Question about Disable Step Task Sequence

Hello guys,
I have 2 doubt about my scenario, I hope you help me.
Scenario1
I want deploy SO Windows7, I have only one partition.
If a disable step: Apply data image1 my deploy ocurred with sucess.
But if no disable step I saw up, ocurred error 0X8004005.
My question so: Why is
mandatorily I
disable this step?
Print1 Partition Disk0
Print2 Apply Data Image
Thanks any idea.

It seems the answer has been staring us in the face this whole time.
In the above image you posted previously, you are clearly applying an image that, from the title, contains an OS despite the warning below the selection box stating that this image
can not contain any operating system.
The apply operating system task sequence step is for applying any WIMs involved with OS or boot partitions. The apply image step should only be used if you had data partitions that you wanted all machines to have, for instance raw storage sections with company
specific data on it. I have never seen it used but I can imagine where it would come in handy.
I would recommend replacing all of those steps with the appropriate task sequence step.
I also recommend you stop using hardware specific WIMs, as it seems you are using based on the title
WIN7HP8200... above. You should be able to go fairly hardware independent with the WIM and only apply drivers to the Task SEquence based on hardware detected.
Dustin Estes - MCP | www.dustinestes.com

Similar Messages

Disable SCCM Task Sequence Using WMI

Hello everyone,
So I'm attempting to use WMI/SDK to disable a task sequence. I've dug for a method to do it, but am not having any luck. I am aware of the Disable-CMTaskSequence Cmdlet, but I really wanting to find the WMI method, assuming one exists.
I've used the WMI Code Creator to browse the classes with methods and of the 99 available, I can't find any that seem to fit.
If anyone has any ideas where I might look, then that would be great. If not, I'll integrate PS into my solution, but I was hoping to keep everything to using .Net/SDK/WMI without any PS integration.
Thanks!

Hi,
I don't understand why you don't want to use the cmdlet?
I'm not a big fan of the native cmdlets either, but when they work, they do save you a lot of work going the WMI route.
If, for whatever reason, you really want to use WMI, then have a look at SMS_TaskSequencePackage. You have to then change the property ProgramFlags via a bitwise operation. In this case it's Bit 12.
Don't try to hardcode the value, that might work, but is a wrong way to go. Have a look at one of my previous articles where I show a similar thing on SMS_Program :
http://www.david-obrien.net/2014/01/24/convert-configmgr-applications-packages-powershell/
Hope that helps!
My blog on ConfigMgr automation: www.david-obrien.net | me on Twitter: @david_obrien Please remember to mark the post(s) that helped you resolve the issue (even if it was your own)

Disable a Task Sequence step

If you disable a step will it still check for the package content during an image drop?

The answer is no. It won't.
Test it yourself. Choose a task sequence and look at the References tab below. These are the objects required by the task sequence and must be available on a DP. Now disable a step containing a package. See that the package disappears from the References
tab. It is no longer required content.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Is it possible to disable Mandatory Task Sequence Warning Message ?

Hello,
When I deploy a mandatory OSD task sequence, the client pc's receives the request, however, a "Mandatory Task Sequence" messages appears saying that the OS deployment will commence in 180 seconds.
Is there an option to disable this warning or reduce the timeout value of 180 seconds ?
Thanks
Imran
Imran

Hi,
The following thread might be helpful, although it is for SCCM 2007.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/da7b304b-457e-4fff-bcb9-d40ceb0675ec/configuration-manager-mandatory-task-sequence-warning?forum=configmgrosd
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Information About Session , Steps , Task

Hi ,
After execution of any scenario - I want to Insert / Update the session ID in target table for each record.
Let's say 100 records are updated and 50 are inserted today as result of execution of any IKM.
now I want to update session ID on all these inserted and updated record. What's the preferred way of doing it?
Secondly - If it's updated / Inserted as a step / task of IKM - should I update Task ID / or session id ?
Cheers

Hi
You have 2 ways :
1)
In your target table, create a field that will contain this session ID.
You have the choice :
* only 1 field : it will be updated if needed
* 2 fields : 1 for the insert row, 1 for the update
In your interface, mapp the field(s) with the following mapping :
<%=snpRef.getSession( "SESS_NO" )%>
(if you have 2 fields, beware of the insert/update flags)
2)
You can also modify your IKM to do it automatically :
* create an option in your IKM that will receive the name of the column
* in the "insert new rows" step and the "update row" step, add <%=snpRef.getSession( "SESS_NO" )%> at the end of the statement

The ubiquitous question about disabling the "AUTOMATIC pixel aspect ration correction"....

So many people ask the question, "How do I disable the automatic pixel aspect correction" in photoshop only to get repsonses that include the manual step at turning off the correction for the current photo you're working on. Further details are also given from time to time on how this "shouldn't be a problem" or "it's only because you took a video screen grab", or even better, a debate over how it occaisionally helps. Here's the thing, it doesn't help as often as it creates an annoying step in having to go and turn it off when you open pictures that CS5 determines "need fixing" when in fact, the image becomes distorted by this automated fix, especially when this happens so much more now with cell phone pics, and as you turn off the "Auto correct" the image is no longer distorted. It is indeed RARE that this feature does anything good, and way more often that it shows a preview that is way out of whack. Why would Adobe decide that they can't compile Photoshop with this being something you can disable and only turn on for the photos you want as you open them instead of making you turn them off for when you don't (which is the more often case)? Why has this question circulated since at least CS2 on Adobe forums, and yet never been addressed any further than half hearted attempts at describing "recorded macros/steps/automations" that don't work? If I can set a default scratch disk, surely I should be able to set my default action upon opening a photo to NOT auto-correct anything? If the guys who put Photoshop together don't agree and think "We must autocorrect everything these fools are opening", perhaps we can be allowed enough rope to hang our selves with square pixels anyway and learn our lesson the hard way? Please?

Hi Darrell,
You've posted in the AIR forums and I think you meant this for Photoshop. Would you mind reposting over there?
Thanks,
Chris

Help me with some question about Worker/Service/Task in JavaFx 2

I have read some articles in the forum adout mutithreading in JavaFx2, and now I know if I want to do some long-run jobs, i should use Service/Task.
But my application needs a function like this:
1. here is a long-run job(something like getting data from database or other resources);
2. If I clicked a button, then the job started and get the data.
3. When the job is done, I show the data in the tableview of my JavaFx application.
4. then the job waiting some random time(such as 100 seconds).
5. then the job started again automaticlly.
so, the steps are 2->3->4->5->3->4->5->3->4->5->........
so, the important things is that the job runs many times automaticlly.
I know I should implements the job as a Service or Task in javaFx, But where should I put my "while(true){ job.start();sleep(random_time);}" loop code to make the job start automaticlly after some random sleep time.
I wonder what is the best practice for this use case.
My english is poor, but i hope you can understand what i'm dealing with.
Thank you very much!
Edited by: user9529194 on 2011-12-18 下午8:20

Hi,
Based on the response from John,
I think you can acheive the functionality as below.
// Creating the tableview.
TableView<Person> personTable = new TableView<Person>()
// Instantiating the personlist.
ObservableList<Person> persons = FXCollections.observableArrayList();
// Setting the list to the table.
personTable .setItems(persons)
final Button button = new Button("Refresh");
final Timeline repeatTimeLine = new Timeline(
      new KeyFrame(Duration.seconds(100), new EventHandler<ActionEvent>() {
            @Override
         public void handle(ActionEvent event) {
                // Call the service method to update the list.
                   PersonService.updatepersons(persons );
button.setOnAction(new EventHandler<ActionEvent>() {
     @Override
     public void handle(ActionEvent arg0) {
             repeatTimeLine.setCycleCount(Timeline.INDEFINITE);
             repeatTimeLine.play();
});And in the Service class...
public void updatepersons(final ObservableList<Person> persons){
          final Task<List<Person>> getPersonTask = new Task<List<Person>>() {
          @Override
          protected List<Person> call() throws Exception {
               return getPersonService().getPersons();
     getPersonTask .stateProperty().addListener(new ChangeListener<State>() {
          @Override
          public void changed(ObservableValue<? extends State> arg0, State arg1, State newState) {
               switch (newState) {
               case SUCCEEDED:
                    persons.clear();
                    persons.addAll(getPersonTask .getValue());
                    break;
               case FAILED:
                    break;
     ThreadManager.getInstance().schedule(this.getClass(), getPersonTask );
}I hope this code can give you some idea.
Happy Coding !! :)

Simple question about disabling Swing default Locale

Hi.
I am trying to disable the Japanese messages that appear in JDialogs. I am using a Japanese version of WinXP.
How do I do this? It would be good to do it programmatically and be totally platform and locale independent. I am trying to set messages to English.
I tryed resetting the default locale, which seemed to change the default, but made absolutely no difference to my program.
Many thanks in advance.

This code seems to change the keyboard itself to be US. That sounds pretty drastic. Would if affect other applications?
Perhaps you could explain a bit more about how JDialog knows what language to display its dialogs in. Why doesn't it work to change the locale of individual swing components?

Question About The New Task Bar!

Hi, I am thinking to upgrade into Yosemite, but i dont like the new taskbar. SO my question is can i upgrade to Yosemite and keep the task bar as it was in the Mavericks?

Sorry, no.
Best.

Question about disabling the IP cache

Hi,
There is TCL command for that. Check Pg 121 of UG835 - http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/ug835-vivado-tcl-commands.pdf
You can use -disable_cache switch to disable the cache for that IP.

I think I found what I need as part of solving a bigger issue.
The way to delete an individual cache entry is to find it first and then manually remove it, i.e. say $ip is the name of the IP whose entry we'd like to remove from the cache repository (could be regexp-searched prior to that).
Again, there is NOTHING in Xilinx user guides that indicates that check_ip_cache can be used to do this on an IP basis. The following 2 command to the trick.
set cache_loc [lindex [split [check_ip_cache [get_ips $ip]] ":"] 2]
file delete -force [current_project]/[current_project].cache/ip/$cache_loc

I have a question about my Apple ID which is my email

The email on which my Apple ID is associated with has been hacked
therefore i have made a new email address which i have changed all my online
accounts to. However im afraid to do so with Itunes im worried that i will
loose the apps and movies and song etc that i have purchased or if they will send an
email confirmation to the hacked email account.
can someone please help me as to what i should do and how i should do it?
Thank you

Hi Aysha84,
As long as this email that is your Apple ID does not end in mac.com, me.com or icloud.com you can change it as well as associate it with a different email address. That way you will retain control of all content from the Apple ID. See this article for how to change the Apple ID -
Change your Apple ID - Apple Support
Be sure to follow through with the steps in this article after you have changed the Apple ID -
Apple ID: What to do after you change your Apple ID - Apple Support
You may be worried about the security of your Apple ID. If so you may want to use two-step verification to increase security -
Frequently asked questions about two-step verification for Apple ID - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

MDT Task Sequence with standard "Create Task Sequence Media" image capture?

Hello,
After much research and a lot of exhausted attempts/hours between two of us we have broken down and decided to ask a very direct question. Is it possible to run an MDT Task Sequence with an image captured within SCCM and not MDT?
Reason for asking is the sequence fails every time with the error:
“Task Sequence: NAME has failed with the error code (0x80070490).”
I should note that there is no smsts log because it fails during the install and comes back with "no OS available" and there is no sccm client on the machine either. From what I could gather the error code is related to the HDD and I have tried
every setting within the task sequence I know of in different combinations to no avail. Which led us to wondering if maybe the whole process isn't even possible since we are using an MDT task sequence with an sccm image capture.
The standard task sequences work fine with the sccm image capture, but as soon as we try to the MDT sequence it fails. ANy advice/information/help on this is much appreciated.

I can't thank you enough, that was exactly it. I should have known that it would be something so simple, I've been going crazy looking through the task sequence properties trying to figure out what I could be missing.
No problem at all, happy to help! I was in the same boat driving myself crazy looking at the task sequence properties. I just happened to stumble upon that setting and decided to give it a shot since I had exhausted seemingly every other avenue.
Also, to answer your other question, in a standard task sequence, you can name the computer by using the collection variable "OSDComputerName". Just right click the collection you have your task sequence deployed to, choose properties, and then the collection
variables tab. Click the starburst, enter the variable name OSDComputerName, uncheck the box for "do not display" (I think that's the setting) and apply your changes. When you run your task sequence again, you'll choose your TS from the list, click next, double
click OSDComputerName (just clicking next will skip it and begin the TS), enter the computer name, click OK, and kick off your TS.
I'm still finding my way around SCCM since it was thrown into my lap with no prior experience so I'm happy to help when someone is stuck. I've been there more times than I can count and others have helped me.

HT5312 a question about the security-related emails

Excuse me.ive forgot my security questions and answers.and what was worse my yahoo e-mail(which is the security-related emails ) has been closed few days ago.could u help me?

The Three Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Administrator Account Disabled after sysprep and capture task sequence in MDT 2010

Hi
We are currently migrating from Windows XP to windows 7. As part of our migration we have 5 base Images (for different areas of the business)
Here is what we are doing:
Create a reference machine with the source files for windows 7 Pro x86
Install applications as part of the Task sequence to build a reference machine.
Make the updates to the machine - required for the build.
Run the Sysprep and capture template to take the capture of the Reference machine.
Import the Capture into the Operating system folder within MDT2010
Create a task sequecne to deploy the image.
Deploy the Image for Testing.
Deploy the image to a machine
Update the machine with the defects
Re Capture the deployed machine and call it ver2.wim
re deploy ver2.wim
Testers test
Defects logged + additional user settings to be captured in the build
Re capture and sysprep runs says the capture has been succesful however after a reboot the administrator account is disabled.
We cant seem to capture anything from here on in. Nothing has been changed in the unattend.
Autologon is set to enable the administrator account and the password is set to blank as this is then handled by policy when the machine is joined to the domain - we have not enabled the unattended join to the domain at this point in time but it will be
for deploying the image.
Have we got our image strategy wrong? does the same rule apply about sysprep running more than 3 times on a single machine if it is captured and redeployed after a sucessfully sysprep to the same hardware or even different hardware.

Hi,
    One of the things Sysprep/WAIK do is disable the adminsitrator account.
    You mentioned that you are setting the autologing to the administrator account and that you are setting it with a blank password, you can add a simple command in to sysprep's xml to reenable the account:
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
   Give it a try and let us know .
Best Regards, Marianok
Saludos, MarianoK
Disclaimer: While I do my best to make sure everything I post is accurate and safe, I’m certainly not perfect so all this information is provided "AS IS" with no warranties or guarantees and confers no rights. Any suggested steps or code provided should be
done under your own risk, I take no responsibilities if your system blows, the universe stops spinning, o nor for any other adverse consequence the information on this code might cause directly or indirectly.
Aclaración: Aunque hago lo posible por verificar que todo lo que posteo es correcto y seguro, Yo ciertamente no soy perfecto y puedo cometer errores, por lo tanto esta informacion es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún
derecho. Cualquier instrucción descripta o código incluido deben ser empleados bajo su propia responsabilidad y bajo su propio riesgo. No me hago responsable si sus datos se dañan, su si
Hi Marianok,
Thanks for your response and taking the time to read the topic we have raised. We believe we already have this step in place but perhaps we have it in the wrong area of the unattend.
Please find below our unattend file for the capture:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
<InstallFrom>
<Path>.\Operating Systems\Windows 7 Install Media x86\Sources\install.wim</Path>
<MetaData>
<Key>/image/index</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<UpgradeData>
<Upgrade>false</Upgrade>
</UpgradeData>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
<ProductKey>
<Key></Key>
</ProductKey>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username></Username>
<Domain></Domain>
<Password></Password>
</Credentials>
<JoinDomain></JoinDomain>
<JoinWorkgroup></JoinWorkgroup>
<MachineObjectOU></MachineObjectOU>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName></ComputerName>
<ProductKey></ProductKey>
<RegisteredOrganization>OurCompanyNameHere</RegisteredOrganization>
<RegisteredOwner>Windows User</RegisteredOwner>
<TimeZone></TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Description>Temp account</Description>
<DisplayName>Temp account</DisplayName>
<Group>Users</Group>
<Name>TempAccount</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain></Domain>
<Password>
<Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe C:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe D:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>2</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe E:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>3</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe F:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>4</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
<RegisteredOrganization>Ourcomapanynamehere</RegisteredOrganization>
<RegisteredOwner>Windows User</RegisteredOwner>
<TimeZone></TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog://pr-dep-03/captureshare$/operating systems/windows 7 install media x86/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Hope this helps!

As step in Task Sequence : Deleting all existing partitions on harddrive before partitioning, is it possible? Thoughts appreciated

Everyone,
I have just received a load of 100+ computers off corporate lease for the school district I manage, and while imaging them in SCCM, i've noticed that of those 100 computers about 7 or 8 have failed during the task sequence. Just on a guess, I tried
booting up off a windows 7 disk and physically deleting all partitions and THEN running the task sequence it fixes the issue and the task sequence jumps off/completes without any problems (which there's only been one main partition and one system reserve partition).
My question to you all, I want ALL computers that run my task sequences to completely wipe ALL partitions...and then go forward with the standard partitioning step that's in the task sequence (Step name Partition Disk 0 - BIOS, where it sets up a 350mb system
reserve and then a 100% remaining space NTFS windows Primary partition)
Can someone point me in the right direction? I feel this is a simple process to add to my task sequence, but I wanted to confirm with some of you that might can ease my anxiety a bit first.
Thanks so much!

as above, you could even use a prestart command to achieve this before displaying the task sequence however i'd be VERY careful about doing so, as you could end up wiping out a whole estate of computers without intending to if you deploy it to the wrong
collection or wrong query, far better to keep the logic in the task sequence as a scripted diskpart step (or two)
you can download a diskpart script and view the associated step in the
following task sequence
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Question about Disable Step Task Sequence

Similar Messages

Maybe you are looking for