Query selection problem

Hi gurus,
In my query, in selection screen, i am giving the material, plant and reporting date.
now i want to caliculate the reseravations quantity from the reporting date to 16 weeks future.
for example,
selectin screen: material - 1199140, plant - 1800 and reporting data - 11/26/2007
the data available in my cube is
material    plant     reporting date    quantity
1199140   1800     11/03/2007         100
1199140   1800     11/16/2007         108
1199140   1800     01/01/2008         5600
1199140   1800     02/21/2008         450
1199140   1800     04/10/20008       7852
my issue is when i execute a query with this selection conditions.
i am getting the 'no data available' because the selection conditions not satisfing.
i can't give the date intervals. based on the given date the query should execute 16 weeks future data.
Can any one help me.
Thanks in advance.

Hi sam,
thanks for reply.
here my problem with date selection in the query execution.
i have created the restricted key figure with the same procedure.
my peoblem is, the selection conditons which i am giving for reporting date, there is no recods in my cube.
in the query execution, i can give single value date only. based on this date i want to calculate the quantity even though the date is not available in the cube.
thanks

Similar Messages

Select query join problem

hey guys,
i've used a select query to get details from KNA1, KNVV, ADRC, KNVP, pa0002. tables by joining. but i'm getting only about 170 records. there are more than 3000 records in the database. for each tables. here is my select query
SELECT KNA1KUNNR KNA1NAME1 KNA1NAME2 ADRCSTR_SUPPL1 ADRCSTR_SUPPL2 ADRCSTR_SUPPL3 ADRCCITY1 KNVVVWERK KNVPPERNR PA0002VORNA PA0002NACHN KNVVVKBUR KNVVKDGRP KNA1STCD1 KNA1~STCEG
    INTO CORRESPONDING FIELDS OF TABLE IT_FINAL FROM KNA1
    INNER JOIN KNVV ON KNA1KUNNR = KNVVKUNNR
    INNER JOIN ADRC ON KNA1ADRNR = ADRCADDRNUMBER
    INNER JOIN KNVP ON KNA1KUNNR = KNVPKUNNR
    INNER JOIN PA0002 ON KNVPPERNR = PA0002PERNR
    WHERE KNA1KUNNR IN S_KUNNR AND KNVVVWERK in P_VWERK AND PA0002PERNR IN S_PERNR AND KNVVVKBUR IN S_VKBUR AND KNVV~KDGRP IN S_KDGRP.
can anyone tell me the problem in the above query.
thanks.

Hi
you are using tables KNA1, KNVV, ADRC, KNVP, pa0002.
Create internal table for each table mentioned above with all the primary keys and find the links between them
then select data in one table and select data from another table into your internal table for all the entries exists in firs internal table.
go for below links.
http://www.sapdev.co.uk/abap/commands/select_forallentries.htm
http://wiki.sdn.sap.com/wiki/display/ABAP/FORALLENTRIES-Home+page
http://help.sap.com/abapdocu_70/en/ABENWHERE_LOGEXP_ITAB.htm
Thanks
lalit

Selection problem on ADRC Table.

Dear Exparts.
please see the Query:
select country city1 from adrc
into CORRESPONDING FIELDS OF wa_country
where
country = p_country
and
city1 = p_city.
append wa_country to it_country.
endselect.
In this selection, when I send p_country = AE and p_city = Dubai I cannot get any data. But there have data In DB.
But when I send p_country = DE and p_city = Berlin I can get porper data.
Can anybody solve this problem.
Your regards
rayhan

Just paste the below code and check either getting value or not
DATA wa_country TYPE adrc.
PARAMETERS: p_city TYPE adrc-city1 DEFAULT 'Dubai',
p_countr TYPE adrc-country DEFAULT 'AE'.
SELECT SINGLE * FROM adrc INTO wa_country WHERE country = p_countr
AND city1 = p_city.
IF sy-subrc = 0.
WRITE : / wa_country-city1, / wa_country-country.
ENDIF.
Kanagaraja L

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

About query related problem

hi ,
we are generate query in 2005b,and procced for execuite query.following problem occure'<b>odbc sql server driver'[sql server] syntax error the converting the nvarchar value' 70302/20307' to column of data type int received alert OAIB</b>
QUERY SHOWN BE AS FOLLOW.
SELECT T5.DocNum as'Po. No. ', T5.DocDate as 'Po Date',T0.CreateDate,T5.NumAtCard as 'Man.PO. No/ Dt.', T0.DocNum as'AP No. ', T0.DocDate as 'AP Date',T0.NumAtCard as 'Vendor Ref. No.', T0.U_vbdt as 'Vendor Ref. Date', T0.CardName as 'Vendor', T1.Dscription as 'Item', T1.Quantity AS 'QTY' , T1.Price as 'Basic Rate', (T1.Price *T1.Quantity) as 'Value',T0.Comments as 'Po No. & Po.Dt.' FROM OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN OPDN T3 ON T2.CardCode = T3.CardCode INNER JOIN PDN1 T4 ON T3.DocEntry = T4.DocEntry INNER JOIN OPOR T5 ON T2.CardCode = T5.CardCode INNER JOIN POR1 T6 ON T5.DocEntry = T6.DocEntry INNER JOIN OITM T7 ON T1.ItemCode = T7.ItemCode INNER JOIN OITB T8 ON T7.ItmsGrpCod = T8.ItmsGrpCod WHERE ( T1.BaseRef = T3.DocNum ) AND ( T4.BaseRef = T5.DocNum ) AND ( T0.U_vbdt >=[%25]AND T0.U_vbdt <=[%26]) AND ( T4.Dscription =T1.Dscription ) AND ( T4.Dscription = T6.Dscription ) AND (( T1.Dscription=[%0] OR T1.Dscription=[%1] OR T1.Dscription=[%2] OR T1.Dscription=[%3] OR T1.Dscription=[%4] OR T1.Dscription=[%5] OR T1.Dscription=[%6] OR T1.Dscription=[%7] OR T1.Dscription=[%8] ) OR ( T0.CardName=[%10] OR T0.CardName=[%09] OR T0.CardName=[%27] OR T0.CardName=[%28] ) OR (( T8.ItmsGrpNam =[%11] oR T8.ItmsGrpNam =[%12] OR T8.ItmsGrpNam =[%13] OR T8.ItmsGrpNam =[%14] OR T8.ItmsGrpNam =[%15] OR T8.ItmsGrpNam =[%16] OR T8.ItmsGrpNam =[%17] OR T8.ItmsGrpNam =[%18] OR T8.ItmsGrpNam =[%19] ) and ( T7.U_FirmName =[%20] OR T7.U_FirmName =[%21] OR T7.U_FirmName =[%22]
oR T7.U_FirmName =[%23] OR T7.U_FirmName =[%24] )) )

Hi Vishal,
the value '70302/20307' is not an whole number so converting it to an int is not possible.
You should check your data for this value an change your query or data.
Regards
Ad

Query performance problem

I am having performance problems executing a query.
System:
Windows 2003 EE
Oracle 9i version 9.2.0.6
DETAIL table with 120Million rows partitioned in 19 partitions by SD_DATEKEY field
We are trying to retrieve the info from an account (SD_KEY) ordered by date (SD_DATEKEY). This account has about 7000 rows and it takes about 1 minute to return the first 100 rows ordered by SD_DATEKEY. This time should be around 5 seconds to be acceptable.
There is a partitioned index by SD_KEY and SD_DATEKEY.
This is the query:
SELECT * FROM DETAIL WHERE SD_KEY = 'xxxxxxxx' AND ROWNUM < 101 ORDER BY SD_DATEKEY
The problem is that all the 7000 rows are read prior to be ordered. I think that it is not necessary for the optimizer to access all the partitions to read all the rows because only the first 100 are needed and the partitions are bounded by SD_DATEKEY.
Any idea to accelerate this query? I know that including a WHERE clause for SD_DATEKEY will increase the performance but I need the first 100 rows and I don't know the date to limit the query.
Anybody knows if this time is a normal response time for tis query or should it be improved?
Thank to all in advance for the future help.

Thank to all for the replies.
- We have computed statistics and no changes in the response time.
- We are discussing about restrict the query to some partitions but for the moment this is not the best solution because we don't know where are the latest 100 rows.
- The query from Maurice had the same response time (more or less)
select * from
(SELECT * FROM DETAIL WHERE SD_KEY = 'xxxxxxxx' ORDER BY SD_DATEKEY)
where ROWNUM < 101
- We have a local index on SD_DATEKEY. Do we need another one on SD_KEY? Should it be created as BITMAP?
I can't test inmediately your sugestions because this is a problem with one of our customers. In our test system (that has only 10Million records) the indexes accelerate the query but this is not the same in the customer system. I think the problem is the total records on the table.

Query designing problem while applying cell properties

Hello Experts,
I have a problem while designing query. Problem is as follow:
I have a calculated field on key figure column. This key figure calculates variance between 2 columns.
for E.g I have 2 columns Budget and Actual and third column is %Variance which should be
1. ((Actual - Budget)/Budget) *100 or
2. ((Budget -Actual)/Budget)*100, depening on some values on the row i should use any of these 2 formulas but the result should be dispalyed in single column % Variance.
how can i change the formula in key figures depending on these conditions. I can achieve this by applying cells but i dont want to do so as it is very complex way to desing these queries.
also let me know applying cells on query affects its performance or not?
Regards,
Nirav

Hi Nitin,
Your reply may help me.
But my exact requirement is not that. Requirement is as follow:
I have created Char. Structure in row which contains few rows as revenue and few rows as expense.
I created them by creating selections. Now in case of expense the variance should be (Budget-Actual)/Budget *100.
In case of revenue variance should be (Actual-Budget)/Budget *100.
So, here i have to find out revenue & expense char. iresspective of which one is greater.
Regards,
Nirav

Query has problem

Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
--                   and event.Poid_id0 >= 266838277921701888****
--                 and event.Poid_id0 < 267928993456455680****
--               and ebal.obj_id0 >= 266838277921701888****
--             and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--

848478 wrote:
Below query has problem .
Pls see the queries for Usage Summary with Partition and Without Partition
. I have executed this now so it may be in Buffer …****
DB Query ... SUM from event objects, bin variables
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
--                   and event.Poid_id0 >= 266838277921701888****
--                 and event.Poid_id0 < 267928993456455680****
--               and ebal.obj_id0 >= 266838277921701888****
--             and ebal.obj_id0 < 267928993456455680****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
SELECT sum(amount) , sum(quantity), event.poid_type,ebal.
resource_id,****
event.service_obj_type, event.service_obj_id0,ebal.
rate_obj_id0, ebal.OFFERING_OBJ_ID0, ebal.IMPACT_CATEGORY ****
FROM event_bal_impacts_t ebal, item_t item, event_tevent*
WHERE event.item_obj_id0 = item.poid_id0****
AND ebal.obj_id0 = event.poid_id0****
and event.Poid_id0 >= 264199450015039488****
and event.Poid_id0 < 265237388991660032****
and ebal.obj_id0 >= 264199450015039488****
and ebal.obj_id0 < 265237388991660032****
AND item.bill_obj_id0 = 148715294****
AND ebal.product_obj_id0 = 27433706****
AND ebal.account_obj_id0 = 146876519****
AND item.account_obj_id0 = 146876519****
AND event.poid_type like '%session/telco/gsm%'****
AND ebal.impact_category <> 'Free'****
AND resource_id not in (select resource_id from
resource_id_t)****
group by****
event.poid_type, ebal.resource_id,****
event.service_obj_type, event.service_obj_id0,****
ebal.rate_obj_id0, ebal.OFFERING_OBJ_ID0,ebal.
IMPACT_CATEGORY****
order by****
ebal.resource_id desc;****
--Consider getting the asterisk key fixed, since it results in invalid SQL syntax

BEx query selection screen takes long time to popup

Hi,
I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
I have run the statistics of the query and according to the statistics report the query takes a lot of time for the following component :
OLAP: Query Gen. 2681,312682
I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
Please advise how to proceed.
Thanks in advance,
Arash

Hi,
Please check the following notes which should be useful.
1387593 - Performance optimization for query change/generation
1416737 - Performance optimization for query change/generation(2)
1396485 - Performance optimization for query check/save
Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
1472915, 1506560) and repair/correct the different tables to optmize
the query definition tables.
Regards,
Amit

SQL query: select billaddress if no delivery address exist.

hi sql expert,
The Query shall filter all invoices by date, articles and show the delivery address. Problem: Not every customer has deposited a delivery address. In this case the billing address is to be taken.
How can this be done ?
This query
SELECT T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity] FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'
and T1.Itemcode = [%0] GROUP BY T0.[DocNum], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
UNION ALL
SELECT T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], -T1.[Price], -(T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt], ('-' + substring(T1.Freetxt,0,5)) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", -T1.[Quantity] FROM ORIN T0 INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]' and T1.Itemcode = [%0]
GROUP BY T0.[DocNum], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
Thanks a lot!

hi,
I think I got it now :-)
First: Show me priority all delivery addresses . Otherwise billing addresses:
SELECT T1.[CardCode], T2.[Street] FROM OCRD T1 INNER JOIN CRD1 T2 ON T1.CardCode = T2.CardCode WHERE NOT EXISTS
SELECT *
FROM CRD1 as T2
WHERE T2.[AdresType] = 's' and t1.CardCode = t2.Cardcode
union
SELECT T1.[CardCode], T2.[Street] FROM OCRD T1 INNER JOIN CRD1 T2 ON T1.CardCode = T2.CardCode
where T2.[AdresType] = 's'
secondly:
Filter all invoices by date, articles and show priority the delivery address else billingaddress and subtract the credits:
SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity]
FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode
WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'
and T1.Itemcode = [%0] and not exists (
SELECT *
FROM CRD1 as T3
WHERE T3.[AdresType] = 's' and t2.CardCode = t3.Cardcode
GROUP BY T0.[Cardcode], T0.[DocNum],T0.[CardCode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
union
SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity]
FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode
Where T3.[AdresType] = 's' and T1.Itemcode = [%0] and CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'
-- ab hier werden die Gutschriften abgezogen
union
SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], -T1.[Price], -(T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt], ('-' + substring(T1.Freetxt,0,5)) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", -T1.[Quantity] FROM ORIN T0 INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode WHERE CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]' and T1.Itemcode = [%0]
and not exists (
SELECT *
FROM CRD1 as T3
WHERE T3.[AdresType] = 's' and t2.CardCode = t3.Cardcode
GROUP BY T0.[Cardcode], T0.[DocNum], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], T1.[FreeTxt], T1.[Quantity]
union
SELECT T0.[Cardcode], T0.[CardName], T3.[ZipCode],T3.[Street], T1.[ItemCode], T1.[Dscription], T1.[ShipDate], T1.[Price], (T1.[Price] * T1.[Quantity]) as "Gesamtpreis in €", T1.[FreeTxt],substring(T1.Freetxt,0,5) as "Grundpreis in €",substring(T1.Freetxt,9,6) as "TS-Wert in %", T1.[Quantity]
FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OCRD T2 ON T0.CardCode = T2.CardCode INNER JOIN CRD1 T3 ON T2.CardCode = T3.CardCode
Where T3.[AdresType] = 's' and T1.Itemcode = [%0] and CONVERT(nvarchar(8), T1.ShipDate, 112) BETWEEN '[%FromDate]' AND '[%ToDate]'

SQL Query join problem

Hi,
I have two tables in my db, the patient table holds details of patients, the contact table holds details of contacts related to the patient.
patient table
patientid - primary key - int
patient name - varchar
contact table
contactid - primary key - int
patientid - foreign key from patient table - int
incontact - foreign key from paient table to relate contacts - int
My contact table has the following data:
contactid patientid incontact
2              19           21
2               19          22
I can retrieve data for the patients that have been in contact with patientid 19, by using the following join:
SELECT * FROM PATIENT
LEFT JOIN incontact
ON incontact.incontact = patient.patientid
WHERE incontact.patientid = 19
However, can you please tell me how I can get data from the patients table where the incontact is 21?
So I can get contacts from patients and patients from contacts?
Thankyou

Thanks very much for your replies again.
Basically, I have a table of patients, and I would like to link them to each other, many to many.
I populate the incontact table, which stores the original posted patientID, and the new generated patientID. I populate the DB with the code below.
<cfquery name="update" datasource="staffdirectory">
SET NOCOUNT ON
INSERT INTO patient (title,firstname,surname,gender,DOB,telephone,address1,address2,address3,town,postcode
VALUES ('#title#','#firstname#','#surname#','#gender#',#createodbcdate(createdate(startyear, startmonth, startday))#    ,'#telephone#','#address1#','#address2#','#address3#','#town#','#postcode#
SELECT @@Identity AS newid
SET NOCOUNT OFF
</cfquery>
      <cfquery name="insert" datasource="staffdirectory">
INSERT INTO incontact (related,incontact)
VALUES (#patientid#,#update.newid#)
</cfquery>
This works fine and I can get all related patients by usingthe following query:
SELECT * FROM patient
LEFT JOIN incontact
ON patient.patientid = incontact.related
WHERE incontact.incontact = #patientid#
MY problem occurs when I want to find related patients from the related column, the reverse relationship. I use this seperate query:
SELECT * FROM patient
LEFT JOIN incontact
ON patient.patientid = incontact.incontact
WHERE incontact.related= #patientid#
Is there a way I can combine both queries, or is there a better way I can achieve the same result?
Many thanks again

Query reusing problem

Hi, kodo team.
I have following code.
query = pm.newQuery(Weather.class, "regionCode==:regionCode && wxDate ==
:wxDate") ;
for (int i = 0; weatherVOs != null && i < weatherVOs.length; i++)
// query.setFilter("regionCode==:regionCode && wxDate == :wxDate");
parameters.put("regionCode", weatherVOs.getRegionCode());
parameters.put("wxDate", new
Timestamp(CommonTimeUtil.getGMTTime(weatherVOs[i].getWxDate(), "GMT+9",
"yyyy-MM-dd")));
Collection col = (Collection)query.executeWithMap(parameters);
Iterator iterator = col.iterator();
boolean bExist = false ;
When executeWithMap() method is first executed, It does good. but second
call has problem.
Kodo generates following SQL code.
3064 TRACE [main] kodo.jdbc.SQL - <t 3156264, conn 5600736> [6 ms]
executing prepstmnt 4093263 SELECT t0.REGIONCODE, t0.WXDATE, t0
..COUNTRYCODE, t0.DATEID, t0.MAXTEMP, t0.MINTEMP, t0.PREPAM, t0.PREPPM,
t0.WINDDIRD, t0.WINDSPEED, t0.WXCODE, t0.WXTEXT FROM EPSCHEDU
LE.SC_TWEATHER t0 WHERE (t0.REGIONCODE = ? AND t0.WXDATE = ?)
[params=(String) 11A00000, (Timestamp) 2004-11-10 15:00:00.0] [reused=
0] ------------------------> It's good
3273 TRACE [main] kodo.jdbc.SQL - <t 3156264, conn 5600736> [8 ms]
executing prepstmnt 18164 SELECT t0.REGIONCODE, t0.WXDATE, t0.C
OUNTRYCODE, t0.DATEID, t0.MAXTEMP, t0.MINTEMP, t0.PREPAM, t0.PREPPM,
t0.WINDDIRD, t0.WINDSPEED, t0.WXCODE, t0.WXTEXT FROM EPSCHEDULE
..SC_TWEATHER t0 [reused=0] ------------------------> It's bad.
And, I have follwing package.jdo file.
"ep.prm.mapper.TimeStampMapping" class is custom field mapping class.

<class name="Weather" objectid-class="WeatherPK">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="pk-column" value="REGIONCODE"/>
<extension vendor-name="kodo" key="pk-column" value="WXDATE"/>
<extension vendor-name="kodo" key="table"
value="EPSCHEDULE.SC_TWEATHER"/>
</extension>

<field name="regionCode" primary-key="true">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="REGIONCODE"/>
</extension>
</field>
<field name="countryCode">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="COUNTRYCODE"/>
</extension>
</field>
<field name="dateId">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="DATEID"/>
</extension>
</field>
<field name="wxDate" primary-key="true" persistence-modifier="persistent"
default-fetch-group="true">
<extension vendor-name="kodo" key="jdbc-field-map"
value="ep.prm.mapper.TimeStampMapping">
<extension vendor-name="kodo" key="column" value="WXDATE"/>
</extension>
</field>
<field name="wxCode">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="WXCODE"/>
</extension>
</field>
<field name="wxText">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="WXTEXT"/>
</extension>
</field>
<field name="maxTemp">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="MAXTEMP"/>
</extension>
</field>
<field name="minTemp">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="MINTEMP"/>
</extension>
</field>
<field name="prePam">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="PREPAM"/>
</extension>
</field>
<field name="prePpm">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="PREPPM"/>
</extension>
</field>
<field name="windDird">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="WINDDIRD"/>
</extension>
</field>
<field name="windSpeed">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="WINDSPEED"/>
</extension>
</field>
</class>

Sorry, The option is "javax.jdo.option.IgnoreCache : true". With false, I
found the problem.That makes more sense. The reason the second query selects all objects, then,
is that between the first and second query you've modified some objects without
flushing their changes to the database. This means Kodo has to run the query
in-memory on the changed objects in cache when IgnoreCache is set to false. You
can prevent in-memory processing of the query with any of the following options:
1. Set IgnoreCache to true, so Kodo always runs queries against the database and
ignores the changes you've made to objects in the current transaction.
2. Run all your queries for a given transaction before changing your objects.
3. Set kodo.FlushBeforeQueries to true, which will cause Kodo to flush your
changes to the database before a query that would otherwise have to be performed
in memory. Then Kodo can run the query against the DB.

Query Selection View

I'm using the Query Selection View web item on one of my web templates. The issue is related to the Create and Delete command buttons not being displayed even though the Create/Delete - Display Button property has been selected for this control.
Thanks

Did you ever figure this out? I am having the same problem now

Query selection criteria - changing description field..?

Hi Experts,
i want to change description filed in user query selection criteria form..
i have 3 fileds :
docdate - this filed i want to chage 'Document First'
docdate - This filed i want to change 'Document Last'
name -
my problem: screenshot
[Click Here|http://img638.imageshack.us/img638/3466/userqueris.jpg]

The system always asks with the description of the field you refer to with the parameter variable in the select statement.
I sometimes defined a UDT only for getting the appropriate title in the parameter entering window. The table has no data; I used it only for its field names.
(The parameter request can be placed inside a comment and the entered value is used setting an SQL variable like this:
declare @d datetime
/*select t.createdate from ordr t where t.createdate=[%0]*/
set @d=[%0]
This SQL variable can be used later in the real query.)
(But then you loose the possibility to choose from the u2018List of existing valuesu2019

HIER_NODES in Query Selection

Hello Guru's,
I can choose in my Query selection one hier node. On the right side in the selection, i see the technical name,
for example hier with cost center
HIER01/TR32000 Istanbul
on the left side, i see only Istanbul, no technical name. Where can I make changes for this.
THANKS..
SEMI
USER EXIT in Query ???
Edited by: SemihS on Feb 4, 2010 8:45 AM

Thanks Martin,
But know i am facing a problem
This is the i wrote:
WHEN 'ZRANDATE'.
    IF i_step EQ 2.
      READ TABLE i_t_var_range INTO loc_var_range
           WITH KEY vnam = 'ZRANDAYS'.
      IF sy-subrc = 0.
        move loc_var_range to wl_tot_days.
        READ TABLE i_t_var_range INTO loc_var_range
             WITH KEY vnam = 'ZRANDATE'.
        IF sy-subrc = 0.
          wl_date_ini = wl_date_fin - loc_var_range.
          l_s_range-high = wl_date_fin.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'BT'.
          l_s_range-low = wl_date_ini.
          APPEND l_s_range TO e_t_range.
        ENDIF.
      ENDIF.
    ENDIF.
Where zrandate is a variable of 0calday and the zrandays is user entry default value, the range of dates was not created correctly... when i try to debug (rsrt2) iam never be in i_step eq 2. What is wrong here?
Best Regards ans Thanks In Advence
Message was edited by: Juan Carlos Diez de Medina
Message was edited by: Juan Carlos Diez de Medina

Query selection problem

Similar Messages

Maybe you are looking for