Query to display alphabets from a given string ....

hi......
how to disply only the alphabets from the given pattern below
“A,C&B$.@D”
tanx

SQL> select regexp_replace('A,C&B$.@D','[^a-z]*','',1,0,'i') from dual;
REGE
ACBD
with tab as
(select 'A,C&B$.@D' col0 from dual union all
select 'a,.cl;:@=y623' from dual
select Col0,
translate(Col0,'Z'||translate(lower(Col0),'Aabcdefghijklemnopqrstuvwxyz','A'),'Z')
from tab
COL0 TRANSLATE(COL0,'Z'||TRANSL
A,C&B$.@D ACBD
a,.cl;:@=y623 acly

Similar Messages

Querying and displaying data from a database

Hi,
The environment I am working in has the EBIZR12 suite installed on the apps server APP1, the EBIZR12 database deployed to server DB1 listening on port 1522 and a MIDTIER database deployed to server DB1 listening on port 1521. I have a custom page that needs to query the data off of MIDTIER and populate a display table. The page I have created emulates that of the Search tutorial. I have an application module that contains a BC4J object and views and these are connecting to the MIDTIER to retrieve data. It has a table that should display queries returned from the MIDTIER database. My question is, are there any limitations with OA framework development and deployment that would NOT make this feasible? if not is there anything else I would need to do either as a pre-requisite or as part of my page construction to make this work, because currently my page table is not being populated and I am not getting any exceptions on the page to indicate the database is either unreachable or the connection configurations are incorrect. Any help is very much appreciated.
regards,

Yes, in case of query region, an executequery was getting called on clicking go button. But now as you just have a table mapped to a VO, you also need to call the executequery explicitly in the page controller's processRequest method.
Your point "I would like to point out that the instructions in those tutorials are not compatible with the newest version of JDEV" is completely wrong. First of all each Jdev has its own set of tutorials reflecting all the changes in that particular version. Secondly, as you are trying to use a particular scenario steps to create something different, you can't expect it to handle all the side off scenarios you can make. Drag and drop UI won't get you more than a few basic screens. Read more and you will understand the working of framework.
--Shiv

Need to ommit the short form letter from the given string

HI,
     I need to ommit the Short form letter from column data.
EX :
CREATE table #testdata
(id int identity(1,1),cust_address varchar(max))
insert into #testdata (cust_address)
select 'first street 5N, North'
union
select 'second street W, west'
union
select 'roja street 5S, South'
union
select 'temple street E, East'
union
select 'first street, Northwest, NW'
union
select 'first street, Southwest, SW'
select * from #testdata
actutal out put:
id cust_address
1 first street 5N, North
2 first street, Northwest, NW
3 first street, Southwest, SW
4 roja street 5S, South
5 second street W, west
6 temple street E, East
Need to ommit the Short form letter from this output,
condition , 1) the short form letter should have space in front of the letter ex : first street (space)N, North
               so the output should be "first street, North" like that for other words like "first street, Southwest, SW" should be "first street, Southwest"
             2) the short form letter should not combine with any other letter ex : first street 5N, North
                 here we dont need to do anything.
Required Out put :
id cust_address
1 first street 5N, North
2 first street, Northwest
3 first street, Southwest
4 roja street 5S, South
5 second street, west
6 temple street, East
Nandha Kumar

CREATE FUNCTION [dbo].[SplitString]
@str VARCHAR(MAX)
RETURNS @ret TABLE (token VARCHAR(MAX))
AS
BEGIN
DECLARE @x XML
SET @x = '<t>' + REPLACE(@str, ',', '</t><t>') + '</t>'
INSERT INTO @ret
SELECT x.i.value('.', 'VARCHAR(MAX)') AS token
FROM @x.nodes('//t') x(i)
RETURN
END
with cte
as
select *
from #testdata
CROSS APPLY (SELECT * FROM [dbo].[SplitString](cust_address)) AS der
) ,cte1
as
select *,
case when UPPER(token)=token COLLATE Latin1_General_BIN
then '' else token end as d
from cte
) ,CTE2
AS
(SELECT *,case when RIGHT(UPPER(D),1)=RIGHT(D,1) COLLATE Latin1_General_BIN
then replace(D,RIGHT(UPPER(D),1),'') else token end d1 FROM CTE1
SELECT m1.id,
( SELECT m2.D1 + ','
FROM cte2 m2
WHERE m2.id = m1.id
ORDER BY id
FOR XML PATH('') ) AS token
FROM cte2 m1
GROUP BY m1.id
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Importing Query & Display Templates from 11.5 to 12.1

Hi,
I am importing a project created in 11.5 into 12.1. The Query and Display templates are imported as .xml files. Can somebody explain how to properly import the existing Xacute, iGrid etc. query and display templates from 11.5 to 12.1? Is the migration tool a must?
Regards,
Chanti.

Chanti,
While you managed to get this to work, the migration tool should be used to get 11.5 project content into 12.0 / 12.1. For some of the objects your risk for problems will go up significantly, since the migration tool provides all sorts of object level modifications to catch up with changes, etc. that a straight Workbench import is not expected to do.
Regards,
Jeremy

Removing segment from the concatenated String...

Hi,
please any one tell me that what will be the query to separate segments from the concatenated string.
For instance, if the segment value passed is
‘000-000-abcd-10001-post-000-21000’, then the following output should get displayed.
000
000
abcd
10001
post
000
21000
Thanks in advanced

test it:
with
test_table as
      select '000-000-abcd-10001-post-000-21000' as str from dual union all
      select '111-222-cdef-20002-test' as str from dual
select v.str,
       substr( my_str,
               instr(my_str,'-',1, rn) + 1,
               instr(my_str,'-',1, rn + 1) - instr(my_str,'-',1, rn) - 1
             ) as new_str
from (
         select '-'||ltrim(rtrim(str,'-'),'-')||'-' as my_str,
                str
             from test_table
       ) v,
         select level as rn
             from dual,
                    select max(length(str) - length(replace(str,'-'))) max_len from test_table
          connect by level <= max_len + 1
        ) pivot
where (length(str) - length(replace(str,'-'))) + 1 >= rn
order by str, rn
Query finished, retrieving results...
               STR                   NEW_STR
000-000-abcd-10001-post-000-21000    000
000-000-abcd-10001-post-000-21000    000
000-000-abcd-10001-post-000-21000    abcd
000-000-abcd-10001-post-000-21000    10001
000-000-abcd-10001-post-000-21000    post
000-000-abcd-10001-post-000-21000    000
000-000-abcd-10001-post-000-21000    21000
111-222-cdef-20002-test              111
111-222-cdef-20002-test              222
111-222-cdef-20002-test              cdef
111-222-cdef-20002-test              20002
111-222-cdef-20002-test              test
12 row(s) retrieved

SQL Query to search all the tables for a given string

Hi all,
This is concerning a query to search each and every table/column for a given string.
I came across a similar post (Re: question about searching 600 tables and this query seems to be inline with my requirements:
select table_name,
column_name,
:search_string search_string,
result
from cols,
xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
columns result varchar2(10) path '.'
where table_name in ('MY_TABLE')
However, I am getting the following error:
ORA-24451: OCIKCallPushTrusted, Maximum call depth exceeded
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit and could you please let me know the best possible way to accomplish this task?
Thanks.
Edited by: itech.quest on Sep 19, 2010 8:30 AM

Hi Tamir,
Thanks so far. I am yet to make the crucial breakthrough as far my application goes. Are you talking about the EUL5_QPP_STATS table? I tried retrieving worksheets even from that table also with the following query
SELECT DISTINCT Eul5QppStats.QS_DOC_NAME,Eul5QppStats.QS_DOC_DETAILS
FROM EUL5_QPP_STATS Eul5QppStats,EUL5_DOCUMENTS Eul5Documents
WHERE Eul5QppStats.QS_DOC_NAME = Eul5Documents.DOC_NAME
However, the worksheet data retrieved by Discoverer Oracle's product is not matching my dataset for every workbook. Please suggest.
Reg
Thomas

Data From Query not Displayed on Public Page

Hi all,
I just created a page which has a dynamic portlet that runs a query to display some data. Now I recently made this page public which means that anyone can basically access this page from the outside and not have to login. However, the data does not seem to come up after I access this page on a browser even though the banner comes up fine!! I made the table that the dynamic portlet accesses public. Is there something that I may be missing here? THanks.

Well I went to the grant access tab and there is no make portlet accessable to public. The only place to make a component accessible to public is when your editing a page. The only options when you click on the Grant Access Tab is 1) Publish To Portal and 2) Inherit Previleges From Application.

Read / Write Security from Query and Display Templates

When you assign a role to the READ access of the Security tab of either the Query or Display template, this means the user can only view the report on the screen.
My question is...
When you assign a role to the WRITE access of the Security tab of either the Query or Display template, DOES this means the user can enter information on the screen? Or is there another meaning to the WRITE section?

Please look at the bottom of this page:
<a href="http://help.sap.com/saphelp_xmii115/helpdata/en/Getting_Started/Template_Editor/Query_Editor.htm">http://help.sap.com/saphelp_xmii115/helpdata/en/Getting_Started/Template_Editor/Query_Editor.htm</a>
Writer Roles is a design time template editor permission to make physical changes to the template itself.
Regards,
Jeremy Good

Query for Hierarchy Path from child to parent for a given child key by user

CREATE TABLE EMP_ID
HEAD_ID NUMBER(4),
TAIL_ID NUMBER(4),
NAME     VARCHAR2(20 )
Insert into EMP_ID Values (1011, 1008, 'C11');
Insert into EMP_ID Values (1008, 1003, 'C8');
Insert into EMP_ID Values (1012, 1003, 'C12');
Insert into EMP_ID Values (1020, 1003, 'C20');
Insert into EMP_ID Values (1025, 1003, 'C25');
Insert into EMP_ID Values (1015, 1012, 'C15');
Insert into EMP_ID Values (1012, 1005, 'C12');
Insert into EMP_ID Values (1005, 1017, 'C5');
COMMIT;now my requirement is like this
if choose the head_id as 1012 and tail_id as 1017
it should traverse the path form tail to head and print the path as shown below
c12/c5/c17/c12such that it shows that tail_id has been used as head_id in the same hierarchy path previously.
here the hierarchy is as shown below
1015
      1012
            1005
                1017

Rede,
Is this what you want?
CREATE TABLE EMP_ID
HEAD_ID NUMBER(4),
TAIL_ID NUMBER(4),
NAME     VARCHAR2(20 )
Insert into EMP_ID Values (1011, 1008, 'C11');
Insert into EMP_ID Values (1008, 1003, 'C8');
Insert into EMP_ID Values (1012, 1003, 'C12');
Insert into EMP_ID Values (1020, 1003, 'C20');
Insert into EMP_ID Values (1025, 1003, 'C25');
Insert into EMP_ID Values (1015, 1012, 'C15');
Insert into EMP_ID Values (1012, 1005, 'C12');
Insert into EMP_ID Values (1005, 1017, 'C5');
Insert into EMP_ID Values (1017, 1012, 'C17'); ---- ==== This was missing in your setup example
COMMIT;QUERY and OUTPUT
SELECT *
FROM (
select
connect_by_iscycle as CYC
,dt.head_id
,dt.tail_id
,sys_connect_by_path
                  ( dt.name
                  ) AS EMP_PATH
from   emp_id dt
start with dt.head_id = 1012
connect by NOCYCLE dt.head_id= prior dt.tail_id)
CYC     HEAD_ID     TAIL_ID     EMP_PATH
0     1012     1003     /C12
0     1012     1005     /C12
0     1005     1017     /C12/C5
1     1017     1012     /C12/C5/C17
0     1012     1003     /C12/C5/C17/C12If you just want the PATH printed
SELECT *
FROM (
select
max(sys_connect_by_path
                  ( dt.name
                  )) AS EMP_PATH
from   emp_id dt
start with dt.head_id = 1012
connect by NOCYCLE dt.head_id= prior dt.tail_id)
/C12/C5/C17/C12vr,
Sudhakar B.

How to display data from Database individually??? Anyone can help ?

HI,
i i had select a row of data from database using ,
/* Query * From Table RESOURCEORDER where po = selected no and project = selected project */
     public ResultSet getAllData() throws SQLException
     getConnection();
     Statement stmt = conn.createStatement();
     ResultSet rs = stmt.executeQuery("SELECT * FROM RESOURCEORDER WHERE PROJECT = '" + getSelProject() + "' and PURCHASEORDERNO = '" + getPo() + "'" );
     return rs;
After that , how do i display the data individually ?
Eg select data is ('projectA','7891203-1', '10-4-2005','lcd',2000,'121-45217-8','electrical','pending','donwong')
i want to display them individually, like this in a page
Projectname: /* should display the Project A*/
P.O no:
Date:
Order:
Cost:
Acc no:
Type:
status:
Orderedby:
Can anyone help ? cos i'm new to JSP ......Thanks alot!!!!!
Regards,
khim

I assume PO being a unique key, will always return 1 row from db.
public String[] getAllData() throws Exception
getConnection();
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM RESOURCEORDER WHERE PROJECT = '" + getSelProject() + "' and PURCHASEORDERNO = '" + getPo() + "'" );
String [] returnValue = new String[9];
while(rs.next())
returnValue[1] = rs.getString("colname");
returnValue[2] = rs.getString("colname");
///and so on
return returnValue;
}Once you get that you could individually view it by setting a loop to run through the returned array.
Hope it helps

Sub-Menus are displaying away from their parent Menu for first time.

Hi All,
I have a problem with sub-menus display location. In my application, I have a JPopupMenu to which several sub-menus (*JMenu*) are added. All the JMenuItems inside JMenu are having an Icon (Image) along with menu item title. I am providing a facility to change the font size of Menu Item names as well as the ImageIcon size dynamically through a dialog box. When the size is changed to larger value than the existing, the menus as well as submenus are getting displayed correctly. But when I change the size of ImageIcon and the font to smaller value than the existing one, then the submenus are getting displayed away from their parent menu for the first time. The location of sub menu display is matching with the location when their size was larger. This problem appears only for the first display of sub menus after their sizes are changed. For the successive display, the locating is resetting automatically to correct location.
So can anybody help me out about how to display submenus at correct location irrespective of font and image size changes for the first time also? Is there any event which gets fired when we change the font size or ImageIcon sizes? Is there any specific method to refresh the menu sizes if any of such properties (such as font size, ImageIcon size) are changed?
If you need any additional information, feel free to ask.

Below is the sample code for the query I placed. Steps to reproduce the problem are:
1. Click on "Increase Font" button.
2. Generate the popup at the right side corner of the screen (using right mouse click) such that the sub menu of edit should appear at left side of "Edit" option.
3. Click on "Decrease Font" button.
4. Generate the popup at the right side corner of the screen (using right mouse click) such that the sub menu of edit should appear at left side of "Edit" option.
You will see that sub menu of edit menu is displayed away from the popup for the first time. The sub menu location matches with previous location when its font size was larger. Location resets automatically for the next successive displays.
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.Font;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JMenu;
import javax.swing.JMenuItem;
import javax.swing.JPanel;
import javax.swing.JPopupMenu;
public class JPopupDemo implements ActionListener {
public static Font newFont=new Font("Times New Roman", Font.BOLD,24);
JFrame frame = null;
JPopupMenu popupMenu = null;
JMenuItem fileMenu = null;
JMenu editMenu = null;
JMenuItem cutMenuItem = null;
JMenuItem copyMenuItem = null;
JMenuItem pasteMenuItem = null;
JMenuItem findMenuItem = null;
    JPopupDemo(){
    frame = new JFrame("Popup Example");
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    popupMenu = new JPopupMenu();
    fileMenu = new JMenuItem("File");
    editMenu = new JMenu("Edit");
    cutMenuItem = new JMenuItem("Cut");
    editMenu.add(cutMenuItem);
    copyMenuItem = new JMenuItem("Copy");
    editMenu.add(copyMenuItem);
    pasteMenuItem = new JMenuItem("Paste");
    pasteMenuItem.setEnabled(false);
    editMenu.add(pasteMenuItem);
    editMenu.addSeparator();
    findMenuItem = new JMenuItem("Find");
    editMenu.add(findMenuItem);
    popupMenu.add(fileMenu);
    popupMenu.add(editMenu);
    MouseListener mouseListener = new JPopupMenuShower(popupMenu);
    frame.addMouseListener(mouseListener);
    //frame.setSize(350, 250);
    Toolkit toolkit = Toolkit.getDefaultToolkit();
    Dimension dim = toolkit.getScreenSize();
    frame.setSize(dim.width,dim.height-100);
    JButton incrButton = new JButton("Increase Size");
    incrButton.setActionCommand("IncreaseSize");
    incrButton.addActionListener(this);
    JButton decrButton = new JButton("Decrease Size");
    decrButton.setActionCommand("DecreaseSize");
    decrButton.addActionListener(this);
    Container cp = frame.getContentPane();
    cp.setLayout(new BorderLayout());
    JPanel jp = new JPanel();
    jp.add(incrButton);
    jp.add(decrButton);
    cp.add(jp,BorderLayout.SOUTH);
    frame.setVisible(true);
public static void main(String args[]) {
     JPopupDemo demo = new JPopupDemo();
public void actionPerformed(ActionEvent ae)
        if (ae.getActionCommand().equals("IncreaseSize"))
               newFont = new Font("Times New Roman", Font.BOLD,48);
               setNewFont();
          else if (ae.getActionCommand().equals("DecreaseSize"))
               newFont = new Font("Times New Roman", Font.BOLD,12);
               setNewFont();
   public void setNewFont()
        popupMenu.setFont(newFont);
        fileMenu.setFont(newFont);
        editMenu.setFont(newFont);
        cutMenuItem.setFont(newFont);
        copyMenuItem.setFont(newFont);
        pasteMenuItem.setFont(newFont);
        findMenuItem.setFont(newFont);
class JPopupMenuShower extends MouseAdapter {
private JPopupMenu popup;
public JPopupMenuShower(JPopupMenu popup) {
    this.popup = popup;
private void showIfPopupTrigger(MouseEvent mouseEvent) {
    if (popup.isPopupTrigger(mouseEvent)) {
      popup.show(mouseEvent.getComponent(), mouseEvent.getX(), mouseEvent
          .getY());
public void mousePressed(MouseEvent mouseEvent) {
    showIfPopupTrigger(mouseEvent);
public void mouseReleased(MouseEvent mouseEvent) {
    showIfPopupTrigger(mouseEvent);
}Edited by: VPKVL on Aug 4, 2008 1:18 AM

JSP, DataWebBean: How to dynamically set the where clause of query and display record

Hi,
I am reposting this question as per suggestions made by Mr. Dwight.
I have used ViewCurrentRecord web bean to display records from EMP table. I have to use the Dept_Id_FK from the current
record of the EMP table to display corresponding records of Dept table. I have a view object called DeptView in my Business
Components which selects all the records from the Dept table.
How do I get the value of Dept_Id_FK and use it to display the required records of the Dept table?
I tried to declare a variable and get the value of Dept_Id_FK but it did not work. My code is as follows:
<%! String m_DeptId = null; %>
<jsp:useBean id="RowViewer" class="oracle.jbo.html.databeans.ViewCurrentRecord" scope="request">
<%
RowViewer.initialize(pageContext, "EMPApp_EMP_EMPAppModule.EMPView1");
RowViewer.setReleaseApplicationResources(false);
RowViewer.getRowSet().next();
m_DeptId = (String)RowViewer.getRowSet().getCurrentRow().getAttribute("DeptIdFk");
%>
</jsp:useBean>
Thanks.
null

First of all, Thank you very much for making use of the new topic format. It is very much appreciated.
As for your question, I think there are several different ways to accomplish what I think you want to do.
1. Create a view object that includes both Emp and Dept entities and join them there. In this case, your query would look something like this:
Select e.empno,e.name,...,d.dname,d.loc from emp e, dept d
where e.deptno = d.deptno
You should be able to create a JSP off of this view object that contains both the employee and department information. In this case, BC4J takes care of the foreign key to primary key coordination.
2. In order to set a dynamic where clause for a view, you need to do the following in your usebean tag:
rsn.initialize(application,session, request,response,out,"DeptView");
rsn.getRowSet().getViewObject().setWhereClause("deptno=" | | m_DeptId);
rsn.getRowSet().getViewObject().executeQuery();
rsn.getRowSet().first();
You will need to do this in a separate usebean tag from the EmpView, since the usebean can only initialize one view object.
In other words, you would have your ViewCurrentRecord bean tag for the EmpView, then a separate one for the DeptView where you use the above code to set the where clause to display just the information for the department you want.
Another option, but one I'm not sure would work as well, is to create a master-detail JSP to do this for you. Usually a master-detail is a one-to-many (one department to many employees). Your request appears to be the reverse, but might still be doable using the same mechanism.
You set up relationships between views in your BC4J project using View Links. If you used the BC4J project wizard and created default views, some of these links may have been created for you. They are created when BC4J detects a foreign key to primary key relationship in the database.
You can create your own View Links using the View Link wizard. Select your BC4J project node and choose Create View Link... from the context menu. You will be asked to select a source view (Emp), and a target view (Dept), then select the attribute in each view that related the two of them (deptno).
Next, you need to reflect this new relationship setting in your application module. Select your app module and choose Edit from the context menu. On the data model page, select the EmpView node in the Selected list. Now select the DeptView node in the available list and shuttle it over. You should see DeptView1 via yourlink appear indented under the EmpView node. Save and rebuild your BC4J project to reflect the changes.
In your JSP project, you can now have the wizard create a master-detail form for you based on DeptView1.
Let me know if the above answers your question, or if I have misunderstood what it is you wanted to do.
null

Why is Mail 6.2 not displaying messages from my Exchange account?

Greetings,
I have a new 13" MacBook Air running Mountain Lion and I'm noticing that most of the time my Mail inbox is not displaying messages from my work Exchange account; however, it does display messages correctly for my Gmail account. I've included a screen shot of what I'm experiencing.
Any ideas?
Thanks,
Garry

I have the same problem, as does a coworker. It happens, for instance, if I click on another mailbox (such as Junk) then go back to the inbox. Our company uses Exchange. Quitting mail usually fixes it. A rebuild of the mailbox will too. Only happens on my Mac at work, not my Mac at home (connected via VPN).
Another problem I have is with mail not syncing. Mail I have deleted from another device (such as on my Mac at home or my iPad) does not get deleted from my inbox at work. Sometimes they'll go away when I click on them. Other times they won't go away and the only way to delete them is to rebuild the mailbox.
And lately I have had problems with attachments. Attachments sent from my Exchange account at work show up as .eml attachments in my iCloud account and mime attachments on my iPad or as a string of characters (20-30), not as an attachment. This happens whether sent from home or work.
I have our IT department looking into the third problem (which is the most vital one for me). I'll report the other two annoying problems and see what they can figure out.

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

How do you have more than one parameterized Query to display "All"?

hi,
I am using:
Jdeveloper 9.0.5.2
Oracle Database 9.2.0.1
Toplink
Struts
I have been able to create a parameterized query to display an html read only table.
I populated a dropdown list with values from the database
and the values I select will be the parameters to my read only table.
The drop down list is on the same page as the read only table.
I have all this working but I also need to hard code an option in the Drop down to "All"
to represent all values of this parameter.
I was able to trick the jsp page using two read only tables
and displaying the one with the parameterized query when a parameter other than "All" was chosen
and then display the other only when "All" was chosen.
This does not seem the best way to do it.
What if I had more than one parameter and I wanted to show "All"
the values of one and a certain values for another.
I would then need at least 4 read only tables.
How do I accomplish this in an easier way?
Thanks in advance.

I am not exactly sure what you are asking... Are you having trouble with TopLink, or another part of your application?
Peter Krogh

Query to display alphabets from a given string ....

Similar Messages

Maybe you are looking for