Notes or patch for Import/STO pricing Procedure.

Hi All..
I want to copy Import -JIMPORT and STO pricing procedure.
I am having RM0000 only.
I am in ECC6 but its not there.Can you pls tell me the patch or notes that i have to apply to get the Import pricing procedures.
Earliest help will be useful.
Thanks
R.Kanann..

Hi Sai
Your import pricing procedure shall contain the following:
1) Delivery costs for Custom clearance
  - Custom duty
  - CVD
  - Ecess on CVD
  - SEcess
  - Ecess on customs
  - Addl custom duty
2) Delivery cost for agent charges
3) Local freight charges
All the above condition types are delivery costs only.
For every condition type, you will maintain the vendor, so that the respective condition delivery costs can be processed based on the document.
As soon as the material received at port, you will do MIRO for all the duties
By the the material reached banglore, you will do goods receipt.
The local freight can be processed based on the requirement (either before GR or after).
warm regards
sairam akundi

Similar Messages

  • Intra Company STO pricing Procedure assignment

    Hi
    In intracompany STO we need to raise invoice from the supplying plant to receiving plant.So i created STO pricing Procedure with Cost price plus Profit margin and transportation cost .Now where to assign this pricing procedure?Whether to assign this to NL Delivery doc type or in IV billing doc type.
    Regards
    Jyoti

    JYOTI PRAKASH KUNNAR,
    1. The Delivery Type that you use is NL for Intra company STO
    2. PO Document Type you use is UB
    you will mainatin Assignemnt of the above
    img>material managment>purchasing>purchase order>set up stock transport order--->assign delivery and checking rule
    3. NLN is item category used for Intra STO
    4. STock Transfer pricing procedure is maintained in SD for Billing with Docu PP + Custpp
    5. The Flow of Pricing is taken care by copy controls VTFL choose NL Delivery type and intra company billing type , choose item category NLN where Pricing type = B, Price Source = Purchase order.
    BEing INTRA stock scenario we don't use IV billing. Because transaction is happening within company code between two plants.
    Check the link it will be useful
    [http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm]
    Regards
    Sathya

  • STO Pricing Procedure

    Hi all,
    Is there any difference in STO Pricing for STO- MM module and IS-retail MM Module.
    Which STO Pricing Procedure to use in IS-Retail..Please Help.
    Regards
    Gibi Philip.

    I would agree, there is no changes from configuration point of view. The way MM-Pricing procedure is defined, in the same way Pricing procedure is defined in IS-Retail.
    Depending on the business requirement, you can define pricing procedure relevant to STOs.
    Rgds

  • Requirements not fullfilled for Condition type - Pricing Procedure

    When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

    Hi Sunil,
         Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is,  once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of  ABAP'er regarding this requirement if it is customized requirement.
    We should know the purpose of requirement in condition type.
    Venkat.

  • Import meterial pricing procedure steps, accruvals doubt in freight conditi

    pls guide me , what steps are  involved to import meterial in pricing procedure?
    accrols and account keys maintain for freight conditon types , both we have to maintain or only one? if maintain in automatic account determination maintain same G/L ACCOUNT number will maintained or different no's will be maintained?

    Hi Sai
    Your import pricing procedure shall contain the following:
    1) Delivery costs for Custom clearance
      - Custom duty
      - CVD
      - Ecess on CVD
      - SEcess
      - Ecess on customs
      - Addl custom duty
    2) Delivery cost for agent charges
    3) Local freight charges
    All the above condition types are delivery costs only.
    For every condition type, you will maintain the vendor, so that the respective condition delivery costs can be processed based on the document.
    As soon as the material received at port, you will do MIRO for all the duties
    By the the material reached banglore, you will do goods receipt.
    The local freight can be processed based on the requirement (either before GR or after).
    warm regards
    sairam akundi

  • BED, AED not appearing @ MIGO for Import

    Hi,
    Import Pricing procedure is working fine at our production client. When we try the same at our testing client I'm facing this problem. AED & BED values are not appearing at excise item tab by default (at the time of MIGO), in fact it'll remain blank and we need to feed in values manually, whereas Ecess & SHEcess appears automatically fetching the values from Invoice verification.
    Experts please advise, thanks in advance.
    Warm Regards,
    Rajoo

    Hi Uttkarsh,
    1. Tax code is V0
    2. Yes
    3. The values of BOE
    4. Yes
    The same procedure at production client is working well so there should be a setting in customizing which is available at Production & not at Testing?
    Thanks,
    Rajoo

  • Pictures in Idisc not showing up for import into aperture 3

    When I attempt to import photos from the Idisc into Aperture the photo are not visible in the import window.  This is also true for a thumbdrive.  I can see them on the Idisc or thumbnail drive if I open the disc or thumb drive and I can open them directly into finder.  Why are they not visible from within Aperture?

    Select a button and see if the asset is set to be the video and appropriate timecode where there's actually a picture and not a black screen (depending on what kind of production this is, obviously..)

  • Bluprint for billing and pricing procedure

    Can anyone send me the blueprint for Billing..
    thanks
    shravanthi

    Hi Sonu,
    The Billing Relevance field only tells you whether the material should be carried over to the invoice document or not. An item in quotation, wtih item category AFN, is never be billable and should appear in the invoice document and hence would have Billing Relevance as not relevant. However, the customer or user might need to know the price of material when quotation  is being created. For this the pricing field should be used. If the pricing is set as not relevant then the system does not carry out the pricing calculation. So you could have item categories not relevant for billing but relevant for pricing and vice versa. Use AFN and TANN for comparision.
    Regards
    Nadarajah Pratheb

  • AED not calculated properly for imported capital Goods

    Dear All,
                 I am facing one error while capturing Excise Invoice for Imported capital goods .While performing this AED set off reflecting is 100% which is supposed to be 50%.For raw material its calculation is correct .Any solutions.                                                                               
    Thanks.

    Hi
    check following link
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?QuickLink=index&overridelayout=true]
    Regards
    kailas ugale

  • Import for Trading Material Pricing Procedure

    Hi Everybody.
    My client have a scenario that, they want to make import for a trading materials,(Pricing control is Standard Price) The customs duties like CVD, ECess & Addnl Duty will be Non Modvat. Since it is a Non modvat it will add to the Material cost in actual process. But for my client it should not add to the Material cost and Exchange rate in PO Header level it should not fixed while making PO and posting GR, since exchange diff. rate will add to another account because of STD price.
    Please let me know the solution for this scenrio if anybody experienced.
    regds,
    Dhanu

    Yes, that I understood,
    How to avoid Non Modvatable condition values to add Material Cost if it is Standard Price in Import.
    regds.

  • Why do I not get artwork for imported cds on a windows 7 pc?

    Can anyone tell me why since upgrading from windows XP to Windows 7 I do not seem to be able to retrieve any artwork automatically from itunes when importing CDs?

    Wow, thanks for your reply Ann.  I just went into my calendar, and clicked on a past birthday (which all got imported when I switched phones (used to get notifications on the iPhone)) and it seems I need to go into each contact that has a birthday listed and edit it...There MUST be an easier way!  I've looked in the settings and NOTHING.

  • Condition Type JSRT not picking Condition Base Value in Pricing Procedure

    Hi Friends,
    In a procedure System is not picking condition base value for condition type JSRT. I have checked the tax procedure and found alternative Cal Type is 17 and is working fine for Domestic vendors.
    Friends i need your help in sorting out this issue. Pls suggest what I can check in order to sort out this issue.
    Rgds, Krishan Raheja

    Hello!
    In TAXINN the base value for the condition JSRT is picked up from step 100.
    I suggest that you change the "From" value to 100 instead of whatever you may be using
    Then test the transaction once again.This will not affect your normal service tax calculation either. So please make this change & try using S1 for planned delivery cost.
    Hope this helps !
    Cheers!
    Plauto
    Edited by: Plauto Abreu on Feb 11, 2011 9:03 PM

  • ORA-12154: TNS:could not ... for imported pl-sql function in Process Flow

    Hi
    I included in a process flow a PL-SQL function as user defined transformation.
    This PL-SQL function resides in my source database, from where I imported it in OWB.
    When I am trying the run the Process Flow (from control center manager) I get the following message upon executing that function.
    ORA-12154: TNS:could not resolve the connect identifier specified
    When I don't include that function my process flow works. Mappings in my process flow read from the same source database as where the function is.
    So I don't think it is caused by a problem with tnsnames.ora..
    Thanks in advance for anybodies help.
    Hans

    Hi Oleg,
    Thanks for your reply. Indeed I didn't create a runtime repository.
    However don't like to do that to for the source DB.
    I wonder if I can get around that by executing a SQLplus script instead.
    I tried this but my script does never complete when it is started from the process flow. If I run it in SQLplus it runs fine and completes instantly.
    My script does:
    update 1 column in one record of a table.
    commit;
    exit;
    What do you think?
    Thanks,
    Hans

  • Not availing CVD for Import material

    Hi All,
    My client has one requirement ,  they are importing few materials as a part of their Final goods  and they do export , since Export order in Indian scenario does not subject to Excise Duty , hence they dont want to avail CVD for those type of Import Purchase order and also they do not want the duties to add in import material cost. How can we differentiate in SAP like this Import PO is for Export purpose ? how to not pass the CVD value to the imported material cost ? and finally for other import PO they take CVD normally.
    Thanks in advance
    Benny

    hi,
    - Is ur client running EOU( Export Oriented Unit) ?
    If yes then they have duty exemption.... else they need to pay duty..... and offsetting entry should be on to Inventory(material Cost).....
    To differenentiate PO material is for export purpose create separate Po type and also track the same material through manual batch management.... Export and Domestic batches..
    regards,
    sujit borse

  • One Step GI - GR is not getting created for an STO

    Good Morning All,
    Actually we have made a setup that whenever we create a Goods Issue for STO type (UB - PO ) in the supplying plant we are creating the GR in the background . WE have made the configuration in SAP R/3 version 4.6c with One STEP Movment, that is when we create the GI (351 ) movment then GR (101) should be created automatically. Actually its not working properly. And sometimes it creates the GR with the USer as WF-BATCH.
    Let me know where exactly I need to check for the failure.
    In such cases if there is error in the background process, means, is there any transaction where it shwos the authorization or other failures happened to the system.
    Advance thanks....
    regards,
    Sabari Prabhu.

    Dear Venkadesh,
       Which Batch job should i need to check for this.Because I am not seeing any batch job relatred to that.
    Regards,
    Sabari Prabhu.

Maybe you are looking for