Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

Similar Messages

How to create the Data Type for the receiver end?

Hello Expertise
I wanted to Create a Data type for Receiver end in PI.
Sender end is ECC.
Receiver end is SRM
Here's the Data type for Sender end as
Can anyone help to create the Data type for Receiver end i.e SRM.
Thanks in advance.
Regards
karan

Hi Karan,
Please don't call Sir, we are just trying to help each other.
Please go through below scenario's and check your configuration.
ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
regards,
Harish

The data type DEC while downloading from ALV to EXCEL

The data type DEC while downloading from ALV to EXCEL is giving some invalid data .
Ex : In ALV field is the time difference in hours:minutes
if the value is :23 in Excel it will be 22:59 .
Please Suggest immediately

Hi ....
I have the similar problem. My coumns are not in any sequence when I download it to excel sheet.
How do I fix it.
Neha

What should be the data type for a field in ztable?

i am desing a ztable , wht should be the datatype for a field if i want to enter values like -1.5 and -2.5 , negative values with decimals what should be the data type???

declare as P type. TYPE P DECIMALS 1
Type P data allows digits after the decimal point. The number of decimal places is generic, and is determined in the program. The value range of type P data depends on its size and the number of digits after the decimal point. The valid size can be any value from 1 to 16 bytes. Two decimal digits are packed into one byte, while the last byte contains one digit and the sign. Up to 14 digits are allowed after the decimal point. The initial value is zero. When working with type P data, it is a good idea to set the program attribute Fixed point arithmetic.Otherwise, type P numbers are treated as integers.
You can use type P data for such values as distances, weights, amounts of money, and so on.
Also check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2fd9358411d1829f0000e829fbfe/content.htm
Regards,
Maha

What is the data type for the Data Dashboard XY Graph?

Hey all,
I am playing with the new Data Dashboard (!!) on my iPad 2 and am having trouble setting up the shared variables that host data to the XY Graph.
On my PC, in my Project (inside of a variable library) I have set up shared variables for all of the other controls/indicators available in the app; They all work great. However, I have not been able to identify the data type that is for the XY Graph in Data Dashboard. Of course, inside LabVIEW, I use a cluster of 2 arrays; this is not an available data type that I can select while creating a new variable on the hosting side. I have even gone so far as to create a custom control from my XYGraph in LabVIEW and then creating the data type "From Custom Control..." with no success.
What gives? Am I missing something obvious? Thanks for the help!!
Tom
Solved!
Go to Solution.

Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

What is the data type for time and what to insert

Hi there
i had two attributes in a table called start_time and end_time and i want to insert time into these attrbutes e.g 10:00 and 11:00
How do i do that
what is oracle's built-in type for time???
adn how do i insert values in the table(i.e the format)
thanks

There is not Oracle type that has just a time. The DATE and TIMESTAMP data types include both the date and the time (TIMESTAMP has millisecond resolution and has optional timezone support). If what you're really interested is a time interval (i.e. 1 hour), there are some INTERVAL data types.
You have a lot of options for how to specify dates and timestamps along with format masks.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Proper Data type for transferring XML from ABAP to XI

Dear Colleagues,
I have a question on how to wrap XML data, that itself contains an encoding
declaration, so that it will be properly transferred to XI.
XML Generation: "always use X"
I have searched a lot on SDN and other resources but could not find
information, describing how a web service should wrap unicode-data when
making it available to XI. The XML processing group emphasizes that all generation of XML should be done using X-bases (HEX) datatypes in ABAP and preferably using UTF-8 as ancoding. This by itself is not a problem.
But transferring UTF-8-XML - through which interface?
When a webservice provides an XML Stream and wants to transfer it to XI then there is a bit of a paradox situation, because it has to choose between using an X-based or Character-based type for its interface
-> as Binary data?
- when using X-based data types in the interface, I have control of the character encoding, but I expect that the XML-information will probably be wrapped in base64 encoding and then the XI will receive a base64 encoded
XML-block instead of "plain" XML.
I did not find any reference information on how the soap interface of XI and the WAS behave when transferring X-based data, however.
-> as Character data?
- on the other hand when using Character-based data types (e.g. String), I have no control of the codepage being used. I have then only the choice to generate the default encoding of the application server. Maybe this encoding
will be transformed later to a different encoding, but usually during this process the header, which declares the encoding in use will not be adapted as well.
So if I have a unicode machine, it will generate UTF-16 - based XML. I have no other choice, if I use a character-based type for output. And this will also be stated in the header of the XML stream. If the XML stream
leaves the system it will probably be transformed to UTF-8, but the XML-header will still state the content to be UTF-16, because the header will probably not be auto-converted together while adapting the Character
encoding.
Because of these issues I am quite insecure, on how to generate and wrap UTF-8 - based XML, so that I can properly hand it over to XI, ensuring that
it stays UTF-8 and that XI can really unwrap it automatically.
Does anyone have a tip in which type to wrap XML-based data on the ABAP stack so it will be usable in XI?
Thank you very much for your attention and time.
Yours
Christian Steinert

Something like this should work (with a little tweek I imagine)
This would be in the 'Command on Target':
OdiFtpGet "-HOST=<%=odiRef.getInfo("SRC_DSERV_NAME")%>" "-USER= '<%=odiRef.getInfo("SRC_USER_NAME")%>'" "-PASSWORD= <%=odiRef.getInfo("SRC_PASS")%>" "-REMOTE_DIR=<%=odiRef.getInfo("SRC_SCHEMA")%>" "-REMOTE_FILE=<%=odiRef.getTable("L", "COLL_NAME", "W")%>" "-PASSIVE_MODE=YES"
Set the Technology of the 'Command on Source' as File, and the technology of the 'Command on Target' as ODI Tools
Edited by: Bos on Jun 30, 2011 11:53 AM

Data Load for 20M records from PSA

Hi Team,
We need to reload a huge volume of data (around 20 million records) of Billing data (2LIS_13_VDITM) PSA to the first level DSO and then to the higher level targets.
If we are going to run the entire load with one full request from PSA to DSO for 20M records will it have any performance issue?
Will it be a good approach to split the load based on ‘Billing Document Number’?
In Case, If we the load by 'Billing Document Number'; will it create any performance issue from the reporting perspective (if we receive the data from multiple requests?) Since most of the report would be ran based on Date and not by 'Billing Document Number'.
Thanks
San

Hi,
Better solution put the filter based on the year and fiscal year.
check the how many years of data based on the you can put filter.
Thanks,
Phani.

How to change the data type of a field in an internal table dynamically ?

I have an internal table :
Data: Begin of itab_data occurs 0,
field1 type i,
field2 type p decimals 2,
end of itab_data.
My requirement is to decide the number of decimals of "field2" dynamically .
ie. based on the input in selection-screen , the declaration has to change .How can this be done ?
Hope the question is clear..
Its urgent. Please help me.
Thanks in advance .
Shankar

I dont think you can change it dynamically...but as per your requirement ...why dont you define the variable with maximum decimal length and depending on the parameter(from your selection-screen) use the WRITE command to populate it with the specified decimals.
Example
begin of itab
field2 type p decimals 5.
end of itab.
write itab-field2 to lfield decimals p_dec.
Message was edited by: Anurag Bankley

Data Type for a Longitude/Latitude Column in an Oracle dB Table?

Greetings All,
What is the recommended data type for a Longitude(Lon) or Latitude(Lat) Column of an Oracle dB Table? I am creating a signs inventory table in our Oracle database to be used as a data warehouse for our signs inventory. The Lon and Lat fields along with some other data will be populated from a MS access file exported from our Geodatabase. Currently the data type for the Lon and Lat fields of the MS access file is defined as "Double". A couple of Examples of the Lon and Lat data are as follows:
Lat                       Lon
59.4564555909     -135.3133542922
64.841125            -148.01808
...What data type should these two columns be defined in the new Oracle database table??? Should the data type be defined as FLOAT(126), NUMBER(10, 6), or else? Any suggestions/help on this would be greatly appreciated.
If the data type is defined as NUMBER(10,6), the first example of Lon "-135.3133542922" will be truncated to "-135.313354" or would I receive an error while trying to import the data from an access file to the Oracle dB?
Thanks in advance for any/all the help.

Orchid,
Is SDO_GEOMETRY available in Oracle 10g?Yup. I'm still on 10g as well; there's no shame in that.
How do I format my lat/long's into WKT and use the SDO_GEOMETRY constructor?The March 16th example shows the steps, but I take it you're trying to get your data from MS Access into Oracle. Is that right? If so, consider these options:
OPTION 1, When you have < 50k records
Simply write a query that returns INSERT statements that you can run against Oracle.
For example, let's say you have a table in MS Access defined as msaCoords (ID, LongX, LatY).
Let's say, your destination table in Oracle is named oraCoords(ID NUMBER, Geometry MDSYS.SDO_GEOMETRY). Then,
SELECT "INSERT INTO oraCoords (ID, Geometry) VALUES (" & ID & ", SDO_GEOMETRY('POINT (" & LongX & "," & LatY & "'), 8307);" FROM msaCoords;
-- "MS-ACCESS QUERY RESULTS"
INSERT INTO oraCoord (ID, Geometry) VALUES (1, SDO_GEOMETRY('POINT (-135.3133542922,59.4564555909'), 8307);
INSERT INTO oraCoord (ID, Geometry) VALUES (2, SDO_GEOMETRY('POINT (-148.01808,64.841125'), 8307);Save those MS-ACCESS QUERY RESULTS to a text-file (D:\MyPts.sql). Launch SqlPlus and type @D:\MyPts.sql
Once it's done, type Commit into SqlPlus and you're done.
OPTION 2, when you have > 50k records
Use SqlLoader. There's an example posted { here | http://forums.oracle.com/forums/thread.jspa?messageID=9412123&#9412123 }
Cheers,
Noel

Data Type for Process Flow... PB with Date?

I've got a problem by passing parameters in process flow.
I have a mapping with a parameter DATE_EXEC (data type : DATE) and a default value that is TO_DATE('20/01/2007' , 'dd/mm/yyyy') . My mapping is working good when i launch it.
I have a process flow which contains the mapping. This process has a parameter DATE_EXEC (data type : DATE). I bind the 2 DATE_EXEC. But when i launch my mapping the value is not recognized, I try with :
- TO_DATE('20/01/2007' , 'dd/mm/yyyy')
- 20/01/2007
- 2007.01.20
- 2007-01-20
My question is what are the data type in process flow? They are not ORACLE TYPE.
For example , a parameter in a mapping which is a VARCHAR2 must be input between quotes but if you bind it to a parameter of a process flow which is a STRING (not ORACLE Data type) , you must input it without quotes?
Anybody has some rules about that?
I apologize for my english, i'm a french people.

Here is some information on the literal quote or not quote query and what I think you need to do at the end, hope it helps. Not exactly intuitive...since the flow designer (you) have to know what is a PLSQL object and what is not.
1. Literal = FALSE
When Literal = FALSE is set then the value entered must be a valid PL/SQL expression which is evaluated at the Control Center e.g.
'Hello World!'
22 / 7
2. Literal = TRUE
When Literal = TRUE then the value is dependent on the the type of Activity. If the activity is a PL/SQL object i.e. Mapping or Transformation, then the value is PL/SQL snippet. The critical difference here is that the value is macro substituted into the call for the object. The format of the value is identical to that entered as default value in the Mapping editor. e.g.
'Hello World!'
sysdate()
If the activity type is not a PL/SQL object then the value is language independent. e.g.
Hello World
3.1427571
What you should try......
Check the map activity parameter in your process flow to see if literal is false (an expression), set it to false and then try using your TO_DATE('20/01/2007' , 'dd/mm/yyyy') expression, deploy your flow and execute. Alternatively the user guide defines the DATE type for flow with the format YYYY-MM-DD so you can have the parameter value as '2007-01-20' use literal equal to true and remember and quote your value.
Cheers
David

How to change data type for a field?

Hi Experts,
I have one std screen having one field having numeric type. So it will accept only numeric value. Remember I am using standard transaction.
Now my user wants to enter the special character like + or - in that field(having data type numeric).
How i can change the data type for the particular field so that it will also accept + or -?
Plz reply me as earliest as possible.
Thanks in advance.

Hi salil ,
u have to change / create Domain of that Data Element.
but u have to check the Implications. i have done the same thing , but that one is Customer defined one , i got nearly 20 short dumps while doing the TP.
regards
Prabhu

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

Meet a problem of data exchange for sale order from CRM to R3.

Dear Friends:
      I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
      When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible", so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute '     FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system". so i check the order in R/3 ,it has already been create and without any error messages.
   Would like to tell me how to solve it . thanks your any idear..

Hi Benjamin,
When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly.
Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
<b>On R/3 system:</b>
- Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
- Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
- Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
- Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
- Check for any short dumps in R/3 (ST22/ST21)
<b>On CRM:</b>
- Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
- What does the CRM Middleware Trace show (SMWT)? Sometimes this has more detail than the specific BDoc overview (SMW01)
- Check for short dums in CRM (ST22)
Let us know what else you uncover and we can work from there.
Brad

Query regarding the data type for fetcing records from multiple ODS tables

Similar Messages

Maybe you are looking for