Query Problem when converting from access to Mysql
I am trying to get a small application to work with a mysql
db. The original
db is access, for some reason I am getting an error now that
the db has been
converted over to mysql. Any gurus out there spot the
problem. Here is the
query:
<cfquery name="getprevmonth"
username="#request.myDBUserName#"
password="#request.myDBPassword#"
datasource="#request.myDSN#">
SELECT cal_date,(day(cal_date)) AS theprevmonth
FROM jot_eventcal
WHERE (cal_date >=
#CreateDate(Year(prev_date),Month(prev_date),1)#) and
(cal_date <=
#CreateDate(Year(prev_date),Month(prev_date),DaysInMonth(prev_date))#)
</cfquery>
This query works fine when I test the application Locally, it
only messes up
when I test online. The error code is:
Syntax error or access violation: You have an error in your
SQL syntax.
Thanks for any assistance in advance...........and a happy
new year to you
all.
I don't know the answer but, it might be that using
createdate is not sufficient. Try wrapping that date into either a
cfqueryparam or createodbcdate.
Something else to bear in mind when switching db's is that
they don't all have the same functions. I don't use mySql so I
don't actually know, but I'd be checking the manual to make sure it
has a day function.
Not a syntax, but a potential logic error is that you are
using a function called day to create an alias called theprevmonth.
At the very least, it's misleading and might confuse you later
on.
Similar Messages
-
Encountered problem when converting from development to runtime environment
1. I ran apxdevrm.sql switch my environment to runtime. Although it seemed to finish successfully, this error was in the log and according to registry, my installation was invalidated(still works though).
drop package wwv_flow_create_flow_api (doesn't seem to exist)
ERROR at line 1:
ORA-04043: object WWV_FLOW_CREATE_FLOW_API does not exist
Entry in dba_registry:
COMP_NAME--Oracle Application ExpressSTATUS
STATUS--INVALID
2. Next, not sure if it had made the switch, I then ran apxdvins,sql to revert back because of problem #1. (later found out that it was still devl environment)
This time, this message appeared in log...
FAILED CHECK FOR TRIGGER BIN$UH58A027El3gRAADutXi8w==$0
(Installation still invalid)
Any ideas?1. Commented "drop package" stmt out on apexdevrm.sql to get rid of non-existent package problem. (probably holdover from v3.0)
2. purged dba_recyclebin to get rid of problem #2.
Dba_registry entry still shows as INVALID... Has anyone else encountered these problems when switching from dev to runtime? (or vice-versa) -
Problems when converting from pdf to word
I am a translator and I get most of my work in pdf files. So I convert the pdfs into words to be able to change the text and edit. However, when dcuments are converted from pdf to word I have found they become very unstable and difficult to work with to the point I usually end up not using the coverted file. Is there any place I can go for training about what to do with those documents? Can anyone relate to this problem?
thanksHi patryba,
You can access ExportPDF here: Adobe Acrobat.com.
Please let us know how it goes!
Best,
Sara -
Problem when converting from spool to XLS file
Hey.
I need to get table data from the spool and send it by mail in an xls file.
so this is what i have done:
I have used the FM 'RSPO_RETURN_ABAP_SPOOLJOB' to get the data table from the spool.
then i am sending the data table in an xls file via the FM 'SO_DOCUMENT_SEND_API1'.
the problem is that the xls file that i am getting through the mail is defected.
All the contents of the spool is located in the first row, first column.
How can i fix it?
Thanks, Barak.After geting the data in a internal table.from spool......refer this report.....
data: p_email type somlreci1-receiver
value 'MAIL ID'.
data: begin of it001 occurs 0,
bukrs type t001-bukrs,
butxt type t001-butxt,
end of it001.
data: imessage type standard table of solisti1 with header line,
iattach type standard table of solisti1 with header line,
ipacking_list like sopcklsti1 occurs 0 with header line,
ireceivers like somlreci1 occurs 0 with header line,
iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
Populate table with detaisl to be entered into .xls file
perform build_xls_data .
Populate message body text
clear imessage. refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
iattach
using p_email
'Example Excel Attachment'
'XLS'
'TestFileName'
'CompanyCodes'.
Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
con_tab type x value '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>horizontal_tab,
con_cret type c value cl_abap_char_utilities=>cr_lf.
concatenate 'BUKRS' 'BUTXT'
into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001 .
concatenate it001-bukrs it001-butxt
into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
endloop .
endform.
Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription.
data: xdocdata like sodocchgi1,
xcnt type i.
Fill the document data.
xdocdata-doc_size = 1.
Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu .
xdocdata-obj_name = 'SAPRPT' .
xdocdata-obj_descr = p_mtitle .
Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name = p_filename.
ipacking_list-doc_size = ipacking_list-body_num * 255.
append ipacking_list.
Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
exporting
document_data = xdocdata
put_in_outbox = 'X'
commit_work = 'X'
tables
packing_list = ipacking_list
contents_bin = iattachment
contents_txt = imessage
receivers = ireceivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
endform.
Reward IF.........
Regards
Anbu -
Hello All,
we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
I have checked IP,DNS,Gateway and more each & everything is well.
Pls suggest us.
Pankaj KumarHi,
According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
Please try to enable the option below on the device which has shared folder:
Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Overflow when converting from "3.60001e+11"
Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Occurred on 03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM -
Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student -
Upload maxdb really needed? - Overflow when converting from 32768
hello,
I am facing with a run time error that does not make sense when uploading maxdb database. The error is: "Overflow when converting from 32768".
I am following this configuration tutorial:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Anyway, is there a need to upload this database? We installed netweaver mobile with SQL server database.
Help please.
Thanks.
Edited by: João Carneiro on Feb 8, 2011 2:10 PMHi,
Uploading MAXDB is not mandatory. It is needed only when multiple devices need to be installed with MAXDB through setup or software packages, which helps administrator to roll out multiple devices, so that end users will get all the necessary software to install the device.
Hope this clarifies your query.
Thanks and Regards,
Suma -
Windows 8.1 account limit problem when downloading from store
windows 8.1 account limit problem when downloading from store
I have 250 windows 8.1 tablets.
I figured since you can use the same account on 81 devices id create 4 accounts.
I need to download more than 25 free apps from the store
on each tablet. Putting the same account don't work. (comes up with an error after putting on to many devices that you cant use this account now).
Whats the best way to do this ? and what if I need to download a paid app ?
Thank You.Hi,
As far as I know, One Microsoft Account may bound at most five Trusted computers. There is no way to break this limitation.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hyperlink problem when converting Word to PDF
Hi everyone.
I am using Adobe Acrobat 7.0 Standard version 7.1.4 on a Windows 2000 environment.
I am using Word XP/2002 SP3.
I have a couple of problems when converting Word to PDF.
When converting a long link which is in 2 lines, PDF just takes one line into account, not considering the whole link
When I have hyperlinks that links to a web page, the link works fine in Word but in pdf, it gets the few words after the url address making the link not work. For example. I have a hyperlink that http://www.google.com/ and after this I have the words: "This is a sample text". The hyperlink in pdf would then become http://www.google.comThisisasampletext
Do you have any ideas how I can correct this?
Thanks.To get the cross references, you have to use Convert to PDF (PDF Maker part of the Acrobat product). However, you first need to go to the print menu and set the printer to the Adobe PDF printer. Close the print menu and then do a reflow and link update of the document (ctrl-A, then F9 I think). This is needed to get the links correct since WORD reflows the document based on the printer (problem with them going to the wrong place).
Printing to the Adobe PDF printer (the step of print to file is not needed, just print to the printer and the rest is automatic) does not include the links. PDF Maker is a PreProcessor for the Adobe PDF printer that adds PDF Marks to the PS file before it is sent to Distiller (OK, the printer when used normally creates a PS file and then invokes Distiller to complete the process - your steps did with the Adobe PDF printer is the same process done manually).
Summary:
1. Fix document after setting the printer to Adobe PDF.
2. Use PDF Maker (create PDF button) -
How do I maintain column formatting when converting from PDF to Excel?
How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.
Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription. -
Problems when waking from long sleep periods
Suddenly this morning my iMac developed a problem when recovering from a long period of sleep. I'm having trouble finding a solution.
I have my iMac set to ask for password when it recovers from sleep or screen saver. When I woke my iMac this morning the password dialog box appeared at the top of the screen as a garbled mess. If I put my iMac back to sleep and then wake it again it usually solves the problem.
I don't want to turn password verification off. Has anyone seen this problem before? Any suggestions on what might be cause?funkyblue:
I usually leave my Pismo on and allow it to sleep. I find that waking from sleep and general functioning of the computer works a lot better if from time to time (I do it at least weekly) I shut down the computer, start up in Safe Mode, log in, empty Trash and reboot normally. The emptying Trash part clears the font caches.
You should consider doing other maintenance procedures, if you don't already. Gulliver's Mac OS X System Maintenance has good ideas with linked resources.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius -
When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe. -
Default PR Type when convert from Planned Order
Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
AndrewHi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM -
Moving Scriptlet Code to backing bean when converting from JSP - Facelets
Hello!
We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
I do appreciate the response!
Eg of a jsp page:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
<%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
<%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
<%@ page import="com.kkee.util.*"%>
<%
AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
if (advancedSearchFormManagedBean == null) {
advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
advancedSearchFormManagedBean.setQuickSearch();
request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
%>
<h:form id="MYCenterForm">
<p:portletRenderer portletSetName="test of portlet"
portletContainer="#{PortletContainerManagedBean}"
id="MYCenter"
portletScope = "TEST_SCOPE"
suppressIfNoData="true"
portletSkinName="SOME_SKIN">
<f:facet name="persistenceToolkit">
<h:commandLink id="persistenceToolkitLink"
actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
<h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
</h:commandLink>
</f:facet>
</p:pagePortletSetRenderer>
</h:form>
<%
String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
if("1".equals(flag)){
ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
if(rt!=null){
rt.setDesc("my cle loaded");
long now = System.currentTimeMillis();
long start = rt.getStart() + rt.getTotal();
rt.setInterval(now-start);
rt.setTotal(rt.getTotal()+rt.getInterval());
LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
session.setAttribute("responseTime", rt);
%>That helps.
This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
<h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
<l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
</h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
javax.servlet.ServletException: Index: 0, Size: 0
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
... 22 more
********** Message End *************Thanks
Maybe you are looking for
-
Re: Shared Channel Strip settings, Plug-in settings...
Hi all, Has anyone gotten into shared Channel Strip settings and Plug-in settings? I read that there are multiple ways of doing this (bonjour). Just wondering if there are any good places on the net that anyone knows of. I know it's always best to ma
-
Hi, I want to generate xml output of a query. ( suppose if i write select * from tab1 ; then i want all the rows from the table tab1 in xml form ) how to do it.. ? plz guide.
-
Hello Experts, I have done LSMW for SAP Master data but never for transactional data. Can someone tell me how the LSMW for master and transactional data upload differs? I am working on "Accounts Receivable Open Items". I would appreciate your help an
-
Hi, i've read the thread about the 0 byte libs but on my system sqlplus complains about the libobk.so which is a symbolic link to libdsbtsh8.so!!! Is there a patch for this lib ?? What did I wrong ? Thank you very much Michael null
-
Error in the helloworls page startup in oaf
500 Internal Server Error oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating new Poolable object. at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1509) at oracle.apps.fnd.profi