Querying CGPL_HIERARCHY using RFC_READ_TABLE

Hi,
Does anyone has any idea how this could be done?
It seems CGPL_HIERARCHY.GUID is a RAW data type and when using RFC_READ_TABLE and providing a where clause - GUID EQ '5D29E4460A487750' (as an example) doesn't yield any result , when the fact is that a record with the mentioned GUID does exist in the database.
I am sure it has to do something with GUID being a RAW data type.
Would appreciate any thoughts on this.
Regards
Udayan

With the domain (CGPL_PROJECT_GUID) of the field GUID convertion exit (CGPLP) is attached
CONVERSION_EXIT_CGPLP_INPUT
CONVERSION_EXIT_CGPLP_OUTPUT
So I think u need to convert the GUID to its internal form using
CONVERSION_EXIT_CGPLP_INPUT. Then u can use it in the where clause.

Similar Messages

Can I refactor this query to use an index more efficiently?

I have a members table with fields such as id, last name, first name, address, join date, etc.
I have a unique index defined on (last_name, join_date, id).
This query will use the index for a range scan, no sort required since the index will be in order for that range ('Smith'):
SELECT members.*
        FROM members
        WHERE last_name = 'Smith'
        ORDER BY joindate, idIs there any way I can get something like the following to use the index (with no sort) as well:
SELECT members.*
        FROM members
        WHERE last_name like 'S%'
        ORDER BY joindate, idI understand the difficulty is probably; even if it does a range scan on every last name 'S%' (assuming it can?), they're not necessarily in order. Case in point:
Last_Name: JoinDate:
Smith          2/5/2010
Smuckers     1/10/2010An index range scan of 'S%' would return them in the above order, which is not ordered by joindate.
So is there any way I can refactor this (query or index) such that the index can be range scanned (using LIKE 'x%') and return rows in the correct order without performing a sort? Or is that simply not possible?

xaeryan wrote:
I have a members table with fields such as id, last name, first name, address, join date, etc.
I have a unique index defined on (last_name, join_date, id).
This query will use the index for a range scan, no sort required since the index will be in order for that range ('Smith'):
SELECT members.*
FROM members
WHERE last_name = 'Smith'
ORDER BY joindate, idIs there any way I can get something like the following to use the index (with no sort) as well:
SELECT members.*
FROM members
WHERE last_name like 'S%'
ORDER BY joindate, idI understand the difficulty is probably; even if it does a range scan on every last name 'S%' (assuming it can?), they're not necessarily in order. Case in point:
Last_Name: JoinDate:
Smith          2/5/2010
Smuckers     1/10/2010An index range scan of 'S%' would return them in the above order, which is not ordered by joindate.
So is there any way I can refactor this (query or index) such that the index can be range scanned (using LIKE 'x%') and return rows in the correct order without performing a sort? Or is that simply not possible?Come on. Index column order does matter. "LIKE 'x%'" actually is full table scan. The db engine accesses contiguous index entries and then uses the ROWID values in the index to retrieve the table rows.

How to write a SQL Query without using group by clause

Hi,
Can anyone help me to find out if there is a approach to build a SQL Query without using group by clause.
Please site an example if is it so,
Regards

I hope this example could illuminate danepc on is problem.
CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
CREATE OR REPLACE FUNCTION GET_ARR return my_array
as
     arr my_array;
begin
     arr := my_array();
     for i in 1..10 loop
          arr.extend;
          arr(i) := i mod 7;
     end loop;
     return arr;
end;
select column_value
from table(get_arr)
order by column_value;
select column_value,count(*) occurences
from table(get_arr)
group by column_value
order by column_value;And the output should be something like this:
SQL> CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
2 /
Tipo creato.
SQL>
SQL> CREATE OR REPLACE FUNCTION GET_ARR return my_array
2 as
3   arr my_array;
4 begin
5   arr := my_array();
6   for i in 1..10 loop
7    arr.extend;
8    arr(i) := i mod 7;
9   end loop;
10   return arr;
11 end;
12 /
Funzione creata.
SQL>
SQL>
SQL> select column_value
2 from table(get_arr)
3 order by column_value;
COLUMN_VALUE
           0
           1
           1
           2
           2
           3
           3
           4
           5
           6
Selezionate 10 righe.
SQL>
SQL> select column_value,count(*) occurences
2 from table(get_arr)
3 group by column_value
4 order by column_value;
COLUMN_VALUE OCCURENCES
           0          1
           1          2
           2          2
           3          2
           4          1
           5          1
           6          1
Selezionate 7 righe.
SQL> Bye Alessandro

Unable to parse query when using dblink in forms 4.5

Hi,
I have created a query that uses a DBlink because I need to do query on a table located on another dbase. I've used the query on creating my report using Reports 6i. The report needs to be called from a menu on our system, which was developed under Developer 2000 (forms 4.5). The problem is, when I tried to access the report from the menu, it returns the error 'unable to parse query'. What I did after getting error was to create a dummy module using Forms 6i, and call my report from there. It worked fine.
By the way, the table that I'm accessing using the dblink is under Oracle 9i dbase, and the dbase of the system that I've been working at is Oracle 8i.
I don't have any idea on what's causing this error. Is there a compatibility issue when using a dblink located in Oracle 9i database with forms 4.5?
Thanks!

Hello,
Not sure if it is the good answer, but I know that Forms does not recognize dblink and owner.object syntax. You have to create a simple synomym that point to the distant object and use this synonym within Forms.
Francois

WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER

Dear Sir,
please any one can answer me as soon as possible its very urgent
WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER
I     As oracle mapviewer Chapter 8 (Oracle Maps) says generating our own Web based mapping application we are trying to generate our own maps for our own data contains in our layers like example boundary lines and roads and etc. and we are following complete example as described in Oracle Mapviewer Document Chapter 8.
Before this step we tried with demo data downloaded from OTN mvdemo. And we downloaded latest demo today itself from the OTN and imported into our database schema called mvdemo. And we copied all three jar files mvclient and mvconnection and mvpalette into our jdeveloper .
II.     We created a jsp to execute the following code from oracle mapviewer chapter 8 documents
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/customizable" prefix="cust"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jwcache.tld"
prefix="jwcache"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/fileaccess.tld"
prefix="fileaccess"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jesitaglib.tld"
prefix="JESI"%>
<f:view>
<html>
<head>
<META http-equiv="Content-Type" content="text/html" charset=UTF-8>
<TITLE>A sample Oracle Maps Application</TITLE>
<script language="Javascript" src="jslib/loadscript.js"></script>
<script language=javascript>
var themebasedfoi=null
function on_load_mapview()
var baseURL = " http://localhost:8888/mapviewer/omserver";
// Create an MVMapView instance to display the map
var mapview = new MVMapView(document.getElementById("map"), baseURL);
// Add a base map layer as background
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
// Add a theme-based FOI layer to display customers on the map
themebasedfoi = new MVThemeBasedFOI('themebasedfoi1','mvdemo.customers');
themebasedfoi.setBringToTopOnMouseOver(true);
mapview.addThemeBasedFOI(themebasedfoi);
// Set the initial map center and zoom level
mapview.setCenter(MVSdoGeometry.createPoint(-122.45,37.7706,8307));
mapview.setZoomLevel(4);
// Add a navigation panel on the right side of the map
mapview.addNavigationPanel('east');
// Add a scale bar
mapview.addScaleBar();
// Display the map.
mapview.display();
function setLayerVisible(checkBox){
// Show the theme-based FOI layer if the check box is checked and
// hide the theme-based FOI layer otherwise.
if(checkBox.checked)
themebasedfoi.setVisible(true) ;
else
themebasedfoi.setVisible(false);
</script>
</head>
<body onload= javascript:on_load_mapview() >
<h2> A sample Oracle Maps Application</h2>
<INPUT TYPE="checkbox" onclick="setLayerVisible(this)" checked/>Show customers
<div id="map" style="width: 600px; height: 500px"></div>
</body>
</html>
</f:view>

<%-- oracle-jdev-comment:auto-binding-backing-bean-name:backing_mapPage--%>
III.     When we run this jsp it’s giving us following Two errors
1     Error:     ‘MVMapView’ is undefined
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
2     Error:     ‘themebasedfoi’ is null or not an object
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
Please let us know what could be problem as soon as possible. Very urgent
Please let us know where we can find Mapviewer AJAX API’s for Jdeveloper Extention
Thanks
Kabeer

I currently use parameters, and they are passed from the form to the report. Report is then generated based on a function returning ‘strongly typed’ cursor. The ‘strongly typed’ cursor in my case returns a record consisting of an orderly collection of fields.
This collection of fields is returned by another function that relies on the IF … THEN logic.
However, the number of IF ... THEN statements is quite large (currently 64 covering all possible combinations of 6 parameters available in the form).
I would like to avoid the large number of IF … THEN statements, and hope that there is a way of passing a string to a query, where the Dynamic SQL would in Select close and Where close reflect parameters passed by the form.
In addition to this I would like to avoid creating and populating a table or a view dedicated to the report, because this may lead to a conflict in case of multiple users concurrently generating reports with different choice of parameters.
Edited by: user6883574 on May 28, 2009 9:16 PM

How to find out Query last used by whom

Dear All,
Can any one tell me that "How to find out the Query last used by whom. I have already searched in SDN but no luck. In my system BW Stats are not installed and I have already checked the below tables.
RSZELTDIR - Directory of the reporting component elements
RSZELTTXT - Texts of reporting component elements
RSZELTXREF - Directory of query element references
RSRREPDIR - Directory of all reports (Query GENUNIID)
RSZCOMPDIR - Directory of reporting components
RSZRANGE - Selection specification for an element
RSZSELECT - Selection properties of an element
RSZELTDIR - Directory of the reporting component elements
RSZCOMPIC - Assignment reuseable component <-> InfoCube
RSZELTPRIO - Priorities with element collisions
RSZELTPROP - Element properties (settings)
RSZELTATTR - Attribute selection per dimension element
RSZCALC - Definition of a formula element
RSZCEL - Query Designer: Directory of Cells
RSZGLOBV - Global Variables in Reporting
RSZCHANGES Change history of reporting components
I am able to find out the Date and time but not the user name. So could you please help on this.
Regards
Sankar

i think u have missed it.
RSZCOMPDIR IS THE ONLY TABLE WHICH PROVIDES THE DATA.
ENTER TECHNICAL QUERY Name in RSZCOMPDIR-COMPID.
RSZCOMPDIR-TSTNAM gives you the user id of sap bw user who made the change.
RSZCOMPDIR-TSTPDAT gives you date on which change was made .
RSZCOMPDIR-TSTPTIM gives you timestamp on which change was made .
all users details can be obtained from TCODE SU01 where you need to enter sap user id.
You can also get user name( description) by using tcode SE09 and entering above sap user id.

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Invalid column name in query string - using Format function

In my post just before this one the problem was solved for writing a query string using a date range. The rest of the query string includes the same date field (Call_Date) but formatted as 'MMM-YY'. I get an invalid column name error when I add this field to the query string. Here is the rest of the query string:
strSql = "SELECT Format(CALL_DATE,'mmm-yy'), " _
& "HOME_REGION FROM CCC2.CASE_EPRP " _
& "WHERE (HOME_REGION = 'NCR') AND " _
"(CALL_DATE >= to_date( '1/1/2002', 'MM/DD/YYYY' )" _
& "AND CALL_DATE <= to_date( '2/28/2003', 'MM/DD/YYYY' ))"
In the Access Query tool I can include this field
Format(CALL_DATE,'mmm-yy')
and the query runs fine (I just need to make it dynamic using ADO). But in my ADO query string above, I get the invalid column name error. Is there a way I can include
Format(CALL_DATE,'mmm-yy')
in my ADO query string? I appologize for not being more familiar with Oracle Sql. Any help greatly appreciated.
Thanks again,
Rich

Thank you very much for your reply. I think I'm getting closer to the solution. Just I got an error message
"date format not recognized"
when I add "to_char( call_date, 'mmm-yy' )" to the query string. I tried using all uppercase, but that did not make a difference. Do I need to use to_date inside the to_char maybe?
to_char(to_date(call_date, 'mmm/yy'), 'mmm-yy')
Thanks again for your help.
Rich

Needs help to retrive the last row in a select query without using rownum

Hi ,
i need to retrive the last row from the select sub query without using rownum.
is there any other way to retrive the last row other than the below query.
is that the ROWNUM=1 will always retrive the 1 row of the select query ?
select from*
*(select ename from employee where dept_id=5 order by desc) where rownum=1;*
Please advise.
thanks for your help advance,
regards,
Senthur

957595 wrote:
Actually my problem is ithat while selecting the parents hiearchy of the child data using
CONNECT BY PRIOIR query
I need the immediate parent of my child data.
For example my connect BY query returns
AAA --- ROOT
BBB --PARENT -2
CCC --PARENT-1
DDD IS my input child to the connect by query
Immediate parent of my child data "DDD" ---> CCC(parent -1)
i want the data "CCC" from the select query,for that i am taking the last row of the query with rownum.
I got to hear that using ROWNUM to retrive the data will leads to some problem.It is a like a magic number.I am not sure what the problem will be.
So confusing with using this rownum in my query.
Please advice!!!It's not quite clear what you're wanting, but perhaps this may help?
you can select the PRIOR values to get the parent details if you want...
SQL> ed
Wrote file afiedt.buf
1 select empno, lpad(' ',(level-1)*2,' ')||ename as ename, prior empno as mgr
2 from emp
3 connect by mgr = prior empno
4* start with mgr is null
SQL> /
     EMPNO ENAME                                 MGR
      7839 KING
      7566   JONES                              7839
      7788     SCOTT                            7566
      7876       ADAMS                          7788
      7902     FORD                             7566
      7369       SMITH                          7902
      7698   BLAKE                              7839
      7499     ALLEN                            7698
      7521     WARD                             7698
      7654     MARTIN                           7698
      7844     TURNER                           7698
      7900     JAMES                            7698
      7782   CLARK                              7839
      7934     MILLER                           7782
14 rows selected.(ok, not the best of examples as the mgr is already known for a row, but it demonstrates you can select prior data)

SQL Query not using Composite Index

Hi,
Please look at the below query:
SELECT pde.participant_uid
,pde.award_code
,pde.award_type
,SUM(decode(pde.distribution_type
,'FORFEITURE'
,pde.forfeited_quantity *
pde.sold_price * cc.rate
,pde.distributed_quantity *
pde.sold_price * cc.rate)) AS gross_Amt_pref_Curr
FROM part_distribution_exec pde
,currency_conversion cc
,currency off_curr
WHERE pde.participant_uid = 4105
AND off_curr.currency_iso_code =
pde.offering_currency_iso_code
AND cc.from_currency_uid = off_curr.currency_uid
AND cc.to_currency_uid = 1
AND cc.latest_flag = 'Y'
GROUP BY pde.participant_uid
,pde.award_code
,pde.award_type
In oracle 9i, i"ve executed this above query, it takes 6 seconds and the cost is 616, this is due to non usage of the composite index, Currency_conversion_idx(From_currency_uid, To_currency_uid, Latest_flag). I wonder why this index is not used while executing the above query. So, I've dropped the index and recreated it. Now, the query is using this index. After inserting many rows or say in 1 days time, if the same query is executed, again the query is not using the index. So everyday, the index should be dropped and recreated.
I don't want this drop and recreation of index daily, I need a permanent solution for this.
Can anyone tell me, Why this index goes stale after a period of time???? Please take some time and Solve this issue.
-Sankar

Hi David,
This is Sankar here. Thankyou for your reply.
I've got the plan table output for this problematic query, please go thro' it and help me out why the index CURRENCY_CONVERSION_IDX is used now and why it's not using while executing the query after a day or inserting some records...
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 26 | 15678 | 147 |
| 1 | TABLE ACCESS BY INDEX ROWID | PART_AWARD_PAYOUT_SCHEDULE | 1 | 89 | 2 |
|* 2 | INDEX UNIQUE SCAN | PART_AWARD_PAYOUT_SCHEDULE_PK1 | 61097 | | 1 |
| 3 | SORT AGGREGATE | | 1 | 67 | |
|* 4 | FILTER | | | | |
|* 5 | INDEX RANGE SCAN | PART_AWARD_PAYOUT_SCHEDULE_PK1 | 1 | 67 | 2 |
| 6 | SORT AGGREGATE | | 1 | 94 | |
|* 7 | FILTER | | | | |
|* 8 | TABLE ACCESS BY INDEX ROWID | PART_AWARD_PAYOUT_SCHEDULE | 1 | 94 | 3 |
|* 9 | INDEX RANGE SCAN | PART_AWARD_PAYOUT_SCHEDULE_PK1 | 1 | | 2 |
|* 10 | FILTER | | | | |
|* 11 | HASH JOIN | | 26 | 15678 | 95 |
|* 12 | HASH JOIN OUTER | | 26 | 11596 | 91 |
|* 13 | HASH JOIN | | 26 | 10218 | 86 |
| 14 | VIEW | | 1 | 82 | 4 |
| 15 | SORT GROUP BY | | 1 | 116 | 4 |
|* 16 | TABLE ACCESS BY INDEX ROWID | PART_AWARD_LEDGER | 1 | 116 | 2 |
|* 17 | INDEX RANGE SCAN | PARTICIPANT_UID_IDX | 1 | | 1 |
|* 18 | HASH JOIN OUTER | | 26 | 8086 | 82 |
|* 19 | HASH JOIN | | 26 | 6006 | 71 |
| 20 | NESTED LOOPS | | 36 | 5904 | 66 |
| 21 | NESTED LOOPS | | 1 | 115 | 65 |
| 22 | TABLE ACCESS BY INDEX ROWID | CURRENCY_CONVERSION | 18 | 756 | 2 |
|* 23 | INDEX RANGE SCAN | KLS_IDX_CURRENCY_CONV | 3 | | 1 |
| 24 | VIEW | | 1 | 73 | 4 |
| 25 | SORT GROUP BY | | 1 | 71 | 4 |
| 26 | TABLE ACCESS BY INDEX ROWID| PART_AWARD_VALUE | 1 | 71 | 2 |
|* 27 | INDEX RANGE SCAN | PAV_PARTICIPANT_UID_IDX | 1 | | 1 |
| 28 | TABLE ACCESS BY INDEX ROWID | PARTICIPANT_AWARD | 199 | 9751 | 1 |
|* 29 | INDEX UNIQUE SCAN | PARTICIPANT_AWARD_PK1 | 100 | | |
|* 30 | INDEX FAST FULL SCAN | PARTICIPANT_AWARD_TYPE_PK1 | 147 | 9849 | 4 |
| 31 | VIEW | | 1 | 80 | 10 |
| 32 | SORT GROUP BY | | 1 | 198 | 10 |
|* 33 | TABLE ACCESS BY INDEX ROWID | CURRENCY_CONVERSION | 1 | 42 | 2 |
| 34 | NESTED LOOPS | | 1 | 198 | 8 |
| 35 | NESTED LOOPS | | 2 | 312 | 4 |
| 36 | TABLE ACCESS BY INDEX ROWID| PART_DISTRIBUTION_EXEC | 2 | 276 | 2 |
|* 37 | INDEX RANGE SCAN | IND_PARTICIPANT_UID | 1 | | 1 |
| 38 | TABLE ACCESS BY INDEX ROWID| CURRENCY | 1 | 18 | 1 |
|* 39 | INDEX UNIQUE SCAN | CURRENCY_AK | 1 | | |
|* 40 | INDEX RANGE SCAN | CURRENCY_CONVERSION_AK | 2 | | 1 |
| 41 | VIEW | | 1 | 53 | 4 |
| 42 | SORT GROUP BY | | 1 | 62 | 4 |
|* 43 | TABLE ACCESS BY INDEX ROWID | PART_AWARD_VESTING | 1 | 62 | 2 |
|* 44 | INDEX RANGE SCAN | PAVES_PARTICIPANT_UID_IDX | 1 | | 1 |
| 45 | TABLE ACCESS FULL | AWARD | 1062 | 162K| 3 |
| 46 | TABLE ACCESS BY INDEX ROWID | CURRENCY | 1 | 18 | 2 |
|* 47 | INDEX UNIQUE SCAN | CURRENCY_AK | 102 | | 1 |
Predicate Information (identified by operation id):
2 - access("PAPS"."AWARD_CODE"=:B1 AND "PAPS"."PARTICIPANT_UID"=4105 AND "PAPS"."AWARD_TYPE"=:B2
"PAPS"."INSTALLMENT_NUM"=1)
4 - filter(4105=:B1)
5 - access("PAPS"."AWARD_CODE"=:B1 AND "PAPS"."PARTICIPANT_UID"=4105 AND "PAPS"."AWARD_TYPE"=:B2)
7 - filter(4105=:B1)
8 - filter("PAPS"."STATUS"='OPEN')
9 - access("PAPS"."AWARD_CODE"=:B1 AND "PAPS"."PARTICIPANT_UID"=4105 AND "PAPS"."AWARD_TYPE"=:B2)
10 - filter("CC_A_P_CURR"."FROM_CURRENCY_UID"= (SELECT /*+ */ "CURRENCY"."CURRENCY_UID" FROM
"EWAPDBO"."CURRENCY" "CURRENCY" WHERE "CURRENCY"."CURRENCY_ISO_CODE"=:B1))
11 - access("SYS_ALIAS_7"."AWARD_CODE"="A"."AWARD_CODE")
12 - access("SYS_ALIAS_7"."AWARD_CODE"="PVS"."AWARD_CODE"(+))
13 - access("SYS_ALIAS_8"."AWARD_CODE"="PALS"."AWARD_CODE" AND
"SYS_ALIAS_8"."AWARD_TYPE"="PALS"."AWARD_TYPE")
16 - filter(TRUNC("PAL1"."LEDGER_ENTRY_DATE")<=TRUNC(SYSDATE@!) AND "PAL1"."ALLOC_TYPE"='IPU')
17 - access("PAL1"."PARTICIPANT_UID"=4105)
filter("PAL1"."PARTICIPANT_UID"=4105)
18 - access("SYS_ALIAS_8"."AWARD_CODE"="PDES"."AWARD_CODE"(+) AND
"SYS_ALIAS_8"."AWARD_TYPE"="PDES"."AWARD_TYPE"(+))
19 - access("SYS_ALIAS_7"."AWARD_CODE"="SYS_ALIAS_8"."AWARD_CODE")
23 - access("CC_A_P_CURR"."TO_CURRENCY_UID"=1 AND "CC_A_P_CURR"."LATEST_FLAG"='Y')
27 - access("PAV"."PARTICIPANT_UID"=4105)
filter("PAV"."PARTICIPANT_UID"=4105)
29 - access("SYS_ALIAS_7"."AWARD_CODE"="SYS_ALIAS_9"."AWARD_CODE" AND
"SYS_ALIAS_7"."PARTICIPANT_UID"=4105)
30 - filter("SYS_ALIAS_8"."PARTICIPANT_UID"=4105)
33 - filter("CC"."LATEST_FLAG"='Y')
37 - access("PDE"."PARTICIPANT_UID"=4105)
filter("PDE"."PARTICIPANT_UID"=4105)
39 - access("OFF_CURR"."CURRENCY_ISO_CODE"="PDE"."OFFERING_CURRENCY_ISO_CODE")
40 - access("CC"."FROM_CURRENCY_UID"="OFF_CURR"."CURRENCY_UID" AND "CC"."TO_CURRENCY_UID"=1)
43 - filter("PV"."VESTING_DATE"<=SYSDATE@!)
44 - access("PV"."PARTICIPANT_UID"=4105)
filter("PV"."PARTICIPANT_UID"=4105)
47 - access("CURRENCY"."CURRENCY_ISO_CODE"=:B1)
Note: cpu costing is off
93 rows selected.
Please help me out...
-Sankar

Query report using LDB MSM

Hi guys,
I'm trying to logical database MSM to report on material master but for some reason the following message appears:
The query specifications cannot be used to generate a list,
i.e. the query will probably not return the list you desire.
If you still want to execute the query, please use the
"Generate" function.
Errors are like this :
Fields from parallel tables within a line
    Line: 01
Field: Post to Inspection Stock
        (MARCV-INSMK, table MARCV)
Field: Item category group from material master
        (MVKE-MTPOS, table MVKE)
Any idea what is the reason why this happens?
Thanks and regards
Stefan
Edited by: Stefan Tzandev on Sep 15, 2008 1:44 PM

Hey Stefan,
I know this is a long shot, but were you able to figure it out. I am having the same problem as we speak. I tried rearanging the fields according to the heirchy, it now works, but has a really bad output. Hope to hear from you.
Best Regards,
Matthew Ong

How to find out where a query is used in a FMS and or Form?

Hi Experts,
How can I find out quickly where a query is used in which fms and / or form?
thx,
Richard

Hi Richard,
Try this:
SELECT T2.FormID, T2.ItemID, T2.ColID,
T1.CatName,T0.Qname FROM [dbo].[OUQR] T0
INNER JOIN [dbo].[OQCN] T1 ON T0.QCategory = T1.CategoryId
INNER JOIN [dbo].[CSHS] T2 ON T2.QueryId = T0.IntrnalKey
ORDER BY T2.FormID
Thanks,
Gordon

Why is this query not using the index?

check out this query:-
SELECT CUST_PO_NUMBER, HEADER_ID, ORDER_TYPE, PO_DATE
FROM TABLE1
WHERE STATUS = 'N'
and here's the explain plan:-
1
2     -------------------------------------------------------------------------------------
3     | Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
4     -------------------------------------------------------------------------------------
5     | 0 | SELECT STATEMENT | | 2735K| 140M| 81036 (2)|
6     |* 1 | TABLE ACCESS FULL| TABLE1 | 2735K| 140M| 81036 (2)|
7     -------------------------------------------------------------------------------------
8
9     Predicate Information (identified by operation id):
10     ---------------------------------------------------
11
12     1 - filter("STATUS"='N')
There is already an index on this column, as is shown below:-
     INDEX_NAME INDEX_TYPE     UNIQUENESS     TABLE_NAME     COLUMN_NAME     COLUMN_POSITION
1     TABLE1_IDX2 NORMAL     NONUNIQUE     TABLE1      STATUS     1
2     TABLE1_IDX NORMAL     NONUNIQUE     TABLE1     HEADER_ID     1
So why is this query not using the index on the 'STATUS' Column?
I've already tried using optimizer hints and regathering the stats on the table, but the execution plan still remains the same, i.e. it still uses a FTS.
I have tried this command also:-
exec dbms_stats.gather_table_stats('GECS','GEPS_CS_SALES_ORDER_HEADER',method_opt=>'for all indexed columns size auto',cascade=>true,degree=>4);
inspite of this, the query is still using a full table scan.
The table has around 55 Lakh records, across 60 columns. And because of the FTS, the query is taking a long time to execute. How do i make it use the index?
Please help.
Edited by: user10047779 on Mar 16, 2010 6:55 AM

If the cardinality is really as skewed as that, you may want to look at putting a histogram on the column (sounds like it would be in order, and that you don't have one).
create table skewed_a_lot
as
   select
      case when mod(level, 1000) = 0 then 'N' else 'Y' end as Flag,
      level as col1
   from dual connect by level <= 1000000;
create index skewed_a_lot_i01 on skewed_a_lot (flag);
exec dbms_stats.gather_table_stats(user, 'SKEWED_A_LOT', cascade => true, method_opt => 'for all indexed columns size auto');Is an example.

Query rule using query variables

Hi All,
I am working on a query rule in SharePoint 2013. I am trying to build a query text using query variables to provide profile based results to the users. The query text which I am using in the query builder is of the following format:
{SearchBoxQuery} CombinedLanguage:{User.PreferredContentLanguage}
but its not taking the user.preferredcontentlanguage value. Has any one worked on similar type of query rules using query variables? Please share your suggestions.
Thanks !!

Hi,
As I understand, you cannot get the user.preferredcontentlanguage value.
1. Make sure you have set the value of query variable {user.preferredcontentlanguage}, it will return -1 if not set.
2. Make sure you search in the right result source.
3. Please check the crawled property mapped to the managed property CombinedLanguage and make sure that there is at least one value indexed by the crawled property equal to the {user.preferredcontentlanguage}.
The article below is about the query variables.
https://technet.microsoft.com/en-us/library/jj683123.aspx
The article below is about the different query variables return different result examples.
http://techmikael.blogspot.in/2014/05/s15e03-query-variables-constant-trouble.html
Best regards
Sara Fan
TechNet Community Support

Linking Access tables, creating a query with using both Access and Oracle

Hello,
I am using 3.0.04.34 version Oracle Developer. I am supposed to create a script/procedure to use both Access tables and oracle tables together. There is an option in developer to copy the access tables into oracle. But it doesn't help me. Because when we updated the access tables
the copied ones are not be updated. How can I created a linked access tables to oracle and create a query with using both access and oracle table together.
I will appreciate if you guys help me. I look forward to hearing from you guys.
Thanks,
Pinar

Pinar,
to be able to query MS Access tables in Oracle you need an additional product, the Oracle Database Gateway for ODBC. It allows you to link any foreign database into an Oracle database using a suitable ODBC driver. You can then access the MS Access tables through a database link based on the Database Gateway for ODBC. This will also allow you to join local Oracle and remote MS Access tables from your Oracle database.
There's a note on My Oracle Support which gives you more details:Document 233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases - For example - DB2, SQL*Server, Sybase, Informix, Teradata, MySQL
And there's also a dedicated Forum: Heterogeneous Connectivity

Querying CGPL_HIERARCHY using RFC_READ_TABLE

Similar Messages

Maybe you are looking for