Question About Roles for the viewonly user

Hi I am trying to configure user with viewonly permissions to WLI 10.3 worklistconsole (worklist console-> view tasks). i did add the following groups to the user.
Monitors
Operators
Integration Monitors
Integration Operators
Integration users
i am able to start/stop servers (Admin Server,ms1 and ms2) but unable to view worklist console tasks.
Any help will be appriciate
Thanks
Ksr
Edited by: ksr11 on May 24, 2010 3:01 PM

Recycle domain fix the problem

Similar Messages

Roles for the System user

Hi All,
Currently, I am working on AII 5.1 Slap and Ship Outbound scenario and got the document from the service marketplace under http://service.sap.com/rfid -> SAP AII 2007.
Under Activating HTTP Services(Page no: 9 - 9th step) section , we have to provide the System user. May I know what all roles we have to assign for that user?
Regards
Sara

Hi Sara,
We need to use a System/Communications User in there. Though there is no clear thought on what authorizations are required for the same.
You can ask your basis guys to give a Systems user for restrictive access. This might be based on the policy of the basis team of what auths are generally given for a System user for a restricted use. You can use the same.
If this causes problems you can assign the user, the AIN related admin roles mentioned in the same document. This will work.
I have created a user called ALEREMOTE which is of the type Communications data with profile assigned SAP_ALL. This works for me perfectly.Though if you want you can give in a restricted access to as i have already mentioned.

Simple question I think ( for the expert users of this group)

In a tabular layout form, when I insert a record, I want a database item, for example b1.aa ( b1 is the database block) to begin with 1( if there are no records inserted yet) and increases automatically, like a sequence.
1,2,3, 4 ....
how can I do this?
in a when - new item instance trigger maybe?
where? on the block or on the item?
and which is the right code?
Thank you all

Hi Champion
place ur code in when- new- record- instance at block level and increment it with the value required.
Thank you
Sasi

Extract the userID that set a role for a specific user

Hi all @SAP Forums,
I'm going to write a simple report to extract some information about users and role assignments in the system I'm working on.
The requirements is quite simple; for every user in the USR02 table, I have to extract some info about the roles the user has.
In order to do so, it's quite straightforward to find roles for a particular user looking into the AGR_USERS table, but ... I'd like to know if there's a way to find the user who set the role assignment for that specific user; the problem is that I cannot find that information in any AGR* tables, so I start to think it's not a stored information I can retrieve in any way.
Any hints/suggests you can give me? Thanks in advance.

Hello muthu,
useful link to refer to when I'll need to extract a full username (first and surname) for a userId. But the question, forgive me if I've been not-so clear, was different.
A (key) user, say A123456, sets a role for another user (A00000) in SRM... let's suppose now A00000 becomes a buyer. I'd like to know if there's a way, starting from the user A00000, to understand WHO had given him his role (in this case, A123456) and WHEN... I can see the CHANGE_DAT field in AGR_USERS about the "when"... where can I (if I can, obviously) find WHO set the role for A00000 ?
Thanks again, sorry if I've been not that clear in explaining

After a quiz can you show the questions and answers for the user to review from passing the quiz

After taking a quiz, is there a way to show the questions and answers for the user to review from passing the quiz.
And the ones who has failed the quiz would be directed to the first slide again to take the quiz over.
Thanks

Rod
I see that information about adding the review quiz button but on that last slide where it shows results, I want it jump back to slide 1 but it jumps to the first question of the slide. Is there a way around that?

Questions for the end users in Building an application.

Questions for the end users in Building an application.
Hello,
I am assigned a project in building a CF application. As far
as the business requirements, I have an idea from the MIS people.
However, I have a meeting with direct users and I have to ask
questions to add to my requirements. I am still a beginner in this
but I need to ask questions.
Can anyone give me tips? what basic / important questions?

For starters,
DO:
Ask them to discuss what they want to do with the application
Try to understand their level of computer literacy
Keep your conversation non-technical
Continue to interact with the users during the design and
development process
Try to identify a "champion" with whom you can interface as the
project progresses
DON'T:
Use technical terms or discuss technical issues
Talk down to them
Promise delivery dates until you have documented their
requirements and they have approved them

Information about the default setup for the demo user

Hi,
Can anyone guide me the properties which we have to set for the below
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
And what exactly they represent
Regards,
Krishna

Krishna,
It's pretty obvious...
db.adminUser = the username of a dba user in your database
db.demoUser = the username of the demo user that will get created
db.demoUser.password = the password that will be used for the demo user
db.demoUser.tablespace = the default tablespace for the demo user
db.demoUser.tempTablespace = the default temporary tablespace for the demo user
You don't have to change any of them.
John

Microsoft Word Has Not Been Installed for the Current User

Hi, everybody
I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
Routes tried and failed...
1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
-Kent S.
Be strong as a ship and wise as a whale

These questions are really best in the Microsoft Office Forums.
These are MS Office Questions not ZEN Questions.
Novell did not design Microsoft's Office Install.
I have nothing against snapshots, but it does not work great with the Office
installs, which you yourself know since you are posting here with problems
based on that.
And your other method you are trying with the break out is not working well.
We also know that from experience.
We can tell you that the way most people install it and the way most people
succeed doing it, is by doing it the way recommended and designed by
Microsoft.
ZEN does that just fine.
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"KentFSmith" <[email protected]> wrote in message
news:[email protected]...
>
> Thank you, Grimlock (-Grimlock?-)
>
> Through a google search I encountered a very close suggestion, and the
> poster said they couldn't remember the name of a MS utility but that
> there was one that would break out the individual MSIs from the Office
> 2007 setup.exe bundle. The dependent app appears to be a simple and
> possibly elegant solution, but without a good way to break out the MSIs
> I don't see how to do anything other than with a config.xml ('Config.xml
> file in the 2007 Office system'
> (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
>
> Do you know of that utility and where I can find it?
>
> There is a lot of history here now of just doing the individual
> applications. Everyone gets Word and Excel, but much fewer get
> PowerPoint and Access. All other reasons aside, a compelling one is the
> reduced number of help calls to the Help Desk here. Occasionally we
> also just run the whole Office install for someone who needs some of the
> odd utilities, but that is easily cost-justifiable for us to break them
> out as exceptions. Otherwise, we focus 90% of our support on just Word
> and Excel and it pays off nicely.
>
> If we switch to putting full Office 2007 on all PCs then there may be a
> better approach that include other tools than ZfD, such as the fact that
> we replace 1/3 of all PCs in the organization each year (so that no
> hardware is more than 3 years "behind"). We could put 1/3 of all Office
> 2007 installs into the new PC image. But we still need to support all
> the use of the apps after the install, so ZfD MUST work well, it simply
> MUST work well or we're screwed, to use the vernacular. Also, just
> switching from what we've been doing for years -- single app orientation
> -- means introducing new-ish issues that have to discover and explain to
> our comrades, and to adjust our orientation with unknown future costs.
>
> But that may end up being the simplest adequate solution. And that's
> what I want.
>
> -K
>
> grimlock;1883526 Wrote:
>> Craig Wilson wrote:
>> > You should really focus on #1.
>> > Snapshot is not the way to go.
>> >
>> > Details about what is Not working or what random behavior may help
>> folks.
>> > Ask in the MS forums may help too. dont' mention zenworks.
>> > Just say you are installing as Administrator from a share and getting
>> these
>> > errors.
>> >
>> > While not 100% accurate, it should be good enough to get some good
>> feedback.
>> >
>>
>> Nor is installing 1 app at a time. Install the whole suite, have an
>> icon for each app that runs the exe for that app with a dependency on
>> the another app that points to the installer msi.
>>
>> If any user runs any app, it will run if the executable is there
>> (meaning it's been installed). If the executable is not there then it
>> calls the dependent application (the installer app) and installs it,
>> and
>> then runs it.
>
>
> --
> KentFSmith
> ------------------------------------------------------------------------
> KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
> View this thread: http://forums.novell.com/showthread.php?t=391573
>
>

Enter a password for the ADMIN user,Error in installing Oracle Apex,

hi, everybody,
Greetings,
Iam trying to install oracle Apex, By coming this step it shows this error, Could you Please help me to solve this error.
SQL> @apxchpwd.sql
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
l_error_lines wwv_flow_global.vc_arr2;
ERROR at line 3:
ORA-06550: line 3, column 28:
PLS-00201: identifier 'WWV_FLOW_GLOBAL.VC_ARR2' must be declared
ORA-06550: line 3, column 28:
PL/SQL: Item ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 6, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 6, column 5:
PL/SQL: Statement ignored
ORA-06550: line 7, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 7, column 5:
PL/SQL: Statement ignored
ORA-06550: line 15, column 31:
PLS-00201: identifier 'WWV_FLOW_SECURITY.STRONG_PASSWORD_VALIDATION' must be
declared
ORA-06550: line 15, column 5:
PL/SQL: Statement ignored
ORA-06550: line 22, column 35:
PLS-00201: identifier 'WWV_FLOW_UTILITIES.STRIPHTML' must be declared
ORA-06550: line 22, column 9:
PL/SQL: Statement ignored
ORA-06550: line 25, column 9:
PLS-00320: the declaration of the type o

suresh.m2015,
It's going to be impossible for anyone in this forum to help with your issue if you don't provide any more detail about your environment and Apex installation. However, from your post it looks like the Apex database objects are missing or invalid.
Did you follow the Apex installation guide step by step? For example, did you run apexins.sql?
It's important to follow the documentation. The script you are running to change the admin user password should not be run until after the Apex installation is complete.
--Keith Malay

Standard WebClient UI business role for the CRM 7.0

Hello Gurus
where can we get the below mentioned thing....i tried in service market place but i did not get
The predefined authorization roles are provided as attachment BP_CRM_ROLES.ZIP to the collective note of this SAP Best Practices version. Download and unzip the roles to your local directory
after dowloading we need to uplaod in to PFCG roles
(The purpose of this activity is to copy a standard WebClient UI business role and to assign a new authorization role to it. The WebClient UI business role is designed to centralize the authorizations, navigations, and content of the CRM WebClient UI.
The business roles will be adapted to the Best Practices scenario scope)
i am struck of ove here
regards
Sreeram

Hi Sreeram,
The roles you want to assign to the user you have to select for your scenario. The best practice role assigned to an user to navigate to the webclient. The other roles you assign to the user to give authoraization for your scenario. If you will go to C04 document you can get the standard roles which will be assigned to one particular user. For the standard user let sal SALES_MAN we assign the standard roles as peer the best practice as SAP_CRM_UIU_FRAMEWORK ,SAP_CRM_OR_ADMIN, SAP_CRM_OR_USER and BP_SLS_MANAGER. If you need other authorization for the user then copy the standard role and assign the authorization manually in transaction PFCG.
Hope this will help you.
Thanx
Chinmaya

Question about setup_MITE in the PCI-MIO-16E-1

I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
natinst.public.daq.driver-development.general
Christian
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Mandatory Authorization object for the BO user

Dear All
I am facing some problem for the BO user.
can you let me know what are mandatory Authorization object for BO user to run the dashboard without error.
Fast reply appreciate.
Thanks
Haji

Dear All
i am working for Analysis Authorization.
i included Analysis Authorisation object to the user.
S_RS_AUTH BI Analysis Authorizations in Role.
when i checked in the BW side its working fine.
when i checked the user in the BO side.
filter values are coming correct, but the values in the column are not showing.
its throwing an error.
kindly help me to solve this issue.
Thanks
Haji

Reporting tools for the Business user - Crystal reports or BEx tools ?

Hi,
We have recently implemented BI/BO infrastructure. Scope of the inital implementation was an executive dashboard based off COPA data. We have used Xelcisus for dashboard and BEx tools for query design etc.
We would like to set up some of our key business users (analysts in respective functions) to be able to write their own queries off this COPA cube. The discussion point is whether to roll out Crystal reports for business users or have them trained on BEx tools i.e BEx query designer/analyzer.
Any inputs to my question "Crystal Reports or BEx tools for the Business users - pros and cons", is appreciated.
Thanks,
Girish

Our user currently do not have anything. It's fresh implementation. We would like to get the business users involved. The question is - what's the best start for a business user - Crystal Reports or Bex ?

Question about IPC for CRM 5.0

Hi ,
I have a question about CRM 5.0 with relation to the IPC .
As we know the IPC will be available internally from CRM 5.0 , but we would like to know if the internal IPC will be distributed with different applications or will it be one IPC for all the different applications .
Thanks in advance
BR//
Ankur

Hi Ankur,
See my reply in your another thread Question about IPC for CRM 5.0
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

How to define roles for the reports that i have created using WAD?

Hi all,
Can anyone let me know how to define roles for the reports generated using WAD. And what is the procedure for creating and defining roles. Is this process take care of Bw consultant nor the basis guys.
Can anyone let me know the entire procedure about the roles in bw 3.5
thanxs
haritha

Following links might helps you
create a role
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&

Question About Roles for the viewonly user

Similar Messages

Maybe you are looking for