Question for inverse routine in the transformation for a virtual infocube

Hello,
I have a virtual infocube with it transformation and i want to know if there is a way to know in the inverse routine or in the start routine if in the query the user is selecting a filter value.
When the user want to select one value for a characteristic the transformation is executed in order to obtain the infoprovider values. In this moment the inverse routine is executed and i want to know if there is a way to identify when the user is making a drilldown or a filter.
In the start routine of the transformation i have an abap code with a very expensive time of execution to obtain some key figures values but i dont want that this abap code will be executed when the system executed the transformation to obtain the values for one characteristic in order to make a filter.
Thanks in advance for your help.
Best regards.
Ignacio

Hi Ashish,
Your document is very useful, in fact I used it to write my abap code, now Iu2019m getting the values of the query selection conditions, but what I need is after the report is showed in the first time.
When data in report is showed, user has the possibility to filter values for one characteristic. If the characteristic has the option for filter value selection during query execution equal to u201COnly Values in infoprovideru201D , the inverse routine is executed to obtain the values that are contained in the infoprovider and then the system show all the possible values. What I need is to identify this event, because in this case I donu2019t want to make some calculations in the transformation that are very expensive in time.
Thanks a lot for your information.
Best regards
Ignacio

Similar Messages

ABAP routine in the infopackage for Multiple Selection

Hi experts,
I want to include a abap routine in the infopackage for Multiple Selection so that I can fetch only the required Material Numbers when the InfoPackage is schedule. As I have the constraints that I have to select certain Material Numbers only, that are not in series - so I cannot select"BT' fuction. Tell me what ABAP Code will work in this scenario.
Kind regards,
Rajesh Giribuwa

Hi,
The Routine will have to use 'EQ' operator and Append each selections to the Structure.
ABAP Routine
InfoPackage definition for Bespoke SIS Structure
Infopackage routine !
Regards
Happy Tony

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

HT5312 I forgot the answers for the security questions and I want send the answers for my email

I forgot the answers for the security questions and I want send the answers for my email

Contact iTunes Support:
Go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
   Then select 'iTunes Store', and on the next screen select 'Account Management'
   Next choose 'Apple ID Account Security' and fill in that you'd like your security
   questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)
2. Once your questions have been reset, and you set up new ones, also set up a RESCUE EMAIL ADDRESS, so if you forget them again, you won't have to go through all of this.....
Cheers,
GB

Problem with READ Statement in the field routine of the Transformation

Hi,
I have problem with read statement with binary search in the field routine of the transformation.
read statement is working well when i was checked in the debugging mode, it's not working properly for the bulk load in the background. below are the steps i have implemented in my requirement.
1. I selected the record from the lookuo DSO into one internal table for all entried in source_packeage.
2.i have read same internal table in the field routine for each source_package entry and i am setting the flag for that field .
Code in the start routine
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
     and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp <> 3.
delete it_zcam where end_dt initial.
sort it_zcam by surce accno.
endif.
field routine code:
read table it_zcam with key source = source_package-source
                                             accno = source_package-accno
                                             binary search
                                             transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.
this piece of code exist in the other model there its working fine.when comes to my code it's not working properly, but when i debug the transformation it's working fine for those accno.
the problem is when i do full load the code is not working properly and populating the wrong value in the RESULT field.
this field i am using in the report filter.
please let me know if anybody has the soluton or reason for this strage behaviour.
thanks,
Rahim.

i suppose the below is not the actual code. active table of dso would be /bic/azcam_o1100...
1. is the key of zcam_o11 source and accno ?
2. you need to get the sortout of if endif (see code below)
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp 3.
delete it_zcam where end_dt initial.
endif.
sort it_zcam by surce accno.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.

My laptop is connected to company LAN on wire and I have another active wifi connection provided by a router. Can I use the wifi connection for mozilla connection and the wired for everything else? I'm on Win7.

I have 2 simultaneous active connections:
no1: wired connection to company lan; private IP 172.19..
no2: wireless connection to unrestricted traffic router; private IP: 192.168...
my question: can I use the wireless connection for mozilla traffic and the wired for everything else?
I'm on Windows7 Prof, all security updates installed.

Go to Control Panel > Network and Internet > Network and Sharing Center >
Click Change adapter settings from left panel > Open the network connection you want to change the DNS servers for by right click and select Properties > Select
Internet Protocol Version 4 (TCP/IPv4) and click Properties button > Choose the
Use the following DNS server addresses > enter the IP address for a
Preferred DNS server as well as an Alternate DNS server.
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4
This IP belongs to Google public DNS.
Note: Wired connections are usually labeled as Ethernet, while wireless ones are usually labeled as
Wi-Fi or Wireless Network Connection.
Uncheck Internet Protocol version 6
Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

HT204053 i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

It is not possible to merge Apple IDs.

What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

iCloud Mail Settings

In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

Hi
Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
REgards
Malathi

[svn:fx-trunk] 11548: MXFTEText. css now has a type selector for FTEDataGridItemRenderer that matches the one for DataGridItemRenderer in the MX default .css file.

Revision: 11548
Author:   [email protected]
Date:     2009-11-06 16:35:27 -0800 (Fri, 06 Nov 2009)
Log Message:
MXFTEText.css now has a type selector for FTEDataGridItemRenderer that matches the one for DataGridItemRenderer in the MX default.css file. Both set paddingLeft to 5.
QE notes: None
Doc notes: None
Bugs: SDK_22741
Reviewer: Alex
Tests run: ant checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/MXFTEText.css
    flex/sdk/trunk/frameworks/spark-manifest.xml

AN UPDATE ON MY ISSUE:
It appears to be limited to Dreamweaver. When I upload the files to my server and use BrowserLab or Microsoft SuperPreview the pages are rendering properly in all versions of IE. It's only broken when viewing in Design view within Dreamweaver or when using BrowserLab from within Dreamweaver. So at least I know my website works, which is a huge relief, but does anyone have any idea why Design view would complete ignore my styles? It's very annoying.

I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

sjrozas wrote:
I'm only trying out the subscription. Thanks for being so concerned about my finances.
Sent from my mobile.
Your initial post indicated that you had a CC subscription. That seems to imply that you have subscribed. If you hadn't already purchased Lightroom 6 I would suggest that you wait until you decide about CC. You really don't need both because the Lightroom program is precisely the same except for Lightroom 6 without the creative cloud has no Lightroom mobile capabilities. But I was only trying to help.

Looking for free resources on the web for Primaver

I am looking for free sources on the web for Primavera. I
want to study the program.

Primavera Support can give you access to a free one
day web based training class if you have a current
license.

On my iphone 5 ios8, i have an apple id for App store and a defferent id for Icloude. i forgot the pw for the icloude id. how can i reset or delete icloude ?

on my iphone 5 ios8, i have an apple id for App store and a defferent id for Icloude. i forgot the pw for the icloude id. how can i reset or delete icloude ?

Greetings chaimba216,
After reviewing your post, I located an article that can help with resetting your iCloud password:
iCloud: Change your iCloud password
Your iCloud password protects the privacy of the information (such as your email) stored in iCloud. Your password also protects your ability to locate or remotely erase your device using Find My iPhone. You should regularly change your iCloud password to protect your information. Your iCloud password is the password for the Apple IDyou use to sign in to iCloud.
Important: If you use the same Apple ID for iCloud as you do with other Apple services such as the Apple Online Store, iTunes Store, App Store, or to purchase products in iPhoto or Aperture, changing your iCloud password also changes your password for these services. Make sure you sign in to those locations using your new password.
Go to the My Apple ID website (appleid.apple.com) and follow the instructions to reset your Apple ID password.
For more information, see the Apple Support article Apple ID: Changing your password.
After changing your iCloud password, make sure you update it on all your devices and in any email apps you use to get your iCloud email.
On your iPhone, iPad, or iPod touch: Go to Settings > iCloud, then tap your iCloud account.
On a Mac: Choose Apple menu > System Preferences, then click iCloud.
On a Windows computer: Open iCloud for Windows.
In your email apps: Check the help provided for the email apps you’re using.
If you set up iCloud on your iPhone, iPad, or iPod touch, make sure to set up a passcode lock on your device for added security. (Go to Settings > Passcode or Touch ID & Passcode.)
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

2-3 things to watch out for when SAP is the source for a Data Warehouse

Hello
What are 2-3 things to watch out for when SAP is the source for a Data Warehouse (Informatica for ETL and Cognos for reporting)?
Thanks
G. Vijay

Going through some or all of this might help:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464
Many, including me, have also followed the advice given by others here to add DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.220
208.67.220.222
Click on Apply Now and close the window.
Restart Safari, and repair permissions.

How can i fix a member for a dimension in the transformation file?

Hello everybody,
anyone knows how can I fix a dimension member using the *mapping section of the transformation file in a data upload, I´m trying to fix the member for the Category dimension, I´ve tried an instruction like:
*MAPPING
*CATEGORY=ACTUAL
but it doesnt work, any idea?
thanks!

The easiest way is to use the folloowing in the Transformation file:
Category = *newcol(Actual)
Hope this jelps.

Question for inverse routine in the transformation for a virtual infocube

Similar Messages

Maybe you are looking for