Question about Canvas in MIDP 2.0

HI ALL
Can anyone tell me, is the function setFullScreenMode(boolean b) work
on all phones wich support MIDP 2.0?
I can only try on Nokia, Samsung, SonyErocsson
Thank you.

It doesn't work on SonyEricsson P900
The canvas size will be untouched with the same resolution 208x253.
On SonyEricsson P910 you may call setFullScreenMode after first paint is over only. If not you will get an exception.

Similar Messages

A few questions about Canvas and other Image related stuff.

I am just starting to play around with Canvas in the hopes of using it to make a little game (not an applet) in my spare time. I have gotten a ball to bounce around the screen and switch colors when it bounces without too much work. (hooray for me!).
I was wondering:
1) If you always have to repaint the whole area of the canvas, or can you repaint sections of the screen?
2) Can there only be one canvas per frame, or if you can have more, like say, one for each sprite (I tried in my own simplistic way but the second canvas overrode the first when I added it to the frame) or do you have to lay out all the sprites in one canvas every time before you paint?
3) Is Canvas the best platform for rendering my animations and doing collision detection, or are other ways of presenting the images better? By better I mean lower usage of resources, higher speed, accessibility of events that occur. (I have read in the mindprod java glossary "[Canvas] receives all the raw mousing events. Panels, in contrast, see only a few.")
4) In a call to paint which tells it to display some images which are much larger than the frame the canvas is in, is time and effort spent working on those pixels that aren't displayed or does it take about the same amount of resources as for images that fit in the frame since the same amount of picture is actually displayed?
5) Is there any convenient way to layers with canvas besides just controlling the order in which the images are painted. (I will admit I haven't searched for this information yet, because I just thought about it.)
6) Is there any other information you guys would care to bestow on me?
If any of this question is ridiculous, obvious, ignorant or any other negative adjective, then I apologize. I will continue messing around in the meantime.
Thanks
--John

Okay, well I got it to work by drawing them both to the same canvas. duh I guess.
Can you have more than one canvas in a frame? How do you set the size if so.
How do I implement the z-order? I thought of doing it manually by sending the paint method a list of objects to paint and manually managing the order of that list. Would that be an acceptable way to do it?
Should I only be trying to paint to one canvas? What I would like to do is have several canvases with transparent backgrounds so that I can draw different layers in the same frame. That way flying stuff would be painted on a different canvas than stuff on the ground, and then putting it all in a frame would tie the pictures together into a scene. Kind of like how they do distance in animation by having different layers of drawings on clear plastic that they can move at different speeds to give the illusion of depth.
Any advise? Sorry for the douba-post
Thanks
--John

Basic questions about programing for J9 VM

I need to create a java application to run on a Pocket PC 2003 OS and I'm limited to using IBM's Websphere J9 Virtual Machine. I'm new to using java in this capacity and therefore have lots of questions which I'm guessing are pretty basic. Despite my best efforts, I've found very little to help me online. Below are a couple questions I have that I'm hoping someone can help me with. Even better, if you know of any resources that could help me with these and other questions, I'd love to have them. Thanks in advance.
1. I'm using standard AWT for the GUI but I'm having problems getting frames, dialogs, etc., to come up in anything less then full screen. setSize() and resize() have no effect, even if I extend the frame and override the setMinimumSize, setPreferredSize, setMaximumSize methods. What do I need to do to get a child window to appear in something less than full screen?
2. I'd like to be able to add menu's to the buttom toolbar (with the keyboard) but have no idea how I would add something to it. Can someone point me in the right direction?
3. When my application gets an iconified event I go ahead and call a System.exit() to exit the application. This doesn't kill the java VM though, which continues to run in the background (taking up plenty of memory). If I run my application using the J9w.exe so that it runs without the console, then not only does the VM continue to run, but I have no way to stop it (the running program list can't see it). Since each time I run my application it starts a new VM, it only takes a couple of times before I'm out of memory and have to do a soft reset of the PDA to make things right. Can I kill the VM when I kill my application?
4. I learn best by looking at example code, but have been unable to find any code people are running on J9. I have the GolfScoreTracker installed and running on my PDA, but the jar file contains only the classes. Since it's supposed to be a demo, I had hoped that the source code would be included, is that hoping too much or is the source code available somewhere? In addition, if you know of any applications out there with available source code that are known to run well on a PocketPC J9 environment I'd appreciate the link.

Hi there, I saw your questions, im currently developing a java pocket pc application as well and here's what i go so far:
AWT seem to be hard to use on pocket pc, instead i recommend that you use SWT, which is a technology developed by eclipse. It's already installed on the eclipse plugins, you just need to download the jar and dll files for the pocket pc. They are available at: http://www.eclipse.org/downloads/index.php
I assume that you already have the J9 working on your device. So you only need to copy the SWT.jar file and the swt-win32-3064.dll to the folder containing the .class files on your device.
Now, on your java IDE(im using eclipse) Add the SWT.jar library to your project which should be on C:/eclipse/plugins/org.eclipse.swt.win32_3.0.2/ws/win32/swt.jar or something like taht depending on your eclipse root.
Now you are ready to code some SWT, here is a sample program from Carolyn MacLeod, i modified a few things so it could run on the pocket pc but it's almost the same. Once you coded in eclipse run it, then copy the class file from your desktop to your device(There should be like 4 or 5 classes like sample.class, sample$1.class etc. copy all of them) where you put the jar and dll files(If program does not run you may try to rename the dll file for swt-win32-3050.dll instead of 3064.dll). Now after you have everything set up you need to create the lnk file in order to run the program. On your desktop create a new textfile and write the following on it:
255#"\Archivos de Programa\J9\PPRO10\bin\j9w.exe" "-jcl:PPRO10" "-cp" "\My
Documents\Java\swt.jar" ;\My Documents\Java" sample
Paths depend on your install, and the place where you put your classes and jar file. path for j9w is usually "\Program Files\J9\PPRO10\bin\j9w.exe", and the last word should be the classname.
Currently this form only displays an image on a canvas, click on the browse button and choose a pic and it will display on the canvas. Im trying to connect the form to an oracle database but no success yet on the device.
Hope it helps, if you have any questions about the code or something, and I know the answer, please feel free to ask.
See ya
import org.eclipse.swt.*;
import org.eclipse.swt.widgets.*;
import org.eclipse.swt.layout.*;
import org.eclipse.swt.events.*;
import org.eclipse.swt.graphics.*;
public class sample {
static Shell shell;
static Display display;
static Text dogName;
static Text textdb;
static Combo dogBreed;
static Canvas dogPhoto;
static Image dogImage;
static List categories;
static Text ownerName;
static Text ownerPhone;
static String[] FILTER_EXTS = {"*.jpg"};
public static void main(String[] args) {
display = new Display();
shell = new Shell(display, SWT.RESIZE | SWT.CLOSE);
Menu menu = new Menu(shell, SWT.BAR);
shell.setText("Dog ShowS Entry");
shell.setMenuBar(menu);
GridLayout gridLayout = new GridLayout();
gridLayout.numColumns = 3;
shell.setLayout(gridLayout);
new Label(shell, SWT.NONE).setText("Dog's NameS:");
dogName = new Text(shell, SWT.SINGLE | SWT.BORDER);
GridData gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
gridData.horizontalSpan = 2;
gridData.widthHint = 60;
dogName.setLayoutData(gridData);
new Label(shell, SWT.NONE).setText("Breed:");
dogBreed = new Combo(shell, SWT.NONE);
dogBreed.setItems(new String [] {"Collie", "Pitbull", "Poodle", "Scottie"});
dogBreed.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
Label label = new Label(shell, SWT.NONE);
label.setText("Categories");
label.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
new Label(shell, SWT.NONE).setText("Photo:");
dogPhoto = new Canvas(shell, SWT.BORDER);
gridData = new GridData(GridData.FILL_BOTH);
gridData.widthHint = 60;
gridData.verticalSpan = 3;
dogPhoto.setLayoutData(gridData);
dogPhoto.addPaintListener(new PaintListener() {
public void paintControl(final PaintEvent event) {
if (dogImage != null) {
event.gc.drawImage(dogImage, 0, 0);
categories = new List(shell, SWT.MULTI | SWT.BORDER | SWT.V_SCROLL);
categories.setItems(new String [] {
"Best of Breed", "Prettiest Female", "Handsomest Male",
"Best Dressed", "Fluffiest Ears", "Most Colors",
"Best Performer", "Loudest Bark", "Best Behaved",
"Prettiest Eyes", "Most Hair", "Longest Tail",
"Cutest Trick"});
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_FILL);
gridData.widthHint = 60;
gridData.verticalSpan = 4;
int listHeight = categories.getItemHeight() * 12;
Rectangle trim = categories.computeTrim(0, 0, 0, listHeight);
gridData.heightHint = trim.height;
categories.setLayoutData(gridData);
Button browse = new Button(shell, SWT.PUSH);
browse.setText("BrowsePic");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
gridData.widthHint = 60;
browse.setLayoutData(gridData);
browse.addSelectionListener(new SelectionAdapter() {
     public void widgetSelected(SelectionEvent event) {
          FileDialog dialog = new FileDialog(shell, SWT.OPEN);
          dialog.setFilterExtensions(new String[] {"*.*"});
          String fileName = dialog.open();
if (fileName != null) {
dogImage = new Image(display, fileName);
shell.redraw();
Button delete = new Button(shell, SWT.PUSH);
delete.setText("No action");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_BEGINNING);
gridData.widthHint = 60;
delete.setLayoutData(gridData);
delete.addSelectionListener(new SelectionAdapter() {
public void widgetSelected(SelectionEvent event) {
Button enter = new Button(shell, SWT.PUSH);
enter.setText("No action");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_END);
gridData.horizontalSpan = 3;
enter.setLayoutData(gridData);
enter.addSelectionListener(new SelectionAdapter() {
public void widgetSelected(SelectionEvent event) {
     shell.open();
     while (!shell.isDisposed()) {
          if (!display.readAndDispatch())
               display.sleep();
     display.dispose();
if (dogImage != null) {
dogImage.dispose();
}

Maybe a simple question about M2T ?

Hi
I record in HDV on the JVC GY 101.
I store on the Focus Enhancements DR HD100 Hard disk recorder.
The footage I have is in HDV 25frames Progressive.
The hard disk stores as m2t file and I seem to need to use Mpeg streamclip to convert for Final Cut Pro HD.
I have a few questions about this.
1) What should i convert to with mpeg streamclip ? mov, dv m2v etc etc
2) What setting should I have on FCP with regards to screen size ? The converted clips are 1280x720. When I choose this setting on the sequence, I end up with small black bars left and right of the video on the canvas ???
3) I will also later have to add some digi beta footage which will be PAL, 720x576 Anamorphic.
4) What is the best resolution for me here ?
5) And will the quality of the original m2t file be downgraded by the mpeg streamclip ?
Thanks so much for your help
All the best
Simon

HDV isn't an "edit-friendly" format, meaning: HDV uses inter-frame compression, combined with a long group-of-pictures (GOP) of 15 frames (12 frames in PAL-equivalent). In intra-frame compression (as in DV, DVCPRO HD, etc.), each video frame is a complete image that stands alone. Inter-frame compression (which is also used in DVDs) uses only a limited number of complete image frames, the GOP determines that number. So, in HDV for example, with a GOP of 15 frames, 1 second of 30fps video contains only 2 complete frames, while the other 28 frames are determined by calculations used in conjunction with the Bi-directional ('B') and Predicted ('P') frames, which contain partial information on the changes in the video in between the 'I' frames which contain whole images. This process, of course, requires much more computer processing power than when editing DV, DVCPRO HD, Uncompressed, etc.
Editing video streams such as HDV (and XDCAM HD) is made difficult by the reduced number of I-frames. For example, if you make a cut in between the I-frames in the video clip, the computer has to then recalculate new I-frames that are placed at both sides of the cut. Converting on capture/after import to an intra-frame codec like DVCPRO HD, ProRes 422, or Uncompressed will reduce processing power and increase real-time performance, as well as give better performance when adding effects and performing compositing like chroma-keying.
A common rule of thumb in professional applications is to acquire in HDV, XDCAM HD, etc., but capture and edit in DVCPRO HD, ProRes 422, or even Uncompressed. Native HDV editing is not taboo by any means; it's just not as easy or robust -- especially with the LONG render times. Depending on what kind of work you do (and of course personal preference), you may not see much benefit by transcoding to another format.
Are you suggesting i have to convert each clip after capture?
Unless you have an HDV deck with HD-SDI and a capture card, you would have to convert each clip. Batch-conversion would be very useful for that.
Hope that helps.
tim

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Questions about using Bitlocker without TPM

We currently use Bitlocker to encrypt our Windows 7 computers with TPM. Now we are looking at encrypting some Windows 7 computers without a TPM. I see how to change the group policy setting to allow Bitlocker without a TPM. I have looked at a lot of other
threads and I have a few questions about how the Bitlocker without TPM works.
1) I see a USB drive containing a key is required for Bitlocker configurations without a TPM, say the end user loses this USB drive, what are the recovery options for their computer?
This article seems to indicate that without the USB drive connected, you are unable to even access recovery options http://blogs.technet.com/b/hugofe/archive/2010/10/29/bitlocker-without-tpm.aspx
We have recovery backed up to AD when Bitlocker is enabled, but how could we do this recovery on a computer on computer where it's USB is lost? Would we have to remove the HD itself and attach it to another computer to access?
2) After enabling Bitlocker on a computer without a TPM and using the USB Drive for the key, is there a way to also add a PIN or password protection at bootup?

Hi,
Sorry for my dilatory reply,
Configuring a startup key is another method to enable a higher level of security with the TPM. The startup key is a key stored on a USB flash drive, and the USB flash drive must be inserted every time the computer starts. The startup key is used to provide
another factor of authentication in conjunction with TPM authentication. To use a USB flash drive as a startup key, the USB flash drive must be formatted by using the NTFS, FAT, or FAT32 file system.
You must have a startup key to use BitLocker on a non-TPM computer.
From: http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_Key
For more Q&A about BitLocker, you can refer to the link above.
hope this is helpful.
Roger Lu
TechNet Community Support

Questions about Rooting...

Hi everyone, I’ve some questions about rooting my Xperia Arc S. Hopefully I’ll get helpful answers from you.
If I root my phone, shall I get regular software official updates from Sony?
Currently Sony is rolling out the ICS update. After rooting the phone am I able to upgrade my phone to ICS?
While rooting the phone if any damage is done, can that be recoverable by installing a fresh OS or something?
Does the rooting process delete all the existing contacts, messages, apps etc?
Finally can anyone please provide a full proof guide/tutorial for rooting the Xperia Arc S?
Thanks in advance.
Solved!
Go to Solution.

Do you have an app named Super USer ?
Were you on 4.0.4 and then rooted your mobile using this method ?
If yes then your mobile is not rooted for sure
See how to root 4.0.4 here
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Question about Canvas in MIDP 2.0

Similar Messages

Maybe you are looking for