Query to retrieve past 1 hour data
Hi,
Pls tell me how to retrieve past 1 hour data from a table?
Thanks.
Maybe this will do ?
SQL> insert into emp (empno, ename, sal) values (6789,'ROB',1000)
2 /
1 rij is aangemaakt.
SQL> select * from emp minus select * from emp as of timestamp sysdate - 1/24
2 /
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
6789 ROB 1000
1 rij is geselecteerd.Regards,
Rob.
Similar Messages
-
Query and retrieval of SAP table data
Hi,
Within PI Is it possible to use a select query on an ECC table and retrieve the relevant data. The data will then need to be mapped to the output.
Can this be achieved through an RFC call?
ThanksHi,
You can use RFC lookup and map the output to target field.
view this article for step by step process...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40b64ca6-b1e3-2b10-4c9b-c48234ccea35
Hope this helps.... -
ERROR MESSAGE WHEN DOING SIMPLE QUERY TO RETRIEVE LARGE AMOUNT OF DATA
Hello,
Am querying my database(mysql) and displaying my data in a
DataGrid (Note that am using Flex 2.0)
It works fine when the amount of data populating the grid is
not much. But when I have large amount of data I get the following
error message and the grid is not populated.
ERROR 1
faultCode:Server.Acknowledge.Failed
faultString:'Didn't receive an acknowledge message'
faultDetail: 'Was expecting
mx.messaging.messages.AcknowledgeMessage, but receive Null'
ERROR 2
faultCode:Client.Error.DeliveryInDoubt
faultString:'Channel disconnected'
faultDetail: 'Channel disconnected before and acknowledge was
received'
Note that my datagrid is populated when I run the query on my
Server but does not works on my client pcs.
Your help would br greatly appreciated here.
Awaiting a reply.
RegardsHello,
Am using remote object services.
USing component (ColdFusion as destination). -
Query to retrieve the number of transactions done in every 1 hour for last
Hi,
Could anyone help in writing a query to retrieve the number of transactions done in every 1 hour for last month.
Case:
I/P
Cases Timestamp1
case1 01-01-2008 00:00:01
case2 01-01-2008 00:01:01
case3 01-01-2008 01:00:01
case1 01-01-2008 01:02:01
case4 01-01-2008 01:10:01
case5 02-01-2008 02:00:01
case6 02-01-2008 02:10:01
case7 02-01-2008 23:00:01
case.. 31-01-2008 24:00:00
O/P
from time to_time cases
01-01-2008 00:00:00 01-01-2008 01:00:00 2
01-01-2008 01:00:01 01-01-2008 02:00:00 3
etc
Any help really appreciatedWe can do this using analytical functions
Following is what I did:
create table timestamp1 (ts date)
select *from timestamp1
30/10/2008 15:41:13
30/10/2008 15:41:05
30/10/2008 15:40:03
30/10/2008 14:58:26
30/10/2008 14:29:45
30/10/2008 13:17:48
30/10/2008 08:29:50
30/10/2008 06:05:51
30/10/2008 03:41:52
30/10/2008 02:29:54
select distinct to_char(ts,'hh24') frmhrs,
to_char(ts,'hh24')+1 tohrs, count(ts) OVER (order by to_number(to_char(ts,'hh24')) RANGE (1/24) PRECEDING )
from timestamp1
where trunc(ts)=trunc(sysdate) -- I added this just to make sure I get for today's data
order by frmhrs
FRMHRS TOHRS CNT
02 3 1
03 4 1
06 7 1
08 9 1
13 14 1
14 15 2
15 16 3
You can customizeas per ur need. -
Web Analysis Error -- Error while executing query and retrieving data
Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveWHi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P -
Query to retrieve Identical names, same birth dates
I have a table with these fields:
table1 definition
(ID varchar2(10),
name1 varchar2(50),
name2 varchar2(50),
name3 varchar2(50),
name4 varchar2(50),
birthdt date)
I need to write a query to retrieve the id's of those people that have identical first and last names AND were born on the same date. note that name is composed of four parts.
I am trying this query
(select id from table1 group by name1,name4,birthdt having count(name1)>1 and count(name4)>1 and count(birthdt)>1). I am not getting correct results.
Any help appreciated.
Ammar¿...Doh...how could I miss that? smacks forehead
Thanks ( for the N-th time ;) ) for setting straight, Solomon.
Guess I wasn't completely recovered from yesterday ;)
However, the basic approach wasn't too bad ;)
But ofcourse the 'select *' should be 'select id'
Using testdata:
SQL> with table1 as ( -- generating sample data as I should have done in the first place:
2 select 1 id, 'John' name1, 'James' name2, 'Joe' name3, 'Jameson' name4, to_date('15-05-1989','dd-mm-yyyy') birthdt from dual union all
3 select 2 id, 'John' name1, 'James' name2, 'Joe' name3, 'Jackson' name4, to_date('15-05-1989','dd-mm-yyyy') birthdt from dual union all
4 select 3 id, 'John' name1, 'James' name2, 'Joe' name3, 'Jameson' name4, to_date('25-05-1989','dd-mm-yyyy') birthdt from dual union all
5 select 4 id, 'Zlad' name1, 'James' name2, 'Joe' name3, 'Jameson' name4, to_date('15-05-1989','dd-mm-yyyy') birthdt from dual union all
6 select 5 id, 'John' name1, 'James' name2, 'Joe' name3, 'Jameson' name4, to_date('15-05-1989','dd-mm-yyyy') birthdt from dual
7 )
8 --
9 -- actual query
10 --
11 select id
12 from ( select id
13 , name1
14 , name2
15 , name3
16 , name4
17 , birthdt
18 , count(*) over (partition by name1, name2, name3, name4, birthdt) recs
19 from table1
20 )
21 where recs > 1;
ID
1
5 -
Query That Retrieves New Customers & Leads By Date
Hello All --
We would like to create a Query that retrieves new customers and leads based on the date (or date range) they are entered into SAP.
Can we create a UDF named STDATE --- Start Date -- and have a Query that allows us to select based on this date range?
Start dates are entered in this format --- YYYYMMDD.
Then, the Query would pull out:
Contact...Company...Bill To Address...Bill To City...Bill To State....Bill To Zip...Phone...Email
Is this possible to do?
Thanks!
MikeHi Mike ,
You can add some other field as you like .This report will give you combination of both customer and lead .
I couldn't understand the purpose ,but I like previous query as i have flexibilty to choose customer or vendor .
SELECT T0.[CreateDate], T0.[CntctPrsn], T0.[CardName], T0.[Address], T0.[City], T0.[E_Mail], T0.[ZipCode], T0.[Phone1] FROM OCRD T0 WHERE T0.[CardType] in ('C','L') and T0.[CreateDate]=[%0]
If you agree with me ,you can use this query
SELECT T0.[CreateDate], T0.[CntctPrsn], T0.[CardName], T0.[Address], T0.[City], T0.[E_Mail], T0.[ZipCode], T0.[Phone1] FROM OCRD T0 WHERE T0.[CardType] =[%0] or T0.[Cardtype]=[%1] and
T0.[CreateDate]=[%2]
Regarding the date issue , since you are entering paramenter it will match with the date you are looking for .If you have more than one customer created on same day , you willreceive multiple client .
Thank you
Bishal -
Need efficient SQL query to retrieve data for MLM website
Table cd_members
MemberID LeftID RightID
1 2 3
2 4 5
3 6 7
4 8 -
5 - -
6 - -
7 - -
8 9 10
9 - -
10 - -
i want to execute a query to retrieve downline of a member say MemberID 2
o/p should be Records with MemberID 4,5,8,9,10
i am using this query but don't know how to start from MembeID=2
select a.memberid, a.tradingid, a.refid, a.parentid, a.node, a.leftid, a.rightid, b.memberid from cd_members a, cd_members b
where (a.leftid=b.memberid or a.rightid=b.memberid)Again, assuming that the number of levels is known, you can just do N self joins (note that I intentionally go one level further than necessary in this case
SQL> ed
Wrote file afiedt.buf
1 with t
2 as
3 (
4 select 1 person, 2 left, 3 right from dual union all
5 select 2, 4, 5 from dual union all
6 select 3, 6, 7 from dual union all
7 select 4, 8, null from dual union all
8 select 5, null, null from dual union all
9 select 6, null, null from dual union all
10 select 7, null, null from dual union all
11 select 8, 9, 10 from dual union all
12 select 9, null, null from dual union all
13 select 10, null, null from dual
14 )
15 select t1.left, t1.right, t2.left, t2.right, t3.left, t3.right, t4.left, t
4.right
16 from t t1,
17 t t2,
18 t t3,
19 t t4
20 where t1.person = 2
21 and t1.left = t2.person(+)
22 and t2.left = t3.person(+)
23* and t3.left = t4.person(+)
SQL> /
LEFT RIGHT LEFT RIGHT LEFT RIGHT LEFT
RIGHT
4 5 8 9 10Justin -
Query for Software Updates Reports Install Date for only Some of the Installed Updates
We use the following query to retrieve a list of software updates for a specific collection and software update group. There are many cases where the installation status of a software update is 'installed' but there is no corresponding 'install
date'. Can anyone tell me why?
declare @AuthListLocalID as int
declare @CollID as varchar(8)
Select @CollID=CollectionID
from v_Collection
WHERE CollectionID='ZSV0000A'
select @AuthListLocalID=CI_ID from v_AuthListInfo
where CI_UniqueID='ScopeId_EAD5EB80-CC39-4EA2-B08F-A45BB84F1D76/AuthList_4DEAD110-5740-495E-8BD8-467A55C50A0C'
select
rs.Name0 as ServerName,
catinfo.CategoryInstanceName as Vendor,
catinfo2.CategoryInstanceName as UpdateClassification,
ui.BulletinID as BulletinID,
ui.ArticleID as ArticleID,
Case ui.Severity WHEN 10 THEN 'Critical' WHEN 8 THEN 'Important' ELSE LTRIM(ui.Severity) END as Rating,
ui.Title as Title,
Targeted=(case when ctm.ResourceID is not null then '*' else '' end),
Installed=(case when css.Status=3 then '*' else '' end),
IsRequired=(case when css.Status=2 then '*' else '' end),
Deadline=cdl.Deadline,
CAST(CASE IsNull(AddRem.InstallDate0,CAST('1/1/1900' as smalldatetime)) WHEN CAST('1/1/1900' as smalldatetime) THEN AddRem64.InstallDate0 ELSE AddRem.InstallDate0 END as Date) as 'Install Date',
ui.InfoURL as InformationURL
from v_UpdateComplianceStatus css
inner join v_UpdateInfo ui on ui.CI_ID=css.CI_ID
inner join v_CIRelation cir
on ui.CI_ID=css.CI_ID and cir.ToCIID = ui.CI_ID -- add this
inner join v_CICategories_All catall on catall.CI_ID=ui.CI_ID
inner join v_CategoryInfo catinfo on catall.CategoryInstance_UniqueID = catinfo.CategoryInstance_UniqueID and catinfo.CategoryTypeName='Company'
inner join v_CICategories_All catall2 on catall2.CI_ID=ui.CI_ID
inner join v_CategoryInfo catinfo2 on catall2.CategoryInstance_UniqueID = catinfo2.CategoryInstance_UniqueID
and catinfo2.CategoryTypeName='UpdateClassification'
left outer join v_CITargetedMachines ctm on ctm.CI_ID=css.CI_ID
and ctm.ResourceID = css.ResourceID
left outer join v_GS_ADD_REMOVE_PROGRAMS AddRem on css.ResourceID = AddRem.ResourceID and ui.Title = AddRem.DisplayName0
left outer join v_GS_ADD_REMOVE_PROGRAMS_64 AddRem64 on css.ResourceID = AddRem64.ResourceID and ui.Title = AddRem64.DisplayName0
left outer join (select atc.CI_ID
,CreationTime=min(a.CreationTime)
,ExpirationTime=min(a.ExpirationTime)
,StartTime=min(a.StartTime)
,EnforcementDeadLine=min(a.EnforcementDeadLine)
,LastModificationTime=min(a.LastModificationTime)
,Deadline=min(a.EnforcementDeadline)
from v_CIAssignment a
inner join v_CIAssignmentToCI atc on atc.AssignmentID=a.AssignmentID
group by atc.CI_ID) cdl
on cdl.CI_ID=css.CI_ID
left outer join v_R_System rs ON css.ResourceID=rs.ResourceID
where css.ResourceID in (
Select vc.ResourceID
FROM v_FullCollectionMembership vc
WHERE vc.CollectionID=@CollID)
and cir.FromCIID=@AuthListLocalID
and cir.RelationType=1
order by
catinfo.CategoryInstanceName
, catinfo2.CategoryInstanceName
, ui.ArticleIDHi Mate,
Its really difficult to do get the installed date of the patches as there is no table available in SCCM DB to pull this info i had a requirement in the past but i was unable to do had done it via work around.
This can be done after editing of sms_def.mof file or else using the power-shell script in windows server 2008 where the powershell is a feature by default.
H/W inventory:
For the 2000 servers this has to be installed but if we enable this its mentioned it may utilize upto 100 % of the Memory during the h/w inventory you can check that in your SMS_DEF.MOF -
QuickFixEngineering you can see the warning.uickFixEngineering
http://support.microsoft.com/kb/279225/en-us
Powershell script:
http://msmvps.com/blogs/richardsiddaway/archive/2011/10/23/1760058.aspx
the warning for the quick fix engineering is not there on 2012 but there on 2007 hope the info help you to achieve your output.
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights -
Can I use Reports Server Queue PL/SQL Table API to retrieve past jobs ?
Hi all,
Can I use Reports Server Queue PL/SQL Table API to retrieve past jobs using WEB.SHOW_DOCUMENT from Forms ?
I have reviewed note 72531.1 about using this feature and wonder if i can use this metadata to retrieve past jobs submitted by a user.
The idea would be to have a form module that can filter data from the rw_server_queue table, say, base on user running the form, and be able to retrieve past jobs from Report Server Queue. For this, one would query this table and use WEB.SHOW_DOCUMENT.
Is this possible ...?
Regards, Luis ...!Based on that metalink note and the code in the script rw_server.sql, I am pretty sure that by querying the table you would be able accomplish what you want... I have not tested it myself... but it looks that it will work... you have the jobid available from the queue, so you can use web.show_document to retrieve the output previously generated...
ref:
-- Constants for p_status_code and status_code in rw_server_queue table (same as zrcct_jstype)
UNKNOWN CONSTANT NUMBER(2) := 0; -- no such job
ENQUEUED CONSTANT NUMBER(2) := 1; -- job is waiting in queue
OPENING CONSTANT NUMBER(2) := 2; -- opening report
RUNNING CONSTANT NUMBER(2) := 3; -- running report
FINISHED CONSTANT NUMBER(2) := 4; -- job has finished
TERMINATED_W_ERR CONSTANT NUMBER(2) := 5; -- job has terminated with -
Running Mavericks OS on MacBookPro...had some hard crashes past 24 hours...forced reboots....now can't print anything from Office or Firefox. Both crash during print dialog - changing printer causes instand crash. My system printed fine before the crashes yesterday. I can print from the Stickies app and safari printed fine. I did a full Shutdown/restart and that didn't work. Ideas on how to get PPT files to print again or print from firefox??
Error log from PPT:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2014-03-25 22:12:04 +0000
Application Name: Microsoft PowerPoint
Application Bundle ID: com.microsoft.Powerpoint
Application Signature: PPT3
Application Version: 14.3.9.131030
Crashed Module Name: CoreFoundation
Crashed Module Version: 855.14
Crashed Module Offset: 0x00012192
Blame Module Name: Microsoft PowerPoint
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x002a285e
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0 -
Display Current Time and past 3 hours
Post Author: gronkette
CA Forum: Formula
I have a report that I need to display only the current hour and the past 3 hours rolling forward.
Example: If it is now 12:00 (noon) I would like to see the data for 10:00, 11:00 and 12:00
Then we it is 1:00 pm, I would like to see the date for 11:00, 12:00 and 1:00 - etc....
thanks!
Filed under: CRXIPost Author: SKodidine
CA Forum: Formula
The formula works just fine in my report, all I can say is make sure that the database field is DATETIME and that the values do indeed have date time. -
Impact of hourly Data load on BW and R/3
Hi...
As of now, the delta load from R/3 to BW is taking place every night. But, the users claim that they need it hourly.
Is this practice (hourly data load from r/3 to bw) is usually done? What would be the impact on BW and R/3? (any performance issues!)
What is the minimum best time interval for the delta loads?
Thanks,
Sai.I think you have to let user business requirements dictate the answers as long as there are not any system or application constraints.
We have a load that at run 4 times a day during a 9 hour window, once at the beginning to pickup any overnight work and then about every 3 hrs during the business day to pick up new information that is needed.
No discernible impact on R3 here, but that probably depends on your transaction volume and efficiency of the extractors that are used.
The user base does need to understand that loads will occur during the day and that depending on when the run a query, the results could change - but presumably that's the whole reason you are doing this in the first place.
This does result in more Requests, so you want to make sure you are compressing your cubes based on the Request's age rather number of requests.
Can't really think of much else. -
EJB Query Language where condtion based on date
Hi,
I am using EJB3 query language. In the table I have a column called requestdate which is in date time format. I have created an entity class.
I need to select few records using query language(named queries) based on this requestdate matching to the current date. I want to compare only based on Date value (truncating the time). Something like this
select max(o.req_id) from requests o where o.requestdate = :currentdate
currentdate is java.sql.Date value formatted to yyyymmdd only.
How can I do this using query language?
Please help to me get this done.
thanka
AnuradhaHi Anuradha ,
I'm afraid the query language does not support retrieving the date portion (i.e. truncating the time) from a date field.
I propose you turn you named into a BETWEEN query taking two parameters one for the beginning of the day and another for the end of the day. Then your named query could look like:
SELECT max(o.req_id) FROM requests o WHERE o.requestdate BETWEEN :start AND :end
The following code creates two calendar instances for the current day, one for 00:00:00 and another for 23:59:59:
Calendar start = Calendar.getInstance();
start.set(Calendar.HOUR_OF_DAY, 0);
start.set(Calendar.MINUTE, 0);
start.set(Calendar.SECOND, 0);
start.set(Calendar.MILLISECOND, 0);
Calendar end = Calendar.getInstance();
end.set(Calendar.HOUR_OF_DAY, 23);
end.set(Calendar.MINUTE, 59);
end.set(Calendar.SECOND, 59);
end.set(Calendar.MILLISECOND, 999);
Here is some sample code that creates a query instance for a named query called findMaxRequestPerDay and passes the Date of the above Calendar instance as actual parameter values. It assumes the named query is called findMaxRequestPerDay and the req_id field is a long:
Query query = em.createNamedQuery("findMaxRequestPerDay");
query.setParameter("start", start.getTime());
query.setParameter("end", end.getTime());
Long max = (Long)query.getSingleResult();
I hope this helps.
Regards Michael -
Creating query results in a report without data
Hi ABAP consultants,
First of all I would like to explain you all I am not ABAPPER and this is the first time I work with ABAP Query (I just receive orders...).
I need to do some reports about account receivables and I decided to work with the following tables: VBAK, VBAP, LIPS, LIKP, VBEP, VKDFS, VEPVG, VAPMA, KNB4.
Despite there are information on those tables when I test the query SAP retrieves that "There are no data selected". Why does that happen? Is there any logic that I disrespected?
Thank you all and have a nice day.
NaejHi,
check for contents in tables in tcode -se11 once u find the records try this one
Ex:
TABLES vbak.
select * from vbak.
write:vbak-vbeln.
ENDSELECT.
or
tables vbak.
data: t_vbak type table of vbak.
select * from vbak into table t_vbak.
loop at t_vbak into vbak.
write:vbak-vbeln.
endloop.
Maybe you are looking for
-
Blog post : "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)"
hi Using steps 1 to 13 from the blog post "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)" by Andrejus Baranovskis, I have been able to reproduce the issue he describes. see http://andrejusb.blogspot.com/2008/12/bug-in-createedit-view-crite
-
How to make some fields of table as non editable through SM30
Hi, I craeted a custom table and maintained thriugh sm30. 2 fields should be read only. Can any one help me un that Regards, Jayaram
-
Help With Cinema Display A1038
I'm planning in getting a A1039 Cinema Display 20". But before I buy this one I want to know if this can be plugged with a Macbook Pro Unibody A1286 2009. I will really apreciated If any one can help me with this. Thanks for your help. Pepe
-
I bought iphone 5s device only from apple and used my o2 sim for sometime, now I want to use 3 sim, can I replace the sim directly or anything Apple has to do on my device?
-
IFrame import DIRECTLY into iMovie 11
How do I import iFrame video DIRECTLY into iMovie 11? I recently upgraded from iMovie 09 to iMovie 11. Also, I bought a new camera (Canon) and it has iFrame. I recorded a test video in the iFrame mode. I opened iMovie. If there is a way to get i