Query output into cfmail

I need to send an individual email to about 100 names fetched
from an Access 2003 database. I am fetching the distinct emails
from the database and getting each Project owned by each distinct
email address.
I created the correct output on a test web page where the
query will list every distinct email address with each email
address having their own Project Title listing. Now the question is
how do I use my output to send an individual email to each of the
distinct email addresses I got in my query??
For example someone with the email Address of
[email protected] would get one email with his Project Title
listings that could be 3 or 4 titles. The next distinct email
address of [email protected] will get his own email with his
Project title listings.
Here is my attempt but the #userEmail# has everyones email
address.
<cfoutput query = "theQuery" group = "userEmail">
<cfmail to: #userEmail# subject: Project Listing
<cfoutput>Project Listing:
#ProjectTitle#</cfoutput>
<cfmail>
</cfoutput>
Please help.

Jazzy has the correct answer. And if your project listings
reside in seperate tables, you need to run a seperate query within
the loop BUT outside of the cfmail in order to retrieve those. So
that would then be...
<cfquery name="rs_read" datasource="xxx" >
SELECT *
FROM #session.sometable#
WHERE whateverid = '#variables.whateverid#';
</cfquery>
<cfloop index="loopcount" from="1"
to='#rs_read.RecordCount#' step="1">
<cfquery name="rs_projects" datasource="xxx" >
SELECT projects
FROM #session.sometable#
WHERE email = '#rs_read.email#';
</cfquery>
<cfset variables.proj = ''>
<cfoutput query="rs_projects">
<cfset variables.proj = variables.proj & ' ' &
rs_projects.projects>
</cfoutput>
<cfmail from="[email protected]" to="#rs_read.email#"
subject="#rs_projects.whatever#">
bla bla #rs_read.anyvariable#
PROJECTS: #variables.proj#
</cfmail>
</cfloop>
REMEMBER: You can not nest outputs in outputs, that's why you
can not run the query output inside CFMAIL because CF regards
cfmail as an output routine.

Similar Messages

  • Query output into ODI variable

    Hi,
    I want to take the output (multiple rows and multiple columns) into an ODI variable of Text type.
    I have created the variable and put the query and set the variable type as Text type. But when I send the value of this variable to other variable, it comes as blank.
    Can anyone tell me how can I do that
    Thanks in advance
    Arun

    Hello Neha,
    Though i have been working with APDs since some time. But havent actually been involved in designing one. But you could find many documents for the APD on web. And as far as i know, you will need a program to save file from APD.
    I have a document which explains how you can use APD in  process chain. can forward you the same if you want.
    I am sorry as i wasnt of much help for you, as i havent worked on similar requirement before, but this thing just striked in my mind.
    Regards,
    Anuj

  • Query Output Into a Text File

    Hello Experts,
    There is a situation where i need ur help.My query is :
    Can I export the output of more than one queries into a * Single Text File * ?
    Also can it be possible to automate these Queries Output to export into the Text File ??
    I also want this Text File Output to mail the end users by using the Process Chain. So is this possible to create a process chain for sending this Text File to the Users via mail ??
    Thanks In Advance
    Neha

    Hello Neha,
    Though i have been working with APDs since some time. But havent actually been involved in designing one. But you could find many documents for the APD on web. And as far as i know, you will need a program to save file from APD.
    I have a document which explains how you can use APD in  process chain. can forward you the same if you want.
    I am sorry as i wasnt of much help for you, as i havent worked on similar requirement before, but this thing just striked in my mind.
    Regards,
    Anuj

  • Inserting or embed and image into cfmail output from a database-stored path to an actual image.

    I am trying to insert or embed and image into cfmail from a database-stored path to an actual image. The actual JPEG image is stored in a folder called "images_personnel". The path to the image under the column titled photopath is stored in my database table as "/file/images_personnel/28.jpg". Displaying the image on the screen renders without a problem, embedding the same image as part of a cfloop query does not insert/embed the image into an email. All of the other output of the same cfloop displays and emails just fine. However none of the photos of each personelle show up. What an I doing wrong?
    My code is below:
    <cfquery name="Staffreport" datasource="master">
    Select staffreport.*, name.personnelid, name.email, name.last, name.noiid, stafflt, CONCAT(name.fname,' ',name.middle,' (',name.last,')') AS teammember, CONCAT(name.fname,' ',name.middle) AS teammember2, concat(name.photopath,'',name.photo)as hisphoto, stafflt.*, trim(concat(ltfname,' ',ltmiddle)) as LT from Staffreport, name, stafflt
    where 0=0
    and stalt = '#Session.user_id#'
    and ltid = '#session.user_id#'
    and staweekbegin = <cfqueryparam value="#form.staweekbegin#" cfsqltype="cf_sql_date" />
    AND staweekend = <cfqueryparam value="#form.staweekend#" cfsqltype="cf_sql_date" />
    AND stapersonnelid = personnelID
    <!---AND ltid = stalt--->
    AND CITY = 'richmond'
    AND STATUS <> 'd'
    AND STATUS <> 'T'
    AND type = 'personnel'
    Group by personnelid
    Order by teammember
    </cfquery>
    <cfmail>...
    <cfloop query="staffreport"><br />
    <table width="90%" border="0" cellspacing="2" cellpadding="4" align="left">
      <tr>
        <td colspan="2" align="center" valign="top" nowrap="nowrap" bgcolor="cccccc"><strong><font color="black"><cfif #staffreport.last# eq ".">#Ucase(Staffreport.teammember2)# <cfelse>#Ucase(Staffreport.teammember)#</cfif> - ID: <cfoutput>#Staffreport.noiid#</cfoutput></font></strong></td>
      </tr>
    <tr>
        <td align="left" valign="top" nowrap="nowrap" bgcolor="#000000">Name:</td>
        <td>#Staffreport.teammember#</td>
      </tr>
    <tr>
        <td bgcolor="E6E1FD">Photo:</td>
        <td bgcolor="EBEBEB">
    <img src="#staffreport.hisphoto#" alt="Photo" width="98" height="98">
    </td>
      </tr>
    <tr>
        <td bgcolor="E6E1FD">Email:</td>
        <td bgcolor="EBEBEB">#staffreport.email#</td>
      </tr>
    </table>
    </cfloop>
    </cfmail>

    You'll need to provide a full URL link to the image ("http://mywebserver/file/images_personnel/28.jpg"), not just a relative path.  Remember, the email client that is used to view the email content knows nothing of the internals of your web server - it can only follow a complete URL to get images and other resources.
    -Carl V.

  • How to output a query results into a text file

    How to output a query results into a text file instead of outputing it to the screen..
    is there a way for us to write a SQL query which specifies to output the query results to a text file.
    Pls let me know how to do it
    Thanking u in advance
    regards
    Muraly

    Muraly,
    If you are using SQL*Plus 8.1.6 or later, you can also spool output to a file in HTML format, eg
    SET MARKUP HTML ON SPOOL ON PREFORMAT OFF ENTMAP ON
    SPOOL c:\temp\report.html
    SELECT DEPARTMENT_NAME, CITY
    FROM EMP_DETAILS_VIEW
    WHERE SALARY>12000;
    SPOOL OFF
    SET MARKUP HTML ENTMAP OFF
    In iSQL*Plus 9.0.1 (the browser-based interface to SQL*Plus) onwards, you can also send the HTML output to a new web browser window, or an html file -- much easier than the command line method.
    Alison

  • Converting smartforms output into PDF

    Hi ALL,
      How to convert the smartforms output into PDF based form. After executing the form, it should directly  open in PDF. How to do this?
    Points will be awarded.
    Thanks and regards,
    vinoth.

    Hi Vinoth Kumar,
    Please go throuh the below procedure and sample Code, this might help you.
    Procedure
    When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
    “Environment => Function Module_Name” . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is “ /1BCDWB/SF00000152 ”. In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be ‘X’. Setting this field will activate the OTF field in smartform.
    In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
    In every Smartform output in OTF format, TDPRINTCOM begins and ends with ‘//’. ‘EP’ represents the end-of-page value for TDPRINTCOM field.
    In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
    Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method “cl_gui_fronted_services=>file_save_dialog” to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
    Here is a sample code of program to perform the function.
    SAMPLE CODE
    *& Report  ZAMIT_SMART_FORM_PDF                                        *
    REPORT  ZAMIT_SMART_FORM_PDF                    .
    data: carr_id type sbook-carrid,
          cparam type ssfctrlop,
          outop type ssfcompop,
          fm_name type rs38l_fnam.
    DATA: tab_otf_data TYPE ssfcrescl,
          pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
          tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
          file_size TYPE i,
          bin_filesize TYPE i,
          FILE_NAME type string,
          File_path type string,
          FULL_PATH type string.
    parameter:      p_custid type scustom-id default 1.
    select-options: s_carrid for carr_id     default 'LH' to 'LH'.
    parameter:      p_form   type tdsfname   default 'ZAMIT_SMART_FORM'.
    data: customer    type scustom,
          bookings    type ty_bookings,
          connections type ty_connections.
    start-of-selection.
    suppressing the dialog box for print preview****************************
    outop-tddest = 'LP01'.
    cparam-no_dialog = 'X'.
    cparam-preview = SPACE.
    cparam-getotf = 'X'.
      select single * from scustom into customer where id = p_custid.
      check sy-subrc = 0.
      select * from sbook   into table bookings
               where customid = p_custid
               and   carrid in s_carrid
               order by primary key.
      select * from spfli into table connections
               for all entries in bookings
               where carrid = bookings-carrid
               and   connid = bookings-connid
               order by primary key.
      call function 'SSF_FUNCTION_MODULE_NAME'
           exporting  formname           = p_form
                    variant            = ' '
                    direct_call        = ' '
           importing  fm_name            = fm_name
           exceptions no_form            = 1
                      no_function_module = 2
                      others             = 3.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        exit.
      endif.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards
    calling the generated function module
      call function fm_name
           exporting
                    archive_index        =
                    archive_parameters   =
                     control_parameters   = cparam
                    mail_appl_obj        =
                    mail_recipient       =
                    mail_sender          =
                     output_options       =  outop
                     user_settings        = SPACE
                     bookings             = bookings
                      customer             = customer
                      connections          = connections
          importing
                    document_output_info =
                     job_output_info      = tab_otf_data
                    job_output_options   =
           exceptions formatting_error     = 1
                      internal_error       = 2
                      send_error           = 3
                      user_canceled        = 4
                      others               = 5.
      if sy-subrc <> 0.
      error handling
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      tab_otf_final[] = tab_otf_data-otfdata[].
      CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
       format                      = 'PDF'
       max_linewidth               = 132
      ARCHIVE_INDEX               = ' '
      COPYNUMBER                  = 0
      ASCII_BIDI_VIS2LOG          = ' '
    IMPORTING
       bin_filesize                = bin_filesize
      BIN_FILE                    =
      TABLES
        otf                         = tab_otf_final
        lines                       = pdf_tab
    EXCEPTIONS
       err_max_linewidth           = 1
       err_format                  = 2
       err_conv_not_possible       = 3
       err_bad_otf                 = 4
       OTHERS                      = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
       WINDOW_TITLE         =
       DEFAULT_EXTENSION    =
       DEFAULT_FILE_NAME    =
       FILE_FILTER          =
       INITIAL_DIRECTORY    =
       WITH_ENCODING        =
       PROMPT_ON_OVERWRITE  = 'X'
      CHANGING
        filename             = FILE_NAME
        path                 = FILE_PATH
        fullpath             = FULL_PATH
       USER_ACTION          =
       FILE_ENCODING        =
    EXCEPTIONS
       CNTL_ERROR           = 1
       ERROR_NO_GUI         = 2
       NOT_SUPPORTED_BY_GUI = 3
       others               = 4
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ************downloading the converted PDF data to your local PC*******
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
       bin_filesize                    = bin_filesize
       filename                        = FULL_PATH
       filetype                        = 'BIN'
      APPEND                          = ' '
      WRITE_FIELD_SEPARATOR           = ' '
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
    IMPORTING
       filelength                      = file_size
      TABLES
        data_tab                        = pdf_tab
      FIELDNAMES                      =
    EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
       OTHERS                          = 22
    IF sy-subrc <> 0.
    ENDIF.

  • Need to split the output into files

    Hi,
    I have a query regarding splitting the output into different files. Please help to resolve that.
    I have have select query query...
    SELECT INDEX_NAME FROM DBA_INDEXES WHERE TABLE_NAME=<Table Name>;
    If it returns less than 4 indexes then we have create one table and have to move those into the files.
    For example...
    File_1.sql
    ====
    index1
    index2
    index3
    If select statement returns more than 4 indexes then we have create 4 files and have to splict those indexes and has to move to those 4 files.
    For example....
    If select statement returns 13 records then...
    File_1.sql File_2.sql File_3.sql File_4.sql
    ===== ====== ======= =======
    index1 index4 index7 index10
    index2 index5 index8 index11
    index3 index6 index9 index12
    index13
    Index no need to be in order in any file and any file can I extra index in it.
    Can be ok if we have any procedure or shell script. Please help me on this?
    We are using 10.2.0.1 oracle db. Please let me know if you need any thing else?
    Thanks
    Pathan

    Are you trying to put the output from SQL reports in different files?
    Some reporting tools can do this.
    You have a couple of options to do this.
    Some reporting tools support the functinality to write to different files.
    Another way is to write a PL/SQL procedure using UTL_FILE, which can open multiple files based on your conditions and to write to them as you need to.
    An older, less elegant solution is to write nested SQL*PLUS scripts spooling to different files with the queries you need. A top level script would invoke the others, something like (untested)
    --in first script
    @subscript1
    @subscript2
    --in subscript1.sql
    spool whatever.lst
    select *
       from dual;
    ...

  • Query Output to download in flat file through APD  or other means?

    Hello Experts,
    I am currently on BW3.5 system and have requirement to load query output in flat file in .csv format. I checked the option of APD but looks like we cant directly load the query output in flat file like in APD (BW  3.5 system) .
    One way i can think of it...load  the query output in transactional ODS and built an infospoke on it to write into flat file.
    Please advice if there are any better methods to store the query output in flat files.
    Thanks!

    Hi,
    Use RSCRM_BAPI.
    See
    Re: RSCRM_Bapi
    See the help on RSCRM_BAPI
    Re: Running Quaries automatically and saving them in as a Excel file in Server
    Re: Data transfer to external systems
    Re: Loading from a Custom R/3 Table
    Re: How can I schedule my Bex report to execute in background
    Re: How can I insert the RSCRM_BAPI into Process chain?
    Thanks
    Reddy

  • How to export report output into excel.

    Hi all
    how to export report output into excel sheet can any on give me answer step by step please as soon as possible
    kk

    Hi Prashanth,
    If you are executing Query from WAD  ---> Right click on Table (only on Characteristics Data)  --> Enhanced Menu ---> Export as --> CSV file or MS Excel
    assign points if this helps,
    Thanks,
    Sudhakar

  • Storing query output data in a DSO

    Hi Expert,
    Can you please tell me how to store a query output in a DSO?
    Thanks in advance for your help!
    Ranadip

    Hi,
    You can store the Query output data into DSO through the APD process.
    Analysis Process Designer Uses:
    In SAP BW, data from various databases from systems available in the company are collected, consolidated, managed and prepared for evaluation purposes. There is often further, valuable potential in this data.
    usefull link:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20b22245-0828-2c10-54b1-a2ddb167df01?quicklink=index&overridelayout=true
    Regards.

  • Is there a way to combine their query results into a single function

    say I have a bunch of functions that return a query:
    <cffunction name="getDeals" access="remote"
    returntype="query">
    <cffunction name="getDeals2" access="remote"
    returntype="query">
    is there a way to combine their query results into a single
    function that returns a struct of the various results?

    Umm, it's probably more suited to an array - effectively
    making it into a list of queries. You'd then loop the array and
    output each.
    I use a similar approach when creating system messages to the
    user. Most of my functions that are called do their bit, then at
    the end call another function I call "messages". This function
    grabs whatever my function sends and appends it to a messages
    array.
    This way enables me to output a long list of messages -
    because I could be calling several functions at the same time. If I
    just output a message from each function, each one would overwrite
    the other. So I'd get one message at a time.
    Immediately after it's output, I then destroy the message
    array so that old messages aren't kept inside of it.
    Mikey.

  • Programme required for query output

    Hi,
    We have created a Query in system which will give output of non-printed invoices in system. User select these invoices list and prints it manually.
    Now user has comeup with a requirement that he wanted a programme that selects the query output (non printed invoices) and that automatically adds the output type XXXX.
    Pls let me know does anyone know about such progrmme??
    Thanks in advance
    Srikky

    hi,
    1. sorry we have some limitation in query.
    2. copy the logic into Zprogram and create newly.
    3. add check boxes for each invoice in teh report.
    4. keep select all and deselect all push buttons on the top.
    5. write a SPOOL request inside the program which converts into PDF.
    6. and execute for getting print out.
    or
    an out put is generated automatically when you save an invoice.
    requisites:  a spool program has to be attached to the driver program and execute the spool by selecting it.
    regards,
    balajia

  • Help with formatting multiline output into comma delimited ordered output

    I have 2 tables:
    SQL> desc table_1;
    Name Null? Type
    ===================================
    ID NOT NULL NUMBER
    DATA1 NOT NULL VARCHAR2(440)
    DATA2 NOT NULL VARCHAR2(1024)
    SQL> desc table_2;
    Name Null? Type
    ===================================
    ID NOT NULL NUMBER
    ATTNAME NOT NULL VARCHAR2(255)
    ATTVAL                          VARCHAR2 (4000)
    DATA1 NOT NULL CHAR(1)
    DATA2                          VARCHAR2 (2000)
    DATA3                          VARCHAR2 (255)
    I need to get ATTVAL from where e.g. ATTNAME=att_name1 to ATTNAME=att_name6 from every entry (with its unique ID), and format the output into comma delimited format in e.g. this order:
    att_val1,att_val3,att_val6,att_val4,att_val5,att_val6
    So e.g. for entry with ID "9812" from the query below, the output I need would be:
    187,179,156,134,1436,1809
    What I've got so far is as follows:
    SQL> SELECT id,attname,attval FROM table_2 WHERE id in (SELECT id from table_1 WHERE data2='xxx')
    AND attname in ('att_name1','att_name3','att_name6','att_name4','att_name5','att_name6');
    ID               ATTNAME               ATTVAL
    ===============================
    1970 att_name1 123
    1970 att_name2 abc
    1970 att_name3 1234
    1970 att_name4 def
    1970 att_name5 1134
    1970 att_name6 ghj
    9812 att_name4 134
    9812 att_name5 1436
    9812 att_name3 156
    9812 att_name1 187
    9812 att_name2 179
    9812 att_name6 1809
    77 att_name1 1980
    77 att_name5 1867
    77 att_name3 174
    77 att_name4 1345
    77 att_name2 1345
    77 att_name6 1345
    but I don't know how to format the output comma limited in certain order. (or if this is the best way of getting the data out)
    Would someone have idea how this could be done?

    846954 wrote:
    Thanks Frank!
    I got much further now :).
    I've got Oracle 10g So I used the "SYS_CONNECT_BY_PATH" for my query.
    Now I get the output in the format I want, however, it comes out in the order that the attributes are (which is pretty random).The values you posted are in order: 'attval1' < 'attval2' < ...
    So I'm using this now(had to use "|" as separator because SYS_CONNECT_BY_PATH would not work with comma due to some of the attval having comma in them ):The values you posted don't contain and commas.
    You're hiding what the problem is. It would really help if you posted actual data. It always helps if you post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that data.
    Assuming you really have something that has to be in a certain order, and that order is not based on anything in the values themselves, then DECODE might be a good way to do it. Storing the sort value in a table might be even better.
    It looks like you were using an Oracle 9 exanple. In Oracle 10, using SYS_CONNECT_BY_PATH is simpler:
    SELECT     id
    ,     LTRIM ( SYS_CONNECT_BY_PATH (attval, '|')
               , '|'
               )          AS attvals
    FROM     (
              SELECT     id
              ,     attval
              ,     ROW_NUMBER () OVER ( PARTITION BY  id
                                  ORDER BY          DECODE (...)
                                )     AS curr
              WHERE     id     IN (
                             SELECT  id
                             FROM     table_1
                             WHERE     data2     = 'xxx'
              AND     attname     IN ('attname1','attname2','attname3','attname4','attname5','attname6')
    WHERE     CONNECT_BY_ISLEAF     = 1
    START WITH     curr     = 1
    CONNECT BY     curr     = PRIOR curr + 1
         AND     id     = PRIOR id
    ;You don't need two almost-identical ROW_NUMBERs; one will do just fine.

  • Funcion to display query output

    Hi,
    I want to create a funcion like below.
    I will pass select query to function from my java application and function should return query output. Then I will use output into my application display part, results may be thousands of rows. Will it work ? If works which is the faster between calling a funcion and using "open resultset" method.
    Please tell me how to create funcion like above and how to use funcion returned values in java program.
    Could some one guide me.
    Thanks.

    ITEM CODE...DESCRIPTION....UOM.......PLIST1.......PLIST2
    X..................X.........................X.............PLVAL1.....PLVAL2
    Y.................Y.........................Y..............................PLVAL2

  • Store Query Output or Cache Query

    My search query returns almost about 5000 records or more at
    a time out of 7million records. and I am outputing about 35 records
    at a time on a page. The problem is when the user pages to the next
    page, I hit the DB again and again through the paging process of
    the user.
    The Cache attribute of <cfquery> does not work when you
    are using <cfqueryparam> methods in the Components which we
    are using.
    How can I Store all the outputs of the Query returned into a
    var and cycle through it instead of hitting the DB every time or is
    there another method of caching this returned query output?
    Please give example.

    Thanks, that did the trick, another problem that came out of
    this is Internet Explorer. When Users page to lets say page #6 and
    then use the back button to come back, when it reaches the page
    one,the Query executes again. This only happens with internet
    explorer. I have tried caching the page but still same problem
    persists. I have changed the form method to "get" and it is still
    problematic.

Maybe you are looking for

  • Help neede in changing standard program CN41

    Dear all, I am working on a requirement in PS module. The requirement is I need to copy the standard program RCNST000 of CN41 and I need to add some extra fields. Here in initial display project object, project object. when I select duration and Orde

  • Can we proceed even if no ResultSet Returned In JDBC Sender Adapter ?

    Hi friends ,                        My scenario  is  JDBC to RFC .  I am reading table using JDBC Sender Adapter  and i am passing values to RFC .                       If my select Query has not returned  any row then it won't come to Pipeline right

  • IOS5 podcast tracks in an episode

    I am subscribed to several podcasts that DJs put in tracks from different artists, and i used to be able to see the name of the track and its artist in each segments in each episode of the podcast, After upgrading my iPad to iOS5, I can only see the

  • Standard Workflow - Lead to Opportunity -Issue

    Hi All, i am working on stand alone CRM 5.0. the standard workflow  WS10001011 (Lead to Opportunity) does not have complete workflow definition , it has only the event start, it does not have other steps in the workflow  .is there any sap Notes or ba

  • Export - only tables with data

    Hai Everybody! I have a database in Oracle, which is having hundreds of tables. When i export the database, all the tables will be exported into the .dmp file. i want to export only the tables, which are having atleast one row to the .dmp file. Can a