Question about ESS Webdynpro application's context change

Hi All,
Is it possible to add new entries into the ESS(based on ECC5.0) Webdynpro application's context especially under 'SelectedInfotype' from the back end ECC5.0 system?
Kind regards,
Vijay

Hi Vijay,
You cannot modify Web Dynpro application from backend. You need to setup NWDI for modifying Web dynpro applciation for ESS/MSS. Please refer to this NWDI Cookbook for XSS.pdf in SAP Notes 872892.
Hope it helps
Regards
Arun

Similar Messages

Question about iCloud. How do I change my e-mail address, I have the wrong one and want to change it.

question about iCloud. How do I change my e-mail address, I got the wrong address.

There are a variety of options available to you, including creating an email "alias" or changing the email address associated with your iCloud ID.
For all practical purposes your iCloud email address and Apple ID are interchangeable. To change your Apple ID read Apple ID: Changing your Apple ID.
If you simply created an Apple ID in error, you might consider abandoning it altogether and creating a new one. On the other hand, if you already used that Apple ID to purchase iTunes or other digital content, don't create a new Apple ID, because any purchases you already made are inexorably linked to the Apple ID used to make them.

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

Custom fields in ESS webdynpro applications

Hi Experts,
Can you please suggest me where I am going wrong in this scenario? I have a standard application Family member application. We enhanced the infotype 0021 with new fields and corresponding fields are added in screen structures and HCMT_BSP_PA_JP_r0021. This is working fine in the backedn while creating a record in PA30. Standard application in webdynpro is working fine, after that I reimported the model in webdynpro and I can see these fields in my model, so I context binded them in controllers and then to view controllers. There are no errors in it. I added few fields in detail layout. Now when I deployed and run the application after these changes, it is opening up with bizcard view empty and the button for creating a new record showing up, which is not the case should be as I have record in the backend for the same subtype. When I clicked on New record, and even withought filling up required fields, I clicked on continue button, and it is failing giving runtime exception at review view.
Does anybody have any suggestions for me? am I doing the proper steps to make these custom fields available in the screen? does anybody have documentation for adding custom fields in ESS applications or any helpful links, please let me know, I really appreciate your time.
Thanks
Murty

Hi all,
this is lil wierd but the problem is solved in this way.., it might be useful for others, so here is the way I did..,
Once I downloaded the model, I invalidated cache and also, I restarted J2EE, invalidation of cache sometimes acting up i guess. Then build it once again if the service is working fine. After that model bindings, contaxt changes, code changes one at a time and in between after every lil step, I deployed and run the service again, so that I can back that small step if it didnt work out.., finally this was fixed.., but all this process seems wierd about this approach and tiresome too.
Thanks
Murty

Background colour change for WebDynpro Application has to changed

Hi All,
One of my custom built web dynpro application background color has to be changed, is it possible to do that?
Satish

Hi Satish,
Can u please go through the below link
how do i change the css of my webdynpro application?
Raghu

A question about ESS / MSS implementation.

Hi All,
Just a brief again about our landscape as:
1. We have an ERP ECC5.0 system which has J2EE6.40(add-in) without the 'EP' usage type and the present Support package level of the relevant ESS and MSS components are as follows:
a. J2EE6.40 Support Package level is '17'.(We are going to deploy the XSS components here)
b. ERP ECC5.0 system's Software Components details are as follows:
SOFTWARE COMPONENTS RELEASE LEVEL HIGHEST SUPPORT PACKAGE APPLIED
SAP_BASIS 640 0016 SAPKB64016
SAP_ABA 640 0016 SAPKA64016
SAP_APPL 500 0009 SAPKH50009
SAP_HR 500 0019 SAPKE50019
EA-HR 500 0005 SAPKGPHC05
2. We have a separate NW2004s(Dual stack(ABAP7.0+J2EE7.0) installation having EP7.0 with Support Package level is '16'. (We are going to deploy the Business Package for ESS & MSS here).
Here are my questions?
1. what is the best 'Support Package' level recommendation or combination is applicable for all the components(J2EE6.40,SAP_BASIS,SAP_ABA,SAP_APPL,SAP_HR,EA-HR...etc.,) involved in this type of mixed landscape - ESS & MSS implementation?
2. If we apply the higher Support Packages 'only' for the ERP ECC5.0 software components such as: SAP_BASIS,SAP_ABA,SAP_APPL,SAP_HR,EA-HR - what other ERP ECC5.0 software components would get impacted from functionality prespective ?(let us say if we keep the current Support Package level for other software components as untouched)
3. Is there any dependency exist from the Support Package point-of-view between the ESS MSS Business Packages and with XSS components(PCUI_GP; ESS; MSS)
4. Is there any dependency exist from the Support Package point-of-view between XSS components and ERP ECC5.0 software components such as "SAP_BASIS,SAP_ABA,SAP_APPL,SAP_HR,EA-HR"
Kindly address my above concerns.
Regards,
Vijay

Hi Vijay
To answer your questions
First you should check note 1007341 which helps consultants proposing this type of landscape
To answer some of your questions
1) For SPs you have to patch ERP 2004 components following ERP 2004 stack and patch
    ERP 2005 components following the ERP2005 stack recommendations at www.service.sap.com/sp-stacks
    in terms of equivalence levels I would select SP levels from each stack with similiar release dates
2) Presumably you will be using ERP2004 components in the front-end in some capacity therefore these
    ERP2004 components must be patched in line with ECC 500 stacks
3) There is dependancies between Business Packages and XSS
4) There is dependancies between back-end components SAP_HR and EA_HR and XSS/BP
    SAP_HR and EA_HR also have their own dependancies with the other back-end components listed
Best wishes
Stuart

Questions about a Bingo application

Hello, I'm new to programming and Java, so please excuse my lack of knowledge.
This Bingo application I'm creating pits two players with a bingo card. There are two issues that I'm having at the moment...
1. The cards contain 25 numbers and the character in the middle of the card should be a 'B' instead of a number. I've tried several things to try and get a character printed into the two dimensional array of integers, but the best I can get is the decimal number for 'B' to display. Is there an specific way of doing this?
2. The two cards can't have more than 5 numbers repeated between both of them. Both cards are displaying perfectly with the random numbers, but I can't come up with a useful algorithm to compare both two dimensional arrays. Any help on this, even if it's just a little push in the right direction, will be greatly appreciated.
Thanks.
Edited by: OkMD on Oct 11, 2008 12:12 AM

MD,
1. in the middle of the card should be a 'B' instead of a numberIf I had to represent "B" in an array of (otherwise) positive integers, I'd use 0, and if 0 is a valid value I'd use -66 (-1 * asciiValueForB).
BUT... I'd recommend you rethink your approach... Why does "B" have to be in the array at all... it obviously (being not an integer) doesn't belong in array of integers... so using a marker value to represent it is "a hack".
2. Two playing cards may have upto 5 numbers in common.Question: Is this intended to be an exercise in array manipulation? (or do you want the cheats way?) If you're not sure then take the cheats way... Except, how much do you know about collections? Anything? If nothing then we'd (probably) better stick to arrays for the time being.
Cheers. Keith.

Recent iMac Convert - Questions about Trash and Applications Icon on Dock

Any advice would be appreciated. 2 issues:
1. I transfered my windows files to my iMac today and having been cleaning up the various folders. I have deleted quite a few files and have opened and emptied the trash icon many times. From about 1 hour ago, the trash icon will no longer open when I single left click it, double left click it or right click it and select "Open". I can right click and select "Empty", but now I can not review what I am about to delete just in case I have accidently moved a file to the trash that I should not have.
2. On the right side of my dock I only have icons for Documents and the Trash. I thought I was supposed to also have an icon for Applications. How can I put Applications in its proper spot on the dock. I tried dragging the applications icon from Finder to the space on the dock between the documents icon and the trash icon, but it will not allow me to do so.
Any ideas?
Thanks for the help.

Same way. Navigate to /Home/ folder then drag the Documents folder to the right side of the Dock.
Visit the site reference I gave you. You may find a solution in the FAQ I mentioned.
You may also try the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Question about 'user process' in the context of Oracle

The following is an except from oracle documentation.
Overview of User Processes
When a user runs an application program (such as a Pro*C program) or an Oracle tool (such as
Enterprise Manager or SQL*Plus), Oracle creates a user process to run the user's application.http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/process.htm
As my understand, an user process is a piece of software that can connect to an oracle server. You (the user) can start a piece of this kind of software, then connect to oracle. If so, why Oracle creates a user process to run the user's application?
Thanks.
Edited by: Yang Shuai on Jul 6, 2011 10:20 AM

Hi. I would suggest reading the 11.2 Concepts manual: it is much improved:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/process.htm
This text is trying to say that the application starts a client process that can connect to the database. The database manages server processes and background processes; the application runs the client process.

Question about self defined Application monitoring object

Hi
I m trying to define my own monitoring objects, but what defined in the monitored system can not appear in solution manager(4.0). I have newest version of sap-a/pi , the ST-PI is 2005_1_700, any one can drop me some lines where coulde be the problem.
best regards

no one use self defined application monitoring?

Adding a new field in the ESS webdynpro application.

Hello All,
We are currently using the ECC 5.0 and Portal EP 6.0 SP18.
In the Family members Iview ( Web dynpro) there are different Items like Mother, Father, Child etc which we can add from the IMG. If we want to add new field ( SSN ) to the Spouse or Delete some standard given fields like Nationality in this Iview how can we achieve this. Please let me know. This is very urgent!
Thanks,
Chakri.

No problem - I already sent you the material.
If you still need some help then have a look at my tutorial, which you can download by using this link:
https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/teched-2006-sdn-day/sdnday_ess_hr.zip
Please note that it requires SDN logon to download the file.
Hope it helps,
Harald

Question about the Contacts application...

I'm trying to organize my contact list. I have an All contacts, and separate for my husbands phone and mine. I also have a Christmas list and I'd like to keep The XYZ Family as the name for that but not in my other contact lists. Is that possible??

Any contacts you add to any group you create will also exist in All Contacts. So, if you name a group XYZ Family, the individual contacts for the members of that group will still exist in All Contacts.
Also, individual contacts can be placed in multiple groups. For example, Joe XYZ's card can exist in your contacts and your husband's contacts and in the XYZ Family group.

Question about ADF JClient applications

I have a View object based on an Entity object that represents an activity done and that has an ID of a worker that does it as a foreign key. I would also like to show the worker's name on the form, but that is an attribute not included in the View object or the Entity object. Is there an equivalent of an Oracle Forms WHEN-VALIDATE-ITEM trigger in a JClient form that would permit me to do so?
Milos

Milos,
a View Object can be based on one or many Entity Objects. You can create a ViewObject that shows content from two tables, including the table containing the name of the worker. Alternatively you could use a query when creating a new attribute for the ViewObject that obtains the name of the worker. This would be a transient attribute.
You may find the following web page helpful
http://radio.weblogs.com/0118231/stories/
Same for
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
Frank

General Question about some acronym in EM Context

What the following acronym stand for
EMD its related to agent but what is the full form of it.
is it Enterprise Manager Data control or something else
PBS is it Platform base services or Platform basic services. or anything else.

I can't remember what EMD stands for but PBS stands for Platform Background Services.
-Mughees

ERROR In ESS WebDynpro with ERP2004 IDES System

Hi,
I have installed ERP2004 ECC 5.0 IDES version now i want to use ESS Application on Portal
i Deployed the JAVA Components for ESS on the WAS 6.40 J2EE Server the componets are succesfully deployed.
i also cofigure the SLD and JCO destination for ESS which is according to SAP Help.
now my problem was when i test any of the ESS Webdynpro application using
http://<host>:<Port>/webdynpro/welcome
and login into webdynpro content administrator and expanding sap.com
while running any of the ESS application from deployed content it's gives following common error for all application, no application is works
error:---
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC sap.com/essaraddr:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, <b>host=PWDFM026.wdf.sap.corp</b>)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, <b>host=PWDFM026.wdf.sap.corp</b>)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC],
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.pcuigp.xssfpm.wd.model.types.Ext_Service could not be loaded: com.sap.dictionary.runtime.DdException:
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:205)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:471)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
Caused by: com.sap.dictionary.runtime.DdException:
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:89)
     at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:408)
     at com.sap.dictionary.runtime.ProviderFactory.resolveLogicalNameToJCODestination(ProviderFactory.java:354)
     at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider
look at the webdynpro application host type it's shows
PWDFM026.wdf.sap.corp
i think this host are taken from R3 Side since the ERP2004 is IDES version, but my host was different
if there is problem with host how can i changed this host setting
if enything else i mising than plese help me to solve this
regards,
kaushal

Hi,
Go to technical landscapes and create a technical landscape for your ECC backend system.
This should solve the problem.
Regards
Bharathwaj.

Question about ESS Webdynpro application's context change

Similar Messages

Maybe you are looking for