Query regarding CPU patches
Hi,
As per my understanding CPU patches are released every quarter for each version & realease of oracle database.
I am using Oracle 10.2.0.3 on IBM-AIX 5.3 (64 bit).
I checked on below link of metalink.
Patches & Updates -> Oracle Server/Tools -> Latest Patchsets -> Latest Oracle Server/Tools Patchsets -> Then selected oracle database and OS version -> Patch Type selected as Any -> Classification selected as High/Security -> Go
But the above gives me no CPU patch list!!!!
So is it no mandatory that each & every quarted we will get a new CPU patch from oracle? Or am I doing any mistake in selection above?
Thanks in advance.
Best Regards,
oratest
Hi Srini,
Thanks for your reply.
As per the link doc, the primary support for 10.2 has been ended on July-2010, and the extended support will end on July-2013.
And as you mentioned that CPU patches are released in extended support as well, so as of now I must see CPU patch in metalink for my database release (10.2.0.3). But I can not see any CPU patch for my version, release??
One more thing: As per my understanding CPU patches comes under High/Security patch classification, am I right?
Best Regards,
oratest
Similar Messages
-
Query regarding database patching
Hi ,
I am on Oracle 11G and Solaris SPARC 64-bit server.
The server admin have applied the oracle CPU that was released on April 18,2011.
I have the path to the new oracle home now.
Currently my oracle home is 11.1.0.7.P1 and the new oracle home is
11.1.0.7.P2.
Now the practice that i have been following to change my oracle home(Patching) is :
1. Shutdown db
2. Change oratab with new home:Y
3. Change my .profile for $ORACLE_HOME
4. Startup the database with init.ora
5. Run catbundle.sql cpu apply
6. Run recompile_precheck_jan2008cpu.apply
7. View_recompile_jan2008cpu.sql
8. Shutdown immediate and startup
9. Change oracle home in listener.ora
10.Create softlink of init.ora to /dbs/ of new oracle home.
Now I have 2 queries :
1.Since the database runs fine post it , I am not able to conclude
if any other sql also needs to be run ?
2. What is the location of the readme.txt and readme.html which i need to check for invalid objects.
I have searched but couldn find it. :(
Also , How do i test the performance pre and post patching..
Will doing it by just checking the time taken for Data loads pre and post
patching sufficient.
What other checks can i do in dev to test for patch.
Thanks and Regards
KkHi ,
In this particular database , ive run the catbundle.sql and its been almost 30 mins that its at this location :
SQL> @?/rdbms/admin/initcdc.sql
SQL> Rem
SQL> Rem $Header: initcdc.sql 15-mar-2006.08:20:07 mbrey Exp $
SQL> Rem
SQL> Rem initcdc.sql
SQL> Rem
SQL> Rem Copyright (c) 2000, 2006, Oracle. All rights reserved.
SQL> Rem
SQL> Rem NAME
SQL> Rem initcdc.sql - script used to load CDC jar files into the database
SQL> Rem
SQL> Rem DESCRIPTION
SQL> Rem <short description of component this file declares/defines>
SQL> Rem
SQL> Rem NOTES
SQL> Rem script must be run as SYS
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem mbrey 03/15/06 - bug 5092790 add datapump registration
SQL> Rem pabingha 02/25/03 - fix undoc interfaces
SQL> Rem wnorcott 03/14/02 - bug-2239726 disable triggers.
SQL> Rem wnorcott 01/31/02 - function 'active' return 0 or 1.
SQL> Rem wnorcott 01/30/02 - disable CDC triggers, CREATE_CHANGE_TABLE re-enables.
SQL> Rem wnorcott 06/26/01 - rid trailing slash. As per Mark Jungermann
SQL> Rem gviswana 05/25/01 - CREATE OR REPLACE SYNONYM
SQL> Rem jgalanes 11/17/00 - for Import/Export grant execute on util to
SQL> REM SELECT_CATLOG_ROLE
SQL> Rem wnorcott 09/07/00 - new loadjava syntax for performance.
SQL> Rem wnorcott 07/18/00 - rid LOGMNR_UID$.clientid
SQL> Rem wnorcott 06/28/00 - move logmnr_dict view here
SQL> Rem wnorcott 03/28/00 - fix trigger install
SQL> Rem wnorcott 03/27/00 - Install change table triggers
SQL> Rem mbrey 01/26/00 - script to load CDC jars
SQL> Rem mbrey 01/26/00 - Created
SQL> Rem
SQL> call sys.dbms_java.loadjava('-v -f -r -s -g public rdbms/jlib/CDC.jar');How do i check if its still running or failed ?
*PS : Ive read this note :Script Fails At Loadjava With ORA-03113 and ORA-03114 [ID 358232.1] But its when it errors out , for me its not erroring out also..*
Thanks
Kk
Edited by: Kk on May 25, 2011 2:40 AM -
Oct 2011 cpu patch for database on solaris
Hi All,
I have query regarding oct 2011 cpu patch
OS:SOLARIS 5.10,sun4u sparc SUNW, Netra-T12 release update 10
RDBMS:10G 64bit
am looking for latest cpu patch can any one provide the patch number
thanks in advanceModerator Action:
Already asked in the Database forum:
oct 2011 cpu patch for database on solaris
... and already answered in that same database forum thread.
Locking.
Edit:
In the context of this thread, "cpu" refers to Critical Patch Update (CPU)
such as this , which was found in about 20 seconds using the search function on the Oracle home page.
Edited by: rukbat on Jan 3, 2012 2:01 PM -
Hello :
I have successfully upgraded the system to latest patchsets. The database is already on 11g. The only thing which is pending now is the CPU Patches.
I know that the Database and the Application tier CPU patch is cumulative where as the EBS suite patch is not cumulative.
For me to apply the EBS suite CPU's I need to know the current CPU patch applied to it. If I know this then I can probably list all the CPU patches that needs to be applied to the system.Is there any way or query that I can use to get this information.
Please advice any good reference material to carry out this patching. I want to merge all the EBS patches together and then apply it in one shot.
Regards,
BalaI just blasted our instances with ATG.H RUP 6 plus all CPU patches. Here is the list I merged together:
11i: (These are not cumulative as described in the text below the patches)
Jul 05 CPU:
4349098 NEED STANDALONE PATCH FOR DISALLOWING GUEST USER POSTING DATA TO INBOUND OTA
4132004 2005-S054I
4355663 11i Email Center JSP Fixes
4381232 11.5.10: SQLEDITOR FIX FOR JULY 05 CPU - CCTRSDYNGRPDET.JSP
Oct 05 CPU:
3904641 CPU Oct 05 : 2004-S291E
4522020 CPU_Oct_05 : 4350242 for 11.5.10
4537307 CPU_Oct_05 : 4537307
4566995 CPU Oct 2005 4163256
4583865 CPU_Oct_05 : 4163199 for 11.5.10
4613714 EBUSINESS SUITE 11i APPLICATIONS PATCH FOR OCTOBER CPU 05
3832113 SSHR CLIENT VALIDATION UPDATE - 5.1
4582839 BACKPORT REQUEST FOR BUG 4550424 at FP.I TO FP.J
Jan 06 CPU:
4489303 TXK (FND) AUTOCONFIG TEMPLATE ROLLUP PATCH L (NOV 2005)
3417698 CPUJan06: 3417698 For BNE.D
4756429 CPUJan06 4756429 11.5.10 to 11.5.2
4759690 TECHNOLOGY STACK COMPONENTS FOR JAN06 CPU
4865928 CPUJan06 : MAS_PF 4865928 For 11.5.10 CU2
4928090 CPU Jan 06 : 4928090 for EBS 11.5.10.CU2
Apr 06 CPU:
4150288 CPUApr2006<4150288> <11.5.4>
4332440 CPUApr06 4332440 11.5.10 & 11.5.10 CU2
4969592 CPUApr06 4969592 11.5.1 to 11.5.10CU2
5046719 CPUApr2006: 5046719 :TECHNOLOGY STACK COMPONENTS FOR CRITICAL PATCH UPDATE APR 2006
Jul 06 CPU:
5083302 CPUJul06: 4967960 for 11.5.10 - 11.5.10.RUP3
5088058 CPUJul06: 5088058 for 11.5.10 - 11.5.10RUP3
4380242 CPUJul06: 4380242 for 11.5.7 - 11.5.10RUP3
5127737 CPUJul2006: 5127737 for 1159 -11510 (including CU1, CU2)
5161758 CPUJul06: 5161758 for 11.5.10 - 11.5.10.RUP3
5183582 CPUjul2006: 5183582 :TECHNOLOGY STACK COMPONENTS FOR CRITICAL PATCH UPDATE JUL 2006
4341684 11I.OIE.J (11i.FIN_PF.G) Rollup #2
Oct 06 CPU:
4510092 BR11510 : ONE-OFF FOR UPTAKE OF TESTUSERNAME AND ISCREATEUPDATEUSERALLOWED
5335967 CPUOct06 : Patch 5335967 : 11.5.102CU
5389416 FND_LDAP_USER.UPDATE_USER FAILS WHEN THERE ARE NO CHANGES TO SYNC TO OID
5447522 CPUoct2006: 5447522 :TECHSTACK COMPONENTS FOR CRITICAL PATCH UPDATE OCT 2006
5479643 CPUOct06: 3736589 for 11.5.7 - 11.5.10.RUP4
5486407 CPUOct06: 4724985 for 11.5.10 - 11.5.10.RUP3
5500118 CPUOct2006:3748822 for 11.5.7 to 11.5.10.RUP4
5526897 CPUOct06 5526897 HZ.N
Jan 07 CPU:
5571208 CPUJan07: 4430164 FOR 11.5.10 to 11.5.10.4RUP
5711361 ENTERED FOR THE FOLLOWING FIELDS EXCEED THE MAXIMUM PRECISION ALLOWABLE
5658489 CPUJAN2007:TECHNOLOGY STACK COMPONENTS FOR CRITICAL PATCH UPDATE JAN 2007
3748835 CPUJan07 3748835 For 11.5.9, 11.5.10, 11.5.10 CU1 and 11.5.10 CU2
5661617 CPUJan2007 5661617 HZ.N
5711485 CPUJan07<5711485> <11.5.10.2/AP.N>
5394384 1OFF:11.5.10MRII:5198411:EMPTY ERROR MSG INAP INV WORKBENCH UPDATING PROJ INFO
5234512 STANDALONE ARU FOR 11.5.10 PO-OTM INTEGRATION PACKAGING
Apr 07 CPU:
5893391 CPUApr07 5893391 for 11.5.7 to 11i.ATG_PF.H RUP4
5900224 CPUApr2007 5326373 for 11i.ATG_PF.H RUP3 - RUP4
5352601 CPUApr2007 5352601 11i
5720979 CPUApr2007 5720979 - IBE 4249089 ORACLE ISTORE 11.5.10 ROLLUP 3
5738134 CPUApr2007:5738134 : BR11510 : 11.5.10 - 11.5.10.CU2
5909233 CPUApr2007:5909233 11.5.10.CU2,11.5.10.CU1,11.5.10
5873313 CPUApr2007:5873313 : 11.5.8 - 11i.ATG_PF.H RUP4
5904576 CPUApr2007:5893412 FOR 11.5.10.CU2 to 11i.ATG_PF.H RUP4
5967405 CPUAPR2007:5967405 11.5.10 - 11.5.10.CU2
5938358 CPUApr2007:5680579 for 11i.ATG_PF.H RUP4
Jul 07 CPU:
5973659 CPUJul2007 : 5973659 : 11.5.8 - 11i.ATG_PF.H RUP5
6045931 CPUJul2007 : 6045931 : 11.5.8 - 11i.ATG_PF.H RUP5
6045983 CPUJul2007 : 6045983 : 11.5.10 - 11i.ATG_PF.H RUP5
5973898 CPUJul2007 : 5973659 : 11.5.8 - 11i.ATG_PF.H RUP5
5973629 CPUJul2007: 5973629: 11.5.7 - 11.5.10.2
6185758 CPUJUL07 : 6185758: 11.5.10.2/CU2/11i.AP.O
6082483 CPUJul07 4609978 For IRC.D --Need to find out if needed on IRC.E
6110945 CPUJul2007: 6110945: 11.5.10 & above
6111066 CPUJul2007: 6111066: 11.5.10.2
6111008 CPUJul07: 6111008: 11.5.9 & above
6188705 CPUJul2007 : 6188705 : 11.5.10.2 (11i.FV.K)
5973651 CPUJul2007 : 5973651: 11.5.10 - 11.5.10CU2
6117954 11i.OIE.I : CPUJul2007 : 5973659 11.5.10
Oct 2007 CPU:
4897479 CPUOct2007 : 4897479 : 11.5.8 - 11i.ATG_PF.H RUP5
4514856 CPUOct2007 : 4514856 : 11.5.8 - 11i.ATG_PF.H RUP5
6181762 CPUOCT2007 <6181762><11i.AMS.I>
Jan 2008 CPU:
6643087 CPUJan2008 : 6643087 : 11.5.9 - 11i.ATG_PF.H RUP6
6142917 CPUJan2008 : 6142917 : 11.5.9 - 11i.ATG_PF.H RUP6
6530949 CPUJan2008 : 6530949 : 11i.ATG_PF.H RUP5 - RUP6
6640163 CPUJan2008 : 6640163 : 11i.ATG_PF.H RUP4 - RUP6
Apr 08 CPU:
6831988 CPUApr2008 6831988 EBS11i:Technology Stack (TXK) Components For Critical Patch Update April 2008
6858005 CPUApr2008: 6858005 : 11.5.10 - 11i.ATG_PF.H RUP6
6858550 CPUApr2008: 6858550 : 11.5.9 - 11i.ATG_PF.H RUP6
6802774 CPUApr2008: 6802774 : 11i.ATG_PF.H RUP5 - RUP6
6810748 CPUApr2008<6810748><11i>
ATG.H RUP 6 patches:
3218526 Patch 11i.BNE.D
3761838 Patch 11i.FRM.G
4206794 Patch 11i.FRM.H
4291053 LANGUAGE FILE SETUP FOR BNE.D(3218526)
4346113 BR11510:JAVA.LANG.ARRAYINDEXOUTOFBOUNDSEXCEPTION WHILE CREATING QUOTATION
4583125 REHOSTING ORACLE XML PARSER FOR JAVA 9.0.4+ WITH FIX FOR BUG 4521742
5502871 afscssodmz.sql fails when SSOSDK schema absent while applying 4775907
5622511 J2SE 6.0 CONSOLIDATED PATCH FOR USE WITH ORACLE EBS 11.5.10
5903765 11i.ATG_PF.H.RUP6
5989593 AD: 11i: Remove "REVOKE ALL FROM PUBLIC" from ADGRANTS.SQL
5971958 ORACLE CONFIGURATOR PATCH BLD-25-41 (CUMULATIVE)
5977502 EXCEPTION IS RAISED WHEN BUTTON IS PRESSED
6024690 BR11510: ATG11510RUP5: ERROR THROWN WHEN CLICKED ON THE QUOTES TAB
6047864 REHOST JOC FIXES (BASED ON JOC 10.1.2.2) FOR APPS 11i
6117031 11i.ATG_PF.H RUP6 SSO 10g Integration
6153778 11i.OIE.J: UNABLE TO ACTIVATE A USER RESPONSIBILITY ASSIGNMENT
6330890 ORACLE APPLICATIONS TECHNOLOGY HELP FOR 11I.ATG_PF.H RUP6
6863618 APPLICATIONS 11i INTEROPERABILITY PATCH FOR THE JRE NATIVE PLUGIN -
Hi Hussein:
I am planning to apply the CPU patches for my EBS instance. I know that the application server and the Database server patchsets are cumulative. So I can apply the latest CPU.But the EBS patchsets are not cumulative. In order to get the list of all the patches that needs to be applied since April 2006,I need to query AD_APPLIED_PATCHES with the EBS patch numbers since April 2006 right? Is this the right approach.
Regards,
BalaBala,
If your instance release is 11i then you are correct. You need to query AD_APPLIED_PATCHES (I would prefer querying AD_BUGS table) to get the list of applied patches.
In R12, CPU patches are cumulative.
Note: 787703.1 - Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (April 2009)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=787703.1
Note: 315713.1 - Prior E-Business Suite Security Alerts
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=315713.1
Regards,
Hussein -
Opatch error while applying CPU patch
HI Sir ,
when i Applying CPU patch (7592354) on oracle home version 10.2.0.3 by using opatch napply -skip_subset -skip_duplicate
The below error occurred .
OUI-67124:Conflict with patches in OracleHome detected. Please run OPatch again as
<ORACLE_HOME>/OPatch/opatch napply /tdb1/sadvora/7592354 -id 6397928,6397929,6397937,6397938,6397939,6397942,6397945,6397947,6452863,6650081,6650096,6650105,6667542,6868171,6868172,6868173,6868174,6868175,6868176,6868177,6868178,7154831,7154832,7154833,7154834,7154835,7154837,7154838,7154839,7154840,7154841,7154842,7154843,7369192,7369193,7369194,7369195,7369196,7592354,7604445,7604446,7604447 -skip_duplicateHi;
Please see:
WARNING OUI-67301: "Following patches have conflicts. Please contact Oracle Support " [ID 802459.1]
Critical Patch Update 2011Conflicts with patches in OracleHome: OUI-67124:Conflict with patches in OracleHome detected [ID 1315387.1]
Critical Patch Update October 2010 Oracle Fusion Middleware Known Issues [ID 1159431.1]
Regard
Helios -
CPU patch July 2010 on Oracle 11.1.0.7 database
Hi,
I want to install the July2010 CPU patch (9655014) on a 11.1.0.7 database which was initially created with version 11.1.0.6.
The README file of the patch states the following about recompiling views:
3.2.2.2 Recompiling Views in the Database
You may skip this section if you have recompiled views for this database during the installation of a previous CPU or if the database was created with Release 11.1.0.6 or later.
So I assumed that I do not need to recompile the views but a little further in the README file I read:
If you want to check whether view recompilation has already been performed for the database, execute the following statement.
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
When I execute the select it returns no rows. So this is confusing. Should I perform a view recompilation or not?
And when I execute recompile_precheck_jan2008cpu.sql (strange name for a July 2010 CPU) it says:
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1969
Number of objects to be recompiled :4019
Please follow the README.txt instructions for running viewrecomp.sql
PL/SQL procedure successfully completed.
thanks in advance.
regards,
IvanShort answer: you dont need to run view_recompile_jan2008cpu.sql
Long answer:
>
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
When I execute the select it returns no rows. So this is confusing. Should I perform a view recompilation or not?
>
You will only get an entry in registry$history if you had a database that you had actually run the view_recompile_jan2008cpu.sql script which inserts a row into the table at the end of the script:
view_recompile_jan2008cpu.sql
Rem =======================================================================
Rem Insert values for patch into registry.
Rem =======================================================================
INSERT INTO registry$history (action_time, action, id, comments)
values ( SYSTIMESTAMP, 'CPU', &&PATCH_NUMBER, '&&PATCH_DESC' );
COMMIT; In your case, you will get no entries in the table BUT you do not have to run the view recompilation so long as the database was created using a patched Oracle home of a release where Oracle says the view recompilation is not required.
>
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1969
>
This script has a very simple logic that just generates count of views and dependant objects that would need recompilation. The selection criteria does not include actually checking whether you actually need to apply the view recompilation script.
You can test this yourself:
Case#1: Run the recompile_precheck_jan2008cpu.sql on a database where you have applied the view recompilation script. You will find the count shows a non-zero value.
SQL> col action_time format a32
SQL> col version format a15
SQL> col version format a15
SQL> select action_time, version, id from registry$history where ID=6452863;
ACTION_TIME VERSION ID
24-JUL-10 12.52.15.390000 PM 6452863
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1637
Number of objects to be recompiled :3487
Please follow the README.txt instructions for running viewrecomp.sql
PL/SQL procedure successfully completed.Case#2: Create a new database using a version that does not require the view recompilation patch. Run the recompile_precheck_jan2008cpu.sql. You will find the view count shows a non-zero value even though you do not need to recompile the views as mentioned in the Oracle patch notes. -
We are in DOD -GOVT US marine corps.. WE are on 10.1.3.3.1 .. There is no CPU Patches for 10.1.3.3.1 nor
for 10.1.2.03-B2B
open issues/questions:
Open Issues:
1. What is Oracle's recommendation about upgrading 10.1.3.5 vs 10.1.3.4 (CPU Patch support length). Also CPU Patch support policy for BAM 10.1.3.3.1 and B2B 10.1.2.3.
2. Any MLRs to apply after upgrading SOA/BPEL/WSM/BAM/B2B 10.1.3.5 ?
3. Interoperability of OWSM 10.1.3.4, BAM 10.1.3.3.1, B2B 10.1.2.3 and SOA/BPEL 10.1.3.5. Can they co-exist or must they(one or more) be in same release level?
Thanks & Regards
SriHi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
FTPing .zip CPU patch files...
Hi
I have downloaded a .zip file for Oracle CPU Patch and wants to move it to UINX server. After connecting the UNIX server, beofre I say "put <filename>"...do I have to say "binary"?
Your answer will be highly appreciated.
Thanks & Regards
Ahmed.Hello,
Besides the previous answer, generally (if you click on the patch detail) you have the size of the zip file in bytes.
For instance:
Size 1.1G (1123325074 bytes) So, once you have sent the zip file on the Unix server, you can check if it's size is correct.
Hope this help.
Best regards,
Jean-Valentin -
Database rolling upgrade cpu patch with minimal service outage
Oracle 11gR2 Primary Instance
Oracle 11gR2 Active Physical Standby
Requirement of applying CPU and CVE patches with minimal downtime. I believe that I've been able to apply CPU patch to Active Standby after deferring redo transport and applying patch to active physical standby first and then performing a manual switchover to have the standby become the primary and former-primary become the standby and they apply CPU Patch there and then perform another role transition to its original role.
Appreciate your experience with primary and active physical standby rolling upgrades/patches. ThanksHello;
I believe you are over thinking this. All you have to do on the Standby is install the patch. No switchover, no SQL. No nothing.
The SQL will move from the Primary to the Standby.
Check the readme for the patch closely or post the patch number if you want to confirm.
OR
How do you apply a Patchset,PSU or CPU in a Data Guard Physical Standby configuration [ID 278641.1]
( If it helps I had the same thoughts after my first Data Guard setup !! )
If you are trying to avoid downtime entirely the switchover will take about as long as the patch.
If you have RAC this is interesting :
http://javeedkaleem.blogspot.com/2010/05/how-to-apply-oracle-database-patch.html
As is this :
http://docs.oracle.com/cd/B28359_01/server.111/b28282/schedule_outage.htm
Best Regards
mseberg -
Applying 10.2.0.5 Cpu Patch
Hello All,
I am a newbie here.
We are applying the CPU patch to our 10.2.0.5 Database. I have some general questions.
The database is in archive mode and jobs are scheduled in crontab.
As we have to down the database to apply the patch, should i stop taking the backup and also should i keep the database in no archive mode?
Thanks.Thank you very much.
Also, Is there any query to check the backup location?
I checked in RMAN. It doesnt say any specific location.
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 100 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO 'TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE TAPE TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE TAPE PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/product/EMBCORP/dbs/snapcf_EMBCORP.f'; # default
Thanks. -
Sapstart fails after installation of CPU-Patch April2009 on Oracle 10.2.0.4
Hi Experts,
after installing the CPU-Patch April2009 for Oracle 10.2.0.4, startsap fails with error code 12.
Starting everything manually works (lsnrctl start, sqlplus and do startup, after that startsap works).
When the listener and the database are running, things like R3trans -x also work without errors.
I found a SAP-Note 97953 but I don't know if this is the solution. Some of the oracle-executables in the bin-directory have been modified. So there is a "oracle" and a "oracle0" . The timestamp indicates to me that these files were modified while implementing the CPU-Patch.
I also checked SAP-Note 583861but with no success.
regards
DirkHi Markus,
if the database ist down and I execute "R3trans -d" I'll get the following error.
R3trans -d
This is R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'QXI'"
R3trans finished (0012).
and trans.log looks like:
more trans.log
4 ETW000 R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 19.06.2009 - 09:36:55
4 ETW000 control file:
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 Fri Jun 19 09:36:55 2009 123 0.000123
4 ETW000 db_con_init called 17 0.000140
4 ETW000 determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 66 0.000206
4 ETW000 create_con (con_name=R/3) 21 0.000227
4 ETW000 Loading DB library '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' ...
4 ETW000 65 0.000292
4 ETW000 load shared library (/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so), hdl 0
4 ETW000 10039 0.010331
4 ETW000 Library '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' loaded
4 ETW000 26 0.010357
4 ETW000 function DbSlExpFuns loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so
4 ETW000 35 0.010392
4 ETW000 Version of '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' is "710.16", patchlevel (0.6
0)
4 ETW000 75 0.010467
4 ETW000 function dsql_db_init loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so
4 ETW000 26 0.010493
4 ETW000 function dbdd_exp_funs loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.s
o
4 ETW000 66 0.010559
4 ETW000 New connection 0 created 31 0.010590
4 ETW000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, tx = NO , bc = NO , hc = NO , p
erm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.010629
4 ETW000 db_con_connect (con_name=R/3) 30 0.010659
4 ETW000 determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.010683
4 ETW000 find_con_by_name found the following connection:
4 ETW000 25 0.010708
4 ETW000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, tx = NO , bc = NO , hc = NO , pe
rm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.010740
4 ETW000 Oracle Client Version: '10.2.0.2.0' 503 0.011243
4 ETW000 -->oci_initialize (con_hdl=0) 30 0.011273
4 ETW000 Environment NLS_LANG='AMERICAN_AMERICA.UTF8' 21 0.011294
4 ETW000 application info callback registered 16 0.011310
4 ETW000 Client NLS settings: 'AMERICAN_AMERICA.UTF8' 3166 0.014476
4 ETW000 Logon as OPS$-user to get SAPSR3's password 36 0.014512
4 ETW000 Connecting as /@QXI on connection 0 (nls_hdl 0) ... (dbsl BIN 220507)
4 ETW000 50 0.014562
4 ETW000 Nls CharacterSet NationalCharSet C EnvHp ErrHp Er
rHpBatch
4 ETW000 35 0.014597
4 ETW000 0 UTF8 1 2bcdc70 2bd56c0
2be5df8
4 ETW000 28 0.014625
4 ETW000 Allocating server context handle 35 0.014660
4 ETW000 Attaching to DB Server QXI (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 77 0.014737
4 ETW000 Assigning server context 2be8018 to service context 2be5d28
4 ETW000 25597 0.040334
4 ETW000 Starting user session (con_hdl=0,svchp=2be5d28,srvhp=2be8018,usrhp=2bd5ed8)
4 ETW000 71 0.040405
4 ETW000 OCI-call failed with -1=OCI_ERROR 3460 0.043865
4 ETW000 SQL error 1034: 'ORA-01034: ORACLE not available
4 ETW000 ORA-27101: shared memory realm does not exist 103 0.043968
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 51 0.044019
4 ETW000 server_detach(con_hdl=0,stale=1,srvhp=2be8018) 18 0.044037
4 ETW000 Detaching from DB Server (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 30 0.044067
4 ETW000 Deallocating server context handle 2be8018 from con_hdl=0
4 ETW000 233 0.044300
4 ETW000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 52 0.044352
4 ETW000 set_ocica() -> OCI or SQL return code 1034 26 0.044378
4 ETW000 OCIErrorGet -> SQL error code: 0 54 0.044432
4 ETW000 error text: 'ORA-01034: ORACLE not available 18 0.044450
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 Try to connect with default password 30 0.044480
4 ETW000 Connecting as SAPSR3/@QXI on connection 0 (nls_hdl 0) ... (dbsl BIN 220507)
4 ETW000 32 0.044512
4 ETW000 Nls CharacterSet NationalCharSet C EnvHp ErrHp Er
rHpBatch
4 ETW000 30 0.044542
4 ETW000 0 UTF8 1 2bcdc70 2bd56c0
2be5df8
4 ETW000 29 0.044571
4 ETW000 Allocating server context handle 17 0.044588
4 ETW000 Attaching to DB Server QXI (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 41 0.044629
4 ETW000 Assigning server context 2be8018 to service context 2be5d28
4 ETW000 23436 0.068065
4 ETW000 Assigning username to user session 2bd5ed8 23 0.068088
4 ETW000 Assigning password to user session 2bd5ed8 41 0.068129
4 ETW000 Starting user session (con_hdl=0,svchp=2be5d28,srvhp=2be8018,usrhp=2bd5ed8)
4 ETW000 33 0.068162
4 ETW000 OCI-call failed with -1=OCI_ERROR 2900 0.071062
4 ETW000 SQL error 1034: 'ORA-01034: ORACLE not available
4 ETW000 ORA-27101: shared memory realm does not exist 73 0.071135
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 55 0.071190
4 ETW000 server_detach(con_hdl=0,stale=1,srvhp=2be8018) 20 0.071210
4 ETW000 Detaching from DB Server (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 25 0.071235
4 ETW000 Deallocating server context handle 2be8018 from con_hdl=0
4 ETW000 144 0.071379
4 ETW000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 32 0.071411
4 ETW000 set_ocica() -> OCI or SQL return code 1034 16 0.071427
4 ETW000 OCIErrorGet -> SQL error code: 0 51 0.071478
4 ETW000 error text: 'ORA-01034: ORACLE not available 19 0.071497
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 ***LOG BY2=>sql error 1034 performing CON 131 0.071628
4 ETW000 ***LOG BY0=>ORA-01034: ORACLE not available 21 0.071649
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'QXI'"
If the database is up everything works. Here is the output of "R3trans -d"
R3trans -d
This is R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
unicode enabled version
R3trans finished (0000).
For me this all looks o.k. when the database is down R3trans won't be able to reach it and if the database is up it works. But why I can't then just execute "sapstart" ?
Edited by: Dirk Rödl on Jun 19, 2009 9:46 AM
Edited by: Dirk Rödl on Jun 19, 2009 9:48 AM
Edited by: Dirk Rödl on Jun 19, 2009 9:49 AM -
How to get latest CPU patch information
Hi Gurus,
Good Morning.
How to get latest CPU patch information for our EBS 11i system, how to get alerts when ever they released CPU patches.CheckĀ the SAWWAN'S Excellent previous post regarding developer patches , this post will give you entire information about Developer patches.
Re: how to find the developer version
Re: Developer 6i patches
Check this metalink notes , hope this helps.
Note: 466890.1 - Script to find Apache, Java, Jinitiator, Forms version and JVM details for Oracle E-Business Suite 11i
Note: 392793.1 - How to Obtain Oracle Forms Version in Oracle Applications 11i from Command Line
Edited by: Amigo on Dec 22, 2010 9:20 AM
Edited by: Amigo on Dec 22, 2010 9:21 AM
Edited by: Amigo on Dec 22, 2010 9:26 AM -
Hi,
Has anyone deployed CPU patches for 12c OEM? In the recent Jul, 2012 CPU patch there is patch for Oracle Database Plug-ins, has anybody deployed this Jul ,2012 CPU patch for 12c OEM.
Enterprise Manager Plugin for Database 12c Release 1, versions 12.1.0.1, 12.1.0.2 Enterprise Manager
Thanks
AmitI have requested the "on request" patch for the Oracle Database Management Plug-in for the 12.1.0.1 Home, but was told by Oracle Support that there was no patch. I am on Solaris Sparc 64. I looked at the CVE-2012-1737 advisory, and I am trying to figure out if the vulnerability does not apply to my platform, but frankly can't figure it out from that document, and the support person did not elaborate. Have you been given a patch?
Regards,
Peggy -
Steps to apply cpu patch on RAC
Hi All,
I am applying cpu patch to rac environment first time.It is a 2 node rac.Kindly let me know the methods and how to apply cpu patch on 2 node RAC.
Regards
RajHi user8884603,
as Rajesh has mentioned, all info is in the readme file, but lookout specifically:
If you can apply the patch while the DB is open or CRS is started.
If you must apply the patch on all nodes in the cluster or only from 1 node.
As which user specific tasks must be done.
Hope this is helpful.
Regards.
Maybe you are looking for
-
Notes or patch for Import/STO pricing Procedure.
Hi All.. I want to copy Import -JIMPORT and STO pricing procedure. I am having RM0000 only. I am in ECC6 but its not there.Can you pls tell me the patch or notes that i have to apply to get the Import pricing procedures. Earliest help will be useful.
-
Feature Request: External Monitor!
Please make Front Row work on external monitors without having to change the primary monitor to the external. This is a major pain, and it must be common for lots of people to use their large displays as a secondary monitor, so I'm frankly baffled at
-
Sending mail with php via postfix to EIMS running on the same machine.
Hello it was suggested I clarify and repost this question as previously I had posted it in a already answered thread, I am running EIMS as my mail program on my Mac OS 10.4.6 Server for email. http://www.eudora.co.nz/ I need to send email through the
-
T-Sql update to ntext containing XML
I need to query to find records with a node that has a particular value, then update another node in the xml. I did a round about query with temp tables because I couldn't figure out how to do the cast and the query in the xml in the same step. but n
-
hey hii i just wanted to know that is there any way to just find the syntax a inbuilt function in oracle?? like we have in cmd in windows or ny other thing the help command so we can know waht r the arguments required in that function.