Question about a light on my router

So there is an orange light on the front of my router! I was wondering what this meant.. It wasn't lit up before today. About 30 minutes ago I upgraded my firmware. Is the orange light a bad thing? The light is to the left of the power light and it has a symbol on it!

No Orange Light is not a Bad Thing ... it is lit up due to WPA security on the router ...

Similar Messages

Question about Time Capsule as primary router

Hi everyone. I'm ready to upgrade my backup drive to take advantage of Leopard's Time Machine. I'm trying to decide between a simple 500 GB firewire drive or spending the extra for the Time Capsule. I have and intel iMac and an older 12 inch powerbook so I understand the advantages of wirelessly backing up my info.
My question is this - in reading reviews, its suggested that I use Time Capsule as the primary router. However, I had AT&T install U-Verse cable and DSL in my house a few months back and it works flawlessly. I'm using the 2Wire AT&T Uverse modem/router as my router. Can I easily make the Time Capsule my primary router without disrupting what is currently a very good network and is it a simple adjustment? Also, if I opt to make Time Capsule part of the network and use my current AT&T router as the primary, will I notice a significant slowdown as some reviews have suggested.
Any help would be appreciated.
thanks
Kory

Depends if you want the fast transfer speed of files. The wireless TC file transfer will be about 8M/sec and ethernet about 15M/sec
Firewire 400 will be about 25M/sec and so will USB2.

Question about TC light

hi
I have recently had to factory reset my TC, and I have resetup up my TC last night and when I powered down my router the Light on the from of the TC stayed green where as before it would flash orange...
My TC is connected to the my router via the WAN port and I have opted to create a new wireless Network that uses my existing DHCP and DNS as per the instructions.
not sure what other information you require
JP

sorted the problem. It appears my status was set to ignore the error of the router being disconnected so the light stayed green.
No idea why it was set to ignore but at at least I know why it didn't change to amber

Curious question about sleep light.

Currently loving my new 2011 17" MBP, it's been completely great, no problems at all.
I'm just curious about one little thing. My sleep light, seems a little dimmer on the right half. Looking at it at different angles seems to make it look "full". I was just wondering if this is the normal?
Like I said, I love the computer, and I don't plan on returning it because of this, I'm simply curious if this is what it's supposed to look like.
I'm thinking perhaps there's some dust or something in there affecting how it looks at certain angles.

I just got the new 15' mbp myself an have had no problems.
Except the issue you have. Although mine seems like its lost lighting on left side. Its very very minor but I can tell, which bothers me becuase I'v paid $2000 for it brand new for a reason (to look brand new).
Have you had problems with it since than?
An also wondering if you could would you exchange it for a brand new one because I do have 14 days to take back?

Questions about traffic light Dial chart.

Greetings,
I want to create a dial chart which will use the traffic light colors to display normal/warning/dangerous. However, I have not found anything about how to do it either at the documentation or threads in the forum. Could anybody who has already done similar things shed some lights here?
Thanks in advance.

Hello,
Yes you can do all of that using the custom css section.
These are the css attributes for the dial charts
text.tic{stroke:none;fill:#000000;font-size:12px;}
line.tic{stroke:#000000;stroke-width:1px;fill:none;}
#dial{stroke:#336699;stroke-width:2px;fill:#336699;fill-opacity:.5;}
#dial.alert{fill:#FF0000;fill-opacity:.5;}
#dialbackground{stroke:#000000;stroke-width:none;fill:none;filter:url(#MyFilter);}
#dialcenter{stroke:none;fill:#111111;filter:url(#MyFilter);}
#dialbackground-border{stroke:#DDDDDD;stroke-width:2px;fill:none;filter:url(#MyFilter);}#low{stroke-width:3;stroke:#336699;}
#high{stroke-width:3;stroke:#FF0000;}
And here is an example page where you can try different css combinations, http://htmldb.oracle.com/pls/otn/f?p=11933:85,
You can use an item value to populate the css section so just use some plsql to create the right css depending on your values.
Carl

Noob question about swicthing port on a router

I am trying to understanding vlan on switch and router with packet tracer 6.
I thought switching port on a router will act as it does on a switch (mine are 2960).
I use a router with 1 WAN port and 4 switching port to emulate my cisco 881 (without wireless). Everything was working good with my 5 switches and 4-5 VLAN..then doing a ping test between VLAN.. I discovered that PC belonging to differents vlan can ping each other on a router - switching port...then i remake a basic scenario and post it here. i probably missed a basis of vlan.
FA 0/0 (the WAN port) is not connected.
FA 0/0/0 are port switching on the rooter.
According to my image...why pc0 is able to ping pc1 as there is not a specific route between them on the rooter...May be it is the C on the left side meanig connected..thought we need a static route to make one network communicate with another if they are not on the same network.

The actual ports you connect the PCs to are L2 ports only ie they are not L3 so they cannot route. But you have also configured L3 SVIs (Switched Virtual Interfaces) on your router and it those that are doing the routing.
An SVI is a virtual L3 interface. So from your configuration where you do a "sh ip int" you can see at the bottom
vlan 10 192.168.0.1/24
vlan 99 192.168.99.1/24
those are your SVIs. If you also look at your routing table it shows entries for both your subnets as directly connected routes with those SVIs as well.
If you do a "sh run" you should see in your configuration something like this -
int vlan 10
ip address 192.168.0.1 255.255.255.0
int vlan 99
ip address 192.168.99.1 255.255.255.0
SVIs are generally seen on L3 switches and as as i say there are not configured on the actual port. The idea is a switch could have say 24 ports in vlan 10 and 24 ports in vlan 11 and then you simply configure SVIs for both vlans and now clients in each vlan can communicate with each other.
So to be precise SVIs are virtual L3 interfaces for a L2 vlan. They act much like physical L3 ports eg fa0/0 from your example ie. you can apply acls etc. to them but they do have differences.
Hope that makes sense.
Edit - to confirm all of the above you can simply remove or shut down one of the SVIs and the PCs should no longer be able to communicate.
Jon

Question about SAP Router Version

Hi All,
I have a question about SAP Rotuer. How can I check what is my sap router version?
I plan to upgrade my sap router to version 23 because It can monitor by windows services.
Does any one know about this ? Please kindly explain.
Thank you & Regards,
Vipu

Go to saprouter directory in command prompt cd :\usr\sap\saprouter
> type saprouter -v
You can see result like below
SAP Network Interface Router, Version 38.10
compiled Mar 1 2010 01:38:53
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n

Question about router WRT54 GL

Good afternoon, I have following problem/question about router: WRT54GL.
I configured the router to operate in my network without any problems except for the following:
When I made tests of speed on computer which is connected directly to the cable from my ISP (ethernet, speed 64 mbit /s during download). When I connected the cable from ISP to the router and router is connected to the PC also using ethernet(from router port 1 to the pc) the speed behind a router decreased to 20 mbit. What I am doing wrong? or is it just a limitation in router's performance?
Thanx for any help
Johny Krekan,
[email protected]

Open the setup page of the router.
Set the MTU to Manual and change the size to 1365.
Save the settings and power cycle the router. Check the speed.
Make sure that firmware on your router is latest.

Question about ERMS push

Hi Guru,
I am prototyping the ERMS push solution in CRM7 and have some questions about the solution SAP help provided.
Below is the detail about ERMS push:
Here the e-mail is first handled by the e-mail pull mechanism: it is converted into a
SAPoffice mail and analyzed by ERMS to find out more details about the mail (like language and certain keywords).
Then the mail (including the additional information from the ERMS analysis) is transferred to the
CMS (Communication Management Software). The CMS determines the appropriate agent team and
dispatches the mail via the push process to an available agent of that team.
Below is the sap help link:
http://help.sap.com/saphelp_crm70/helpdata/EN/0e/6a22b86821468691bd5abb51dfd81e/content.htm
I have below questions about the solution in the help link:
1. It mentioned about the email profile (set the agent inbox as email provider) and I changed the u201Cdefaultu201D profile delivered by sap. I setup the rule policy according to the help and assigned it in the service manager profile. The purpose of ERMS push is to push email to CMS instead of sending to agent inbox using ERMS. Which business role should this email profile be assigned to? Is it IC_agent?
2. The help also mentioned about setup u201CERMS_ACTIONu201D as communication system ID in CRMM_BCB_ADM. Does this ID need to be added in the CMS profile? If so, which business role should this CMS profile be assigned to? Is it IC_Agent?
3. The ERMS uses workflow WS00200001. After the email is pushed to CMS, what status should the workflow be, in progress or complete? Also does it suppose to have agent assigned in the workflow task?
4. After the CMS pushes the email back to CRM, it will be a pop up for agent to accept or reject. Will it create an interaction record once the agent clicks the accept?
It would be great if you could shed some light on this.
Thanks in advance!
Zhi Jie Kong
Edited by: Zhijie Kong on Apr 28, 2011 4:32 PM
Edited by: Zhijie Kong on Apr 28, 2011 4:47 PM

Hello Zhijie,
Let me see if I can help address some of your questions.
1) It doesn't matter which business role you use. You can copy IC_AGENT for example. The important thing is, as Mariusz mentions in this thread, [ERMS email push: problem with CAD and transfer;,your E-Mail profile must be set for E-Mail Provider = 2 (Agent Inbox).
2) No, this ID itself does not need to be added to any business role (as I assume it is hardcoded in the SAP workflow as Mariusz mentions).
3) From what I remember, the ERMS Push emails are not set to complete by the system, and therefore can still get inadvertantly routed to agents! I recommend to have a second rule in your Rule Modeler policy to route the ERMS Push emails to a special, separate queue where you can close them out easily without worrying about them getting assigned to any agents!
4) Yes, the email will arrive like a phone call with the accept/reject buttons flashing (though it will show as an email, not a phone call). And yes, when the agent accepts an Interaction Record will be created by the system automatically.
I hope this helps you!
Regards,
John

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Some questions about a Time Capsule

Hi!!
I just have a few questions about a Time Capsule, but first let me explain the backgroud to my questions.
I live in a 2 floor house(including a basement) and my bedroom is downstairs. My parents currently have a desktop PC connected to our wireless router and our printer. Me and my step-father both have 13 inch MacBook Pros, and he uses the Mac like a basic computer, so the equipment connected to our PC is good for him. I, on the other hand, use my Mac, iPad and iPhone to their fullest potential. I am a SUPER MEGA NERD when it comes to computers, so I plan on making my bedroom an amazing office at the same time. So I want an AirPrint Enabled printer in my bedroom (Under 100$$) along with a Time Capsule to back up my information, because everyday I look around in the backdoor of my Mac alot, and if I jack anything up (And I cant handle the problem) I would like to restore my Mac to a previous version. So here are my questions:
1) My bedroom is right underneath our router, so i get GREAT Wi-Fi in my room. If I get a Time Capsule, can I use it in my room to extend my Wi-Fi, and how would that work? Will it extend my wifi under the same name, because I would like my own Wi-Fi (Titled to what I want with my own password)
2) If I have to create a NEW Wi-Fi network, how would I do that?
3) Would I need to connect my new printer directly to my ROUTER, or could I connect it to the TIME CAPSULE?
If you don't understand what I'm trying to ask (Even though I feel like it's self-explanatory)
ONE question about the PRINTER: Do any of you have any recommendations for an AirPrint Enabled printer under 100$? Even under-150$ would be okay.
THANKS FOR ANY HELP!!!!

everyday I look around in the backdoor of my Mac alot, and if I jack anything up (And I cant handle the problem) I would like to restore my Mac to a previous version. So here are my questions:
Don't just depend on TM.. use a disk image type utility.. either one of the Mac tools, SuperDuper, CCC, Chronosync or even a linux boot cd (if you have a cd/dvd drive still or via usb can boot) a great tool is Clonezilla.. it will do basically any computer, Mac, Linux, Windows.. and since it boots into its own OS can restore a computer in a flash. Then you can add the incremental changes from TM.
1) My bedroom is right underneath our router, so i get GREAT Wi-Fi in my room. If I get a Time Capsule, can I use it in my room to extend my Wi-Fi, and how would that work? Will it extend my wifi under the same name, because I would like my own Wi-Fi (Titled to what I want with my own password)
Actually I am surprised you get good wireless as usually directly above or below a router is often the worst spot. Time Capsule cannot extend the wireless of any other router than Apple.. it is a special system and only Apple can join the club. It has bad effect though, if you set the TC to extend wireless it turns off ethernet ports.. which is hugely dumb.
The best arrangement is ethernet to the upstairs.. or EOP adapters. If not then a wireless router that matches the existing unit will generally be better than mixing apple and non-apple.
2) If I have to create a NEW Wi-Fi network, how would I do that?
3) Would I need to connect my new printer directly to my ROUTER, or could I connect it to the TIME CAPSULE?
You create a new wireless network by selecting manually the wireless channel and use different wireless name, ssid and security. There are 3 available channels on 2.4ghz.. your existing router will use one or two.. depending on if the setting is 20mhz or 40mhz.. so you need to manually set everything and not use auto.
TC is slow on 2.4ghz cf 5ghz and there are many more channels at 5ghz but not everything can use it.. iphone for instance is 2.4ghz only . whereas ipad can use 5ghz.. most full computers now can use 5ghz.
Buy a wireless network printer. Or alternatively an ethernet network would be also ok but now are more expensive than wireless ones. Network printers are not much more than straight USB and work much better.
I do not use airprint so have nothing to offer.. find the best HP model in your budget.. but others may have had more experience.. I use ethernet connected b/w laser business type HP.. they work great.. but airprint is too recent an innovation for me.

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Questions about mac mini iTunes server, streaming to macbook pro, ipads, etc.

I'm thinking about getting a mac mini to work with my NAS as a iTunes server. I have a bunch of questions about this. I will have two iPhones, a few iPads, and a laptop that will be accessing the files. I have iTunes match. This is basically to keep an always on computer for hosting the music/movies. My questions are as follows . . .
#1 Are there any good, comprehensive guides to show you how to do this?
#2 Can the movies be accessed when not at home on the shared network?
#3 Can the iPads or the macbook pro download the shared movies to be stored locally?
#4 Back to #3, how will it work on my macbook pro with listening to music (I have iTunes match)? Say i go to library and I break out my macbook pro and I don't have internet. What happens if I download music while at home onto my macbook pro to listen to it when I go to the library? Will i start a new library on my macbook pro? How will that mesh with the home server when I come back.
#5 Is there a way to mirror files or folders? So something that I have on my macbook pro will also mirror on the home server.
Thanks for your help on this. I'll post any follow up questions.

seanfenton wrote:
1. I want to replace the Optical drive with a 2TB SATA. can I use this 2.5 inch?
I do not know if it is the same model number, but this one will work in your MBP:
http://eshop.macsales.com/item/SEAGATE%20OWC/ST2000LM003M/
2. I want to replace the HD with a 128GB SSD 840. When I replace these drives, will my OS still be in tact? I have never done this job before.
No. You will have to format the drives in Disk Utility>Erase to Mac OS Extended (Journaled) and then install the OSX by using the original install disks.
3.) I want to replace the ram sticks to max capacity. This is 2 2GB sticks, Correct?
No. An early 17" 2008 MBP will accept 6GB RAM with the following specifications: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. The best sources of Mac compatible RAM are OWC and Crucial.
4.) Most difficult...
I want to extend the monitor wirelessly to a projector. I thought about using Apple TV and Airplay. However, support for airplay is for MacBooks 2011 and newer. I thought of using a PS3 and the media server, but I think this brings on a format compatibility issue. (my library is so large I could not afford to convert all my movies to MP4.) So, how would you recommend I put my extended monitor with VLC player onto a projector?
Could I possibly connect the MBP to a Mac Mini as an extension? would this work natively? I would rather use a VGA cord than F with 3rd party app BS.
Cannot help you there.
5..) I want to Bypass iTunes this time around. I would prefer to use Finder and VLC to manage all of my music. I mostly play all my music on shuffle, so, could I create a playlist on VLC with all of my music and play it randomly? (im sure this is possible but i'd like to organize all my plans with confirmation.)
You are not obligated to use iTunes.
6.) Can i upgrade the keyboard to backlit? i've read that this is possible.
All MBPs have back lighted keyboards. Your either needs a NVRAM reset or a repair.
Ciao.

Question about internet security...please help!

Hi everyone,
I have a question about the macbook's internet security.
A few days ago I became aware that my sibling was using a laptop for internet use at my house which he got from a person that I do not trust. He is very computer-savy and we're worried that he may have installed some form of spy ware on that laptop and in turn, may have tried (or succeeded) in accessing my Macbook through some form of spyware. My house is hooked up with a D-Link wireless router, and at the time, it had no internet/access-password.
So my question is, could this person have accessed my computer and personal information remotely by and through the laptop that my sibling got from him. I was under the impression that Mac's have very strong firewalls, but I have also heard that as long as he knew what he was doing, he could have accessed my computer. I don't have a wireless "network" set up at my house, I just simply use the router for internet. But my sibling told me that this guy was his "network administrator" which leads me to believe that he must have had remote access to the laptop.
Can anyone with knowledge on this problem please weigh in and let me know what I need to do to confirm that no one has accessed anything from my macbook.
Thanks!

One option if you want to be extra safe is turning on FileVault (System Preferences -> Security), which will encrypt everything on your computer so that if somehow someone does gain access to your computer they will have a next to zero chance of being able to read anything they get from your computer. You have to have a lot of extra hard drive space on your computer to turn it on though.
Also, a "network" is just a connection between computers, regardless of the internet is involved or not. So when you connect your computer to the router which gives you the internet, you are putting your computer on a network. Now I believe that in order for this person whom you don't trust to gain remote access to your computer, they would have to have more information such as an IP address for your computer, through the router in order to get to it.
One thing I think is very important to consider that isn't on the technical side of things is something called "Social Engineering" which is a form of cracking, or hacking. You can do your own research, but in a nutshell Social Engineering is getting people that have access to something I'm trying to hack to give me information. For instance, this person you don't trust could be giving your brother the computer in the hopes that he will download something through your router to that laptop which could give him IP addresses and other information. And then when he gets that laptop back he could scan it for useful information and your brother wouldn't know he did anything wrong at all. The best way to avoid this is purely education and communication. Even if your brother doesn't share the same suspicions about this person, surely he will understand the need to be careful and smart when it comes to sharing personal information in the digital world.

Question about a light on my router

Similar Messages

Maybe you are looking for