Query Stripping: how to filter a value and display the detail

Hi,
We have just upgraded to XI 3.1 SP3.1, and I have done some tests on the query Stripping functionnality. I can see the benefits from a performance point of view if I dragged new characteristics to the report, but I was not able to reproduce one of our key requirements:
The report displays Sales by Manager, the customer is in the webi query panel but not in the report. So far, thanks to the query stripping option, webi only retrieves the Manager information and not the customer.
Now, the user wants to see the sales by customer for a particular manager. If I drag and drop the customer, I have the customers for all the managers, and I now have a performance issue.
I just would like to do as in BEX: Filter and Drill Down.
I know that I can use the Drill Functionnality of webi, but it is a fixed scenario that you have to define in advance in the universe. It has also the inconvenient to drill only to the key or the description of an object (cannot drill down to the key and description of the customer).
Any tip to do a "filter and Drill Down" using the query stripping functionnality?
THank you,
Gabriel

Hi,
Drag from output port of dataservice and select "filter data" option. Then if you select "configure element" for filter operator, you can see the fileds.
The filter conditions for a numeric field is as follows
Equals 100 - 100
Not equals 100 - not 100
greater than 100 - 100..
<= 100 - not 100..
<100 - ..100
I think you got the logic here. the two dots at the end shows greater while dots at the begining shows less than. If the dots are in the middle of two numbers, the filter operator will return values between the two numbers
Regards,
Sooraj

Similar Messages

How to compare two images and display the difference on Front Panel

HI..
I have attached two images.
I want to compare these two images and subtract the differenc from these two images and display the difference(the mouse) on the front panel
Anyone can help me?
Really thanks
Attachments:
IMG_2117.JPG ‏1677 KB
IMG_2118.JPG ‏1650 KB

The missing thing. You have to keep in mind that what you see is not the same as the camera sees.
So when using IMAQ Substract it gives you the difference of the value of every single pixel!
In order to find the mouse as only difference you have to manage that every other pixel value stays the same, e.g. with a proper lightening.
At the other hand you can combine different filters or alogorithms to get the object, e.g. if the object is darker or brighter then everything else in the image you could use a threshold and then use morphologic operations to get the objects size and position.
Christian

Retrieve list items from the textbox text value and display the dropdownlist item for that particular list item

hi,
I have created a custom list in my sharepoint :
List1 name: employeedepartment -
Title empdepartment
A D1
B D2
C D3
List2 name: employeedetails
emptitle empname empdepartment(lookup) --> from the list "employeedepartment"
x Ram D1
y Robert D2
z Rahim D3
My task is to create a custom webpart that will be for searching this employee details by entering emptitle
For this, i have created a visual webpart using visual studio 2010, my webpart will be like this:
emptitle ---> TextBox1 Button1--> Text property : Search
empname---> TextBox2
empdepartment--> DropDownList1
For this, i wrote the code as follows:
protected void Button1_Click(object sender, EventArgs e)
using (SPSite mysite = new SPSite(SPContext.Current.Site.Url))
using (SPWeb myweb = mysite.OpenWeb())
SPList mylist = myweb.Lists["employeedetails"];
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + TextBox1.Text.ToString() + "</Value></Eq></Where>";
SPListItemCollection myitems = mylist.GetItems(query);
if (myitems.Count > 0)
foreach (SPListItem item in myitems)
string a1 = Convert.ToString(item["empname"]);
string a2 = Convert.ToString(item["empdepartment"]);
TextBox2.Text = a1; // displaying properly
//DropDownList3.SelectedIndex = 1;
It is showing the list item in textbox according to the item entered in the textbox1... But I am stuck to show in the dropdown list.
Suppose, if i enter X in textbox and click on search, then dropdownlist need to show D1,
for Y --> D2 and for Z-> D3... like that.
What code do i need to write in the button_click to show this...
Please don't give any links...i just want code in continuation to my code.

Hi,
Since you have got the data you want with the help of SharePoint Object Model, then you can focus on how to populate values and set an option selected in the Drop Down List.
With the retrieved data, you can populate them into the Drop Down List firstly, then set a specific option selected.
Here is a link will show how to populate DropDownList control:
http://www.dotnetfunda.com/articles/show/30/several-ways-to-populate-dropdownlist-controls
Another link about select an item in DropDownList:
http://techbrij.com/select-item-aspdotnet-dropdownlist-programmatically
Best regards
Patrick Liang
TechNet Community Support

Validate the XML tag value and display the Binding data in XDP

Hi,
I am new to Adobe Life Cycle.... and i am working on the following requirement and XML file is enclosed...
1. Need to validate the XML value of <pp> with condition
2. Basing on the value of <pp>, need to display the <ct> values in text field
If i simply bind, it takes the values from top of array and display..
Please suggest how to restrict the binding values basing on the condition.
Thanks
Madhu

Hi Paul,
Thank you for quick respose.
The solution which you have give me not excatly looking for.... working for the solution in alternative methods...
Regards
madhu

How to join two lists and display the results in datasheet view.?

hello,
i have two lists that i would like to join, i know a method that has been described in the link below
http://www.codeproject.com/Articles/194252/How-to-Link-Two-Lists-and-Create-a-Combined-Ciew-i
however, here the data view is only limited to 30 rows and my resultant list is huge. I would like to know if there is a possibility to view the resultant list in a data sheet view ?

I don't believe you can use the OOTB Datasheet view when joining lists. However, you should be able to increase your limit from 30 items to as many as you need (that doesn't trip the threshold set in Central Admin).
Dimitri Ayrapetov (MCSE: SharePoint)

How to open a file and display the complete file path?

In my script, I want to create a dialog that prompts the user to define a few variables for the script. One of those variables is the path to a template file. I want it to work the same way that an upload form works. You click the browse button, the dialog appears so that you can browse for the file and then when you click OK or Open, the full path of the file is displayed in the text box next to it. How do I do this with JavaScript? I got this far and it seems to be working, but the wrong text is being displayed in the text box. Plus: How do I properly restrict the file types to PSD. The code doesn't seem to work, despite the fact that there are no errors reported. Initially the Text box is blank, but After I browse for the file, the text box says: "File". Here is the problem area:
defineVars.STPnl.STBrowse.onClick = function browseST() {
var stbFile = File.openDialog("Select the Single Mugshot Key Template File", "File Types: *.psd, *.PSD");
defineVars.STPnl.STPath.text = stbFile;
Thank you to whoever assists me! :)

Change this:
defineVars.STPnl.STPath.text = stbFile;
To this:
defineVars.STPnl.STPath.text = stbFile.fullName;
The reason is that stbFile is a File object, you need to access its properties in order to get the full path.

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction BP?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How can I remove u0091*u0092 s and display the amount

My coding
T1 TOTAL,,,,,,&REGUD-SWABZ& &REGUD-SWNES&
Doubt :
REGUD-SWNES is the value coming from structure REGUD,
But the value is coming as **********70.250,92
But I need to display as 70.250,92
How can I remove * s and display the amount ?

Not sure why it is coming like that. Is the field length big enough?
I guess, you could try....
translate REGUD-SWNES using '* '.
condense REGUD-SWNES no-gaps.
But again, I have no clue as to why you are seeing this.
Regards,
Rich Heilman

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values should be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

How do we pass values and Internal tables to Sub-routines

how do we pass values and Internal tables to Sub-routines

Hi,
You can use the USING..or TABLES..or Changing addition..
Check this example.
DATA: T_MARA TYPE STANDARD TABLE OF MARA.
PERFORM DISPLAY USING T_MARA.
FORM DISPLAY USING LT_MARA LIKE T_MARA.
DATA: WA TYPE MARA.
LOOP AT LT_MARA INTO WA.
WRITE: / WA-MATNR.
ENDLOOP.
ENDFORM.
Thanks
Naren

Photoshop Elements 8, How to show hue, value and saturation of a specific area of a pickture?

Hello,
Photoshop Elements 8, How to show hue, value and saturation of a specific area of a picture?
How should I select the area? Which tool?
Thank you in advance, Karl

First make sure your Info Palette is visible : menu Window / Info (shortcut F8)
In this palette, click the small icon 'more'
Choose 'Palette Options'
and choose HSB for the second palette readout.

This field contains duplicate values. Remove all duplicate values and try the operation again.

Greetings Everyone,
I am getting the follow up errors: "This field contains duplicate values. Remove all duplicate values and try the operation again."
when I tried to make the field "Claim Number" from the list in site collection library. See the screen below:
1- I selected on the "List" and I clicked on the list name
"Claim Tracking Report"
2- After I clicked on the list name then I went to the ribbon and selected list setting to choose Enforce Unique for the Field Column
"Claim Number"
3- Then I went down and selected
"Yes" to Enforced the Unique for the Field Column "Claim Number".
4- Then after I clicked "Yes" I got the error
"Sorry, something went wrong. This field contains duplicate values. Remove all duplicate values and try the operation again." But I don't have any duplicates values Items, because I had them removed before I tried
to Enforce the field column values to Unique. Can someone help or provide me a suggestions on how I can solve this issue please. Thank you
FYI: I am using a Nintex Workflow

Hope this is a list, how many total items are there?
Please try to open this list as access(link in IE) and run this query in access
SELECT Claim.[Claim Number], Count(*) AS Expr1
FROM Claim
GROUP BY Claim.[Claim Number]
HAVING (((Count(*))>1));
Hope it will show something! if this does not show you dups then better to create a separate list and migrate items after configuring unique column.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How to join two tables and get the supply delivery date next to order?

So there are two tables. One has customer's order no, ordered date, order quantity, available quantity and code of article-
The other table comes form supply side where we have supply order no, article number, ordered qty, and delivery date.
We keep stock so this can not be MOT (made to order) system.
What i need is correct date of arrival to appear next to cusotmers spoecirfic order. The older cusotmers order get's the parts first, second oldest order is next in line etc.
here is any example
customer's order
ref order
art. code
ordered qty
available qty
order date
1809202491
700497
60
0
3.7.2014
1809200528
700497
13
0
20.6.2014
1809198640
700497
7
0
9.6.2014
supply order
supply order
art. code
qty orderd
date of arrival
4501243378
700497
50
4.8.2014
4501263437
700497
20
6.10.2014
There is actually a 3rd "table" and that sort of connects the two and that is stock on hand per art. code.
The main issue is that stock is assigned to purchase orders only when it actually arrives in the warehouse.
A human can easilly connect the dates of when the stock will arrive and quantities with correct customer's order. In this case the firts order will get 50 pcs in August while 10 pcs will remain on backorders. The missing 10 pcs Will arrive in October. The second order will get 10 pcs in october and 3 will remain on backorders with no delivery date. While the third customer orders does not have a delivery date.
So how to make the SAP do this calculations and display the arrival date next to date of customer's order?

I checked the instructions as i do not have access to this part. It seem this is a query. We had issues with queries in the past as not all codes from orders would appear in them. They never found the reason why that is happening.
However, I think the main issue is that the information here is not connected and is separately provided for supply and for sales. So i doubt it can be connected in this query.
edit: as you can see the only connection is stock on hand.
and total number of various items we have is close to 100.000 of various article codes.

Query Stripping not working properly when using variable in the report

We have issue with WEBI document that have query stripping enable.
Once the query stripping enabled there is no data return in the report.
We have investigate on the problem, the query stripping function are notable to retrieve objects that indirectly used in the report
as we have
many variable in the reports.
Ex.
Var1 = object1 + object2
Var2 = Object3 + Object4
Var3 = Var1 + Var2
Var4 = Object1 + Object2 + Object3 + Object4
If we use only Var3 in the report, the object1,2,3,and 4 will not be
retrieve.
But if we are using Var4 in the report, the object1,2,3,and 4 will be
retrieve properly.
Please let me know is it a by-design behavior, if yes please share points on it

Hi Amit,
Thank you for response, however i already had alook on that VIdeo and it tells us about the basic enabling of query stripping.
But my question is when we have a Variable in a report which is dependent on the other two variables it gives me #error so is it by design or not.
Regards,
Abhinav

Query Stripping: how to filter a value and display the detail

Similar Messages

Maybe you are looking for