Query with Time Interval

Hi,
I have a weekly report which needs to be generated for a particular day.
query is given below.
select last_update_dt transaction_date, COUNT(*) total_transaction,
COUNT(decode(upper(status),'SUCCESS',1)) Success_count,
COUNT(decode(upper(status),'FAILED',1)) Failed_count,
COUNT(DECODE(UPPER(STATUS),'ERROR',1)) ERROR_COUNT FROM GCIF_TRACKING_TABLE WHERE
CREATE_TS BETWEEN TO_TIMESTAMP('07/11/2012 00:00:00' ,'mm/dd/yyyy hh24:mi:ss') AND
TO_TIMESTAMP('07/11/2012 23:59:59','mm/dd/yyyy hh24:mi:ss' ) AND ACCT_NUM IS NOT NULL GROUP BY LAST_UPDATE_DT;
Am trying to generate a query with 30 minutes interval.
For this above query, instead of taking total count, i would require success and failure count on 30 min interval basis.
eg: time stamp: 00:00 - 00:30 , 00:31 - 01:00 etc
Could anyone pls help me in this. Thanks in advance.
can anyone revert on this pls. i need it very badly.
Edited by: 946948 on Jul 17, 2012 5:23 AM

This is the forum for Oracle's SQL Developer tool, not for general SQL or PL/SQL questions. This question would be better answered in the PL/SQL.

Similar Messages

Data record with time interval error

Hi,
I have come across the following error.
Data record with Time interval error and data is getting loaded into data target and no PSA in between.
thanks
kris

Hi Kris,
Could you please explain your problem little bit more. I mean what is source and target, or you using IP or DTP.
goto the details in monitor tab, you will come to know to which record yo uhave error.
If you are running IP, it is recommended to keep PSA.
Regards,
Venkatesh

How to take the data from excel list to sap r/3(with time interval)

hi experts,
   how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.

Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '500'
      giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva

How to make dynamic select list with time interval of 15 minutes

Dear all,
I've a question. I need a select list that contains time with intervals of 15 minutes from 08:00 till 16:00.
example 8:00
8:15
8:30
8:45
9:00
9:15
and so on till 16:00
The values or stored in a varchar column.
Can someone please help me with this one?
Best regards,
Caroline

I think the easiest way would be to create a table "INTERVALS" with one row and column "INT_PERIOD"? per 15 minute period description
8:00
8:15
16:00
Then create your select list item based on a Dynamic List, or Query as
SELECT int_period d, int_period r
FROM INTERVALS
ORDER BY INT_PERIODYou could write something to load the table, but that might take about as long to just edit in the values.
Making it a Dynamic LOV, you then have it available anywhere else you might need it.
Edited by: Bob37 on May 4, 2012 8:57 AM

Help with Time Interval

Hi,
Appreciate all help on the following:
Have a requirement to validate user messages that are received in a batch. Each message in a message has a start-time (date) and a end-time (date). Need to validate and ensure that there are no time overlaps between user messages. I have created a TimerInterval class with a constructor that takes startTime, endTime as arguments. Upon reading each message, I create an instance of TimerInterval with startTime, endTime and save it into a collection. However, I don't really have a good way to check for time overlaps; keep in mind two messages might have exact startTime, endTime.
All suggestions are appreciated.
Regards,
Kevin

If you keep all the existing non-overlapping messages in a sorted list you can use a binary search (or newton's method) to speed up the searching for the last exiting message starting before or at the same time as the new message to be inserted. Once you find this search forward iteratively until you find the place to insert the new message, or reject it since it overlaps. It should be order n*log n.

Time interval for contoured move

I have a interpolator and it output the interpolated data with time interval 1ms. When I do the experiment using stepper motor controlled by 7344 (contoured move). the time interval is much bigger the 1ms, resulting in very low velocity. How to solve this problem? Increasing the time interval of interpolator? Is there anyone has any ideas? Thanks a lot!

In contouring mode you can set the time interval for the position buffer in the Configure Buffer function. Here is the parameter description:
Requested Interval (10 ms) is additional data for the Position
buffer type. The Position buffer type requires a Requested Interval parameter,
and indicates the time between contouring data points in milliseconds. For all
other buffer types, the Requested Interval parameter is ignored.
The controller uses the closest value it can that is greater than
or equal to the interval value you requested. Your time interval must be an even
multiple of the PID rate. Refer to the description for the Actual
Interval parameter for more information.
When used with Breakpoint or High-Speed
Capture, Requested Interval indicates how often, in
milliseconds, the onboard data is updated from the hardware, and the value is a
whole number.Please note that 10 ms is the fastest interval that you can set. If your data is sampled with a 1 ms time interval and you want to use the 10 ms time interval with your 7344 you simply should decimate your contouring data array by copying every 10th value to your contouring position array.
Best regards,
Jochen Klier
National Instruments Germany

Set Time Interval with custom fields in generic list with view(SPViewCollection.SPViewType.Calendar)

I need to set time interval range with custom date fields in sharepoint view SPViewCollection.SPViewType.Calendar. How to do that?
My code is this:
System.Collections.Specialized.StringCollection viewFields = new System.Collections.Specialized.StringCollection();
viewFields.Add("FechaInicio");
viewFields.Add("FechaFin");
string query = @"<Query>
<Where>
<DateRangesOverlap>
<FieldRef Name=""FechaInicio"" />
<FieldRef Name=""FechaFin"" />
<FieldRef Name=""RecurrenceID"" />
<Value Type=""DateTime"">
<Week />
</Value>
</DateRangesOverlap>
</Where>
</Query>";
SPView newView = reserva.Views.Add("CalendarView", viewFields, query, 0, true, true, SPViewCollection.SPViewType.Calendar, false);
"FechaInicio" and "FechaFinal" ara datetime fields in my generic list.
Thanks.

Hi,
According to your post, my understanding is that you want to see the calendar view begin and end time for the time interval.
We can use the SharePoint Manager to view the internal name for the begin and end time for the time interval.
Open SharePoint Manager 2013->click your site->click
Lists->select your list name->click Views->select your calendar view name->click the
Schema Xml to check the internal name for the time interval begin and end.
We can download the SharePoint Manager in here:
http://spm.codeplex.com/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Not able to use date with time in sql query

Hi,
select a.contract_number,b.start_date,b.end_date,b.price_negotiated,b.attribute_category,b.attribute1,a.sts_code,a.contract_number_modifier,b.cle_id,b.creation_date
from OKC_K_HEADERS_ALL_B a,OKC_K_LINES_B b
where a.id = b.dnz_chr_id
and b.cle_id is not null
and a.contract_number_modifier is not null
and a.sts_code in ('ACTIVE','SIGNED','60 DAY HOLD','HOLD')
and b.creation_date between to_date('21-10-2013 9:19:48','DD-MM-YYYY HH24:MI:SS') and sysdate;
If I execute this query in toad it is giving me proper results.This query populates the results between the two date with time.
But I am facing issue when I am using this query in the procedure. The procedure is as below.
If I use the same query in the procedure I am getting wrong output.
CREATE OR REPLACE procedure xx_prog_upd_annualized_amt(errbuf out varchar2, retcode out varchar2)
as
cursor c1 (l_date in varchar2)is
select a.contract_number,b.start_date,b.end_date,b.price_negotiated,b.attribute_category,b.attribute1,a.sts_code,a.contract_number_modifier,b.cle_id
from OKC_K_HEADERS_ALL_B a,OKC_K_LINES_B b
where a.id = b.dnz_chr_id
and b.cle_id is not null
and a.contract_number_modifier is not null
and a.sts_code in ('ACTIVE','SIGNED','60 DAY HOLD','HOLD')
and b.creation_date between to_date(l_date,'DD-MM-YYYY HH24:MI:SS') and sysdate;
v_date varchar2(100);
v_total_days number;
v_annualized_amount number;
begin
begin
select max(fcr.actual_start_date) into v_date
from fnd_concurrent_programs_vl fcp
,fnd_concurrent_requests fcr
where fcp.concurrent_program_id = fcr.concurrent_program_id
and fcp.user_concurrent_program_name like 'Renewed Annualized Amount Updation';
exception
when others then
fnd_file.put_line(fnd_file.log,'Invalid date');
end;
fnd_file.put_line(fnd_file.output,v_date);
fnd_file.put_line(fnd_file.output,sysdate);
fnd_file.put_line(fnd_file.output,'***************Start of Program***************');
fnd_file.put_line(fnd_file.output,'***************Hi***************');
For i in c1(v_date) loop
SELECT
         1
       + 30 * TRUNC (MONTHS_BETWEEN ( TO_DATE (i.end_date, 'DD-MON-YYYY'), TO_DATE (i.start_date, 'DD-MON-YYYY')))
       + LEAST (EXTRACT (DAY FROM TO_DATE (i.end_date, 'DD-MON-YYYY')), 30)
       - LEAST (EXTRACT (DAY FROM TO_DATE (i.start_date, 'DD-MON-YYYY')), 30)
       + CASE
            WHEN EXTRACT (DAY FROM TO_DATE (i.end_date, 'DD-MON-YYYY')) < EXTRACT (DAY FROM TO_DATE (i.start_date, 'DD-MON-YYYY')) THEN 30
            ELSE 0
         END
          daysbetween into v_total_days
FROM dual;
fnd_file.put_line(fnd_file.output,i.contract_number);
fnd_file.put_line(fnd_file.output,v_total_days);
If v_total_days < 360 then
v_annualized_amount := (360*i.price_negotiated)/v_total_days;
update OKC_K_LINES_B
set attribute_category = 'Annualized Amount',attribute1 = v_annualized_amount
where cle_id = i.cle_id;
   fnd_file.put_line(fnd_file.output,v_annualized_amount);
    fnd_file.put_line(fnd_file.output,i.cle_id);
    elsif v_total_days >= 360 then
update OKC_K_LINES_B
set attribute_category = 'Annualized Amount',attribute1 = i.price_negotiated
where cle_id = i.cle_id;
end if;
end loop;
commit;
fnd_file.put_line(fnd_file.output,'***************End of Program***************');
null;
end;

SureshM wrote:
Hi Purvesh,
Apologize for not giving the sufficient information.
max(fcr.actual_start_date) = here I am getting date with time (for eg :9/4/2012 6:47:49 PM)
Datatype for this column is date.
This actual start date I am storing in varchar2 variable and then converting this value to date with time.
My requirement is to pick the rows between the two timestamps which I am unable to do in the procedure.
Regards
Suresh
YOu are losing the Time information while fetching the data into a VARCHAR2 variable. change the datatype of v_date to DATE and get rid of the TO_DATE logic in cursor and simply use v_date variable.
Message was edited by: PurveshK misread.

Query variable : selection option with no interval

Hello,
Is it possible to define a query variable as selection option, with no interval (like in abap).
I am in 3.X version.
Many Thanks in advance,
Manuel

Hi Manuel,
This should be possible through multiple single value variables, but to ensure that the user has not in input the same charateristic value for exclusion and selection you may choose to write customer exit at the background.
I think interval and select option would allow 'To values'.
So I was wrong in what I said before. SORRY
However multiple single value would not allow exclusion, I think.
Your scenario would only be possible by excluding multiple single values in variable type select option and process the variable using customer exit, to trmove all to Values.
But you are right, you cannot have your scenrio handled , I think.
( ie multiple exclusion in from values with no To Values )
One more way is restrict your characteristic by two input ready variables, one select option for exclusion and have a customer exit to delte all inclusion that were input accidently and one multiple value ready for input variable.
But, all in all, there would be no straight drive through this I think.
Hope it helps,
Regards,
Sunmit.

Execution time of query with high variance

I have an Oracle Database 11.2 R2 which is set up just for testing purposes, so there is no other activity except mine. Now I have a query which I ran 10 times in a row. Between the executions I always flushed BUFFER_CACHE and SHARED_POOL. The strange thing is, that the execution time of the query is strongly varying from 13 seconds up to 207 seconds. From the 10 executions I have 4 times <25 seconds and 4 times > 120 seconds.
What could be the reason for this? As I've said, there is no other activity on the database and it is always the same query with the same parameters running on the same set of data.
The background to this is that I would like to compare the execution time of exactly the same query with different database settings. So I thought I could just run the query ten times and use the average but I didn't expect such a high variance.
Kind regards
Peter

Hi,
for each execution, look at:
1) plan hash value
2) total logical I/O
3) physical I/O
That should give you some clues as to what's going on.
Best regards,
Nikolay

Query with different parameter take different time to execute.

Hi,
I am a C/C++ programmer and newbie to database. I find weird case to my company database. oracle 10g.
I have a query (below). When I set GENRE_ID value to 20, query execution time only take *5* seconds. But when I change to 10, it take *54* seconds! The same query but different values GENRE_ID (20 or 10) -- it also happen to other GENRE_ID values.
on below query
WHERE substr(GENRE_ID,0,2) = 10 and GENRE_ID != 10) take 54 seconds
WHERE substr(GENRE_ID,0,2) = 20 and GENRE_ID != 20) take 5 seconds
The explain plan give exact same result for both queries.
I have follow Re: 3. How to improve the performance of my query? / My query is running slow. for optimizer but the problem still there.
And we have rebuilt all indexes.
Anyone can help me? I need any advises for this problem.
Note:
Song table only have 570K records and Song_vod table 1100 records.
Query:
select *
from(
select rownum rowno, a.*
from(
select a.SONG_VOD_ID, a.SONG_ID, a.VOD_TITLE, a.ALBUM_ID, a.ARTIST_ID, a.VOD_ISSUE_DATE, a.VOD_ORDER_ISSUE_DATE, a.VOD_ADULT_YN, a.VOD_L_IMG_PATH, a.VOD_M_IMG_PATH, a.VOD_S_IMG_PATH, a.RECOMMEND_CNT, a.OPPOSE_CNT, get_song_name(a.SONG_ID) SONG_NAME, get_album_name(a.ALBUM_ID) ALBUM_NAME, get_artist_name(a.ARTIST_ID) ARTIST_NAME, VOD_ISSUE_DATE vodIssueDate
from SONG_VOD a inner join SONG b on a.SONG_ID = b.SONG_ID
where a.LC_STATUS_CD = 'CS0006'
AND (b.GENRE_ID
in (
select GENRE_ID
from MD_GENRE
WHERE substr(GENRE_ID,0,2) = 10
and GENRE_ID != 10)
OR b.GENRE_ID
in (
select GENRE_ID
from MD_GENRE
WHERE substr(GENRE_ID,0,2) = '40'
and GENRE_ID != '40'
) order by a.REG_DATE desc, a.SONG_VOD_ID desc
) a WHERE rownum <= 0 + 30
Thank you,
Regards
-=Rika Chaniago=-

907814 wrote:
I am a C/C++ programmer and newbie to database. I find weird case to my company database. oracle 10g.
I have a query (below). When I set GENRE_ID value to 20, query execution time only take *5* seconds. But when I change to 10, it take *54* seconds! The same query but different values GENRE_ID (20 or 10) -- it also happen to other GENRE_ID values.This is to be expected. Even an IDENTICAL query can (and often will) have DIFFERENT execution times.
The typical reason is how fast the query process can get to the data block(s) containing the relevant row(s). Is that data block still on disk and require expensive and slow physical I/O to move it into the buffer cache for use? Is that data block already cached for much faster logical I/O access? If in memory, is there any contention in getting a latch for the chain the data block hangs off from (how hot is that block)? Etc.
The run-time environment is not static. Thus execution times of queries (called cursors in Oracle) is not static. Execution times are expected to vary.
Some basics. SQL code is source code. SQL code needs to be parsed and converted into a set of instructions that the server can execute. So it is similar to C/C++. SQL source code needs to be compiled. This executable code in Oracle is called a cursor.
Like your code, the cursor can be executed with different input variables (bind variables). However, that code would have been compiled using certain assumptions about the data. And that executable code may work fine for some input data, and work not so okay for other input data. As the input parameter values are not not equal. E.g. there are a 1000 rows to process when employee type parameter is "employee" and only 10 rows when it is "manager". The code could have been compiled with the assumption that 10 rows would be the average for all input parameters - the Cost Based Optimiser needs to base its decision on the best execution path for that SQL source code on certain assumptions about the data. These may not always be correct. (usually due incorrect or stale stats about the data)
Thus you also need to look at what the execution plan is (the URL for which has already been supplied).
The Oracle® Database Performance Tuning Guide is at http://www.oracle.com/pls/db112/portal.all_books

Capturing data of the previous time interval with Oracle Stream(HotLog)

I read from 10g Oracle manual that Oracle Steam can capture data within specified time interval with begin_data and end_data options.
For example :
BEGIN
DBMS_CDC_PUBLISH.CREATE_CHANGE_SET(
change_set_name => 'set_cns',
description => 'set_cns...',
change_source_name => 'HOTLOG_SOURCE',
stop_on_ddl => 'y',
begin_date => sysdate,
end_date => sysdate + 1);
END;
However if I set begin_date to previous time from now, Oracle doesn't caputre data anymore in this case.(HotLog method)
(I set begin_date => sysdate - 1/24
end_date => sysdate + 1/24.)
Does anybody know to capture the previous time interval with Oracle Stream?

Change C2 to:
cursor c2(passing_date IN date) IS
SELECT MONITOR_ID, SAMPLE_ID,
               COLL_TIME, DEW_POINT
    FROM ARCHIVE_DATA
    WHERE COLL_TIME < passing_date
    ORDER BY COLL_TIME desc;And rather than populating a table with the three records, you could just select the three records using: where COLL_TIME between Prev3_time and Prev1_time

Some website opens automatically in a new tab with some time interval repeatedly

Sometimes a specific website ie. " http://www.yourtest-india.com/cgi-bin/wingame.pl?partner_pk=8&wingame_pk=40&freetest_pk=10&SourceId=355&CreativeId=23885235&LineItemId=8914668&PublisherId=309257&SectionId=8433399&sub_id_postback=00005de1e959adfd24a71a545c7258e4a8e59 " opens repeatedly in new tab with some time interval and even if I close the new tab that has opened again this new tab opens after same time interval.
This happens only when the firefox window is active or open. When the window is minimized no new tabs open. But once I switch to firefox new tab opens immediately with the same page as mentioned above.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can pulse measurement.vi measures 2M points with 10ns time interval?

Hi,
I used pulse measurement.vi to measure the pulse duration of waveforms when the waveforms exceed certain threshold level. The data file has 2 millions data points with 10ns time interval. But I got error message saying that
"The waveform did not cross the mid reference level enough time to perform this measurement. Check the signal length, mid reference level, and reference level unit."
I was wondering if pulse measurement.vi is capable of handling such large file or it was due to my paramenter errors.
Thank you for your help in advance.

I realized that I can't really modify the percent level settings or specfication of the pulse measurement.vi. For instance, I changed the percent level setting to peak instead of the default auto select. After running the VI unsuccessfully and I reopened the pulse measurement.vi, I saw the percent level setting was set to auto select again instead of peak method. I have attached the image of the block digram and a very small part of the waveform data. I hope you can open both.
Thank you.
Attachments:
pulse measurement.doc ‏45 KB
example.txt ‏2 KB

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Query with Time Interval

Similar Messages

Maybe you are looking for