Question about Auto upd

How do you remove auto update from my system.. w98
John

John,
Auto update is run when you're on that particular part of the website, it then goes and detects which product you have. I'm not sure what you mean by removing auto update though, if it's not something you want to avail of, just don't click on the link to go to the auto update page.
Cat

Similar Messages

  • Question about auto packing

    Hello,
    as i saw the post about auto packing in delivery
    the config steps are described as follow
    1) Create the packing Material In MM01 of material Type 'VERP'
    2) Create packing Instructions from TA: POP1
    3) packing Determination in POF1 ... for MM Condition type is RCPT and for SD its is SHIP. So create condition records here.
    4) In Customization SPRO-> Logistic Execution-> Shipping-> Deliveries->Define Delivery Types
    In Delivery, there is Check box for automatic packing.
    First , i tried to create condition value in POF1 for SHIP as condition type and put my Packing instruction e.g. 233 into it.
    but it wont work in my delivery e.g. LF.
    secondly I tried to create in POF1 for ZVPA, with my Packing Instruction 233, and then it works in my delivery.
    So my question is, the condition type for HU/ Auto Packing, how are they connected to my documents/ processes e.g. I use OR as sales order, and LF as delivery.
    in the Picture below, i can see both condition type SHIP and ZVPA are using SHIP as acc.sequence. So which condition would be used when I create my delivery ? and how to configure that?
    Thanks!

    Hi,
    this defined in custo:
    Click on maintain packing transaction profile and the select for instance 0002 Outbound delivery
    Here is defined what procedure determination will be used in entry field Determ. proc. for pkg intrs
    Then you define for this procedure what conditions will be available
    Select the procedure determination you defined in previous step and you maintain the conditions
    If reply answer your question close discussion <Text removed by Moderator for point begging. In addition to that discussion is unmarked as question, as this is encouraging point gaming and lobbying for points. Even both OP & "Star" contributor ignored Moderator comments. You both are advised to review SCN RoE and adhere them in your future conduct.>
    Regards,
    JM
    Message was edited by Moderator: Jyoti Prakash

  • Question about: Auto PO generation for third party sales order

    Hi all,
    Not sure if this is the right place to leave this question but giving a shot.
    In Sales Item category we have a check box called generate auto po. By reading the help i came to know that it generates PO and/or Purchase Requisition automatically on saving the Sales Order. It is also said that we need to make some ALV setting. Can any one lead me how to configure the setting,so that i can be successful in knowing about Third party Orders.
    Thanks & Regards
    Mukund

    Hello Mukund
    It is talking about ALE- Application Link Enabling - not ALV. That is if you have distributed applications and use ALE to communicate between them. I don't think you need to do anything else. Just go ahead and test it. And if your MM Purchasing master data is set up correctly, you should be able to see the message about PO creation when the sales order is saved.

  • Want to upgrade to Mountain Lion, but CS6 questions about Auto-Save need answers...

    Hi,
    I'm on Mountain Lion for all my "non-critical" work, but I'm still running the latest Snow Leopard on my main desktop machine, running CS6 Design & Web Premium. I've avoided the switch primarily because of the auto-save feature that Apple placed into ML. I haven't found a satisfactory answer anywhere on the web to this basic question...is auto-save a problem, as Apple implements it, with CS6 and working on images?
    In particular: 1. I work on very larger files, 4GB+ in size regularly, and I don't wan't the peformance hits associated with constant saving, 2. I make changes to images, downsizing them, croping, color corrections, etc. so that I can make jpg proofs for clients or myself. These are more "intermediary" images and not intended to be saved. I don't want to downsample an image, flatten it to creat a jpg for proof and have it overwrite the original image layered, high res by mistake. Does this happen with photoshop, or does Adobe avoid the auto-save that Apple uses?
    I have all the latest iOS gadgets and it's becoming quite cumbersome managing multiple sets of iCloud info, etc. without being on ML. I'd like to make the switch, but at the cost of losing work, etc. Can someone with experience on ML & CS6 give me any input in the matter? And, does this also apply to all the other Adobe apps in CS6? I'm constantly making minor changes and edits that I usually "undo" out of and don't want saved.
    Thanks.
    Craig

    So, in other words, photoshops behavior works the same, using save as..., etc. as it did under Snow Leopard? I should expect the auto-save behavior that occurs in apps like iPhone, etc., where i can actually lose the original because of the constant backups, etc.?
    Thanks.

  • A question about Auto Save, Versions and Preview.

    I haven't upgraded to Lion (yet?). I'm trying to understand what impact Lion will have on my workflow.
    Do I understand right that it is not possible to turn off Lion's Auto Save?
    And that the autosavings are stored in a hidden sqlLite data base?
    I use Preview for... err... previewing files (PDFs and image files). Nothing I open (preview) in Preview I save.
    Is Lion's Auto Save going to save every file I take a look at in Preview?

    Thebestplacehere wrote:
    I think is more a pro than a con to upgrade ..
    The idea of Versions looks good to me, it certainly is not a 'con to upgrade'. The amount of disk space it uses and where (on which disk) is a bit of a concern to me. But by the time the applications I work with implement this feature that probably will be sorted out.
    there's more to upgrading though.
    Not so much on topic:
    I do want to upgrade. Eventually. Although I do worry about the direction Apple are heading in, I don't want to get stuck in the past.
    I'm disappointed AirDrop is not for my computers. And the treatment Spaces and Exposé got really withholds me of upgrading any time soon. Maybe a third party developer dives into this matter. Working with an external display connected to notebooks has changed in Lion and is not particularly handy for everyone. (While using the external display only, opening the lid of the notebook in Lion turns on the display of the notebook. This was not the case before Lion.)

  • I accidetally hit the brightness button -Question about Auto brightness....

    I leave my display settings on "Automatically adjust screen as ambient light changes" which works in conjunction with the keyboard illumination.
    My question is, I accidentally hit the "Brightness Decrease" button often, the button directly above the ONE key. I was wondering,... How does that affect the automatic features?
    I noticed that the brightness never seems to go above about half way on the meter in the displays control panel, Do I have to adjust the brightness to full intensity to give the display more "Automatic" Range?
    It seems as if since I hit the decrease button, no matter how bright or dim a room is, the display never goes about the half-way mark.
    I know this is a weird question, but I really apprciate your opionon / information relating to this,
    -Rob

    (I do not know all that much on this topic, but) I believe that when you hit the brightness button, the automatic adjustment turns off. To reactivate it, you can restart your computer (obviously), or, I noticed that the automatic kicks back in when you unplug/plugin your computer.
    That's about all I know.
    I can experiment with more things if you want, just let me know. And I was curious, how do you keep accidentily hitting the brightness button?
    Peace
    Bweb

  • Quick question about Auto-lock settings

    Hello all,
    I recently was able to sync my office email account to my iPhone using Microsoft Exchance active sync. The problem as I understand from searching through different posts, is that I can no longer set my Auto-lock setting to "Never" because of this, only 5 minutes (sort of a security thing as far as I can tell).
    The reason I am trying to do this is that I like to use one or two of the GPS golf apps out there, and they stay dialed in if the phone doesn't "sleep" while I am playing a round, so I would like to keep it on the entire time.
    Does anyone have any ideas of how I might be able to work around this issue in any way?
    Responses are, as always, much appreciated!
    Cheers,
    Kev

    More than likely, you could not simply delete the account. The thing is that the people who came up with the security protocols already thought of that. As an employee using a company cell phone, I could delete my account, access features or information my company restricts and then readd the account, thus bypassing security protocols.
    In addition, I might have other sensitive company information (in the form of contacts, documents, notes, etc) that would still be on the phone even if I delete my exchange account. Without autolock, people would still have access to this data even if I delete the account.
    To prevent this type of abuse, when an exchange account is added, it installs a set of restrictions and protocols to the phone. Those protocols can, at the discretion of IT, be non alterable and non removable, even when the exchange account is deleted. This prevents people from abusing the loophole you are describing.
    Similarly, simply switching to another email account will not bypass them - these protocols are now part of how your phone acts and can not be changed without wiping it back to factory settings.

  • Question about auto-saving multiple files with the same template

    Is there any way to do this? The template will never change - but I will need to save it as a new file each time I open it. Just want to know if there is an automatic way to do this when the template is opened each time? Preferably numeric, starting from any number. I suppose I can just save each file myself - but as it gets up into the thousands of files - I'm not going to want to.
    It would be really cool if it could auto-save the file, assign it a number, and then place that number in the top corner of the saved document.
    If anyone can help - let me know. C.

    OK. First add a text field to the document, say "text1". You probably want it to be read-only. You can duplicate it to all pages if needed. Then open the template document, open the interactive JavaScript console (Ctrl+J), and enter the following code:
    // Interactive Console JavaScript
    // Get the folder this file is in
    var folder = path.replace(documentFileName, "");
    // Save multiple copies (from 1 to 9)
    // with the number in the text field
    for (var i = 1; i < 10; i += 1) {
        getField("text1").value = i;
        saveAs(folder + "template" + i + ".pdf");
    After you paste the code, highlight the lines and press Ctrl+Enter (or the Enter key on the numeric keypad) and Acrobat will save multiple copies to the same folder as the template. Replace "text1" with the name of the field you've set up and "template" with the name you want the copies to have before the number.

  • Question about "Auto Qos Voip Trust" on 3560X

    Hi,
    I applied command "auto qos voip trust" to the uplink interface.
    But I found that the interface shown command "auto qos trust" was applied when i show running-config.
    Could the command "auto qos voip trust" show in the configuration after i applied?
    If not, how can i check the interface that applied "auto qos voip trust"? Thanks!
    James Lai

    No.
    After i aplied "auto qos voip trust" to the interface Gi1/1
    When i show running-config, that shown asa below:
    interface GigabitEthernet1/1
    srr-queue bandwidth share 1 30 35 5
    priority-queue out
    mls qos trust cos
    auto qos trust
    I found that the interface configured as auto qos trust but not auto qos voip trust.
    Is the command "auto qos voip trust" no applied to the interface Gi1/1?
    How can i apply auto qos voip trust to the interface? Thanks!

  • Question about Auto Save and Versions

    Hi. I'm running the latest version of Yosemite — 10.10.2
    My Mac seems to be auto-saving documents, but when I click the down arrow on a document's title, I don't see the options to "Revert to Last Saved Version" or "Browse All Versions."
    Since the documents are being auto-saved, I would like to have the option of reverting and browsing saved versions. Does anyone know why I'm not seeing those options?
    Thanks!

    Glad that helped!
    Yes, I believe the way you described indeed worked in previous versions of OS X.
    Enjoy your Apple gear.

  • Question about auto populate holiday hours in timecard

    How to configure timecard so it will populate the holiday hours automatically when the person create new timecard and for that period there is holiday?
    As I know this will only work when using auto generate timecard feature to generate the timecard and the employee assignment time autogen timecard is set to yes.
    thanks in advance.

    Hi What you need to do is when you define your holiday calendar make sure that you enter number hours against the holiday you define
    In the assignment time information you should set the Autogen to Yes, and attach the rotation Plan to the assignment time info.
    Now when you create the time card select the Work schedule template form the Template LOV and click apply you should be abel to ge the number hours for that holiday.
    If you are not getting then you may need to check the family pack, I believe this functionality is available only after the Family J(you need to confirm the family pack from the metalink)

  • Question about auto scoring

    Do I need to purchase new reports for my mortgage,auto,credit card scoring models to change

    Tomgon1981 wrote:
    Do I need to purchase new reports for my mortgage,auto,credit card scoring models to changeFor the credit cards, if you have an alert it will show you if there is a change and give you the new score.  For the mortgage and auto you need to buy a fresh report if you want to see a change.

  • Question about AUTO COLOUR

    Is there a way to freeze auto colour? So I can apply it and it dose its thing but then it uses a static value for the rest of the tiem it is applied, insteda of recaculating all the time... as this produces a flickering?

    is there a way to remove it from a single footage file that has been cut up in the time line in to many sections? and replace it with a manual one?

  • Question about Auto Loan...

    I've had 5 auto loans in my life (in the last 17 years, 1 used, 4 new) all has been paid on time, never late, never repo. I filed for BK7 in April and discharged last month including my auto loan which I still pay for (It's almost paid off). I wonder if Bank use credit score and/or auto score? I mean I never heard of Auto score before someone brought that up which is different. How does that work exactly?Thanks y'all

    From what I understand the auto versions of FICO weighs past auto loans more than say your FICO 8 score.  So the better your auto loans are on your reports, paid, no lates, no repos, then your auto score should be ok.  If you're shopping for a new auto loan, some banks may use the auto version and some may not.  Also there are different versions of the auto score.

  • Question about auto spliting events?

    I was wondering if pictures are automatically split depending on photo date for photo files imported from HD opposed to from the camera?
    When I updated iphoto 8 from 7 (or 6 can't remember) I have some events that show multiple dates in an album when I selected events to be split for each day.
    Does this mean that events will be split on the days that I import them or also depending on the dates in the photos?
    thanks

    But there is a preference in iPhoto '08 to split imports into multiple events based on time, using the date saved in the camera. So if that pref is set, iPhoto would create an Event for last month and a different Event for last week, unlike the photo lab.
    But that is for new imports--I had named all my film rolls in iPhoto '06, and iPhoto '08 transformed the rolls into Events but did not otherwise change them, so that my older Events do have photos from various days, which I had combined. The same thing may have happened to Dorian. However, Dorian, there is a difference between using File | Import to get photos from your hard drive, and upgrading an existing iPhoto Library. iPhoto may treat these two situations differently.

Maybe you are looking for