Question for load VRML file with scale and position missed

Hi,
I trid to read a .wrl file from the "load VRML" vi, most simple .wrl models can be correctly read but for some more compliacted models their scales and positions were incorrect.
I attached the file which I read the .wrl file and a car model from Matlab Virtual Reality toolbox. The file can be read but their position and scale was missed. I check this model on other VRML readers and I believe the car model is correct. Does anyone know how to fix this problem?
Thanks,
-Alex
Attachments:
VRMLproblem.zip ‏88 KB

Hi Yi Y,
Thanks for your reply.
The attached files are the correct .wrl file and the one read from LabVIEW.
The colored is incorrect, the car is seperated to some parts, and the scale of some of the parts are wrong.
I think you can use any .wrl reader to read the wrl file I posted, all the reader I tried can read it successfully besides LabVIEW.
In the vi I have you can try to adjust the scale or rotate it then I think you can find the seperated car parts.
I will appreciate if you can give me any suggestion. Thanks,
-Alex
Attachments:
original.JPG ‏110 KB
readfromLabView.JPG ‏74 KB

Similar Messages

Path problem for "Load VRML File.vi" in EXE

Hello,
The new integrated 3d Picture Control functionality in LabVIEW 8.20 is amazing. It is a really easy to use implementation of OpenGL. I've discovered one bug/issue when building VI's to an exe that includes the 3d Picture Control:
If "Load VRML File.vi" is used, in the executable, you will encounter a LabVIEW Error 7 due to a path problem in the following vi:
NI_3D Picture Control.lvlib:Load VRML File.vi->NI_3D Picture Control.lvlib:NI_Old 3D Toolkit.lvlib:Read WRL file.vi->NI_3D Picture Control.lvlib:NI_Old 3D Toolkit.lvlib:Initialize.vi
The File Not Found problem will prevent the vrml file from loading. Navigating down into the subVI's of the "Load VRML File.vi" shown above easily reveals the problem. I've included a screenshot of the diagram of that VI. The relative
path resulting from the double "Strip Path" operation is not valid
in the executable. I'm not sure where that "definitions" file resides
in the runtime deployment or if it's even included, so fixing the path to account for the differences in the exe vs. development environment path is not an option. I'm also usually very hesitant to make any mods to anything in vi.lib.
For the development environment, the "definitions" file can be found at: [LabVIEW 8.2 dir]\vi.lib\picture\3D Picture Control
The easy fix is to include the "definitions" file in the same directory as your exe when you build. Fortuitously, this does the trick because the first strip path gives the path to the exe and then the second strip path results in the path to the directory where the exe resides.
Hopefully NI will fix this path reference properly in future revisions.
Enjoy!
Attachments:
WRL Debug.jpg ‏77 KB

Hi Chris,
Thanks a lot for the feedback! This was reported to R&D (# 47F9DJIQ) for further investigation.
Regards,
Justin D

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Trying to load flash file in iWeb and when I enter info in the "html snippet" box a "missing plug-in" message comes up (although i have adobe flash player in, if that's the plug-in they're looking for). Anyone have any similar problems or solution. Thanks

I'm trying to load flash file in iWeb and when i enter info in the "html snippet" box a "missing plug-in" message comes up (although i have Adobe Flash player installed, if that's the plug-in they're looking for). Anyone have any similar problems or solutions. Thanks

when i publish my site and vew it the page on the web it just comes up with the file name w/ the ,swf and the "mising plug-in" message below. if i click on the file name it displays the flash file but gigantic (the entire height of the page).totally perplexed!
anyway, here is the code.
<object classid=”clsid:D27CDB6E-AE6D-11cf-96B8-444553540000”codebase=”http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0, 40,0”width=”244” height=”221” id=”ETrade_banner_Gumby_replay”><paramname=movie value=”ETrade_banner_Gumby_replay.swf”><param name=qualityvalue=high><param name=base value=”.”><embed src=”ETrade_banner_Gumby_replay.swf”quality=high width=”244” height=”221” name=”ETrade_banner_Gumby_replay”align=”” type=”application/x-shockwave-flash” pluginspage=”http://www.macromedia.com/go/getflashplayer”base=”.”></embed></object>

Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

Yes - well you have to make the file in a word processing Application.
You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine. You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
You can also make appointments at your local Apple store for individualized help (if a store is nearby)

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Loading Vrml files in Swing using java3d loader

I've got problems loading Vrml files in Swing using java3d vrmlLoader. It seems to be only able to load vrml files that contains simple geometry like squares, cones etc. But when it comes to complicated shapes like IndexedFaceSet, its a blank. Does anyone know why?
What are the points to note when loading vrml files? Doesn't the code:
vrmlLoader = new VRML97Loader(VRML97Loader.LOAD_ALL);
and
scene = vrmlLoader.load(loadUrl);
load the entire vrml file? Is there any comprehensive tutorial or example that I can refer to? The fly through in Java 3d demo is too complicated. I'm still pretty new to this field. Thanks.

Did you download the example VRML file I had listed?
First make sure you test it with that one...it that works
then maybe the VRML file you are using is not version
#VRML V2.0 utf8
...Actually, I think you'd get some parsing error if you
used a VRML v1.0, so that probably is not the issue.
Do you have the vrml97.jar file in you path, maybe?
Check you path in Windows by typing "path" in command window. If you have the vrml97.jar file then
that's cool...if not then you must add it to your path.
OR you can temporarily compile by invoking
the -classpath <path> command....I think you'll have to
do the same when running the code....so do:
javac -classpath PUTPATHHERE TestVrml.java
java -classpath PUTPATHHERE TestVrml
If that doesn't work, do you have Java 3D installed?
just checking...
I'm kind of lost as to what to do beyond that....by the way, I double checked my files and and recompiled and
reran them and they work fine. I've also checked them
on a different computer at work and they work their too.
So, long story short, it's something wrong on your end either with the java install or the vrml97.jar file not being in the path...I don't know much more.
Let me know if anything worked.
Mariusz Zaczek ([email protected])

Failed to load XML file with Content ID 'XYZ'

Hello,
We are using UCM Version:11.1.1.8.1DEV-2014-01-06 04:18:30Z-r114490 (Build:7.3.5.185) with site studio for creating templates and web sites.
While switching to contribution mode, we find 'Failed to load XML file with Content ID 'XYZ' error.[Here XYZ is the local checkin content]
In region we are using dynamic converter to convert the style of native document here below are region and its element details.
<region id="region3" name="Add_Content_Here" flags="1111111100100" metadata="xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue" dccommand="ssIncDynamicConversionByRule(SS_DATAFILE, 'Colleges_Template_Rule')">
      
      <element id="region3_element1" name="Editor" label="Editor" type="1" flags="111111111111111111111100000111100000000000001111001110111010001111101000000000000000000000000000">
        
        <linktoregioncontent createnewxml="true" createnewnative="false" choosemanaged="true" chooselocal="false" choosenone="false">
          <choosemanagedquerytext corecontentonly="FALSE">
            <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
          </choosemanagedquerytext>
        </linktoregioncontent>
      </element>
      <switchregioncontent createnewxml="true" createnewnative="true" choosemanaged="true" chooselocal="false" choosenone="false">
        <createnewnativedoctypes >
          <![CDATA[.doc,.docx,.txt,.rtf]]>
        </createnewnativedoctypes>
        <choosemanagedquerytext corecontentonly="FALSE">
          <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
        </choosemanagedquerytext>
        <defaultmetadata >
          <![CDATA[xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xCollegesList%3AisHidden%3Dtrue%26xShowInStudents%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xArticleSection%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue%26dpTriggerValue%3DCSE]]>
        </defaultmetadata>
      </switchregioncontent>
    </region>



Regardrs,
Syed

Hi Syed ,
Add the following trace sections :
requestaudit,sitestudio*,system + Full verbose tracing
Clear the server output .
Replicate the same steps and once error shows up , refresh server output and copy the logs to a text file and upload here .
Thanks,
Srinath

Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
http://adobe.ly/10ZjpE4

Terry,
I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
Thanks.
Vaclav

How to call sql loader ctrl file with in the pl/sql procedure

Hi Friends,
I am doing a project related with the transferring data using queues. In the queue , I will get a tab delimited data in the form of CLOB variable/message. I do want to store that dat in the oracle table.
When updating data into the table ,
1. Don't want to write that data into a file.( Want to access directly after dequeueing from the specfic queue).
2. As the data is in tab delimited form, I want to use sql loader concept.
How do I call the sql loader ctrl file with in my pl/sql procedure. When I searched , most of the forums recommending external procedure or Java program.
Please Guide me on this issue. my preferrence is pl sql, But don't know about external procedure . If no other way , I will try Java.
I am using oracle 9.2.0.8.0.
Thanks in advance,
Vimal..

Neither SQL*Loader nor external tables are designed to read data from a CLOB stored in the database. They both work on files stored on the file system. If you don't want the data to be written to a file, you're going to have to roll your own parsing code. This is certainly possible. But it is going to be far less efficient than either SQL*Loader or external tables. And it's likely to involve quite a bit more code.
The simplest possible thing that could work would be to use something like Tom Kyte's string tokenization package to read a line from the CLOB, break it into the component pieces, and then store the different tokens in a meaningful collection (i.e. an object type or a record type that corresponds to the table definition). Of course, you'll need to handle things like converting strings to numbers or dates, rejecting rows, writing log files, etc.
Justin

Load/download files with a MAC

We have oracle iFs 9.0.1 Win 2000
The users are using ftp and windows explorer to load and download the files with Windows and NT OS. Now we have a user with MAC.
How can he load/download the files, I dont have any mac to test?

hii, plz use this code ...
theResponse.setContentType("application/download");
theResponse.setHeader("Content-Disposition", "attachment; filename= \""+"StudentReport.pdf"+"\"");

Can't open Files with MIDI and WAV Tracks

Hey All,
I can't open some files anymore. They seem to be files that have MIDI drum tracks and WAV tracks. It seems to try to load the MIDI sound 2 times, then NOTHING. I have to click the GB icon in the dock to get the window to show, BUT then the play, rr, ff, ect buttons don't show, and the close, minimize buttons don't respond. The menu bar is REAL twitchy and you can't click on anything. I have to force quit the app. I have tried loading other files with just WAV tracks and they open fine, and some files with fewer(2) number of MIDI tracks.
I have opened these files before just to listen to them and play with settings but i didn't save them. I have repaired permissions and cleaned the cache, ect. with OnyX.
Anyone have any ideas?

UPDATE
Talked to Apple Support and we went through all the Rapair Permissions, Clean Cache, Prefs, Ect. Finally saw that when I switched to Project Mode, THAT was Freezing the Garageband Screen. (The Files that were screwed were saved in the Project Mode, so when they opened up they were still in the Project Mode) We Finally unplugged all External things and Rebooted to Safe Mode, and then tried again.
And 2 and a half hours later Garageband now works fine. Nice to have apple techs stuborn enough to keep going.

I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

Question about opening a file with Quicktime..

Hello,
I would like to open some audio files with QuickTime and not iTunes.
With Panther I used to select ALL the files i needed to modify and then select the default app. for opening them (in this case QuickTime)
Now that I'm running Tiger when I do that all the INFO of each files opens up and I have to make the change one by one.
Any idea?
Many Thanks

Use Option-Get Info.
I don't think this changed from Panther to Tiger, however.

Unzipping files with .car and .sar extension.

Hi,
I'm searching in http://help.sap.com the download for unzipping files with .car and .sar extension.
What is the exact name of the file do that?
The SAP release is 4.7 non unicode 32 bit.
Best regards

http://help.sap.com
click on SAP R/3 and R/3 Enterprise then on Installation & Upgrade Guide, insert user and psw,
click on Downloads tab, click on Download (left side of the web page), click on Support Packages and Patches, and then on Search for Support Packages and Patches, put SAPCAR as search term.

Question for load VRML file with scale and position missed

Similar Messages

Maybe you are looking for