. In this case, we have an extra
parsing step in between. Note that Native SQL queries, including stored procedure calls, the persistence
framework still takes care of mapping the JDBC result sets to graphs of persistent objects.
If you want to include a native SQL hint to instruct the database management systems query optimizer,
for example, you need to write the SQL yourself. HQL and JPA-QL do not have keywords for this.
The disadvantage of putting native SQL in your mapping metadata is lost database portability, because
your mappings, and hence your application, will work only for a particular database. But usually this is of a
minor concern as you are probably not creating a framework that has to work on every database.
When you want to get behind the performance of your query, you really have to consult the database
and look at the execution plan - A DBA can tell you exactly what is good and what can be optimized.

Query on sql query -- STRIKER

Similar Messages

Maybe you are looking for